| RC1-0003-000CN |
Arm - Toner cartridge arm - Mechanical link between main drive assembly and toner cartridge release mechanism |
| RM1-0025-040CN |
Belt - Paper feed belt assembly |
| RC1-0206-000CN |
Bushing - Bushing - On right side of paper pickup drive assembly |
| RC1-0264-000CN |
Bushing - Feed roller shaft bushing - Bushing on right side of printer that supports the feed roller shaft. |
| RU5-1408-000CN |
Bushing - Bushing - Feed roller shaft bushing - Bushing on right side of printer that supports the feed roller shaft |
| 5063-1256 |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| C2950A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| C2951A |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| RG1-4205-000CN |
Cable - Fuser cable - Main fuser cable for LaserJet 4200 series |
| RG1-4213-000CN |
Cable - Top Cover cable - From top cover microswitch (SW101) to DC Controller board |
| RG1-4214-000CN |
Cable - Top bin full sensor cable |
| RG1-4215-000CN |
Cable - Control panel cable |
| RG1-4219-000CN |
Cable - Memory cable - From DC Controller board to the toner cartridge wireless memory contact tag |
| RG1-4221-000CN |
Cable - Tray 2 paper pickup sensor cable assembly - Connects to sensors PS101 and PS107 |
| RG1-4223-000CN |
Cable - Power cable for Tray 3 paper feeder - Black connector with 42mm six wire cable to white connector |
| RG1-4224-000CN |
Cable - Envelope feeder cable - From DC Controller board to envelope feeder connector - Includes envelope feeder connector |
| RG1-4250-000CN |
Cable - Sensor cable assembly - For 500 sheet feeder assembly |
| RG1-4250-020CN |
Cable - Sensor cable assembly - For 500 sheet feeder assembly |
| RG5-6815-000CN |
Cable - AC cable - Low voltage power supply (LVPS) to fuser power supply cable |
| RG5-6826-000CN |
Cable - DC Controller to fuser safety circuit, high voltage power supply (HVPS), electrostatic transfer belt (ETB) |
| RG5-6826-040CN |
Cable - DC Controller to fuser safety circuit, high voltage power supply (HVPS), electrostatic transfer belt (ETB) |
| RM1-1189-000CN |
Cable - Top bin full sensor cable |
| RM1-1190-000CN |
Cable - Control panel cable |
| RM1-1191-000CN |
Cable - Memory cable - From DC Controller board to the toner cartridge wireless memory contact tag |
| RM1-1192-000CN |
Cable - Power cable for Tray 3 paper feeder - Black connector with 42mm six wire cable to white connector |
| RM1-1193-000CN |
Cable - Envelope feeder cable - From DC Controller board to envelope feeder connector - Includes envelope feeder connector |
| Q1338-67901 |
Cartridge - Black Toner Cartridge - With 'Micro-Fine' toner - Prints approximately 12,000 pages |
| Q1338-67901 |
Cartridge - Black Toner Cartridge - With 'Micro-Fine' toner - Prints approximately 12,000 pages |
| Q1338A |
Cartridge - Black Toner Cartridge - With 'Micro-Fine' toner - Prints approximately 12,000 pages |
| RM1-1089-000CN |
Cassette - Cassette Rear Assy |
| RM1-1089-030CN |
Cassette - Cassette Rear Assy |
| 5090-3379 |
Cleaner - Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills |
| XD9-0137-000CN |
Clip - E-Type retainer ring |
| XD9-0234-000CN |
Clip - E-Type retainer ring |
| RH7-5358-000CN |
Clutch - Paper feed assembly clutch (CL101) - Electro mechanical clutch that connects to the white 30-tooth gear |
| RK2-0349-000CN |
Clutch - Paper feed assembly clutch (CL101) - Electro mechanical clutch that connects to the white 30-tooth gear |
| RG1-4201-000CN |
Connector - Cable and connector on top right rear of 500 sheet feeder assembly |
| RG1-4202-000CN |
Connector - Cable and connector on bottom right rear of 500 sheet feeder assembly |
| RM1-0042-000CN |
Connector - Accessory cable/connector - Connector for stacker and stacker/stapler accessory at top right rear of printer |
| RM1-1236-000CN |
Connector - Cable and connector on top right rear of 500 sheet feeder assembly |
| RM1-1237-000CN |
Connector - Cable and connector on bottom right rear of 500 sheet feeder assembly |
