| Q3938-67999 |
ADF - ADF MAINTENANCE KIT ADF maintenance kit - Includes the ADF paper pickup roller assembly and the separation pad assembly |
| Q7829-67901 |
ADF - ADF assembly - Includes rear cover, cable, input tray, front cover, white scan background, mylar holder assembly, left cover, photo interrepter with conector, PCA motor |
| Q7829-67917 |
ADF - ADF float assembly |
| Q7829-67939 |
ADF - ADF assembly - Includes rear cover, cable, input tray, front cover, white scan background, mylar holder assembly, left cover, photo interrepter with conector, PCA motor |
| Q7829-67944 |
ADF - ADF assembly - Includes rear cover, cable, input tray, front cover, white scan background, mylar holder assembly, left cover, photo interrepter with conector, PCA motor |
| Q7842-67944 |
ADF Roller Kit - ADF Maintenance Roller Kit CE487A ADF Maintenance Kit Includes ADF Paper Pick-up Roller Assembly & Separation Pad Assembly. Estimated yield 75K pages. |
| RC1-8034-000CN |
Arm - Sensor arm lock - Detects if cartridge is present sensor (SR9) |
| Q7829-60150 |
Belt - Scanner assembly (whole unit) - Include rod, glass guide, rubber guide, paper sensor, rail and slide sheet assembly |
| Q7829-60159 |
Belt - Scanner assembly (whole unit) - Include rod, glass guide, rubber guide, paper sensor, rail and slide sheet assembly |
| Q7829-60185 |
Belt - Scanner assembly (whole unit) - Include rod, glass guide, rubber guide, paper sensor, rail and slide sheet assembly |
| RC1-7249-000CN |
Bushing - Support bushing - Axial support for top sensor flag - Two used |
| RC1-7283-000CN |
Bushing - Bushing - Located on the gear plate next to the cam and the 133-tooth gear |
| RC1-7443-000CN |
Bushing - Bushing - Located between the 25-tooth and 35-tooth gears on the tranfer drive side plate |
| 5851-2501 |
Cable - Hard drive power SATA cable - Provides power to the hard drive connects to the mother board |
| 5851-2502 |
Cable - Hard drive SATA cable - Connects the hard drive with the mother board - Transfer all the data from the printer to the hard drive |
| 5851-2503 |
Cable - Cable fax for HP LaserJet M3035 MFP |
| 8120-8907 |
Cable - Telephone cable (Australian) - 3.0m (9.8ft) long (Gray) - RJ-11 plug on one end, Australian phone plug on other end |
| 8120-8908 |
Cable - Telephone cable (Korea) - 3.0m (9.8ft) long (Gray) - RJ-11 plug on one end, Korea phone plug on other end |
| 8120-8911 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Denmark) |
| 8120-8912 |
Cable - Telephone cable (Germany) - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end, Germany phone plug on other end |
| 8120-8913 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Israel) |
| 8120-8914 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Italy) |
| 8120-8915 |
Cable - Telephone cable (four conductor) - RJ-11 (M) to telephone plug/socket connector - 3m (9.8ft) long (Netherlands) |
| 8120-8918 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Sweden) |
| 8120-8920 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Turkey) |
| 8120-8921 |
Cable - Telephone cable (five conductor) - RJ-11 (M) to BS-601A (M/F) - 3m (9.8ft) long (for the U.K., New Zealand, and Hong Kong) |
| 8120-8922 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 phone plug connectors (Eastern Europe, Czechoslovakia, Slovenia, and Hungary) |
| 8120-8923 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (France, Morocco, and Tunisa) |
| 8121-0811 |
Cable - Telephone cable (2-wire) - RJ11 (M) connectors - 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal, and Spain) |
| 8121-0844 |
Cable - Telephone cable with bill tone filter - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Switzerland) |
| 8121-1042 |
Cable - Telephone cable - 3.0m (9.8ft) long (Gray) - RJ-11 plug on one end (Hong Kong) |
| Q7829-67907 |
Cable - Control board cable - Connects automatic document feeder (ADF) to the scanner |
| Q7829-67946 |
Cable - Replacement - adf scanner cable |
| RK2-1053-000CN |
Cable - Flexible flat cable - 21 pin connector |
| RK2-1055-000CN |
Cable - Flexible flat cable - 23 pin connector |
| RK2-1283-000CN |
