| RM1-0025-040CN |
Belt - Paper feed belt assembly |
| RC1-3339-000CN |
Bracket - Fan rod - Metal rod that mounts against Fan 2 on right side of printer - Used for noise reduction of Fan 2 |
| RC1-0136-000CN |
Bushing - Roller bushing - Bushing that supports middle of paper delivery roller |
| RC1-0206-000CN |
Bushing - Bushing - On right side of paper pickup drive assembly |
| RC1-0264-000CN |
Bushing - Feed roller shaft bushing - Bushing on right side of printer that supports the feed roller shaft. |
| RU5-1408-000CN |
Bushing - Bushing - Feed roller shaft bushing - Bushing on right side of printer that supports the feed roller shaft |
| 5063-1256 |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| C2950A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| C2951A |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| C6518A |
Cable - Universal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long |
| RG1-4204-000CN |
Cable - Size sensor cable - Cable that connects to paper size sensors in 500 sheet feeder assembly |
| RG1-4213-000CN |
Cable - Top Cover cable - From top cover microswitch (SW101) to DC Controller board |
| RG1-4221-000CN |
Cable - Tray 2 paper pickup sensor cable assembly - Connects to sensors PS101 and PS107 |
| RG1-4239-000CN |
Cable - Interface cable assembly - Connects between the 6-pin interface connector and the feeder control board |
| RG1-4240-000CN |
Cable - Media size sensor cable assembly - Connects between the paper size sensor assembly and the feeder control board |
| RG1-4241-000CN |
Cable - Front door sensor cable - Connects between the sensor in the feeder lifter drive assembly and the feeder control board |
| RK2-0288-000CN |
Cable - Ribbon cable - Between DC Controller board (J81) and power supply board (J51) |
| RK2-0290-000CN |
Cable - Ribbon cable - Between DC Controller board (J80) and power supply board (J50) |
| RM1-1189-000CN |
Cable - Top bin full sensor cable |
| RM1-1190-000CN |
Cable - Control panel cable |
| RM1-1192-000CN |
Cable - Power cable for Tray 3 paper feeder - Black connector with 42mm six wire cable to white connector |
| RM1-1193-000CN |
Cable - Envelope feeder cable - From DC Controller board to envelope feeder connector - Includes envelope feeder connector |
| RM1-1198-000CN |
Cable - Laser cable - Connects between DC Controller board and laser scanner unit - J145 to J83 |
| RM1-1216-000CN |
Cable - Fuser cable - Main fuser cable for LaserJet 4250 series |
| RM1-1216-020CN |
Cable - Fuser cable - Main fuser cable for LaserJet 4250 series |
| RM1-1218-000CN |
Cable - A/C input connector/cable - 120VAC input connector to J1 power supply connector |
| RM1-1219-000CN |
Cable - A/C input connector/cable - 220VAC input connector to J1 power supply connector |
| RM1-5078-000CN |
Cable - Inlet cable - For 110 VAC to 127 VAC |
| RM1-5079-000CN |
Cable - Inlet cable - For 220 VAC to 240 VAC |
| H2657E |
Care Pack - HP 3 year Return to Depot for LaserJet 4250 P4015 Service |
| H2664PE |
Care Pack - HP 1 year Post Warranty Next business day Onsite LaserJet 4250 P4015 Hardware Support |
| H2668E |
Care Pack - HP 4 year Next Business Day Onsite for LaserJet 4250 P4015 Hardware Support |
| H2669E |
Care Pack - HP 5 year Next Business Day Onsite for LaserJet 4250 P4015 Hardware Support |
| H4475E |
Care Pack - HP 3 year 4-hour response 13x5 Onsite for LaserJet 4250 P4015 Hardware Support |
| H5479E |
Care Pack - HP 3 year Next Business Day Onsite for LaserJet 4250 P4015 Hardware Support |
| HC128PE |
Care Pack - HP 1 year Post Warranty Phone Assist LaserJet 33-52xx/ScanJet 7-8xxx service |
| U2032PE |
Care Pack - HP 1 year Post Warranty 4 hour response 13x5 Onsite LaserJet 4250 P4015 Hardware Support |
| U4664E |
Care Pack - HP 3 year 4-hour response 9x5 Onsite for LaserJet 4250 P4015 Hardware Support |
| U6396PE |
Care Pack - HP 1 year Post Warranty 4 hour response 9x5 Onsite LaserJet 4250 P4015 Hardware Support |
| U6403PE |
Care Pack - HP 1 year Post Warranty Next business day Exchange LaserJet 4250 P4015 Hardware Support |
| U9805E |
Care Pack - HP 4 year Next Business Day Exchange for LaserJet 4250 P4015 Service |
| U9806E |
Care Pack - HP 5 year Next Business Day Exchange for LaserJet 4250 P4015 Service |
| UA187E |
Care Pack - HP 4 year 4-hour response 13x5 Onsite for LaserJet 4250 P4015 Hardware Support |
| UA188E |
Care Pack - HP 5 year 4-hour response 13x5 Onsite for LaserJet 4250 P4015 Hardware Support |
| UA189E |
Care Pack - HP 4 year 4-hour response 9x5 Onsite for LaserJet 4250 P4015 Hardware Support |
| UA190E |
Care Pack - HP 5 year 4-hour response 9x5 Onsite for LaserJet 4250 P4015 Hardware Support |
| UA311E |
Care Pack - HP Maintenance Kit Replacement for LaserJet 4240 4250 4350 Fuser 110V Service |
| UC742E |
Care Pack - HP Network Install Mono Mid-range LaserJet Service |
| UK663E |
Care Pack - HP 3 year Next Business Day plus Defective Media Retention for LaserJet 4250 P4015 Hardware Support |
| UK671PE |
Care Pack - HP 1 yr Post Warranty Next Business Day plus Defective Media Retention LaserJet4250 P4015 Support |