| RG1-4276-020CN |
Control Panel - Control panel assembly |
| RM1-1195-000CN |
Control Panel - Control panel assembly |
| RC1-0019-000CN |
Cover - Inner right front cover |
| RC1-0287-030CN |
Cover - Left side cover panel |
| RC1-0288-000CN |
Cover - Formatter board cover |
| RC1-0289-000CN |
Cover - Top rear cover of printer - Removes for Stapler/Stacker installation |
| RC1-0290-000CN |
Cover - Lower rear cover - Covers rear of standard 500 sheet tray |
| RC1-0291-000CN |
Cover - Duplexer slot cover - Removable lower rear cover for Duplexer attachment slot |
| RC1-0320-000CN |
Cover - Envelope cover - Plastic piece above Tray 1 pickup roller |
| RC1-0344-000CN |
Cover - Fan connector cover - Small metal piece under fan that protects the fan connector |
| RC1-0487-020CN |
Cover - Left side cover for 500 sheet paper feeder assembly |
| RC1-0488-020CN |
Cover - Right side cover for 500 sheet paper feeder assembly |
| RC1-0500-020CN |
Cover - Cover plate - Plastic cover on right front corner of 500 sheet feeder tray - Covers removable tray number designator plate. Part approaching End of Life, please contact HP for availability |
| RM1-0027-000CN |
Cover - Rear output tray assembly - Includes upper rear paper output tray and cover |
| RM1-0027-020CN |
Cover - Rear output tray assembly - Includes upper rear paper output tray and cover |
| RM1-0046-020CN |
Cover - Right side cover assembly |
| RM1-0047-000CN |
Cover - Cartridge access door cover for LaserJet 4200 family |
| RM1-0047-020CN |
Cover - Cartridge access door cover for LaserJet 4200 family |
| RM1-0047-030CN |
Cover - Cartridge access door cover for LaserJet 4200 family |
| RM1-0049-000CN |
Cover - Top cover assembly - Top paper output tray and top of printer |
| RM1-0049-020CN |
Cover - Top cover assembly - Top paper output tray and top of printer |
| RM1-0049-030CN |
Cover - Top cover assembly - Top paper output tray and top of printer |
| RM1-0050-000CN |
Cover - Front cover - Drop down Tray 1 |
| RM1-0050-050CN |
Cover - Front cover - Drop down Tray 1 |
| RM1-0026-000CN |
Delivery - Paper delivery assembly - Paper output roller assembly |
| RM1-0026-020CN |
Delivery - Paper delivery assembly - Paper output roller assembly |
| RG1-4276-030CN |
Drive Assembly - Control panel assembly |
| RM1-0001-040CN |
Drive Assembly - Main drive assembly - Main gear assembly on right side of printer |
| RM1-0056-040CN |
Drive Assembly - Paper pickup drive assembly - Gear assembly on right front side of 500 sheet paper feeder assembly |
| RM1-0056-070CN |
Drive Assembly - Paper pickup drive assembly - Gear assembly on right front side of 500 sheet paper feeder assembly |
| Q2439A |
Duplexer - Duplexer assembly for LaserJet 4200/4300 |
| Q2439B |
Duplexer - Automatic duplexer assembly - For LaserJet 4200/4250 and 4300/4350 series printers |
| RH7-1573-000CN |
Fan - Cooling fan on left side of printer |
| RH7-1577-000CN |
Fan - Cooling fan on right side of printer |
| RK2-0278-000CN |
Fan - Cooling fan - Located on left side of printer (FN101) |
| RK2-0280-000CN |
Fan - Cooling fan (FN105) - Located on right side of printer - Provides air to the print cartridge area |
| 5851-4076 |
Feeder - Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly |
| Q2444A |
Feeder - 1500 sheet paper tray and feeder assembly for LaserJet products series printers. |
| RC1-0060-050CN |
Feeder - Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly |
| RC1-0061-000CN |
Feeder - Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly |
| RM1-0012-000CN |
Feeder - Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly |
| RM1-0012-020CN |
Feeder - Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly |
| 92296T |
Film - Film (Transparency) for LaserJet II, LaserJet III, LaserJet 4 Series, LaserJet 4L Series |
| Q2453-60001 |
Firmware - LaserJet 4200 Firmware DIMM - Version |
| Q2453DG |
Firmware - Fw dimm 4200l for HP Q3993A |
| Q2425-69009 |
