| Q3938-67943 |
ADF - Automatic document feeder (ADF) whole unit assembly |
| Q3938-67994 |
ADF - ADF maintenance kit - Includes the ADF paper pick-up roller assembly and the separation pad assembly |
| Q3938-67998 |
ADF - ADF Unit CM6030/6040 Spare |
| Q3938-67999 |
ADF - ADF MAINTENANCE KIT ADF maintenance kit - Includes the ADF paper pickup roller assembly and the separation pad assembly |
| Q7829-67917 |
ADF - ADF float assembly |
| Q3938-60131 |
ADF Feed Assembly - Automatic document feeder (ADF) whole unit assembly |
| Q7842-67944 |
ADF Roller Kit - ADF Maintenance Roller Kit CE487A ADF Maintenance Kit Includes ADF Paper Pick-up Roller Assembly & Separation Pad Assembly. Estimated yield 75K pages. |
| 4A3-1763-000CN |
Arm - Front adjustment arm - Located on the folding roller on the saddle assembly |
| 4A3-1764-000CN |
Arm - Rear adjustment arm - Located on the folding roller on the saddle assembly |
| RC1-9189-000CN |
Arm - Arm, 1st estrangement |
| RC1-9913-000CN |
Arm - Lock arm - For the 1 x 500-sheet paper input tray - Mounts on the lock shaft |
| RL1-1272-000CN |
Arm - Auxiliary arm - Mounts on the drive frame on the intermediate paper transfer unit (IPTU) |
| RM1-4411-000CN |
Arm - T2 guide arm assembly |
| 4S3-1050-000CN |
Bearing - Ball bearing (6902ZZNR) |
| XG9-0586-000CN |
Bearing - Ball bearing - Located on the fixing one way gear assembly |
| Q3938-67935 |
Belt - Transmission timing belt - Maintain constant speed during power transmission - Located on the transmission assembly |
| Q3938-67965 |
Belt - Image Transfer Kit 150K Intermediate transfer belt (ITB) assemblyIntermediate transfer belt (ITB) assembly |
| Q3938-68001 |
Belt - Intermediate transfer belt (ITB) assembly HP Color LaserJet Transfer Kit. CP6015/CM6030/CM6040 TRNFR Kit prints approximately 150, 000 pages |
| RC1-9674-000CN |
Belt - Paper feed cogged belt |
| RM1-3307-000CN |
Belt - Intermediate transfer belt (ITB) assembly HP Color LaserJet Transfer Kit. CP6015/CM6030/CM6040 Transfer Kit prints approximately 150, 000 pages |
| RM1-3307-040CN |
Belt - Intermediate transfer belt (ITB) assembly HP Color LaserJet Transfer Kit. CP6015/CM6030/CM6040 TRANSFER Kit prints approximately 150, 000 pages |
| RM1-3307-080CN |
Belt - Assy-Intermediate Transfer Belt |
| RM1-3684-020CN |
Belt - Drive belt assembly - Drives the paper feed belt |
| XF2-1607-860CN |
Belt - Timing cogged belt - Runs on ejection stack motor assembly (M32) |
| XF2-1608-840CN |
Belt - Timing belt - Located on the return roller assembly |
| XF2-3837-340CN |
Belt - Timing belt - Belt that runs on the 30-tooth pulley on the saddle assembly |
| XF9-0748-000CN |
Belt - Timing cogged belt - Located on the front side plate on the finisher main body |
| FU5-1169-000CN |
Bushing - Bushing - Attaches to the rear tray side plate - Located next to the 26-tooth gear on the tray drive shaft assembly |
| RC1-4585-000CN |
Bushing - Bushing - Located on the side cover assembly (four needed) |
| RC1-8734-000CN |
Bushing - Bushing - Located on the registration second transfer assembly |
| RC1-9915-000CN |
Bushing - Bushing - Mounts on the lock shaft next to the arm lock on the 1 x 500-sheet paper input tray |
| 4G1-2283-000CN |
Cable - Cable, saddle unit |
| 4G1-2285-000CN |
Cable - Sensor cable - Located on the saddle tray assembly - Connects on the photo interrupter (TLP1242) |
| 4G3-1777-000CN |
Cable - Staple connecting cable assembly |
| 5851-2501 |
Cable - Hard drive power SATA cable - Provides power to the hard drive connects to the mother board |
| FG3-2892-000CN |
Cable - Cable, solenoid |
| FG3-2903-000CN |
Cable - Cable, operation tray |
| Q3938-67912 |
Cable - Flat cable, 28, 940, A |
| Q3938-67913 |
Cable - Flat cable, 28, 970, B |
| Q3938-67942 |
Cable - PCIe Cable - Connects to the SCUID board on havic assembly |
| Q3938-67948 |
Cable - ADF cable assembly - Interconnects the ADF assembly to the flatbed scanner assembly |
| Q3938-67992 |
Cable - ADF cable assembly - Interconnects the ADF assembly to the flatbed scanner assemblyADF cable assembly - Interconnects the ADF assembly to the flatbed scanner assembly Replaced: Q3938-67948 |
| RC1-9306-000CN |
Cable - Cable guide ´A´ |
| RG5-1928-000CN |
Cable - Registration cable assembly - Includes 7P and 3P connectors |
| RK2-1354-000CN |
Cable - Laser flexible flat cable - Connects the laser driver PCA through (J501B) connector and the DC controller PCA through (J127) connector |
| RK2-1355-000CN |
Cable - Laser flexible flat cable - Connects to the laser driver PCA through (J501A) connector and the DC controller PCA through (J126) connector |
| RK2-1356-000CN |
Cable - Flexible flat cable - Connects to the formatter board through the (J9001) connector and to the DC controller PCA through (J123) connector |
| RM1-3217-000CN |
Cable - Fixing motor cable |
| RM1-3383-000CN |
Cable - Toner feed motor (M17) cable |
| RM1-3385-000CN |
Cable - Toner feed motor (M16) cable |
| RM1-3389-000CN |
Cable - Control Panel cable |
| RM1-3390-000CN |
Cable - Face-down unit 1 cable |
| RM1-3391-000CN |
Cable - Face-down unit 2 cable |
| RM1-3560-000CN |
Cable - Drawer cable - Locaten on the fin lock assembly in the intermediate feed main body |
| RM1-3561-000CN |
Cable - Intermediate paper transfer unit (IPTU) drawer connector cable assembly - Located on the fin lock assembly |
| RM1-3563-000CN |
Cable - Motor cable - For media feed stepping DC motor (M202) |
| RM1-3564-000CN |
Cable - Motor cable - For media feed stepping DC motor (M201) |
| RM1-3571-000CN |
Cable - Paper pick-up option drawer cable |
| RM1-3572-000CN |
Cable - Pick-up option door switch cable |
| RM1-3573-000CN |
Cable - Pick-up option PCA connect cable |
| RM1-3574-000CN |
Cable - Option sensor PCA connect cable |
| RM1-3575-000CN |
Cable - Paper pick-up option cable - Used for the 1 x 500-sheet input tray |
| RM1-3576-000CN |
Cable - Pick-up option lifter unit cable |
| RM1-3599-000CN |
Cable - MFP AC cable - Has connector J3005 on one side and J301 on the other |
| RM1-3610-000CN |
Cable - DC controller board power cable |
| RM1-3612-000CN |
Cable - Fixing joint cable |
| RM1-3617-000CN |
Cable - Front cable - Connetcs the environment sensor, the delivery unit cooling fan, the cartridge front area cooling fan, and the VOC fan to the DC controler PC board |
| RM1-3618-000CN |
Cable - Rear lower cable |
| RM1-3619-000CN |
Cable - Rear upper cable |
| RM1-3620-000CN |
Cable - Scanner joint cable |
| RM1-3622-000CN |
Cable - Panel joint cable |
| RM1-3623-000CN |
Cable - Interface joint cable |
| RM1-3624-000CN |
Cable - Color plane registration joint cable |
| RM1-3630-000CN |
Cable - Multi-purpose/tray 1 cable |
| RM1-3640-000CN |
Cable - Waste toner sensor cable |
| RM1-4409-000CN |
Cable - Fuser bias cable assembly |
| RM1-5029-000CN |
Cable - Cable, fixing open sensor |
| RM1-5030-000CN |
Cable - Cable, tp/t2 open sensor |
| RM1-3253-000CN |
Cage - Formatter board cage assembly - Metal shield and enclosure for the formatter board |
| U2014E |
Care Pack - HP Network Install high-end LaserJet Multifunction printer Service |
| UJ165E |
Care Pack - HP 3 year Next business day Onsite Color LaserJet CM6030/40MFP Hardware Support |
| UJ166E |
Care Pack - HP 4 year Next business day Onsite Color LaserJet CM6030/40MFP Hardware Support |
| UJ167E |
Care Pack - HP 5 year Next business day Onsite Color LaserJet CM6030/40MFP Hardware Support |
| UJ168E |
Care Pack - HP 3 year 4 hour response 9x5 OnsiteColor LaserJet CM6030/40MFP Hardware Support |
| UJ169E |
Care Pack - HP 3 year 4 hour response 13x5 OnsiteColor LaserJet CM6030/40MFP Hardware Support |
| UJ170E |