| UT819PE |
Care Pack - HP 2 year Post-Warranty Next business day onsite LaserJet 4250 P4015 Hardware Support |
| Q3216-60500 |
Cartridge - Staple cartridge assembly - Contains three cartridges of 1000 staples each - For the staple module assembly in the 500-sheet stacker/stapler unit |
| Q3216A |
Cartridge - Staple cartridge assembly - Has 1,000 staples - For the staple module assembly in the 500-sheet stacker/stapler unit |
| Q5942-67901 |
Cartridge - Black Toner Cartridge - With `Micro-Fine` toner - Prints approximately 10,000 pages |
| Q5942-67901 |
Cartridge - Black Toner Cartridge - With `Micro-Fine` toner - Prints approximately 10,000 pages |
| Q5942-67902 |
Cartridge - Black Toner Cartridge - With 'Micro-Fine' toner - Prints approximately 20,000 pages |
| Q5942-67902 |
Cartridge - Black Toner Cartridge - With 'Micro-Fine' toner - Prints approximately 20,000 pages |
| Q5942A |
Cartridge - Black Toner Cartridge - With 'Micro-Fine' toner - Prints approximately 10,000 pages |
| Q5942X |
Cartridge - Black Toner Cartridge - With 'Micro-Fine' toner - Prints approximately 20,000 pages |
| RM1-1089-000CN |
Cassette - Cassette Rear Assy |
| RM1-1089-030CN |
Cassette - Cassette Rear Assy |
| 5090-3379 |
Cleaner - Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills |
| XD9-0232-000CN |
Clip - E-ring keeper - Attaches to drive end of registration roller to secure cluster gear |
| XD9-0234-000CN |
Clip - E-Type retainer ring |
| RK2-0349-000CN |
Clutch - Paper feed assembly clutch (CL101) - Electro mechanical clutch that connects to the white 30-tooth gear |
| RM1-0042-000CN |
Connector - Accessory cable/connector - Connector for stacker and stacker/stapler accessory at top right rear of printer |
| VS1-7333-006CN |
Connector - Duplexer connector - Connector on power supply assembly for duplexer |
| VS1-7500-006CN |
Connector - Connector (6-point) |
| VS1-7514-006CN |
Connector - Duplexer connector - Connector on power supply assembly for duplexer |
| RM1-1195-000CN |
Control Panel - Control panel assembly |
| RC1-0019-000CN |
Cover - Inner right front cover |
| RC1-0288-000CN |
Cover - Formatter board cover |
| RC1-0289-000CN |
Cover - Top rear cover of printer - Removes for Stapler/Stacker installation |
| RC1-0320-000CN |
Cover - Envelope cover - Plastic piece above Tray 1 pickup roller |
| RC1-0486-020CN |
Cover - Upper front cover - Small piece of plastic on top front edge of 500 sheet feeder |
| RC1-0487-020CN |
Cover - Left side cover for 500 sheet paper feeder assembly |
| RC1-0488-020CN |
Cover - Right side cover for 500 sheet paper feeder assembly |
| RC1-0500-020CN |
Cover - Cover plate - Plastic cover on right front corner of 500 sheet feeder tray - Covers removable tray number designator plate. Part approaching End of Life, please contact HP for availability |
| RC1-0509-000CN |
Cover - Rear cover - Rear plastic cover for 500 sheet paper feeder |
| RC1-0661-000CN |
Cover - Right side cover assembly - For the 1,500 sheet paper feeder assembly |
| RC1-0662-000CN |
Cover - Left side cover assembly - For the 1,500 sheet paper feeder assembly |
| RC1-0663-000CN |
Cover - Rear cover assembly - Box type cover for the rear of the 1,500 sheet paper feeder assembly |
| RC1-3280-000CN |
Cover - Duplexer slot cover - Removable lower rear cover for Duplexer attachment slot |
| RC1-3282-000CN |
Cover - Lower rear cover - Covers rear of standard 500 sheet tray |
| RM1-0027-000CN |
Cover - Rear output tray assembly - Includes upper rear paper output tray and cover |
| RM1-0027-020CN |
Cover - Rear output tray assembly - Includes upper rear paper output tray and cover |
| RM1-0050-000CN |
Cover - Front cover - Drop down Tray 1 |
| RM1-0050-050CN |
Cover - Front cover - Drop down Tray 1 |
| RM1-0273-070CN |
Cover - Front cover (or door) - Provides access to load paper in the 1,500 sheet paper feeder assembly |
| RM1-0274-020CN |
Cover - Front cover assembly |
| RM1-1076-000CN |
Cover - Right side cover assembly |
| RM1-1077-000CN |
Cover - Left side cover panel |
| RM1-1080-000CN |
Cover - Cartridge access door cover for LaserJet 4250/4350 family |
| RM1-1081-000CN |
Cover - Top cover assembly - Top paper output tray and top of printer |
| RC1-0330-020CN |
Damper - Solenoid damper - Locate on right side of Tray 2 guide - Works with kicker to dampen Tray 2 pickup solenoid on right side of tray guide |
| RM1-0026-000CN |
Delivery - Paper delivery assembly - Paper output roller assembly |
| RM1-0026-020CN |
Delivery - Paper delivery assembly - Paper output roller assembly |
| J6073-61021 |
Drive Assembly - Hd, eio 40g rohs high performance hard disk - plugs in one of the extended input/output (eio) slots |
| J6073-61051 |
Drive Assembly - Hd, eio 40g rohs high performance hard disk - plugs in one of the extended input/output (eio) slots |
| J6073-61091 |
Drive Assembly - 120G kit, GPSC |
| J6073-69021 |
Drive Assembly - Hd, eio 40g rohs high performance hard disk - plugs in one of the extended input/output (eio) slots |
| RC1-0200-020CN |