Fixing Assembly - Fuser assembly for LJ 4200 series - 110 volt Bonds toner to paper with heat - For 100 to 127VAC operation |
| RC1-0060-030CN |
Flag - Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly |
| RC1-0161-000CN |
Flag - Paper size sensing flag - White plastic arm used as mechanical link to tray size sensor PC Board - Three used per sensing assembly |
| RC1-0209-000CN |
Flag - Paper sensor flag for Tray 2 paper pickup assembly |
| RC1-0209-020CN |
Flag - Paper sensor flag for Tray 2 paper pickup assembly |
| Q2425-69013 |
Fuser Assembly - Fuser assembly for LaserJet 4200 series - 110 volt Fuser assembly for LJ 4200 series - 110 volt Bonds toner to paper with heat - For 100 to 127VAC operation |
| Q2425-69014 |
Fuser Assembly - Fuser assembly for LaserJet 4200 series - 220 volt |
| Q2425-69017 |
Fuser Assembly - Fuser assembly for LaserJet 4200 series - 110 volt Fuser assembly for LJ 4200 series - 110 volt Bonds toner to paper with heat - For 100 to 127VAC operation |
| Q2425-69018 |
Fuser Assembly - Fuser assembly for LaserJet 4200 series - 220 volt |
| RM1-0013-000CN |
Fuser Assembly - Fuser assembly for LaserJet 4200 series - For 110 VAC operation |
| RM1-0013-040CN |
Fuser Assembly - Fuser assembly for LaserJet 4200 series - 110 volt Fuser assembly for LJ 4200 series - 110 volt Bonds toner to paper with heat - For 100 to 127VAC operation |
| RM1-0013-140CN |
Fuser Assembly - Fuser assembly - For LaserJet 4200 series - 110 VAC |
| RM1-0013-230CN |
Fuser Assembly - Fuser assembly - For LaserJet 4200 series - 110 VAC Fuser assembly for LJ 4200 series - 110 volt Bonds toner to paper with heat - For 100 to 127VAC operation |
| RM1-0014-140CN |
Fuser Assembly - Fuser assembly for LaserJet 4200 series - 220 volt |
| RM1-0014-230CN |
Fuser Assembly - Fuser assembly for LaserJet 4200 series - 220 volt |
| RC1-3324-000CN |
Gear - Fuser gear unit 40t driven by swing plate assembly unit. Gear attaches to fuser unit and driven by swing plate. |
| RU5-0045-020CN |
Gear - 18 tooth gear - Located on right side of printer in the Tray 2 paper pickup assembly |
| RU5-0045-030CN |
Gear - 18-tooth gear - Located on right side of printer in the tray 2 paper pickup assembly Part. |
| RU5-0050-000CN |
Gear - 30 tooth gear - Black plastic gear that attaches to paper feed assembly clutch |
| RU5-0088-000CN |
Gear - 18 tooth gear - Located on right side of printer in the 500 sheet tray paper pickup assembly |
| RM1-0002-030CN |
Gear Assembly - Duplexing pendulum assembly - Gear assembly that transfers power from main motor to run duplexing capability |
| RC1-0153-030CN |
Guide - Right side Tray 2 paper cassette guide |
| RC1-0244-000CN |
Guide - Support guide - Supports right rear side of power supply board |
| RC1-0269-020CN |
Guide - DC Controller flat cable guide |
| RC1-0270-020CN |
Guide - DC Controller board cable guide |
| RC1-0273-000CN |
Guide - Paper feed belt guide for left side |
| RC1-0274-020CN |
Guide - Paper feed belt guide for right side |
| RC1-0340-000CN |
Guide - Guide for scanner cable 1 |
| RC1-0340-020CN |
Guide - Guide for scanner cable 1 |
| RC1-0385-000CN |
Guide - Guide for scanner cable 2 |
| RC1-0386-000CN |
Guide - Connecting cable guide - Routes and protects all cables running from top portion of printer to the DC controller board |
| J6054B |
Hard Drive - 10GB minimum, 20GB maximum EIO hard disk - Can be installed in printers with EIO slots - Provides mass storate capability for downloading fonts and macros - May also hold print jobs. |
| RC1-0208-030CN |
Holder - Paper sensor flag holder |
| RC1-0211-000CN |
Holder - Paper pickup arm - Pickup and feed roller holder for Tray 2 paper pickup assembly |
| RC1-0212-000CN |
Holder - Paper pickup arm holder - Holder for pickup roller shaft |
| RC1-0342-020CN |
Holder - Thermistor holder - Plastic inside half of thermistor holder |
| RC1-0343-020CN |
Holder - Thermistor holder - Metal outside half of thermistor holder |
| Q2429A |
Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q6551A |
Label - High quality self-adhesive labels - A4 size (21.0cm x 29.7cm) sheets, 148mm x 105mm labels, four labels per sheet - Box of 25 sheets |
| Q6552A |
Label - High quality self-adhesive labels - A4 size (21.0cm x 29.7cm) sheets, 148mm x 105mm labels, four labels per sheet - Box of 100 sheets |
| Q6553A |
Label - High quality self-adhesive labels - A4 size (21.0cm x 29.7cm) sheets, 105mm x 74mm labels - Box of 100 sheets |
| Q6554A |
Label - High quality self-adhesive labels - A4 size (21.0cm x 29.7cm) sheets, 97mm x 42.3mm labels, 12 labels per sheet - Box of 25 sheets |
| Q6555A |
Label - High quality self-adhesive labels - A4 size (21.0cm x 29.7cm) sheets, 97mm x 42.3mm labels, 12 labels per sheet - Box of 100 sheets |
| Q6556A |
Label - High quality self-adhesive labels - A4 size (21.0cm x 29.7cm) sheets, 105mm x 37mm labels, 16 labels per sheet - Box of 100 sheets |
| Q6557A |
Label - High quality self-adhesive labels - A4 size (21.0cm x 29.7cm) sheets, 70mm x 42.3mm labels, 21 labels per sheet - Box of 100 sheets |
| Q6558A |
Label - High quality self-adhesive labels - A4 size (21.0cm x 29.7cm) sheets, 70mm x 36mm labels, 24 labels per sheet - Box of 25 sheets |
| Q6559A |
Label - High quality self-adhesive labels - A4 size (21.0cm x 29.7cm) sheets, 70mm x 36mm labels, 24 labels per sheet - Box of 100 sheets |
| Q6560A |
Label - High quality self-adhesive labels - A4 size (21.0cm x 29.7cm) sheets, 38mm x 21.2mm labels, 65 labels per sheet - Box of 25 sheets |
| RM1-0045-000CN |
Laser Scanner - Laser/scanner assembly |
| RM1-0173-000CN |
Laser Scanner - Laser/scanner assembly |
| RF5-3898-000CN |
Lever - Laser scanner shutter lever - (one pc) Four used on this printer. One for each scanner assembly. |
| RM1-0033-020CN |
Lifter - Tray 2 lifter drive assembly - Provides lift support for paper tray |
| RM1-0033-040CN |
Lifter - Tray 2 lifter drive assembly - Provides lift support for paper tray |
| RM1-0208-000CN |
Lifter - Tray lifter drive assembly - Lifts paper tray as paper is used in 500 sheet tray |
| Q2429-67902 |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes Fuser Assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray |
| Q2429-67904 |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes Fuser Assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429-67905 |
Maintenance Kit - LaserJet 4200 maintenance kit - For 120 VAC operation - Includes fusing assembly, separation roller, transfer roller, feed roller for tray 1, two feed rollers for the 500-sheet tray, one feed roller for 1500-sheet tray and installation instructions |
| Q2429-67905 |
Maintenance Kit - LaserJet 4200 maintenance kit - For 120 VAC operation - Includes fusing assembly, separation roller, transfer roller, feed roller for tray 1, two feed rollers for the 500-sheet tray, one feed roller for 1500-sheet tray and installation instructions |
| Q2429-69001 |
Maintenance Kit - LaserJet 4200 maintenance kit - For 120 VAC operation - Includes fusing assembly, separation roller, transfer roller, feed roller for tray 1, two feed rollers for the 500-sheet tray, one feed roller for 1500-sheet tray |
| Q2429-69004 |
Maintenance Kit - LaserJet 4200 maintenance kit - For 120 VAC operation - Includes fusing assembly, separation roller, transfer roller, feed roller for tray 1, two feed rollers for the 500-sheet tray, one feed roller for 1500-sheet tray |
| Q2429-69005 |
Maintenance Kit - LaserJet 4200 maintenance kit - For 120 VAC operation - Includes fusing assembly, separation roller, transfer roller, feed roller for tray 1, two feed rollers for the 500-sheet tray, one feed roller for 1500-sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430-67905 |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes Fuser Assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430-69005 |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2437-67905 |