Care Pack - HP 4 year 4 hour response 9x5 OnsiteColor LaserJet CM6030/40MFP Hardware Support |
| UJ171E |
Care Pack - HP 4 year 4 hour response 13x5 OnsiteColor LaserJet CM6030/40MFP Hardware Support |
| UJ172E |
Care Pack - HP 5 year 4 hour response 9x5 OnsiteColor LaserJet CM6030/40MFP Hardware Support |
| UJ173E |
Care Pack - HP 5 year 4 hour response 13x5 OnsiteColor LaserJet CM6030/40MFP Hardware Support |
| UJ174PE |
Care Pack - HP 1 year Post Warranty Next business day Onsite Clr LaserJet CM6030/40MFP Hardware Support |
| UJ175PE |
Care Pack - HP 1 year Post Warranty 4 hour response 9x5 OnsiteColor LaserJet CM6030/CM6040MFP Hardware Support |
| UJ176PE |
Care Pack - HP 1 year Post Warranty 4 hour response 13x5 OnsiteColor LaserJet CM6030/40MFP Hardware Support |
| UJ189E |
Care Pack - HP MKRepl Color LaserJet CM6030/40MFP and CP6015 Color printer fuser 110V Service |
| UJ191E |
Care Pack - HP Maintenance Kit Replacement Color LaserJet CM6030/40MFP ADF Service |
| UJ192E |
Care Pack - HP MK Repl Clr LaserJet CM6030/40MFP and CP6015 Color printer TransferKit Service |
| UJ573E |
Care Pack - HP MK Replacement Color LaserJet CM6030/40MFP and CP6015 Color Roller Kit Service |
| UL411E |
Care Pack - HP 3 year Next business day Onsite Defective media retention CLJ CM6040/6030MFP Support |
| UL412PE |
Care Pack - HP 1 year PW Next business day Onsite Defective media retention CLJ CM6040/6030MFP Support |
| UL624E |
Care Pack - HP Secure Hard Disk Installation and Startup Service |
| UT829PE |
Care Pack - HP 2 year Post-Warranty Next business day onsite Color LaserJet CM6030 6040MFP Hardware Support |
| UT980E |
Care Pack - HP 4year Next business day Onsite + Defective Media Retention Color LaserJet CM6040/6030 MFP Support |
| UU861E |
Care Pack - HP 5year Next business day Onsite + Defective Media Retention Color LaserJet CM6040/6030 MFP Support |
| UU927PE |
Care Pack - HP 1 year Post Warranty Phone Assist High-end Multifunction LaserJet printer Service |
| CB380A |
Cartridge - HP 823A LaserJet Black Toner Cartridge - Average cartridge yields 16,500 standard pages |
| CB381-67901 |
Cartridge - Cyan print toner cartridge - For the Color LaserJet CP6015 series |
| CB381-67901 |
Cartridge - Cyan print toner cartridge - For the Color LaserJet CP6015 series |
| CB381A |
Cartridge - Cyan print toner cartridge - For the Color LaserJet CP6015 series |
| CB382-67901 |
Cartridge - Yellow print toner cartridge - For the Color LaserJet CP6015 series |
| CB382-67901 |
Cartridge - Yellow print toner cartridge - For the Color LaserJet CP6015 series |
| CB382A |
Cartridge - Yellow print toner cartridge - For the Color LaserJet CP6015 series |
| CB383-67901 |
Cartridge - Magenta print toner cartridge - For the Color LaserJet CP6015 series |
| CB383-67901 |
Cartridge - Magenta print toner cartridge - For the Color LaserJet CP6015 series |
| CB383A |
Cartridge - Magenta print toner cartridge - For the Color LaserJet CP6015 series
|
| CB384A |
Cartridge - HP CLJ Black Image Drum CB384ABlack imaging drum - For the Color LaserJet CP6015 series |
| CB390-67901 |
Cartridge - Black toner cartridge - Prints approximately 19,500 standard pages |
| CB390-67901 |
Cartridge - Black toner cartridge - Prints approximately 19,500 standard pages |
| CB390A |
Cartridge - Black Cartridge for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| CE301-67901 |
Cartridge - HP Color LaserJet Cyan Print CartridgeCyan print toner cartridge - For the Color LaserJet CP6015 series |
| CE302-67901 |
Cartridge - HP CLJ Yellow Print CartridgeYellow print toner cartridge - For the Color LaserJet CP6015 series |
| CE303-67901 |
Cartridge - HP CLJ Magenta Print CartridgeMagenta print toner cartridge - For the Color LaserJet CP6015 series |
| CE304-67901 |
Cartridge - HP CLJ Black Image Drum CB384ABlack imaging drum - For the Color LaserJet CP6015 series |
| Q3931-67926 |
Cartridge - Cartridge interface assembly |
| Q3938-67910 |
Case - Power supply case assembly - Case where power supply mount (Not the power supply unit) |
| Q3938-67984 |
Case - Power supply case assembly - Case where power supply mount (Not the power supply unit) |
| RM1-3232-000CN |
Case - Thermopile case assembly |
| 4A3-6322-000CN |
Caster - Universal Caster |
| RC1-9896-000CN |
Caster - Double lock front caster - For the 1 x 500-sheet paper input tray |
| RC1-9917-000CN |
Caster - Stationary rear caster - Mounts on the bottom frame of the 500-sheet high capacity input (HCI) paper feeder assembly |
| RC2-1315-000CN |
Caster - Caster - Used on pedestal assembly (universal) |
| RC3-2994-000CN |
Caster - Rear Caster - For The 1x500-Sheet Paper Deck Assembly |
| WT2-5694-000CN |
Clamp - Snap-in cable clamp |
| 5090-3379 |
Cleaner - Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills |
| XD9-0233-000CN |
Clip - Retaining E-ring |
| XD9-0234-000CN |
Clip - E-Type retainer ring |
| 4H3-0370-000CN |
Clutch - Electromagnetic shutter clutch (CL31) connector (J1046) |
| VS1-7177-002CN |
Connector - Fuser electrical connector |
| VS1-7177-003CN |
Connector - Retaining clip - This is a retaining clip for fuser thermistor power cable |
| VS1-7257-012CN |
Connector - Drawer Connector (J1903) - For the 1 x 500-sheet input tray |
| VS1-7258-007CN |
Connector - Drawer connector - Connector located on bottom of tray assembly frame on right side, which connects tray assemblies to each other |
| Q3938-67963 |
Control Panel - Control panel assembly - Control buttons and display located on top front of printer |
| Q3931-67905 |
Cover - Face down cover - Output paper cover on top of the printer - Holds the paper after it has been printed |
| Q3938-67920 |
Cover - Upper cover - Plastic cover that protects the upper left side of the ADF unit |
| Q3938-67921 |
Cover - ADF lower cover - Plastic cover that protects the lower left part of the ADF unit |
| Q3938-67922 |
Cover - Upper cover - Plastic cover that protects the upper right side of the ADF unit |
| Q3938-67923 |
Cover - ADF lower cover - Plastic cover that protects the lower right part of the ADF unit |
| Q3938-67924 |
Cover - ADF top cover - Plastic cover that protects the top part of the ADF unit |
| Q3938-67925 |
Cover - ADF rear cover - Plastic cover that protects the rear part of the ADF unit |
| Q3938-67926 |
Cover - Front cover - Plastic L-shaped cover were control panel snaps on |
| Q3938-67927 |
Cover - Plastic screw covers with an adhesive back - Covers screw heads that secure the plastic scanner top cover |
| Q3938-67945 |
Cover - ADF rear end cover assembly - End cover (cap) |
| Q3938-67946 |
Cover - ADF front end cover assembly - End cover (cap) |
| Q3938-67954 |
Cover - Pickup & Feed Roller Assembly. Roller cover - Plastic cover that protects the ADF pick-up roller |
| Q3938-67970 |
Cover - ADF jam access cover - Located on the left top side of the printer - To remove paper jam from the ADF |
| RC1-8527-000CN |
Cover - Multi-purpose/tray 1 blanking cover |
| RC1-9201-000CN |
Cover - Paper tray cassette back end cover - Protects the back end of the cassette tray rail |
| RC1-9211-000CN |
Cover - Cover, main switch |
| RC1-9336-000CN |
Cover - Left cover assembly - Plastic cover that protects the left side of the printer |
| RC1-9340-000CN |
Cover - Cover, face-down Face down cover - Output paper cover on top of the printer - Holds the paper after it has been printed |
| RC1-9344-000CN |
Cover - Left rear cover - Plastic cover that protects the left rear part of the printer - Corner cover with slot for I/O connectors |
| RC1-9348-020CN |
Cover - Internal right cover |
| RC1-9350-000CN |
Cover - Upper front cover - Large rectangle shaped plastic cover located on left side on the top of the printer |
| RC1-9351-000CN |