Drive Assembly - Lifter drive assembly support - Tray 2 paper pickup lifter drive support assembly |
| RG1-4276-030CN |
Drive Assembly - Control panel assembly |
| RM1-0056-040CN |
Drive Assembly - Paper pickup drive assembly - Gear assembly on right front side of 500 sheet paper feeder assembly |
| RM1-0056-070CN |
Drive Assembly - Paper pickup drive assembly - Gear assembly on right front side of 500 sheet paper feeder assembly |
| RM1-1066-000CN |
Drive Assembly - Main drive assembly - Main gear assembly on right side of printer |
| RM1-1094-000CN |
Drive Assembly - Lifter drive assembly for 500 sheet feeder |
| RM1-1094-050CN |
Drive Assembly - Lifter drive assembly for 500 sheet feeder |
| RM1-1133-020CN |
Drive Assembly - Paper pickup roller drive assembly for 1500 sheet feeder |
| RM1-1136-000CN |
Drive Assembly - Lifter drive assembly for 1500 sheet feeder |
| RC1-3338-000CN |
Duct - Fan duct - Air duct and fan mount for Fan 2 - Fan duct on right side of printer |
| Q2439-67902 |
Duplexer - Automatic duplexer assembly - For LaserJet 4200/4250 and 4300/4350 series printers |
| Q2439-69002 |
Duplexer - Automatic duplexer assembly - For LaserJet 4200/4250 and 4300/4350 series printers |
| Q2439-69003 |
Duplexer - Automatic duplexer assembly - For LaserJet 4200/4250 and 4300/4350 series printers |
| Q2439B |
Duplexer - Automatic duplexer assembly - For LaserJet 4200/4250 and 4300/4350 series printers |
| RK2-0278-000CN |
Fan - Cooling fan - Located on left side of printer (FN101) |
| RK2-0280-000CN |
Fan - Cooling fan (FN105) - Located on right side of printer - Provides air to the print cartridge area |
| 5851-4076 |
Feeder - Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly |
| Q2438-67902 |
Feeder - Envelope feeder assembly - Holds up to 75 envelopes - Mounts in the tray 1 slot on the front of the printer |
| Q2438B |
Feeder - Envelope feeder assembly - Holds up to 75 envelopes - Mounts in the tray 1 slot on the front of the printer - Includes the envelope tray and multi-lingual installation instructions |
| Q2440-69003 |
Feeder - 500-sheet paper feeder and tray/cassette - This is the assembly frame and tray that the printer sits on top of |
| Q2443A |
Feeder - 500-Sheet paper stacker/stapler assembly - Provides additional output capacity and can staple output copies for the LaserJet 4200 or 4300 printers - Mounts on top of the printer |
| Q2444A |
Feeder - 1500 sheet paper tray and feeder assembly for LaserJet products series printers. |
| RC1-0060-050CN |
Feeder - Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly |
| RC1-0061-000CN |
Feeder - Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly |
| RM1-0012-020CN |
Feeder - Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly |
| Q7725-67943 |
Firmware - Replacement for part Q7725-67943 ORDER Q7725-67954 LJ4240/50/4350 32MB FLSHMEM CD 08.011.1 |
| Q7725-67985 |
Firmware - LJ4240/4250/4350 FMC-32MB Flas |
| Q7725-67999 |
Firmware - LJ4240/50/4350 32MB Flash |
| RC1-0060-030CN |
Flag - Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly |
| RC1-0209-000CN |
Flag - Paper sensor flag for Tray 2 paper pickup assembly |
| RC1-0209-020CN |
Flag - Paper sensor flag for Tray 2 paper pickup assembly |
| RL1-0015-000CN |
Flag - Kicker assembly - Mounts to right side of the printer and is connected to the right side guide - Senses when the paper cassette is inserted into the printer |
| Q2625-67951 |
Flash Card - 64MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q2626A |
Flash Card - 128MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q2627-67951 |
Flash Card - 256MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q6009-67951 |
Flash Card - HP 96MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7725-67954 |
Flash Card - Flash memory - 32MB Flash memory card for LaserJet 4240, 4250 and 4350 series - Version 08.013.4 |
| RB1-8107-000CN |
Foot - Rubber foot - Replacement rubber foot for the bottom of the printer (four used) |
| RM1-1082-000CN |
Fuser Assembly - Fuser Assembly - For 110 VAC - Bonds toner to paper with heat |
| RM1-1082-070CN |
Fuser Assembly - Fuser assembly - For LaserJet 4250/4350 series - 110 VAC |
| RM1-1082-090CN |
Fuser Assembly - Fuser assembly - For LaserJet 4250/4350 series - 110 VACFusing assembly - For 110 VAC - Bonds toner to paper with heat |
| RM1-1082-100CN |
Fuser Assembly - fusing assy 110v |
| RM1-1083-070CN |
Fuser Assembly - Fuser assembly - For LaserJet 4250/4350 series - 220 VAC |
| RM1-1083-090CN |
Fuser Assembly - Fuser assembly - For 220 VAC - For LaserJet 4250/4350 series |
| RM1-1083-100CN |
Fuser Assembly - Fussing assy 220vFussing assy 220v Replaced: RM1-1083-070CN |
| RC1-0371-000CN |
Gear - 23 Gear - Gear that drives paper feed roller - Attaches to feed roller shaft |
| RC1-3324-000CN |
Gear - Fuser gear unit 40t driven by swing plate assembly unit. Gear attaches to fuser unit and driven by swing plate. |
| RL1-0264-000CN |
Gear - Gear - Gear with attached shaft - Driven by pickup drive assembly on right front of printer |
| RM1-0002-020CN |