Maintenance Kit - LJ 4300 maintenance kit - (220V) - Includes Fuser Assembly, separation roller, tr |
| Q2431-90916 |
Manual - LaserJet 4200/4300 combined product family service manual |
| C4286A |
Memory - 2MB flash DIMM memory - Font storage device |
| C4287A |
Memory - 4MB flash DIMM memory - Font storage device |
| C7842AX |
Memory - 8MB, 100MHz SDRAM DIMM memory module |
| C7843A |
Memory - 16MB, 100-pin SDRAM DIMM memory module |
| Q2453-67906 |
Memory - LJ 4200 Firmware DIMM |
| Q2453-67925 |
Memory - Lj4200 dimm (base model only) |
| Q2453-67934 |
Memory - LaserJet 4200L series Firmware DIMM |
| Q7709A |
Memory - 133 MHz 128MB, 100-pin SDRAM DIMM memory module Synchronous DRAM DIMM |
| Q9121A |
Memory - 128MB, 100-pin SDRAM DIMM memory module Synchronous DRAM DIMM |
| RH7-1570-000CN |
Motor - Main motor - Motor on front right side of printer - M101 |
| RH7-1576-000CN |
Motor - Toner cartridge motor - Motor M102 |
| Q3993-40001 |
NamePlate - LaserJet 4200L series name plate kit - Includes label for LaserJet 4200L series |
| Q2431-40004 |
Overlay - Control Panel Overlay - English |
| Q2431-40009 |
Overlay - Control Panel Overlay (Spanish) |
| RL1-0007-000CN |
Pad - Tray 1 paper separation pad |
| HPJ1124 |
Paper - HP LaserJet Paper - A size (8.5 x 11-inches) - 500 sheets |
| HPJ113H |
Paper - Paper for DeskJet 5440 Series, LaserJet 2100 Series, LaserJet 4P Series, DeskJet 300 |
| HPJ1424 |
Paper - HP LaserJet Paper - 21.6cm (8.5in) x 35.5cm (14in) - 500 sheets |
| HPM1120 |
Paper - HP Multipurpose Paper - A size (8.5 x 11-inches) - 500 sheets |
| HPMR311 |
Paper - Media for HP Q3950A |
| HPP1122 |
Paper - HP Printing Paper - A size (8.5 x 11-inches) - 500 sheets |
| HPU1132 |
Paper - HP Premium Choice LaserJet Paper - A size (8.5 x 11-inches) - 500 sheets |
| Q6541A |
Paper - HP Color Laser Soft-gloss Presentation Paper - A size (8.5 x 11-inches) - 200 sheets |
| Q6542A |
Paper - Paper (Glossy) for LaserJet 5200 series, LaserJet 1320t Printer, Color LaserJet 2605 Printer, Color LaserJet 2700 Printer |
| Q6543A |
Paper - Paper (Matte) for Color LaserJet 4700, LaserJet 1320t Printer, LaserJet P3xxx Printer, Color LaserJet 2605 Printer |
| Q6544A |
Paper - Paper (Matte) for LaserJet 4P Series, LaserJet 2100 Series, Color LaserJet 5500 Series, Color LaserJet 9500 Series |
| C9652-67903 |
PC Board - Formatter board assembly for LJ4200L/LN/LVN |
| C9652-69003 |
PC Board - Formatter board assembly for LJ4200L/LN/LVN |
| RG1-4200-000CN |
PC Board - Paper feeder assembly PC Board - PC Board on right side of 500 sheet paper feeder assembly |
| RG1-4236-040CN |
PC Board - DC controller board - DC Controller for LaserJet 4200 series Part RG1-4236-030CN is no longer supplied. Please order the replacement, RG1-4236-040CN |
| RG1-4237-030CN |
PC Board - DC controller board - DC Controller for LaserJet 4300 series |
| J4135A |
PC Board Interface - JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port - Plugs in one of the EIO slots on selected DesignJet and LaserJet printers |
| J6057AR |
PC Board Interface - JetDirect 615N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector - Comes with software on CD-ROM and manual |
| J6057AR |
PC Board Interface - JetDirect 615N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector - Comes with software on CD-ROM and manual |
| J6058A |
PC Board Interface - HP JetDirect 680N internal wireless IEEE-802.11b (Wi-Fi) print server - Plugs into peripheral EIO slot |
| J6072A |
PC Board Interface - HP bt1300 Bluetooth wireless printer adapter - Allows for wireless printing from Bluetooth enabled PCs, PDAs, phones, and cameras - Connects to either the parallel or USB port on the printer - Includes the power module and power cord |
| J7934G |
PC Board Interface - HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM |
| J7960G |
PC Board Interface - HP Jetdirect 625n internal ethernet print server - Provides 10BaseT, 100BaseTX, or 1000BaseT interface for products with an EIO port |