Cable - Cable flat, 15p |
| Q7829-60101 |
Cage - Formatter board cage assembly - Metal shield and enclosure for the formatter board |
| RC1-7284-000CN |
Cam - Cam - Located between large white 133 tooth gear and the bushing on the gear cover |
| RC1-7284-020CN |
Cam - Cam - Located between large white 133 tooth gear and the bushing on the gear cover |
| RC1-8038-000CN |
Cam - Cam, pad return, lower |
| RC1-8329-000CN |
Cam - Shutter cam - Located on the lower scanner duct |
| RC1-8332-000CN |
Cam - Slide cam - Located on the lower scanner duct |
| RC1-7141-000CN |
Cap - Cap, paper feed guide |
| J7972G |
Card - Parallel port card - 1284B Parallel card - Compatible operating systems Windows NT 4.0, 98, 2000, Me, XP |
| U2014E |
Care Pack - HP Network Install high-end LaserJet Multifunction printer Service |
| UE670E |
Care Pack - HP 3 year Next business day Onsite LaserJet M5035MFP Hardware Support |
| UE671E |
Care Pack - HP 4 year Next business day Onsite LaserJet M5035MFP Hardware Support |
| UE672E |
Care Pack - HP 5 year Next business day Onsite LaserJet M5035MFP Hardware Support |
| UE673E |
Care Pack - HP 3 year 4 hour response 9x5 Onsite LaserJet M5035MFP Hardware Support |
| UE674E |
Care Pack - HP 4 year 4 hour response 9x5 Onsite LaserJet M5035MFP Hardware Support |
| UE675E |
Care Pack - HP 5 year 4 hour response 9x5 Onsite LaserJet M5035MFP Hardware Support |
| UE676E |
Care Pack - HP 3 year 4 hour response 13x5 Onsite LaserJet M5035MFP Hardware Support |
| UE677E |
Care Pack - HP 4 year 4 hour response 13x5 Onsite LaserJet M5035MFP Hardware Support |
| UE678E |
Care Pack - HP 5 year 4 hour response 13x5 Onsite LaserJet M5035MFP Hardware Support |
| UE679PE |
Care Pack - HP 1 year Post Warranty Next business day Onsite LaserJet M5035MFP Hardware Support |
| UE680PE |
Care Pack - HP 1 year Post Warranty 4 hour response 9x5 Onsite LaserJet M5035MFP Hardware Support |
| UE681PE |
Care Pack - HP 1 year Post Warranty 4 hour response 13x5 Onsite LaserJet M5035MFP Hardware Support |
| UE682E |
Care Pack - HP Maintenance Kit Replacement LaserJet M5025/ 5035MFP Fuser 110 Service |
| UE684E |
Care Pack - HP Maintenance Kit Replacement LaserJet M5025/ 5035MFP Automatic Document Feeder Service |
| UL409E |
Care Pack - HP 3 year Next business day Onsite Defective media retention LaserJet M5035MFP Support |
| UL410PE |
Care Pack - HP 1 year Post Warranty Next business day Onsite Defective media retention LJ M5035MFP Support |
| UL624E |
Care Pack - HP Secure Hard Disk Installation and Startup Service |
| UT814PE |
Care Pack - HP 2 year Post-Warranty Next business day onsite LaserJet M5035 MFP Hardware Support |
| UT979E |
Care Pack - HP 4 year Next business day Onsite + Defective Media Retention LaserJet M5035 MFP Support |
| UU860E |
Care Pack - HP 5 year Next business day Onsite + Defective Media Retention LaserJet M5035 MFP Support |
| UU926PE |
Care Pack - HP 1 year Post Warranty Phone Assist Mid-range Multifunction and High-end LaserJet printer Service |
| C8085-60541 |
Cartridge - Staple cartridge - Contains 5000 staples - For the add-on staple/stacker unit |
| C8091A |
Cartridge - Replacement staple cartridge - Contains 5000 staples |
| Q7570-67901 |
Cartridge - Black toner cartridge with Smart Printing Technology - Prints approximately 15,000 pages per cartridge |
| Q7829-67921 |
Cartridge - Staple cartridge - Contains 5000 staples - For the add-on staple/stacker unit |
| RC1-9917-000CN |
Caster - Stationary rear caster - Mounts on the bottom frame of the 500-sheet high capacity input (HCI) paper feeder assembly |
| RC2-0134-000CN |
Caster - Stationary front caster - Mounts on the bottom frame of the 500-sheet high capacity input (HCI) paper feeder ssembly |
| RC3-2994-000CN |
Caster - Rear Caster - For The 1x500-Sheet Paper Deck Assembly |
| XD9-0233-000CN |
Clip - Retaining E-ring |
| RK2-1281-000CN |
Clutch - Electromagnetic clutch (CL2) |
| RM1-2995-000CN |
Connector - Connecting PCA assembly - Includes IS connecting PCA assembly, formatter guide plate, formatter guide cap plate, flexible flat cable guide, DINN board support, video interface PCA assembly, and screws |