Gear - Duplexing pendulum assembly - Gear assembly that transfers power from main motor to run duplexing capability |
| RM1-0286-000CN |
Gear - Paper level sensor gear assembly |
| RM1-1091-000CN |
Gear - FUSER GEAR UNIT. Gear is attached on the fuser and the swing plate unit.(for Fuser gear unit and swing plate assy. kit order (5851-2766). |
| RU5-0015-000CN |
Gear - 14T/30T cluster gear |
| RU5-0040-000CN |
Gear - Gear - 23 tooth gear in lower front section of pickup drive assembly |
| RU5-0045-020CN |
Gear - 18 tooth gear - Located on right side of printer in the Tray 2 paper pickup assembly |
| RU5-0045-030CN |
Gear - 18-tooth gear - Located on right side of printer in the tray 2 paper pickup assembly Part. |
| RU5-0050-000CN |
Gear - 30 tooth gear - Black plastic gear that attaches to paper feed assembly clutch |
| RU5-0088-000CN |
Gear - 18 tooth gear - Located on right side of printer in the 500 sheet tray paper pickup assembly |
| RU5-0277-000CN |
Gear - Gear for swing plate Assembly HP LaserJet 4200 4300 Series 41T gear. |
| RM1-0002-030CN |
Gear Assembly - Duplexing pendulum assembly - Gear assembly that transfers power from main motor to run duplexing capability |
| RM1-0286-020CN |
Gear Assembly - Paper level sensor gear assembly |
| RC1-0242-000CN |
Guard - Inner right side edge guard - Small plastic guard that protects wires inside chassis on right side of printer. |
| RC1-0247-000CN |
Guard - Right side edge guard - Small plastic guard that protects wires - Mounts on right outer side of printer chassis. |
| RC1-0153-030CN |
Guide - Right side Tray 2 paper cassette guide |
| RC1-0243-000CN |
Guide - Right front power supply guide - Attaches to right side of printer chassis |
| RC1-0244-000CN |
Guide - Support guide - Supports right rear side of power supply board |
| RC1-0269-020CN |
Guide - DC Controller flat cable guide |
| RC1-0270-020CN |
Guide - DC Controller board cable guide |
| RC1-0273-000CN |
Guide - Paper feed belt guide for left side |
| RC1-0274-020CN |
Guide - Paper feed belt guide for right side |
| RC1-0340-020CN |
Guide - Guide for scanner cable 1 |
| RC1-0385-000CN |
Guide - Guide for scanner cable 2 |
| RC1-0386-000CN |
Guide - Connecting cable guide - Routes and protects all cables running from top portion of printer to the DC controller board |
| RC1-3340-000CN |
Guide - DC Controller board cable guide |
| J6073A |
Hard Drive - High performance 20GB hard disk - Plugs in one of the Extended Input/Output (EIO) slots |
| J6073G |
Hard Drive - High performance 20GB hard disk - Plugs in one of the Extended Input/Output (EIO) slots |
| RC1-0208-030CN |
Holder - Paper sensor flag holder |
| RC1-0211-000CN |
Holder - Paper pickup arm - Pickup and feed roller holder for Tray 2 paper pickup assembly |
| RC1-0212-000CN |
Holder - Paper pickup arm holder - Holder for pickup roller shaft |
| RC1-0342-020CN |
Holder - Thermistor holder - Plastic inside half of thermistor holder |
| RC1-0343-020CN |
Holder - Thermistor holder - Metal outside half of thermistor holder |
| RC1-3352-000CN |
Holder - Paper pickup arm - Pickup and feed roller holder for Tray 2 paper pickup assembly |
| RM1-1097-000CN |
Input Assembly - Tray 1 paper input assembly |
| Q5421A |
Kit - HP LaserJet 4250/4350 maintenance kit - For 120 VAC - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500-sheet tray and installation instructions |
| Q5422A |
Kit - HP LaserJet 4250/4350 maintenance kit - 220 VAC - Includes fusing assembly, separation roller, transfer roller, feed roller and pick-up roller for tray 1, two feed rollers for 500-sheet tray, installation instructions, and gloves |
| RM1-1067-000CN |
Laser Scanner - Replacement for part RM1-1067-000CN Laser/scanner assembly for 4250/4350 series LaserJet printers |
| RM1-1067-030CN |
Laser Scanner - Replacement for part RM1-1067-000CN Laser/scanner assembly for 4250/4350 series LaserJet printers |
| 5851-2766 |
Lifter - Swing plate assembly kit - For Tray 2 paper lift assembly - Located between the main gear assembly and the fuser, just above the power supply - Contains swing plate assembly and new fuser pressure release gear |
| RM1-0043-060CN |
Lifter - Swing plate assembly - Pressure Roller GearSwing plate assembly - For tray 2 paper lift assembly Located between the main gear assembly and the fuser, just above the power supply. swing plate assembly usually comes with black and white large gears. |
| RM1-1074-000CN |
Lifter - Tray 2 lifter drive assembly - Provides lift support for paper tray |
| RM1-1074-040CN |
Lifter - Tray 2 lifter drive assembly - Provides lift support for paper tray |
| Q5421-67901 |
Maintenance Kit - LaserJet 4250/4350 maintenance kit - (120V) - Includes Fuser Assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray and installation instructions |
| Q5421-67902 |
Maintenance Kit - LaserJet 4250/4350 maintenance kit - For 120VAC - Includes fusing assembly, separation roller, transfer roller, feed roller for tray 1, two feed rollers for 500 sheet tray and installation instructions |
| Q5421-67903 |