| RM1-0034-070CN |
Pickup Assembly - Paper pick-up assembly - Paper pickup drive assembly for tray 2 input tray - Does not include the 18-tooth gear - In order to install this part the 18-tooth gear must be removed and replaced |
| RM1-0043-010CN |
Plate - Swing plate assembly - Pressure Roller GearSwing plate assembly - For tray 2 paper lift assembly Located between the main gear assembly and the fuser, just above the power supply. swing plate assembly usually comes with black and white large gears. |
| RM1-0043-020CN |
Plate - Swing plate assembly - Pressure Roller GearSwing plate assembly - For tray 2 paper lift assembly Located between the main gear assembly and the fuser, just above the power supply. swing plate assembly usually comes with black and white large gears. |
| RM1-0043-050CN |
Plate - Swing plate assembly - Pressure Roller GearSwing plate assembly - For tray 2 paper lift assembly Located between the main gear assembly and the fuser, just above the power supply. swing plate assembly usually comes with black and white large gears. |
| Q2425-69002 |
Power Supply - Power supply assembly - 110V |
| Q2425-69015 |
Power Supply - Power supply assembly - 110VAC |
| Q2425-69016 |
Power Supply - Power supply assembly - 220V |
| RM1-0019-000CN |
Power Supply - Power supply assembly - 110VAC |
| RM1-0019-110CN |
Power Supply - Power supply assembly - 110V |
| RM1-0020-130CN |
Power Supply - Power supply assembly - 220VAC |
| J6057A |
Print Server - JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector |
| J7934A |
Print Server - JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
| RM1-0011-000CN |
Registration - Registration assembly unit |
| Q3993A-Repair_LaserJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| RC1-0268-000CN |
Rod - Metal rod between external power button and switch on power supply board |
| KIT42-69005 |
Roller - HP Laser roller kit assembly includes: one - 1 Transfer Roller, 6 - feed Rollers, one - 1 pickup D-roller tray 1, one - 1 separation pad, and transfer roller tool. See replacement instructions on website, printer tech help. |
| RC1-0070-000CN |
Roller - Pressure roller - Roller in fusing assembly that provides pressure for media against the fusing roller |
| RL1-0019-000CN |
Roller - Tray 1 pickup roller - D-shaped roller located under the envelope cover |
| RM1-0015-000CN |
Roller - Fusing roller assembly - 110 volt |
| RM1-0016-000CN |
Roller - Fusing roller - 220 volt |
| RM1-0025-000CN |
Roller - Replacement for PAPER FEED BELT ASSY |
| RM1-0025-020CN |
Roller - Paper feed belt assembly |
| RM1-0026-040CN |
Roller - Paper delivery assembly - Paper output roller assembly |
| RM1-0036-000CN |
Roller - Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24 tooth white gear on one side. Paper pickup roller - For Tray 2, 3 or 4 paper cassette |
| RM1-0036-020CN |
Roller - Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24-tooth white gear on one side |
| RM1-0037-000CN |
Roller - Feed roller high capacity input (HCI) - Transmit the paper from the cassette and feeds it to the device entrance (blue) |
| RM1-0037-020CN |
Roller - Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder |
| RM1-0699-000CN |
Roller - Assembly-Transfer RollerTransfer roller assembly - Long black spongy roller that transfers charge to paper |
| RM1-0699-020CN |
Roller - Assembly-Transfer RollerTransfer roller assembly - Long black spongy roller that transfers charge to paper |
| RM1-1098-000CN |
Roller - Registration roller assembly |
| RM1-1098-030CN |
Roller - Registration roller assembly |
| XA9-1263-000CN |
Screw - M3X5 Phillips washer-head machine screw with a broad, flat washer attached to the screw head - Used to fasten sheet metal parts together |
| XA9-1316-000CN |
Screw - M4X10 Phillips screw with broad flat washer head - Sheet metal thread |
| XB4-7300-605CN |
Screw - Screw - 6 mm Phillips head screw with attached washer |
| RC1-0748-000CN |