| RM1-2995-010CN |
Connector - Connecting PCA assembly - Includes IS connecting PCA assembly, formatter guide plate, formatter guide cap plate, flexible flat cable guide, DINN board support, video interface PCA assembly, and screws |
| VS1-7258-007CN |
Connector - Drawer connector - Connector located on bottom of tray assembly frame on right side, which connects tray assemblies to each other |
| Q7829-60102 |
Control Panel - Contorl panel assembly - Includes a touchscreen graphical display, job control buttons, a numeric keypad, and three light emitting diode (LED) status lights - Does not include overlay |
| Q7829-60144 |
Cover - Plastic screw covers with an adhesive back - Covers screw heads that secure the plastic scanner top cover - Ten used |
| Q7829-60145 |
Cover - Scanner controller board (SCB) main cover - Protects the scanner board assembly - Located on the top back side of the scanner assembly |
| Q7829-60152 |
Cover - Top cover assembly - Covers the scanner glass assembly - Does not include lift-up door or any other attaching parts |
| Q7829-60153 |
Cover - Right side scanner cover - Located on the right side portion of the top cover |
| Q7829-60154 |
Cover - Bottom cover - Protects the bottom part of the scanner assembly - where the scanner sits on |
| Q7829-67904 |
Cover - ADF rear end cover - Protects the rear side of the ADF - Located on top of the scanner controler bord cover |
| Q7829-67905 |
Cover - ADF front cover - Located on the fornt part of the ADF unit on top of the control panel when the ADF is close |
| Q7829-67906 |
Cover - ADF left cover - Located under the paper jam cover on the left side of the printer |
| Q7829-67910 |
Cover - ADF jam access cover - Located on the left top side of the printer - To remove paper jam from the ADF |
| Q7829-67919 |
Cover - Pick-up roller cover - Plastic cover that protects the paper pick-up roller and separation pad located on the ADF |
| Q7829-67920 |
Cover - Pick-up roller cover - Plastic cover that protects the paper pick-up roller and separation pad located on the ADF |
| RC1-7019-000CN |
Cover - Right upper gear cover - Located next to the right lower cartridge giude |
| RC1-7265-000CN |
Cover - Contact holder cover - Fuser bias contact cover. |
| RC1-8164-000CN |
Cover - Rear gear cover - Protects the rear part of the gear plate |
| RC1-8220-000CN |
Cover - Front cover - Face down paper delivery cover |
| RC1-8221-010CN |
Cover - Front Cover - Plastic cover on top of the paper cassette tray |
| RC1-8222-000CN |
Cover - Rear Cover - Covers the back part of the printer - Located next to the formatter cover |
| RC1-8223-000CN |
Cover - Formatter board cover - Located on the back right side of the printer next to the rear cover |
| RC1-8225-000CN |
Cover - Left rear cover - Rectangle shaped plastic cover located on the left rear side of the printer |
| RC1-8226-000CN |
Cover - Right rear cover - Plastic cover located on the right rear side of the printer next to the right door assembly |
| RC1-8227-000CN |
Cover - Left upper cover - Small rectangular cover - Located on top of the left lower cover |
| RC1-8228-000CN |
Cover - Left lower cover assembly |
| RC1-8231-000CN |
Cover - Face down side cover - Located between the front cover and the inner front cover |
| RC1-8233-000CN |
Cover - Top cover - Attached to the face down top cover |
| RC1-8235-000CN |
Cover - Duplexer blank cover - Located next to the left upper cover |
| RC1-8236-000CN |
Cover - Right grip cover - Rectangle shaped cover with two handles to pull the right door |
| RC2-0151-000CN |
Cover - Rear cover - For the high capacity input (HCI) feeder |
| RC2-0152-000CN |
Cover - Lower right cover - For the hight capacity input (HIC) feeder |
| RC2-0153-000CN |
Cover - Lower left cover - For the hight capacity input (HIC) feeder |
| RC2-0161-000CN |
Cover - Right front cover - For the 500 sheet high capacity input (HCI) tray |
| RC2-0162-000CN |
Cover - Front upper cover - For the 1X500 high capacity input (HCI) tray |
| RC2-0163-000CN |