Maintenance Kit - HP LaserJet 4250/4350 maintenance kit - For 120VAC - Includes fusing assembly, separation roller, transfer roller, feed roller for tray 1, two feed rollers for 500 sheet tray and installation instructions |
| Q5421A |
Maintenance Kit - HP LaserJet 4250/4350 maintenance kit - For 120 VAC - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500-sheet tray and installation instructions |
| Q5421A |
Maintenance Kit - HP LaserJet 4250/4350 maintenance kit - For 120 VAC - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500-sheet tray and installation instructions |
| Q5421A |
Maintenance Kit - HP LaserJet 4250/4350 maintenance kit - For 120 VAC - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500-sheet tray and installation instructions |
| Q5421A |
Maintenance Kit - HP LaserJet 4250/4350 maintenance kit - For 120 VAC - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500-sheet tray and installation instructions |
| Q5421A |
Maintenance Kit - HP LaserJet 4250/4350 maintenance kit - For 120 VAC - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500-sheet tray and installation instructions |
| Q5421A |
Maintenance Kit - HP LaserJet 4250/4350 maintenance kit - For 120 VAC - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500-sheet tray and installation instructions |
| Q5421A |
Maintenance Kit - HP LaserJet 4250/4350 maintenance kit - For 120 VAC - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500-sheet tray and installation instructions |
| Q5421A |
Maintenance Kit - HP LaserJet 4250/4350 maintenance kit - For 120 VAC - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500-sheet tray and installation instructions |
| Q5421A |
Maintenance Kit - HP LaserJet 4250/4350 maintenance kit - For 120 VAC - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500-sheet tray and installation instructions |
| Q5421A |
Maintenance Kit - HP LaserJet 4250/4350 maintenance kit - For 120 VAC - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500-sheet tray and installation instructions |
| Q5421A |
Maintenance Kit - HP LaserJet 4250/4350 maintenance kit - For 120 VAC - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500-sheet tray and installation instructions |
| Q5421A |
Maintenance Kit - HP LaserJet 4250/4350 maintenance kit - For 120 VAC - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500-sheet tray and installation instructions |
| Q5421A |
Maintenance Kit - HP LaserJet 4250/4350 maintenance kit - For 120 VAC - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500-sheet tray and installation instructions |
| Q5421A |
Maintenance Kit - HP LaserJet 4250/4350 maintenance kit - For 120 VAC - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500-sheet tray and installation instructions |
| Q5421A |
Maintenance Kit - HP LaserJet 4250/4350 maintenance kit - For 120 VAC - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500-sheet tray and installation instructions |
| Q5421A |
Maintenance Kit - HP LaserJet 4250/4350 maintenance kit - For 120 VAC - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500-sheet tray and installation instructions |
| Q5421A |
Maintenance Kit - HP LaserJet 4250/4350 maintenance kit - For 120 VAC - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500-sheet tray and installation instructions |
| Q5421A |
Maintenance Kit - HP LaserJet 4250/4350 maintenance kit - For 120 VAC - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500-sheet tray and installation instructions |
| Q5421A |
Maintenance Kit - HP LaserJet 4250/4350 maintenance kit - For 120 VAC - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500-sheet tray and installation instructions |
| Q5421A |
Maintenance Kit - HP LaserJet 4250/4350 maintenance kit - For 120 VAC - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500-sheet tray and installation instructions |
| Q5422-67901 |
Maintenance Kit - LaserJet 4250/4350 maintenance kit - (220V) - Includes Fuser Assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray and installation instructions |
| Q5422-67903 |
Maintenance Kit - HP LaserJet 4250/4350 maintenance kit - 220 VAC - Includes fusing assembly, separation roller, transfer roller, feed roller and pick-up roller for tray 1, two feed rollers for 500-sheet tray, installation instructions, and gloves |
| Q5422A |
Maintenance Kit - HP LaserJet 4250/4350 maintenance kit - 220 VAC - Includes fusing assembly, separation roller, transfer roller, feed roller and pick-up roller for tray 1, two feed rollers for 500-sheet tray, installation instructions, and gloves |
| Q5400-90932 |
Manual - LaserJet 4200/4250/4300/4350 combined service manual - English only |
| Q2625A |
Memory - 64MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q2626-67951 |
Memory - 128MB, 100-pin, DDR SDRAM DIMM memory module |
| Q2627A |
Memory - 256MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q2628A |
Memory - HP 512MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7715-67951 |
Memory - 64MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7717-67951 |
Memory - HP 96MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7718-67951 |