Cover - Paper delivery cover |
| RC1-9360-000CN |
Cover - Cover, face-down drive |
| RC1-9511-000CN |
Cover - Cover, motor for HP HP Color LaserJet CP6015 Printer |
| RC1-9649-000CN |
Cover - Blanking cover - Located next to the four bushings on the drive frame |
| RC1-9666-000CN |
Cover - Back cover - Located on top of the shield plate on the intermediante feed main body |
| RC1-9667-000CN |
Cover - Intermediate feed switch cover |
| RC1-9705-000CN |
Cover - Left cover assist - Located on the lower guide assembly |
| RC1-9706-000CN |
Cover - Right cover assist - Located on the lower guide assembly |
| RC1-9871-000CN |
Cover - 1 x 500-sheet paper input tray rear cover |
| RC1-9872-000CN |
Cover - 1 x 500-sheet paper input tray left cover |
| RC1-9873-000CN |
Cover - 1 x 500-sheet paper input tray upper front cover |
| RC1-9874-000CN |
Cover - 1 x 500-sheet paper input tray lower right cover |
| RC2-1278-000CN |
Cover - Rear cover - Plastic cover that protects the rear part of the stapler/stacker unit |
| RC2-1279-000CN |
Cover - Connector tray cover - Mounts on the upper left side of the rear cover on the stapler/stacker unit |
| RC2-1280-000CN |
Cover - Lower left cover - Mounts on the saddle tray assembly |
| RC2-1347-000CN |
Cover - Slide cover - Plastic cover that slide in to the upper height panel on the stapler/stacker unit |
| RC2-1351-000CN |
Cover - Lower internal cover (stapler/stacker only) |
| RL1-1210-000CN |
Cover - Rear cover - Plastic cover that protects the rear part of the printer |
| RL1-1280-000CN |
Cover - Right lower cover assembly |
| RL1-1284-000CN |
Cover - Top cover assembly - Protects the top part of the main printer chassis |
| RL1-1321-000CN |
Cover - 3 x 500-sheet paper input tray right front cover |
| RL1-1322-000CN |
Cover - 1 x 500-sheet paper input tray right front cover |
| RL1-1477-000CN |
Cover - Lower internal cover assembly - Internal cover for the saddle assembly - For the booklet maker unit only |
| RM1-3233-000CN |
Cover - Left side wall cover assembly |
| RM1-3239-000CN |
Cover - Right side wall cover assembly |
| RM1-3357-000CN |
Cover - Front cover assembly - Plastic cover that protects the front door assembly |
| RM1-3357-030CN |
Cover - Front Cover Assy |
| RM1-3683-000CN |
Cover - Lower left side cover assembly - Located on the intermediate feed main body |
| RM1-4119-000CN |
Cover - Middle height cover assembly for the booklet maker unit |
| RM1-4123-000CN |
Cover - Inner cover assembly - Inner cover located on the left side of the finisher main body |
| RM1-4129-000CN |
Cover - Upper left cover assembly - Plastic cover that protects the upper left side of the booklet maker |
| RM1-4179-000CN |
Cover - Left upper cover assembly - For the stapler/stacker |
| RM1-4404-000CN |
Cover - Internal front door cover assembly - Plastic cover located behind the front door assembly |
| RM1-4408-000CN |
Cover - Rear cover assembly - Plastic cover that protects the rear air duct |
| RM1-4415-000CN |
Cover - Rear right cover assembly |
| RM1-5950-000CN |
Cover - Fuser fan cover assembly - Plastic cover located next to the rear cover assembly |
| RM1-5953-000CN |
Cover - Front internal small cover assembly - Located on the upper right side of the front door assembly |
| 5851-1822 |
Cradle - Cradle-disk drive |
| RM1-6642-060CN |
DC Controller - DC controller PC board assembly - Mounts on the rear of the print engine frame on the right side of the formatter board |
| FB3-7928-020CN |
Deflector - Paper deflector (flapper 1) - Shaft with curved deflector fingers - Attaches to the front and rear saddle side plate |
| FB5-2697-000CN |
Deflector - Paper deflector (flapper 2) - Shaft with curved deflector fingers - Attaches to the front and rear saddle side plate |
| RM1-3293-000CN |
Delivery - Face down paper delivery assembly |
| RM1-3293-010CN |
Delivery - Face down paper delivery assembly |
| RM1-4130-000CN |
Delivery - Saddle paper delivery assembly |
| Q3938-67953 |
Diverter - ADF diverter assembly - Diverts paper to duplexer assembly, face up tray or face down delivery assembly |
| Q6998-67901 |
Door - Front door assembly - For the stapler/stacker unit |
| Q6999-67901 |
Door - Front door assembly - For the booklet maker unit |
| RC1-9884-000CN |
Door - 1 x 500-sheet paper input tray tape door |
| RC1-9921-000CN |
Door - Stock door - For 1 x 500-sheet paper input tray |
| RM1-3333-000CN |
Door - Right door sub assembly |
| RM1-3537-000CN |
Door - 3 x 500-sheet paper input tray right door assembly |
| RM1-3538-000CN |
Door - 1 x 500-sheet paper input tray right door assembly |
| RM1-4121-000CN |
Door - Upper cover assembly - Top door located on the stapler/stacker assembly |
| RM1-3240-000CN |
Drawer - Intermediate transfer belt (ITB) drawer assembly |
| 0950-4768 |
Drive Assembly - 80GB SATA hard drive - 7,200 RPM, 3.5-inch form factor, 26.1mm height |
| Q3931-67911 |
Drive Assembly - Main drive assembly - Mounts on the right side of the printer - Metal plate with gears attached - Also known as main gear drive assembly |
| Q3931-67912 |
Drive Assembly - Toner cartridge drive assembly - Metal plate with gears attached - Provides movement to the yellow and magenta cartridges |
| Q3931-67913 |
Drive Assembly - Toner cartridge drive assembly - Metal plate with gears attached - Provides movement to the yellow and magenta cartridges |
| Q3938-67971 |
Drive Assembly - Hard drive - High performance SATA 3.5 EIO serial ATA hard drive |
| Q3938-67978 |
Drive Assembly - Hard drive - High performance SATA 3.5 EIO serial ATA hard drive |
| Q3938-67985 |
Drive Assembly - 80GB SATA Hard Drive 2.5 Hard Drive for Hewlett Packard Color MFP models. |
| RM1-3222-150CN |
Drive Assembly - Lifter drive assy |
| RM1-3280-000CN |
Drive Assembly - Intermediate transfer belt (ITB) estrangement drive assembly |
| RM1-3366-010CN |
Drive Assembly - Drive assembly - For use with multi-purpose/tray 1 |
| CB384-67901 |
Drum - Black imaging drum - For the Color LaserJet CP6015 series |
| CB384-67901 |
Drum - Black imaging drum - For the Color LaserJet CP6015 series |
| CB385-67901 |
Drum - Cyan imaging drum |
| CB385-67901 |
Drum - Cyan imaging drum |
| CB385A |
Drum - Hp Color LaserJet cyan image drum 824a |
| CB386-67901 |
Drum - Yellow imaging drum |
| CB386-67901 |
Drum - Yellow imaging drum |
| CB386A |
Drum - Hp Color LaserJet yellow image drum 824a |
| CB387-67901 |
Drum - Magenta imaging drum |
| CB387-67901 |
Drum - Magenta imaging drum |
| CB387A |
Drum - Hp Color LaserJet magenta image drum 824a |
| RC1-8961-000CN |
Duct - Air duct - Deflects air from fan FM7 |
| RC1-8964-000CN |
Duct - Face down joint duct - Located behind the fuser assembly |
| RC1-9276-000CN |
Duct - Cartridge duct - Plastic duct that vents air from the fan (FM3) to the cartridge area |
| RC1-9309-000CN |
Duct - Scanner fan duct - Directs air into scanner area |
| RC1-9334-000CN |
Duct - Duct, scanner for HP HP Color LaserJet CP6015 Printer |
| RM1-4401-000CN |
Duct - Intermediate transfer belt (ITB) duct assembly |
| Q3938-67937 |
Fan - Cooling fan - Fan that cools the scanner controller board (SCB) area |
| Q3938-67938 |
Fan - Cooling fan - Fan that cools scanner area |
| Q3938-67939 |
Fan - Cooling fan - Fan that cools the control panel area |
| RK2-1377-000CN |
Fan - Cooling fan - Provides air to the print cartridge and imaging drum area |
| RK2-1378-000CN |
Fan - Fuser cooling fan (FM2) - Provides air to the fuser area |
| RK2-1382-000CN |
Fan - Delivery unit cooling fan (FM7) |
| RM1-3364-000CN |
Fan - Exhaust fan assembly - Cools the fuser area |
| RM1-4394-000CN |
Fan - Chassis fan assembly - Located on the intermediate feed main body - Includes fan and plastic fan bracket (FM8) |