Cover - Left cover - Plastic cover that protects the left side of the 1x500 high capacity input (HCI) main body |
| RC2-0183-000CN |
Cover - Stock box cover – Plastic frame cover - Located behind the stock door |
| RM1-2987-000CN |
Delivery - Paper delivery assembly |
| RM1-2987-020CN |
Delivery - Paper delivery assembly |
| Q7829-67918 |
Diverter - ADF diverter assembly - Diverts paper to duplexer assembly, face up tray or face down delivery assembly |
| Q7829-67922 |
Door - Stapler/stacker left door |
| RC2-0181-000CN |
Door - Stock door - Front door for the stock box |
| RM1-2984-000CN |
Door - Cartridge door assembly - Provides access to the cartridges. Cart door assy for HP LaserJet Mxxxx mfp |
| RM1-2984-030CN |
Door - Cartridge door assembly - Provides access to the print cartridges |
| RM1-2990-000CN |
Door - Left door assembly - Includes flapper pad, left door, facedown guide, left door handle, compression spring, and screw |
| RM1-2991-000CN |
Door - Right door assembly - For the print engine - Located below the cartridge access door |
| RM1-3825-000CN |
Door - Right door assembly - Located on the 500-sheet high capacity input (HIC) assembly |
| 5851-3833 |
Drive Assembly - 40GB SATA Hard drive - 5,400 RPM, 2.5 inch form factor, 9.5mm height Hard drive kit. For PATA (Parallel ATA) connector order Q7829-67935. |
| J7989G |
Drive Assembly - Hard drive - High performance EIO serial ATA hard drive.EIO hard disk - Can be installed in printers with EIO slots - Provides mass storate capability for downloading fonts and macros - May also hold print jobs. |
| Q7829-67935 |
Drive Assembly - Hard drive kit - 40G hard drive with PATA (Parallel ATA) connector. For SATA (serial hard drive) order 5851-3833. |
| RM1-2962-000CN |
Drive Assembly - Delivery drive assembly |
| RM1-2963-000CN |
Drive Assembly - Fuser drive assembly - Includes the two support plates, drive gears, and motor (M2) |
| RM1-2963-040CN |
Drive Assembly - Fuser/Fixing drive assembly - Includes the two support plates, drive gears, and motor (M2) |
| RM1-2972-000CN |
Drive Assembly - Lower drive assembly - Includes lower drive plate, 43/26 tooth gear, 14/14 tooth gear, and 29 tooth gear |
| RC1-8328-000CN |
Duct - Duct, scanner, lower |
| RC1-8344-000CN |
Duct - Duct, hv upper for HP LaserJet Mxxxx mfp |
| RC1-8345-000CN |
Duct - Duct, hv, lower |
| Q7549-67901 |
Duplexer - LaserJet, printer, and copier series Duplexer assembly, Auto Duplex Unit for double sided printing. |
| Q7549A |
Duplexer - LaserJet, printer, and copier series Duplexer assembly, Auto Duplex Unit for double sided printing. |
| RK2-1284-000CN |
Fan - Rear cooling fan - 2-wire, 92mm x 92mm x 25mm, 12VDC, 0.30A (black) |
| RK2-1285-000CN |
Fan - Front cooling fan - Mounts on the front part of the printer on top of the tray 3 - Does not include housing |
| Q3701-60014 |
Fax Module - Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter boardHP LaserJet analog fax accessory 300 |
| RM1-3009-000CN |
Feeder - Paper feed assembly - Include plate, bushings, covers, springs, static charge eliminator, rollers, transfer insulating sheet,and guide |
| RM1-3815-000CN |
Feeder - 500-sheet paper input feeder/tray assembly high capacity input (HIC) - Complete cassette assembly |
| RC1-7261-000CN |
Flag - Paper sensor flag - Leading edge paper sensor flag |
| Q6007-67951 |
Flash Card - HP 48MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7829-67909 |
Foam - ADF reflector foam - White plastic sheet with foam that reflects the light wile scanning |
| Q7829-67943 |
Foam - ADF reflector foam - White plastic sheet with foam that reflects the light wile scanningADF reflector foam - White plastic sheet with foam that reflects the light wile scanning |
| Q7829-67931 |
Fuser Assembly - Fusing assembly - For 110 VAC - Bonds toner to paper with heat |
| Q7829-67934 |
Fuser Assembly - Fuser Assembly - For 220 VAC - Bonds toner to paper with heat |
| Q7829-67941 |
Fuser Assembly - Fuser Assembly - For 220 VAC - Bonds toner to paper with heat |
| RM1-3007-000CN |
Fuser Assembly - Fuser Assembly - For 110 VAC - Bonds toner to paper with heat |
| RM1-3007-040CN |