Memory - 128MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7719-67951 |
Memory - 256MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7720-67951 |
Memory - 512MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7725KE |
Memory - Flash memory card - 32M - Version 08.013.4 |
| RH7-1603-000CN |
Motor - Motor - Stepper motor in 1500 sheet feeder assembly |
| RH7-1603-020CN |
Motor - Motor - Stepper motor in 1500 sheet feeder assembly |
| RK2-0272-000CN |
Motor - Main motor - M101 FOR HEWLETT PACKARD LaserJet MODELS. |
| RK2-0273-000CN |
Motor - Main motor - M101 FOR HEWLETT PACKARD LaserJet MODELS. |
| RK2-0274-000CN |
Motor - Toner cartridge motor - Motor on front right side of printer (M102) |
| RK2-0275-000CN |
Motor - Toner cartridge motor (M102) - Mounts on the front right side of the printer |
| RL1-0013-000CN |
Mount - Swing plate - Pivot mount for pickup roller shaft |
| 7121-8044 |
NamePlate - Logo Emblem HP Jewel No.5 |
| 7121-8286 |
NamePlate - HP jewel - Small plastic HP logo that attaches to top of printer |
| Q5404-40001 |
NamePlate - nameplate for LaserJet 4250DTNSL |
| Q5406-67911 |
NamePlate - LaserJet 4250 Nameplate kit - Includes nameplates for LaserJet 4250/n, tn, dtn, dtnsl and HP logo jewel. |
| RC1-3356-000CN |
Overlay - Control panel overlay - English |
| RL1-0007-000CN |
Pad - Tray 1 paper separation pad |
| HPJ1124 |
Paper - HP LaserJet Paper - A size (8.5 x 11-inches) - 500 sheets |
| HPJ1424 |
Paper - HP LaserJet Paper - 21.6cm (8.5in) x 35.5cm (14in) - 500 sheets |
| HPM1420 |
Paper - HP Multipurpose Paper - Legal size (8.5 x 14 inches) - 500 sheets |
| HPU1132 |
Paper - HP Premium Choice LaserJet Paper - A size (8.5 x 11-inches) - 500 sheets |
| Q2546A |
Paper - Paper (Glossy) for LaserJet 3390 All-in-One, LaserJet 3000 Series, Color LaserJet 4700, Color LaserJet 3000 series |
| Q2442-67902 |
Paper Stacker - 500-Sheet paper stacker assembly - Provides additional output capacity for the LaserJet 4200/4250 or 4300/4350 printers - Mounts on top of the printer |
| Q2442B |
Paper Stacker - 500-sheet paper stacker output assembly |
| Q2443-67908 |
Paper Stacker - 500-Sheet paper stacker/stapler assembly - Provides additional output capacity and can staple output copies for the LaserJet 4200 or 4300 printers - Mounts on top of the printer |
| Q2443B |
Paper Stacker - 500-Sheet paper stacker/stapler assembly - Provides additional output capacity and can staple output copies for the LaserJet 4200 or 4300 printers - Mounts on top of the printer |
| Q3652-67904 |
PC Board - LJ4240/4250/4350 Formattr w/JDI 08.160.4Formatter (main logic) PC board assembly - For LaserJet 4240/4250/4350 - For network capable models only - Version 08.017.1 |
| Q3652-67907 |
PC Board - LJ4240/4250/4350 Formattr w/JDI 08.160.4Formatter (main logic) PC board assembly - For LaserJet 4240/4250/4350 - For network capable models only - Version 08.017.1 |
| Q3652-69004 |
PC Board - LJ4240/4250/4350 Formattr w/JDI 08.160.4Formatter (main logic) PC board assembly - For LaserJet 4240/4250/4350 - For network capable models only - Version 08.017.1 |
| Q3652-69005 |
PC Board - Formatter board assembly - 4240/4250/4350 network capable models only |
| Q3652-69007 |
PC Board - LJ4240/4250/4350 Formattr w/JDI 08.160.4Formatter (main logic) PC board assembly - For LaserJet 4240/4250/4350 - For network capable models only - Version 08.017.1 |
| Q6505-67905 |
PC Board - Formatter (main logic) PC board assembly - For LaserJet 4240/4250/4350 - For network capable models only - Version 08.017.1 |
| Q6505-67907 |
PC Board - Formatter board assembly - 4240/4250/4350 network capable models only |
| Q6505-69005 |
PC Board - Formatter board assembly - 4240/4250/4350 network capable models only |
| Q6505-69009 |
PC Board - LJ4240/4250/4350 Formattr w/JDI 08.160.4Formatter (main logic) PC board assembly - For LaserJet 4240/4250/4350 - For network capable models only - Version 08.017.1 |
| Q6505-69010 |
PC Board - Formatter (main logic) PC board assembly - For LaserJet 4240/4250/4350 - For network capable models only - Version 08.017.1. Part approaching End of Life, please contact HP for availability |
| Q6506-69009 |
PC Board - Formatter board assembly- For LaserJet 4240/4250/4350 |
| Q6506-69010 |
PC Board - Formatter board assembly - 4250/4350 non-network capable models only Formatter (main logic) PC board assembly - For LaserJet 4240/4250/4350 - Without network capability - Version |
| RG1-4374-000CN |
PC Board - 1500 sheet feeder assembly PC board |
| RM1-1108-060CN |
PC Board - DC controller board - DC Controller for LaserJet 4250/4350 series |
| RM1-1108-130CN |
PC Board - DC controller board - DC Controller for LaserJet 4250/4350 series |
| J3258A |
PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN |
| J3258G |
PC Board Interface - HP JetDirect 170X external print server module (10Base-T) - Connects between printer parallel port and LAN network |
| J3265G |
PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
| J4102C |
PC Board Interface - HP Jetdirect 170x Office Connect Print Server |