| Q3701-60014 |
Fax Module - Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter boardHP LaserJet analog fax accessory 300 |
| RM1-3665-000CN |
Feeder - Duplexing feed assembly |
| RM1-4109-000CN |
Feeder - Saddle paper feeder assembly - Includes saddle motor assembly and lower entrance guide assembly - For the booklet maker |
| RM1-4136-000CN |
Feeder - Saddle paper feeder assembly - Includes saddle motor assembly and lower entrance guide assembly - For the stapler/stacker |
| Q3931-67906 |
Filter - Air filter kit for HP Color LaserJet CM6040 MFP |
| RC1-9313-000CN |
Filter - Air filter - Located on the upper right side of the printer behind the upper right cover |
| RL1-1291-000CN |
Filter - Air filter - Located on the upper right side of the printer behind the upper right cover |
| Q3938-67966 |
Fixing Assembly - Hewlett Packard fuser assembly kit / 110-127V FIXING assy Kit Part Number, Fuser Assembly - Bonds toner to paper with heat - For 110VAC to 127VAC (+/- 10%) operation. |
| FB3-7925-030CN |
Flag - Roller flag - Mounts next to the 39-tooth pulley on the saddle assembly |
| FB3-7979-000CN |
Flag - Flag sensor - Located on the rear saddle side plate |
| FB5-5937-020CN |
Flag - Flag sensor - Located next to the ball bearing (6902ZZNR) - Mounts on the rear saddle side plate |
| FM2-0718-000CN |
Flag - Entrance sensor flag assembly - Includes the entrance sensor lever and the entrance sensor arm damper |
| Q3938-67951 |
Flag - ADF paper sensor flag |
| RM1-4391-000CN |
Flag - Face down full flag assembly |
| RM2-5849-000CN |
Flag - Finisher entrance sensor flag assembly |
| Q7829-67909 |
Foam - ADF reflector foam - White plastic sheet with foam that reflects the light wile scanning |
| Q7829-67943 |
Foam - ADF reflector foam - White plastic sheet with foam that reflects the light wile scanningADF reflector foam - White plastic sheet with foam that reflects the light wile scanning |
| RC1-9208-000CN |
Foot - Chassis rubber foot |
| CB457A |
Fuser Assembly - Hewlett Packard fuser assembly kit / fixing assembly kit |
| CB457A |
Fuser Assembly - Hewlett Packard fuser assembly kit / fixing assembly kit |
| CB457A |
Fuser Assembly - Hewlett Packard fuser assembly kit / fixing assembly kit |
| CB457A |
Fuser Assembly - Hewlett Packard fuser assembly kit / fixing assembly kit |
| CB457A |
Fuser Assembly - Hewlett Packard fuser assembly kit / fixing assembly kit |
| CB457A |
Fuser Assembly - Hewlett Packard fuser assembly kit / fixing assembly kit |
| CB457A |
Fuser Assembly - Hewlett Packard fuser assembly kit / fixing assembly kit |
| CB457A |
Fuser Assembly - Hewlett Packard fuser assembly kit / fixing assembly kit |
| CB457A |
Fuser Assembly - Hewlett Packard fuser assembly kit / fixing assembly kit |
| CB458A |
Fuser Assembly - HP Color LaserJet 220volt Fuser Kit Prints approximately 100, 000 pages.CP6015/CM6030/CM6040 220V Fuser Kit. |
| Q3931-67914 |
Fuser Assembly - 110-127V FIXING assy Kit Part Number, Fuser Assembly - Bonds toner to paper with heat - For 110VAC to 127VAC (+/- 10%) operation. |
| Q3931-67915 |
Fuser Assembly - Fussing assembly - For 220 VAC to 240 VAC - Bones toner to the paper with heat |
| Q3931-67927 |
Fuser Assembly - Fussing assembly - For 220 VAC to 240 VAC - Bonds toner to the paper with heat |
| Q3931-67935 |
Fuser Assembly - 110-127V FIXING assy Kit Part Number, Fuser Assembly - Bonds toner to paper with heat - For 110VAC to 127VAC (+/- 10%) operation. |
| Q3931-67936 |
Fuser Assembly - Fusing assembly - For 220 VAC to 240 VAC - Bonds toner to the paper with heat |
| Q3931-67940 |
Fuser Assembly - Hewlett Packard fuser assembly kit / 110-127V FIXING assy Kit Part Number, Fuser Assembly - Bonds toner to paper with heat - For 110VAC to 127VAC (+/- 10%) operation. |
| Q3931-67941 |
Fuser Assembly - Fusing assembly - For 220 VAC to 240 VAC - Bonds toner to the paper with heat |
| RM1-3242-000CN |
Fuser Assembly -
Hewlett Packard fuser assembly kit / 110-127V FIXING assy Kit Part Number, Fuser Assembly - Bonds toner to paper with heat - For 110VAC to 127VAC (+/- 10%) operation. |
| RM1-3244-000CN |
Fuser Assembly - Fuser Assembly - Bonds toner to paper with heat - For 220VAC to 240VAC (+/- 10%) operation |
| 4S3-0171-000CN |
Gear - 50-tooth gear - Located on the saddle assembly |
| FS5-3576-000CN |
Gear - 30-tooth gear for HP CM6049 Series |
| FS6-0814-000CN |
Gear - 16-tooth gear/32-tooth pulley - Located on the rear part of the lower pass guide next to the 32-tooth gear/16-tooth pulley |
| FS6-0815-000CN |
Gear - 32-tooth gear/16-tooth pulley - Located on the drive support in front of the motor (M5) |
| FS6-0822-000CN |
Gear - 16/33-tooth gear - Runs on the shaft located under the folding roller |
| FS6-0823-000CN |
Gear - 16-tooth gear - Runs on the shaft located under the folding roller |
| FS6-0829-000CN |
Gear - 16/56-tooth gear - Runs on the folding roller next to the front adjustment arm |
| FS6-0830-000CN |
Gear - 16-tooth gear - Runs on the folding roller next to the front adjustment arm |
| FU5-0428-000CN |
Gear - 30-tooth gear - Runs on the timing belt on the finisher lower roller next to the 20-tooth pulley |
| FU5-0435-000CN |
Gear - 44-tooth gear - Mounts on the front tray side plate attached to the upper tray cross member |
| FU5-0454-000CN |
Gear - 40-tooth gear - Runs on the swing press shaft assembly - Located between torque limiter and bushing on the rear side plate of the finisher |
| FU5-0457-000CN |
Gear - 17-tooth gear - Attaches to the rear tray side plate |
| FU5-2399-000CN |
Gear - 29-tooth gear - Runs on the paper feeder motor assembly |
| RC1-8925-000CN |
Gear - Damper gear - Mounts next to the fuser one way gear assembly |
| RU5-0790-000CN |
Gear - 83/25-tooth gear - Mounts on the fuser motor plate |
| RU5-0791-000CN |
Gear - 34-tooth gear - Mounts on the fuser motor plate |
| RU5-0868-000CN |
Gear - 22-tooth gear - Small gear that runs on the paper-feed cogged belt |
| RM1-3247-020CN |
Gear Assembly - Fuser one way gear assembly |
| RM1-3682-000CN |
Gear Assembly - Damper gear assembly - Includes 70-tooth gear and one way hinge - Located on the damper assembly |
| Q3938-67906 |
Glass Assembly - Scanner glass assembly - Glass plate on which the documents are placed to be scanned - Includes large flat bed scanner glass and small ADF scanner glass strip with mounting hardware |
| RM1-3225-000CN |
Grip - Front grip support assembly |
| RM1-3226-000CN |
Grip - Rear grip support assembly |
| RC2-1356-000CN |
Ground - Grounding plate - Located on the rear left side of the saddle assembly |
| 4G3-0725-000CN |
Guide - Motor guide assembly - Located on the saddle assembly - For motor (M3) |
| FC5-4221-000CN |
Guide - Tray roller guide - Mounts on the front side tray plate |
| FC5-5542-000CN |
Guide - Entrance sheet guide - Mounts on the cross member entrance guide |
| FM2-0756-000CN |
Guide - Saddle guide assembly - Mounts on the front saddle side plate - For the booklet maker |
| Q3938-67915 |
Guide - Rubber guide - For the scanner glass |
| RC1-8526-000CN |
Guide - Guide Multi-Purpose Up Guide Multi-Purpose Upper |
| RC1-8526-020CN |
Guide - Guide multi-purpose up guide multi-purpose upper |
| RC1-8959-000CN |
Guide - Guide, face-down inner |
| RC1-9185-000CN |
Guide - Intermediate transfer belt (ITB) front entrance guide |
| RC1-9186-000CN |
Guide - Intermediate transfer belt (ITB) rear entrance guide |
| RC1-9307-000CN |
Guide - Cable guide ´B´ |
| RC1-9308-000CN |
Guide - Cable guide ´C´ |
| RC1-9312-000CN |
Guide - Cable guide ´D´ |
| RC1-9318-000CN |
Guide - Cable guide ´E´ |
| RC1-9323-000CN |
Guide - Cable guide ´F´ |
| RC1-9332-000CN |