Sensor - Paper size sensor block - Spring loaded block which activates the paper size sensor fingers |
| RM1-0041-020CN |
Sensor - Tray 2 paper size tray sensing assembly - White plastic tray size sensing fingers and microswitch assembly |
| RM1-8438-000CN |
Sensor - Environmental sensor assembly |
| WG8-5624-000CN |
Sensor - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated |
| WG8-5849-000CN |
Sensor - Duplex re-pick sensor - Detects the leading edge of the page |
| Q3993A-Manual_Laser |
Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. |
| C8530A |
Service Parts - 8MB Flash DIMM\TO ORDER SEE DESCRIP |
| RC1-0210-000CN |
Shaft - Feeder roller shaft - Axel for Tray 2 feed roller |
| RC1-0210-020CN |
Shaft - Feeder roller shaft - Axel for Tray 2 feed roller |
| WG8-5362-000CN |
Shaft - Photo-sensor (TLP1241) - Sensor flag activated. |
| RM1-0053-000CN |
Shutter - Left side shutter assembly - Blocks light from scanner on left side |
| RM1-0054-000CN |
Shutter - Right side shutter assembly - Blocks light from scanner on right side |
| RH7-5355-000CN |
Solenoid - Paper pick-up solenoid |
| RH7-5357-000CN |
Solenoid - Tray 1 solenoid - Engages Tray 1 pickup roller |
| RK2-0269-000CN |
Solenoid - Paper pick-up solenoid |
| RK2-0276-000CN |
Solenoid - Tray 1 solenoid - Engages tray 1 pick-up roller |
| RC1-0198-000CN |
Spring - Tension spring - Provides tension for lifter drive assembly |
| RC1-0213-000CN |
Spring - Compression spring - Provides pressure for paper pickup and feed rollers in Tray 2 pickup assembly |
| Q2445A |
Stand - LJ 4200 /4300 printer stand and cabinet |
| Q2445B |
Stand - HP printer stand & cabinet (LJ4200/4300) |
| RC1-0344-020CN |
Support - Fan cover - Metal support strap that main cooling fan fastens to - For fan FN101, main cooling fan on right left side of printer |
| RM1-0043-000CN |
Swing - Swing plate assembly - Pressure Roller GearSwing plate assembly - For tray 2 paper lift assembly Located between the main gear assembly and the fuser, just above the power supply. swing plate assembly usually comes with black and white large gears. |
| WC4-5139-000CN |
Switch - Top cover interlock access switch |
| RK2-0359-000CN |
Thermistor - Environment temperature detection thermistor - Detects ambient air temperature to determine length of time for fuser warm up. |
| RK2-0360-000CN |
Thermistor - Environment temperature detection thermistor - Detects ambient air temperature to determine length of time for fuser warm up. |
| RC1-0335-000CN |
Torque Limiter - Torque limiter - Torque limiter for 500 sheet paper feeder pickup roller |
| RM1-0007-100CN |
Transfer Assembly - Paper transfer assembly |
| RM1-0007-190CN |
Transfer Assembly - Paper transfer assembly |
| Q2440A |
Tray - 500-sheet paper feeder and tray/cassette - This is the assembly frame and tray that the printer sits on top of |
| RM1-0004-060CN |
Tray - Tray 1 paper input assembly unit Hewlett Packard LaserJet printers. |
| RM1-0005-020CN |
Tray - Drop down Tray 1 - Includes adjustable paper width guide assembly |
| RM1-1088-000CN |
Tray - 500-sheet tray/cassette - This is only the tray, does not include feeder or frame that tray goes into |
| RM1-1088-050CN |
Tray - 500-sheet tray/cassette - This is only the tray, does not include feeder or frame that tray goes int |
| RM1-1088-070CN |
Tray - 500-sheet tray/cassette - This is only the tray, does not include feeder or frame that tray goes into |
| RM1-1088-090CN |
Tray - 500-sheet tray/cassette - This is only the tray, does not include feeder or frame that tray goes into. |
| Q2440-67903 |
Tray Assembly - 500-sheet paper feeder and tray/cassette - This is the assembly frame and tray that the printer sits on top of |
| Q2440B |
Tray Assembly - 500-sheet paper feeder and tray/cassette - This is the assembly frame and tray that the printer sits on top of |
| RM1-0004-110CN |
Tray Assembly - Tray 1 paper input assembly unit for Hewlett Packard LaserJet printers. |
Techical Help
View service parts