| J6035A |
PC Board Interface - HP JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port |
| J6035B |
PC Board Interface - HP JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port |
| J6035C |
PC Board Interface - JetDirect 175X Fast Ethernet external print server - Has on 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port |
| J6035D |
PC Board Interface - HP JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port |
| J6058A |
PC Board Interface - HP JetDirect 680N internal wireless IEEE-802.11b (Wi-Fi) print server - Plugs into peripheral EIO slot |
| J6060A |
PC Board Interface - HP Jet Direct 300X external print server module (Three pack) (10Base-T and 100Base-T) - Connects between printer parallel port and LAN network - Three Pack |
| J6061A |
PC Board Interface - HP JetDirect 380X external IEEE-802.11b (Wi-Fi) wireless print server - Connects to printer using Universal Serial Bus (USB) cable |
| J6072A |
PC Board Interface - HP bt1300 Bluetooth wireless printer adapter - Allows for wireless printing from Bluetooth enabled PCs, PDAs, phones, and cameras - Connects to either the parallel or USB port on the printer - Includes the power module and power cord |
| J7934G |
PC Board Interface - HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM |
| J7942A |
PC Board Interface - HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module |
| J7942G |
PC Board Interface - HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module |
| J7951G |
PC Board Interface - HP Jetdirect ew2400 802.11g wireless print server module - Includes power supply, USB cable, LAN/Ethernet cable, setup documentation and software |
| J7960G |
PC Board Interface - HP Jetdirect 625n internal ethernet print server - Provides 10BaseT, 100BaseTX, or 1000BaseT interface for products with an EIO port |
| J7961G |
PC Board Interface - HP Jetdirect 635n IPv6/IPsec Print Server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM;Click to order the functional equivalent: J7961-69011 |
| RM1-0034-070CN |
Pickup Assembly - Paper pick-up assembly - Paper pickup drive assembly for tray 2 input tray - Does not include the 18-tooth gear - In order to install this part the 18-tooth gear must be removed and replaced |
| RM1-0043-010CN |
Plate - Swing plate assembly - Pressure Roller GearSwing plate assembly - For tray 2 paper lift assembly Located between the main gear assembly and the fuser, just above the power supply. swing plate assembly usually comes with black and white large gears. |
| RM1-0043-020CN |
Plate - Swing plate assembly - Pressure Roller GearSwing plate assembly - For tray 2 paper lift assembly Located between the main gear assembly and the fuser, just above the power supply. swing plate assembly usually comes with black and white large gears. |
| RM1-0043-050CN |
Plate - Swing plate assembly - Pressure Roller GearSwing plate assembly - For tray 2 paper lift assembly Located between the main gear assembly and the fuser, just above the power supply. swing plate assembly usually comes with black and white large gears. |
| RM1-1070-000CN |
Power Supply - Power supply assembly - For LaserJet 4240/4250/4350 - For 110VAC to 127VAC operation |
| RM1-1070-040CN |
Power Supply - Power supply assembly - For LaserJet 4240/4250/4350 - For 110V to 127VAC operation |
| RM1-1070-050CN |
Power Supply - Power supply assembly - For LaserJet 4240/4250/4350 - For 110VAC to 127VAC operation |
| RM1-1071-000CN |
Power Supply - Power supply assembly - For LaserJet 4240/4250/4350 - For 220V to 240VAC operation |
| RM1-1071-040CN |
Power Supply - Power supply assembly - For LaserJet 4240/4250/4350 - For 220V to 240VAC operation |
| J3265A |
Print Server - External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
| J7934-61001 |
Print Server - JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
| J7934-61011 |
Print Server - JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
| J7934-69001 |
Print Server - JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
| J7934-69011 |
Print Server - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector;Click to order the functional equivalent: J7934-69021 |
| J7934A |
Print Server - JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
| J7951A |
Print Server - JetDirect ew2400 802.11g wireless print server module |
| J7960A |
Print Server - Jetdirect 625n internal ethernet print server - Provides 10BaseT, 100BaseTX, or 1000BaseT interface for products with an EIO port |
| RM1-0011-000CN |
Registration - Registration assembly unit |
| Q5404A-Repair_LaserJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| XD9-0234-010CN |
Retainer - E-Type retainer ring/clip |
| RC1-0268-000CN |
Rod - Metal rod between external power button and switch on power supply board |
| KIT42-69005 |
Roller - HP Laser roller kit assembly includes: one - 1 Transfer Roller, 6 - feed Rollers, one - 1 pickup D-roller tray 1, one - 1 separation pad, and transfer roller tool. See replacement instructions on website, printer tech help. |
| RL1-0019-000CN |