Guide - Fuser cable guide - Located on the fuser power supply assembly |
| RC1-9607-000CN |
Guide - Hold guide plate - Located on the left side of the lower guide assembly |
| RC1-9688-000CN |
Guide - Cable guide - Located next to the paper feed cogged belt on the intermediate feed main body |
| RC1-9881-000CN |
Guide - 1 x 500-sheet input tray paper feed roller guide |
| RC2-1284-000CN |
Guide - Side wall guide - Mounts on the upper height panel on the booklet maker unit |
| RL1-1283-000CN |
Guide - Multi-purpose/tray 1 right guide assembly |
| RL1-1335-000CN |
Guide - Guide, duplexing feed, upper |
| RM1-3291-000CN |
Guide - Multi-purpose/tray 1 guide assembly |
| RM1-3686-000CN |
Guide - Intermediate lowerr feed guide assembly |
| RM1-3687-000CN |
Guide - Intermediate feed upper guide assembly |
| RM1-4108-000CN |
Guide - Swing guide assembly - Includes swing roller assembly, swing jam clearing label, swing press assembly, swing roller shaft assembly, and the paper delivery gate arm |
| RM1-4110-000CN |
Guide - Lower entrance guide assembly - Located on the saddle paper feeder assembly |
| RM1-4131-000CN |
Guide - Upper delivery guide assembly - For the saddle assembly |
| RM1-4135-000CN |
Guide - Lower height guide assembly |
| RM1-4172-000CN |
Guide - Entrance upper guide assembly - For the stapler/stacker and booklet maker unit |
| RM1-4395-000CN |
Guide - Intermediate upper feed guide assembly |
| RM1-4398-000CN |
Guide - Front guide reader assembly |
| RM1-4399-000CN |
Guide - Rear guide reader assembly |
| RM1-4400-000CN |
Guide - Guide sensor assembly - For fuser open cover detection sensor (SR34) |
| RM1-4407-000CN |
Guide - Paper delivery guide assembly |
| RU5-6035-000CN |
Guide - Tray roller guide - Located on the output bin 1 |
| Q3938-67961 |
Hard Drive - Hard drive - High performance SATA 3.5 EIO serial ATA hard drive |
| Q3938-67928 |
Hardware - Power supply harness |
| RC1-9687-000CN |
Hardware - Blanking sheet - Mounts on the shield plate |
| RM1-3531-000CN |
Hardware - Auto-close assembly - Use for the 1x500-sheet and the 3x500-sheet |
| RM1-3531-060CN |
Hardware - Auto-close assembly - Use for the 1x500-sheet and the 3x500-sheetAuto-close assembly - Use for the 1x500-sheet and the 3x500-sheet Replaced: RM1-3531-000CN |
| RM1-3685-000CN |
Hardware - Fin lock assembly |
| RM1-4396-000CN |
Hardware - Left assist assembly |
| RM1-4397-000CN |
Hardware - Right assist assembly |
| Q3938-67952 |
Hinge - ADF hinge assembly - For the top cover on the scanner (document lid) for qty. 1 pc. |
| Q3938-67991 |
Hinge - ADF hinge assembly - For the top cover on the scanner (document lid)ADF hinge assembly - For the top cover on the scanner (document lid)for qty. 1 pc. |
| RC1-9043-000CN |
Hinge - Band, door for HP HP Color LaserJet CP6015 Printer |
| FB3-7973-000CN |
Holder - Roller holder 2 - For the cam shaft |
| FM2-0709-000CN |
Holder - Area sensor holder assembly |
| RC1-9260-000CN |
Holder - Holder, scanner thermistor |
| RC1-9277-000CN |
Holder - Cartridge fan holder - Holds fan (FM3) |
| RC1-9278-000CN |
Holder - Fuser fan holder - Holds fan (FM2) |
| RC1-9279-000CN |
Holder - Scanner fan holder - Holds fan (FM1) |
| RC1-9324-000CN |
Holder - Environment sensor holder - Holds the humidity sensor unit |
| RC1-9328-000CN |
Holder - High voltage connector holder - Located on the left side of the printer chassis - Attaches behind the main switch cover |
| RM1-3216-000CN |
Holder - Intermediate transfer belt (ITB) gear holder assembly |
| RM1-3230-000CN |
Holder - Transfer contact holder assembly |
| RM1-3252-000CN |
Holder - Main switch (SW11) holder assembly |
| RM1-3254-000CN |
Holder - Cartridge contact holder assembly |
| RM1-4402-000CN |
Holder - Tag PCA holder assembly |
| WT2-5738-000CN |
Holder - Cable holder - Secures cable at left front side near DC controller board - White plastic stand-off/holder |
| RM1-3589-000CN |
Interlock - Interlock switch assembly - Where the right door open detection sensor (SR11) mounts on |
| Q3938-67905 |
Inverter - Carriage assembly - Holds and positions print cartridges Optical scanner assembly - Includes carriage assembly and inverter assembly |
| Q3938-67972 |
Inverter - Carriage assembly - Holds and positions print cartridges Optical scanner assembly - Includes carriage assembly and inverter assembly |
| CB457A |
Kit - Hewlett Packard fuser assembly kit / fixing assembly kit |
| CB458A |
Kit - HP Color LaserJet 220volt Fuser Kit Prints approximately 100, 000 pages.CP6015/CM6030/CM6040 220V Fuser Kit. |
| Q3931-67908 |
Kit - Image Transfer Kit 150K Intermediate transfer belt (ITB) assemblyIntermediate transfer belt (ITB) assembly |
| FB3-7881-000CN |
Knob - Knob - Mounts on the lower internal cover on the left side of the saddle assembly |
| FC5-5024-000CN |
Knob - Latch knob - Mounts on the open/close guide on the saddle guide assembly |
| RM1-3450-000CN |
Laser Scanner - Laser Scanner Assembly, CLJ CP6015/CM6030/CM6040/CM6049 Series. |
| FC5-5021-000CN |
Latch - Right latch claw |
| RC2-1734-000CN |
LED - LED window - Mounts on the upper left side on the rear cover assembly of the stapler/stacker unit |
| RC1-8928-000CN |
Lever - Paper sensing lever - Senses paper in intermediate transfer belt (ITB) duct assembly |
| RC1-9220-000CN |
Lever - Lever, door interlock shutter |
| RC1-9883-000CN |
Lever - Lock lever - This is the rear cover lock for the 1 x 500-sheet paper input tray |
| RM1-3222-020CN |
Lifter - Lifter-drive-assembly |
| 4G3-0271-000CN |
Link - Slide link assembly - Located on the top door assembly (upper cover) |
| 4G3-0210-000CN |
Lock - Upper cover lock assembly |
| Q3931-67925 |
Lock - Security lock adapter kit |
| RM1-3215-000CN |
Lock - Intermediate transfer belt (ITB) rear lock support assembly |
| RM1-3228-000CN |
Lock - Intermediate transfer belt (ITB) front lock support assembly |
| CE487A |
Maintenance Kit - ADF Maintenance Roller Kit CE487A ADF Maintenance Kit Includes ADF Paper Pick-up Roller Assembly & Separation Pad Assembly. Estimated yield 75K pages. |
| Q3938-67944 |
Maintenance Kit - ADF maintenance kit - Includes the ADF paper pick-up roller assembly and the separation pad assembly |
| Q3938-67969 |
Maintenance Kit - ADF maintenance kit - Includes the ADF paper pick-up roller assembly and the separation pad assembly;Click to order the functional equivalent: Q3938-67999 |
| Q3931-67902 |
Memory - 128MB, 167MHZ, 200-pin DDR DIMM memory module |
| Q3931-67903 |
Memory - 256MB, 167MHZ, 200-pin DDR DIMM memory module |
| Q3931-67904 |
Memory - 512MB, 167MHZ, 200-pin DDR DIMM memory module |
| Q7559-60001 |
Memory - 512MB 200pin Printer memory for HP Color LaserJet 512MB, 167MHz, 200-pin DDR DIMM |
| Q7559A |
Memory - 512MB 200pin Printer memory for HP Color LaserJet 512MB, 167MHz, 200-pin DDR DIMM |
| Q7718-67951 |
Memory - 128MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7719-67951 |
Memory - 256MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7720-67951 |
Memory - 512MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| CC516-69002 |
Module - Intermediate paper transport unit (IPTU) (whole unit) |
| 4G3-0769-000CN |
Motor - Ejection stack motor (M32) assembly |
| 4K1-1103-000CN |
Motor - Stepping motor (M5) connector (J113) |
| FM2-0737-000CN |
Motor - Saddle motor assembly - Includes primary transfer roller disengagement motor(M9) and motor mount |
| FM2-1409-000CN |
Motor - Press motor (M36) assembly |
| Q3938-67908 |
Motor - Scanner motor - Drives the optical carriage assembly |
| RK2-1320-000CN |
Motor - Intermediate paper transfer unit (IPTU) media feed motor (M201) |
| RK2-1331-000CN |
Motor - Stepping motor - Main drive motor for the printer - Motor M1 |
| RK2-1366-000CN |
Motor - Toner feed motor (M17) - Drives the yellow, magenta, and cyan toner feed screws and waste toner feed screws - Mounts on the toner cartridge drive assembly |
| RK2-1370-000CN |
Motor - Toner feed motor (M16) - Drives the black toner feed screws and waste toner feed screws - Located on the toner cartridge drive assembly |
| RM1-3286-000CN |
Motor - Drum motor (M15) assembly - Drives the photosensitive drum and the primary charging roller in the black imaging drum |
| RM1-4519-000CN |
Motor - Fuser DC motor (M11) assembly - Drives the fuser roller, the delivery roller, and the fuser pressure roller |
| 4G3-0670-000CN |
Mount - Motor mount assembly |
| FM2-0720-000CN |
Mount - Flexible cable mount assembly |
| FM2-1639-000CN |
Mount - Delivery switch mount assembly |
| RM1-4128-000CN |
Mount - Lattice cable mount assembly |
| PF2288K050NI |
Mylar - Three ADF mylar replacement kit - Includes three clear mylar replacement strips for the ADF guide - Mounts in the ADF mylar holder assembly |
| Q3938-67901 |
Optical Unit - Carriage assembly - Holds and positions print cartridges Optical scanner assembly - Includes carriage assembly and inverter assembly |
| Q3938-67973 |
Optical Unit - Carriage assembly - Holds and positions print cartridges Optical scanner assembly - Includes carriage assembly and inverter assembly |
| Q3938-60107 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (English) |
| Q3938-60108 |
Overlay - Overlay for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| Q3938-60109 |
Overlay - Overlay for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| Q3938-60110 |
Overlay - Overlay for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| Q3938-60111 |
Overlay - Overlay for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| Q3938-60112 |
Overlay - Overlay for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| Q3938-60113 |
Overlay - Overlay for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| Q3938-60114 |
Overlay - Overlay for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| Q3938-60115 |
Overlay - Overlay for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| Q3938-60116 |
Overlay - Overlay for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| Q3938-60117 |
Overlay - Overlay for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| Q3938-60118 |
Overlay - Overlay for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| Q3938-60119 |
Overlay - Overlay for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| Q3938-60120 |
Overlay - Overlay for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| Q3938-60121 |
Overlay - Overlay for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| Q3938-60124 |
Overlay - Overlay for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| Q3938-60125 |
Overlay - Overlay for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| Q3938-60126 |
Overlay - Overlay for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| Q3938-60127 |
Overlay - Overlay for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| Q3938-60128 |
Overlay - Overlay for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| Q3938-60129 |
Overlay - Overlay for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| Q3938-60130 |
Overlay - Overlay for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| Q3938-60155 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Traditional Chinese/Taiwanese) |
| Q3938-60156 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Traditional Chinese) |
| Q3938-67949 |
Pad - ADF separation pad assembly - Helps separate paper in the ADF |
| Q3938-68000 |
Pad - ADF Separation Assembly |
| RC2-1283-000CN |
Panel - Upper height panel - Located on the stapler/stacker unit |
| CE664-69005 |
PC Board - Scanner controller-board (SCB) assembly - Provides timing and control for the flatbed scanner for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| CE664-69009 |
PC Board - Scanner controller-board (SCB) assembly - Provides timing and control for the flatbed scanner for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| CE878-60001 |
PC Board - Formatter (main logic) board - For HP Color LaserJet CM6040 series. |
| FG3-2887-000CN |
PC Board - Tray driver PCA assembly |
| Q3701-60004 |
PC Board - Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter boardHP LaserJet analog fax accessory 300 |
| Q3701-60020 |
PC Board - Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter boardHP LaserJet analog fax accessory 300 |
| Q3701-60021 |
PC Board - Modem PCA - HP LaserJet analog fax accessory 300 |
| Q3938-67902 |
PC Board - Scanner controller-board (SCB) assembly - Provides timing and control for the flatbed scanner for Color LaserJet CM6030 MFP, CM6049 Series, Color LaserJet CM6040 MFP |
| Q3938-67940 |
PC Board - Copy processor board (CPB) for Color LaserJet CM6040 CM6030 series copiers. |
| Q3938-67941 |
PC Board - SCUID board - Located on the havic assembly |
| Q3938-67960 |
PC Board - Formatter (main logic) board - For HP Color LaserJet CM6040 series |
| Q3938-67975 |
PC Board - Formatter Kit Formatter Board For HP LaserJet CM6040 / CM6040 |
| Q3938-67977 |
PC Board - Formatter (main logic) board - For HP Color LaserJet CM6040 series |
| Q3938-67982 |
PC Board - Formatter (main logic) board - For HP Color LaserJet CM6040 series |
| Q3938-67986 |
PC Board - DC controller PC board assembly - Mounts on the rear of the print engine frame on the right side of the formatter boardDC controller PC board assembly - Mounts on the rear of the print engine frame on the right side of the formatter board |
| Q3938-67997 |
PC Board - Kit-CE878A PCA replace 52,071,4 Rohs2.04 |
| Q6465-60001 |
PC Board - Copy processor board (CPB) for Color LaserJet CM6040 CM6030 series copiers. |
| Q6465-67940 |
PC Board - Copy processor board (CPB) for Color LaserJet CM6040 CM6030 series copiers. |
| Q7542-60003 |
PC Board - Formatter (main logic) board - For HP Color LaserJet CM6040 series. |
| Q7829-67903 |
PC Board - PCA motor assembly ADF |
| Q7829-67942 |
PC Board - PCA motor assembly ADF |
| Q7841-60001 |
PC Board - Hewlett Packard copier HP ADF MOTOR PCA board unit. |
| RM1-3559-000CN |
PC Board - Intermediate paper transfer unit (IPTU) driver PCA assembly |
| RM1-3569-000CN |
PC Board - 1 x 500-sheet input tray paper feed PCA assembly |
| RM1-3569-030CN |
PC Board - 500 sheet input tray PCA PAPER FEED PCB ASSY PAPER FEED PCB ASSY |
| RM1-3582-000CN |
PC Board - High voltage transfer PC board assembly |
| RM1-3585-000CN |
PC Board - Memory tag PCA assembly |
| RM1-4139-000CN |
PC Board - Main controller PCA assembly - For the stapler/stacker and booklet maker unit |
| RM1-4139-050CN |
PC Board - Main controller pcb assy |
| RM1-4140-000CN |
PC Board - Saddle controller PCA assembly |
| RM1-4141-000CN |
PC Board - LED PCA assembly - Located on the stapler/stacker unit rear cover |
| RM1-5475-000CN |
PC Board - High voltage transfer PC board assembly |
| RM1-6642-000CN |
PC Board - DC controller PC board assembly - Mounts on the rear of the print engine frame on the right side of the formatter board |
| RM1-6642-040CN |
PC Board - DC controller PC board assembly - Mounts on the rear of the print engine frame on the right side of the formatter board. |
| RM1-6642-050CN |
PC Board - DC controller PC board assembly - Mounts on the rear of the print engine frame on the right side of the formatter board |
| RM1-6642-080CN |
PC Board - DC controller PC board assembly - Mounts on the rear of the print engine frame on the right side of the formatter boardDC controller PC board assembly - Mounts on the rear of the print engine frame on the right side of the formatter board |