Roller - Tray 1 pickup roller - D-shaped roller located under the envelope cover |
| RM1-0026-040CN |
Roller - Paper delivery assembly - Paper output roller assembly |
| RM1-0036-000CN |
Roller - Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24 tooth white gear on one side. Paper pickup roller - For Tray 2, 3 or 4 paper cassette |
| RM1-0037-000CN |
Roller - Feed roller high capacity input (HCI) - Transmit the paper from the cassette and feeds it to the device entrance (blue) |
| RM1-0037-020CN |
Roller - Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder |
| RM1-1098-000CN |
Roller - Registration roller assembly |
| RM1-1098-030CN |
Roller - Registration roller assembly |
| RM1-1110-000CN |
Roller - Transfer roller assembly - Long black spongy roller that transfers charge to paper |
| RC1-0266-020CN |
Screw - M3 stepped shaft screw |
| XA9-1420-000CN |
Screw - M3 pan head phillips screw with captive flat and split-lock washers - 8mm long |
| XA9-1500-000CN |
Screw - M3 pan-head Phillips screw with flat washer - 8mm long |
| XA9-1503-000CN |
Screw - M3 truss head (Flanged) phillips screw (Black oxide finish) - 6mm long |
| RC1-0748-000CN |
Sensor - Paper size sensor block - Spring loaded block which activates the paper size sensor fingers |
| RM1-0041-020CN |
Sensor - Tray 2 paper size tray sensing assembly - White plastic tray size sensing fingers and microswitch assembly |
| RM1-0285-000CN |
Sensor - Paper sensor assembly - Includes the support tray with the paper stack surface and paper detection sensors, associated sensor flags, and cable assembly. Part approaching End of Life, please contact HP |
| RM1-0294-000CN |
Sensor - Paper size sensor assembly - Includes the three size fingers, micro-switch assembly and housing assembly |
| RM1-8438-000CN |
Sensor - Environmental sensor assembly |
| WG8-5624-000CN |
Sensor - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated |
| WG8-5849-000CN |
Sensor - Duplex re-pick sensor - Detects the leading edge of the page |
| Q5404A-Manual_Laser |
Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. |
| RC1-3303-000CN |
Service Parts - Detent stop for 500 sheet feeder |
| RK2-0269-000CN |
Solenoid - Paper pick-up solenoid |
| RK2-0276-000CN |
Solenoid - Tray 1 solenoid - Engages tray 1 pick-up roller |
| RC1-0198-000CN |
Spring - Tension spring - Provides tension for lifter drive assembly |
| RC1-0213-000CN |
Spring - Compression spring - Provides pressure for paper pickup and feed rollers in Tray 2 pickup assembly |
| RC1-0254-000CN |
Spring - Torsion spring - Provides tension for Tray 2 kicker - Mounts on Tray 2 guide assembly |
| RC1-0307-000CN |
Spring - Grounding leaf spring - Attaches to right side bottom of top cover assembly |
| RC1-1923-000CN |
Spring - Torsion spring - Provides tension for paper sensor flag |
| Q2443-69001 |
Stacker Assembly - 500-Sheet paper stacker/stapler assembly - Provides additional output capacity and can staple output copies for the LaserJet 4200 or 4300 printers - Mounts on top of the printer |
| Q2445-67902 |
Stand - Printer stand with storage cabinet |
| Q2445B |
Stand - HP printer stand & cabinet (LJ4200/4300) |
| RC1-7890-000CN |
Stop - Detent stop for 500 sheet feeder |
| RC1-0344-020CN |
Support - Fan cover - Metal support strap that main cooling fan fastens to - For fan FN101, main cooling fan on right left side of printer |
| RM1-0043-000CN |
Swing - Swing plate assembly - Pressure Roller GearSwing plate assembly - For tray 2 paper lift assembly Located between the main gear assembly and the fuser, just above the power supply. swing plate assembly usually comes with black and white large gears. |
| WC4-5139-000CN |
Switch - Top cover interlock access switch |
| RC1-3304-000CN |
Tab - Tray number display - Changeable tray number tab for optional 500 sheet feeder |
| RK2-0359-000CN |
Thermistor - Environment temperature detection thermistor - Detects ambient air temperature to determine length of time for fuser warm up. |
| RC1-0335-000CN |
Torque Limiter - Torque limiter - Torque limiter for 500 sheet paper feeder pickup roller |
| Q2444B |
Tray - 1500 sheet high capacity paper input tray |
| RM1-0005-020CN |
Tray - Drop down Tray 1 - Includes adjustable paper width guide assembly |
| RM1-0248-000CN |
Tray - Paper (delivery) tray assembly - Holds the output from the 500-sheet paper stacker (or stacker/stapler) assembly - Snap-locks on the front of the assembly |
| RM1-1088-070CN |
Tray - 500-sheet tray/cassette - This is only the tray, does not include feeder or frame that tray goes into |
| Q2440-67903 |
Tray Assembly - 500-sheet paper feeder and tray/cassette - This is the assembly frame and tray that the printer sits on top of |
| Q2440B |
Tray Assembly - 500-sheet paper feeder and tray/cassette - This is the assembly frame and tray that the printer sits on top of |
| Q2444-67902 |
Tray Assembly - 1500 sheet paper tray and feeder assembly for LaserJet 4200/4300 series printers |
| RM1-1097-040CN |
Tray Assembly - Tray 1 paper input assembly |
Techical Help
View service parts