| RM1-6642-090CN |
PC Board - DC controller PC board assembly - Mounts on the rear of the print engine frame on the right side of the formatter board |
| WG8-5593-000CN |
PC Board - Sensor PC board - Small board with flag activated photosensor |
| RM1-3206-000CN |
Pickup Assembly - Paper cassette pick-up assembly - Includes one pick roller and tow feed rollers |
| RM1-3345-000CN |
Pickup Assembly - Multi-purpose/tray 1 paper pick-up assembly |
| RM1-3345-110CN |
Pickup Assembly - Mp. paper pick-up assy m.p. paper pick-up assy |
| RM1-3533-000CN |
Pickup Assembly - 1 x 500-sheet input tray paper pick-up assembly |
| RM1-3533-010CN |
Pickup Assembly - Paper Pick-Up Assy |
| Q3938-67903 |
Pin - Large pin assembly |
| Q3938-67904 |
Pin - Small pin assembly |
| XD3-2300-142CN |
Pin - Dowel pin - Located next to the 17-tooth gear on the output bin 2 |
| XD3-2300-202CN |
Pin - Dowel pin - Locate next to the 50-tooth gear |
| XD9-0240-000CN |
Pin - Pin, dowel for HP Color LaserJet CP6015 Printer |
| 4A3-1779-000CN |
Plate - Rotation plate - Located next to the dowel pin on the saddle assembly |
| 4A3-1955-000CN |
Plate - Grounding plate - Used only for booklet maker series |
| 4A3-4715-000CN |
Plate - Stop hinge plate - Used only for booklet maker series |
| 4G3-0671-000CN |
Plate - Inner side plate assembly - Used on the booklet market series only |
| FC5-6978-000CN |
Plate - Plate, option tray, front |
| RC1-9190-000CN |
Plate - Plate, fan fixing, front |
| RC1-9235-000CN |
Plate - Plate, drawer guard |
| RC1-9246-000CN |
Plate - Front sensor plate - For sensor (SR32) |
| RC1-9326-000CN |
Plate - HVT-A (high-voltage transmission) guard plate |
| RC1-9695-000CN |
Plate - Assist arm cap plate - Located on the upper guide assembly |
| RC1-9703-000CN |
Plate - Rear mount cover plate assembly |
| RC1-9901-000CN |
Plate - Switch cover plate - For the 1 x 500-sheet paper input tray door open detection switch (SW103) |
| RL1-1216-000CN |
Plate - Fuser motor (M11) plate |
| RM1-3235-000CN |
Plate - Yellow partition plate assembly |
| RM1-3237-000CN |
Plate - Magenta partition plate assembly |
| RM1-3238-000CN |
Plate - Cyan partition plate assembly |
| RM1-3354-000CN |
Plate - Rear mount cover plate assembly |
| RM1-3218-000CN |
Power Supply - Fuser power supply assembly |
| RM1-3594-000CN |
Power Supply - Low voltage power supply assembly |
| RM2-0190-000CN |
Power Supply - Low voltage power supply ass y |
| FM2-0730-000CN |
Pressure Assembly - Pressure roller assembly - For the stapler/stacker and booklet-maker |
| FS5-3577-000CN |
Pulley - 39-tooth pulley - Runs on the woodruff roller - Located next to the roller flag |
| FU5-3086-000CN |
Pulley - 20-tooth pulley |
| Q3938-67909 |
Pulley - Scanner pulley assembly - For transmission timing belt |
| RC1-9620-000CN |
Pulley - Flange pulley - Attaches to the paper feed cogged belt located on the intermediate feed main body assembly |
| FB3-7934-000CN |
Rack Slide - Rear rack slide - Mounts on the rear saddle side plate |
| FB3-7967-000CN |
Rack Slide - Front rack slide - Mounts on the front saddle side plate |
| FC5-5436-000CN |
Rail - Rail rack - Mounts on the finisher main body - Four used |
| RC1-8931-000CN |
Rail - Rail - fixing - front, front fuser rail. |
| RC1-8939-000CN |
Rail - Rail, fixing, rear |
| RC1-9206-000CN |
Rail - Rear reverse scanner rail |
| RC1-9231-000CN |
Rail - Roller rail - Attaches to the left cassette rail |
| RL1-1213-000CN |
Rail - Left top rail - For the 1 x 500-sheet paper input tray |
| RL1-1215-000CN |
Rail - Right cassette rail - For the 1 x 500-sheet paper input tray |
| RL1-1310-000CN |
Rail - Right cassette rail - For the 1 x 500-sheet paper input tray |
| RL1-1311-000CN |
Rail - Paper cassette tray left rail |
| Q3939A-Repair_LaserJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| RC1-8511-000CN |
Retainer - Retainer (C Type) for Color LaserJet CP6015n. |
| RM1-3652-000CN |
Reversing Unit - Reversing assembly for duplexer assembly |
| XD2-3100-152CN |
Ring - C-type external retainer ring |
| Q3938-67911 |
Rod - Scanner rod - Shaft that the scanner carriage assembly rides on |
| 4A3-1783-000CN |
Roller - Roller, folding |
| CB459A |
Roller - 2nd transfer roller assembly - For the LaserJet CP6015 and CM6030/6040 series |
| FM2-0725-090CN |
Roller - Return-roller assembly - For the stapler/stacker and booklet-maker |
| Q3931-67919 |
Roller - Paper pick-up roller and retard roller kit - Includes one pick-up roller, one retard roller, and two paper feed rollers - Use with tray 2,3,4, and 5 |
| Q3931-67920 |
Roller - Paper pick-up retard roller - Used for tray 1 |
| Q3931-67938 |
Roller - Paper pick-up roller assembly - Includes four paper pick-up rollers, and eight paper feed rollers - Use with tray 2,3,4, and 5 |
| Q3938-67959 |
Roller - Paper pick-up roller - Includes one pick-up roller, and two paper feed rollers - Use with tray 2,3,4, and 5 |
| Q3938-67968 |
Roller - Roller Kit (150K life) Roller Kit (150K life) |
| Q7829-67924 |
Roller - Pickup roller high capacity input (HCI) - Attached to the pickup arm - Presses down the paper stack surface to feed the paper one sheet at a time (white) |
| Q7829-67940 |
Roller - Paper feed roller assembly - Includes four feed serparation rollers |
| RC1-8567-000CN |
Roller - Multi-purpose paper pick-up roller |
| RL1-1206-000CN |
Roller - Pickup roller high capacity input (HCI) - Attached to the pickup arm - Presses down the paper stack surface to feed the paper one sheet at a time (white) |
| RL1-1289-000CN |
Roller - Paper pick-up roller - For the 1 x 500-sheet and 3 x 500-sheet paper input tray |
| RM1-0036-020CN |
Roller - Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24-tooth white gear on one side |
| RM1-0037-020CN |
Roller - Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder |
| RM1-3319-000CN |
Roller - Roller Kit (150K life) Roller Kit (150K life) |
| RM1-4392-000CN |
Roller - Retard roller - Mounts on the multi-purpose roller assembly next to the limiter torque |
| RM1-4178-000CN |
Saddle - Saddle stapler assembly |
| CE664-69004 |
Scanner - Flatbed Scanner assembly - Includes (SCB) System Control Board - Does not include power supply, boards, and cable |
| CE664-69008 |
Scanner - Flatbed Scanner assembly - Includes (SCB) System Control Board - Does not include power supply, boards, and cable |
| Q3931-67907 |
Scanner - Laser/scanner assembly kit, CLJ CP6015/CM6030/CM6040/CM6049 Series. |
| Q3931-67942 |
Scanner - Laser Scanner Assembly, CLJ CP6015/CM6030/CM6040/CM6049 Series. |
| Q3938-60132 |
Scanner - Entire scanner - Entire scanner - ASSEMBLY-SCANNER SERVICE ASSEMBLY-SCANNER for Hewlett Packard Color LaserJet Copiers. (for scanner only CE664-69004). |
| Q3938-60161 |
Scanner - Entire scanner - Entire scanner - ASSEMBLY-SCANNER SERVICE ASSEMBLY-SCANNER for Hewlett Packard Color LaserJet Copiers. |
| 0515-4679 |
Screw - M3 pan-head phillips screw with washer - 6mm long |
| 3030-1103 |
Screw - Screw socket head cap (black) 6,32mm 0.25 inch long |
| FU5-9059-000CN |
Screw - M3 X 6mm machine thread screw with attached washer - Used to secure metal to metal |
| RS5-9099-000CN |
Screw - Stepped screw - Larger shoulder screw used to fasten the left side cover to the frame of the 2,000-sheet paper feeder assembly (two used) |
| XA9-0912-000CN |
Screw - Machine screw with captured washer - M5 X 12 - Typically used to secure plastic parts to metal |
| XA9-1159-000CN |
Screw - M3 X 10mm machine screw with attached washer - Used to hold plastic to metal |
| XA9-1386-000CN |
Screw - M3 X 8mm long self threading screw with captured washer |
| XA9-1422-000CN |
Screw - M4 X 12mm machine screw with washer |
| XA9-1448-000CN |
Screw - Screw - M4 X 8mm long |
| XA9-1449-000CN |
Screw - M3 pan-head Phillips screw with machine threads - 8mm long |
| XA9-1469-000CN |
Screw - Machine screw with attached washer - M3, 10mm - Used to hold plastic to metal |
| XA9-1495-000CN |
Screw - 4 Wafer head machine screw included - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal |
| XA9-1500-000CN |
Screw - M3 pan-head Phillips screw with flat washer - 8mm long |
| XA9-1504-000CN |
Screw - M3 truss head (flanged) screw - 8mm long |
| XA9-1801-000CN |
Screw - M13x12 RS screw - Used to secure metal to metal |
| XB1-2300-407CN |
Screw - M3x4 machined truss-head screw |
| XB2-8300-607CN |
Screw - M3x6 screw with washer |
| XB4-7300-605CN |
Screw - Screw - 6 mm Phillips head screw with attached washer |
| XB4-7401-005CN |
Screw - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates |
| XB4-7401-006CN |
Screw - M4x10 tapping pan-head screw |
| XB6-7303-005CN |
Screw - Machine screw - M3, 30mm long with self-tapping threads - Typically used to hold metal to plastic |
| 4G1-1498-000CN |
Sensor - Area sensor PCA assembly - Located on the area sensor holder assembly |
| 4G3-0934-000CN |
Sensor - Paper face sensor assembly |
| 4G3-1624-000CN |
Sensor - Paper face sensing assembly - Located on the upper height panel |
| FC5-5004-000CN |
Sensor - Paper sensing sensor flag - Mounts on the lower height panel |
| FM2-0707-000CN |
Sensor - Paper sensor assembly - Includes the paper sensor arm, photo interrupter (PI42), and paper sensor plate |
| FM2-0763-000CN |
Sensor - Rear end sensor assembly |
| FM2-1401-000CN |
Sensor - Shutter sensor assembly |
| FM2-1417-000CN |
Sensor - Sensor/switch assembly - Includes leaf spring, micro switch (MSW31), photo interrupter (PI32), and wire saddle |
| FM2-1708-000CN |
Sensor - Option sensor assembly - Includes the photo interrupter (TLP1424) and bracket |
| Q3938-67907 |
Sensor - Scanner lid sensor assembly |
| Q7829-67914 |
Sensor - ADF photo interrupter sensor with connector |
| RK2-2376-000CN |
Sensor - Sensor unit, humidity |
| RM1-3250-000CN |
Sensor - Photo sensor (SR26) assembly - Fuser home position sensor |
| RM1-3258-000CN |
Sensor - Color plane registration sensor assembly |
| RM1-3570-000CN |
Sensor - Option paper sensor PCA assembly |
| RM1-4107-000CN |
Sensor - Area sensor flag assembly - Includes flag area sensor plate - Located on the finisher main body |
| WG8-5696-000CN |
Sensor - Photo-interrupter sensor assembly (Does not include the sensor flag) |
| Q3939A-Manual_Color |
Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. |
| CC516A |
Service Parts - HP CLJ CM6040 Booklet Maker |
| FM2-1423-000CN |
Shaft - Swing press shaft assembly |
| RC1-9912-000CN |
Shaft - Lock shaft - For the 1 x 500-sheet paper input tray |
| 5851-2972 |
Snap - Left hard disk rail snap;Click to order the functional equivalent: CC519-67904 |
| 5851-2973 |
Snap - Rail, right snap HP Hard Drive Caddy Rail |
| FH6-5100-000CN |
Solenoid - Solenoid |
| FL2-0821-000CN |
Solenoid - Solenoid (SL34) - Buffer rear end holding solenoid drive signal |
| Q7829-67915 |
Solenoid - ADF solenoid |
| 4S3-2116-000CN |
Spring - Tension spring - Provides tension to the front pressure plate (small spring) |
| 4S3-2117-000CN |
Spring - Tension spring - Provides tension to the front pressure plate (big spring) |
| FB3-7980-000CN |
Spring - Torsion spring - Provides torsion to flag sensor located on the rear saddle side plate |
| FC5-5005-000CN |
Spring - Torsion spring - Provides torsion to the paper sensing sensor flag located on the lower height panel |
| FC5-6857-000CN |
Spring - Torsion spring for HP Q3938A |
| FS6-2582-000CN |
Spring - Tension spring - Provides tension to the pressure plate assembly |
| RC1-9233-000CN |
Spring - Spring, leaf for HP HP Color LaserJet CP6015 Printer |
| RC1-9244-000CN |
Spring - Torsion spring - Provides torsion to the front fuser fan plate |
| RU5-2796-000CN |
Spring - Tension spring - Provides tension to the paper sensing lever |
| RU5-2822-000CN |
Spring - Tension spring - Provides tension to the scanner assembly |
| RU5-2825-000CN |
Spring - Torsion spring - Located on the back of the scanner assembly |
| CC517A |
Stacker Assembly - HP CLJ CM6040 Stapler/Stacker |
| FL2-0846-000CN |
Stacker Assembly - Stapler unit - Located on the saddle stapler assembly |
| FM2-0721-000CN |
Stacker Assembly - Staple assembly - For stapler/stacker and booklet-maker unit |
| FM2-0722-000CN |
Stapler - Stapler sub-assembly - Includes upper and lower clinch guide, staple unit and motor (M14), bin sensor flag, photo interrupter (PI46), and staple mount |
| 4A3-1782-000CN |
Stop - Lever stopper for HP Color LaserJet CM6030 MFP |
| RC1-9882-000CN |
Stop - Stopper, right door |
| RC1-9900-000CN |
Support - Lock shaft support - Located on the 1 x 500-sheet paper input tray |
| FM2-0710-000CN |
Switch - Approach switch assembly - Includes approach switch plate and microswitch (MS33) |
| RC1-9300-000CN |
Switch - Button, main switch |
| WC2-5512-000CN |
Switch - Door open detection switch (SW103) |
| RK2-1363-000CN |
Thermistor - Thermistor unit - Monitors the temperature inside the scanners |
| FC5-3657-000CN |
Torque Limiter - Torque limiter - Torque limiter for the swing press shaft |
| RC1-8519-000CN |
Torque Limiter - Torque limiter - Located next to paper pick-up retard roller in multi-purpose/tray 1 assembly |
| CB463A |
Transfer Assembly - HP Color LaserJet Transfer Kit. CP6015/CM6030/CM6040 TRNFR Kit prints approximately 150, 000 pages |
| Q3931-67909 |
Transfer Assembly - Secondary transfer assembly - Located at bottom of the intermediate transfer belt (ITB) assembly;Click to order the functional equivalent: Q3931-67946 |
| Q3931-67918 |
Tray - 500-sheet paper input tray cassette - For use with tray 2 |
| Q3931-67923 |
Tray - 500-sheet paper input tray cassette - For use with Tray 3, 4, or 5 |
| Q3938-67950 |
Tray - ADF input paper tray assembly - Holds 50-sheets |
| Q3938-67956 |
Tray - 500-sheet paper input tray - For use with tray 3, 4, or 5 |
| Q3938-67964 |
Tray - Duplex switchback tray |
| RC1-9256-000CN |
Tray - Screw tray - Attaches next ot the cable guide E |
| RM1-3340-000CN |
Tray - Face down end tray assembly |
| RM1-3529-000CN |
Tray - 500-sheet paper input tray - For use with tray 3, 4, or 5 |
| RM1-4101-000CN |
Tray - Stapler/stacker tray - Upper tray assembly for the stapler/stacker (output bin 1) |
| RM1-4102-000CN |
Tray - Upper stack tray assembly (output bin 1) - For the booklet maker unit |
| RM1-4105-000CN |
Tray - Lower stack tray assembly (output bin 2) - For the stapler/stacker and booklet maker series |
| RM1-5949-000CN |
Tray - Lower duplexing tray assembly - Attaches to the paper delivery cover |
| RM2-5071-010CN |
Tray - Cassette Assembly |
| Q3931-67946 |
Tray Assembly - HP Secondary Transfer Assembly - Located at Bottom of the Intermediate ITB Assembly |
| Q6998-67902 |
Tray Assembly - Top output bin tray - Stack sub-tray assembly for the stapler/stacker unit |
| RM1-3341-000CN |
Tray Assembly - Multi-purpose/tray 1 drop down door paper input tray assembly |
| RM1-4101-020CN |
Tray Assembly - Stapler/stacker tray - Upper tray assembly for the stapler/stacker (output bin 1) |
| RM1-4104-000CN |
Tray Assembly - Stack tray assembly - Includes front and rear extension tray guide, stack tray, and extension tray |
| RM1-4113-000CN |
Tray Assembly - Booklet-output bin (saddle tray assembly) - Includes sensor cable and photo interrupter (TLP1242) |
| RM1-4125-000CN |
Tray Assembly - Operation-tray assembly - Includes operational tray cable and photo interrupter (TLP1242) |
View service parts