Fuser Assembly - Fusing assembly - For 110 VAC - Bonds toner to paper with heat |
| RM1-3008-000CN |
Fuser Assembly - Fuser Assembly - For 220 VAC - Bonds toner to paper with heat |
| RM1-3008-040CN |
Fuser Assembly - Fuser Assembly - For 220 VAC - Bonds toner to paper with heat |
| RU5-0537-000CN |
Gear - 25-tooth gear for HP LaserJet Mxxxx mfp |
| RU5-0538-000CN |
Gear - 35-tooth gear for HP LaserJet Mxxxx mfp |
| RU5-0539-000CN |
Gear - 33-tooth gear for HP LaserJet Mxxxx mfp |
| RU5-0546-000CN |
Gear - Gear - 133-tooth gear - Big gear that is located on the gear plate |
| RU5-0546-020CN |
Gear - 133-tooth gear - Big gear that is located on the gear plate |
| RU5-0547-000CN |
Gear - Gear - 73-tooth gear - Located on the gear plate |
| RU5-0548-000CN |
Gear - Gear - 52/96 tooth gear - Have 52-tooth on the inside and 96-tooth on the outside - Located on the gear plate |
| RU5-0549-000CN |
Gear - Gear - 40/99 tooth gear - Have 40-tooth on the inside and 99-tooth on the outside - Located on the gear plate |
| RU5-0550-000CN |
Gear - Gear - 43-tooth - Located on the gear plate |
| RU5-0551-000CN |
Gear - Gear - 26-tooth gear - Located on the gear plate - Snaps in to the 43-tooth gear |
| RU5-0553-000CN |
Gear - Gear - 15-tooth gear |
| RU5-0564-000CN |
Gear - 14-tooth gear for HP LaserJet Mxxxx mfp |
| Q7829-60143 |
Glass Assembly - Scanner glass assembly - Glass plate on which the documents are placed to be scanned - Mounts in the scanner bezel |
| RC1-7021-000CN |
Ground - Grounding plate - Provides grounding for the photo interrupter |
| Q7829-60157 |
Guide - Scanner glass guide - Rectangle shaped guide that determines the correct position of the scanner glass |
| Q7829-60158 |
Guide - Scanner glass guide - Rectangle shaped guide that determines the correct position of the scanner glass |
| Q7829-60162 |
Guide - Rubber guide - For the scanner glass |
| Q7829-90969 |
Guide - Formatter instruction guide |
| RC1-7121-000CN |
Guide - Cartridge guide - Front left side toner cartridge guide |
| RC1-7286-000CN |
Guide - Cartridge guide - Lower right side toner cartridge guide |
| RC1-7287-000CN |
Guide - Cartridge guide - Upper right side toner cartridge guide |
| RC1-8027-000CN |
Guide - Front duplexer guide - Guide/support for duplexer assembly |
| RC1-8048-000CN |
Guide - Rear guide for the duplexer assembly |
| RC1-8165-000CN |
Guide - Mount, interlock guide |
| 0950-4717 |
Hard Drive - 40GB SATA Hard drive - 5,400 RPM, 2.5 inch form factor, 9.5mm height |
| 5851-3230 |
Hard Drive - Hard drive - For digital sending, copy, and storage |
| 5851-3231 |
Hard Drive - Hard drive kit - 40GB hard drive with both plastic side rails |
| J7989A |
Hard Drive - Hard drive - High performance EIO serial ATA hard drive |
| Q7829-67916 |
Hinge - ADF hinge - For the top cover (document lid) on the scanner (two are required) |
| Q7829-67945 |
Hinge - ADF hinge - For the top cover (document lid) on the scanner (two are required) |
| RC1-7241-000CN |
Holder - Contact holder - Holds fuser bias contacts. |
| RC1-7268-000CN |
Holder - Sensor holder - Media leading edge sensor holder |
| RC1-8026-000CN |
Holder - Spring holder - Hold the compression spring located on the fuser bias |
| RC1-8035-000CN |
Holder - Tray holder - Right front paper cassette holder |
| RC1-8036-000CN |
Holder - Tray holder - Left front paper cassette holder |
| RC2-0167-000CN |
Holder - Holder, drawer for HP LaserJet Mxxxx mfp |
| RM1-2999-000CN |
Holder - Tag holder assembly - Includes connector holder tag, holder plate, compression spring, and memory contact cable |
| Q7829-67936 |
Kit - M5035 hci tray kit |
| Q7832-67901 |
Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| RM1-2555-000CN |
Laser Scanner - Laser/Scanner assembly - Mounts on the support structue in the print engine frame assembly RM1-2557 |
| RM1-2555-020CN |
Laser Scanner - Laser/Scanner assembly - Mounts on the support structue in the print engine frame assembly RM1-2557 |
| RC1-7285-000CN |
Lever - Coupling lever - Lever arm that couples the drive gear to the toner cartridge. |
| RC1-7451-000CN |
Lever - Shutter lever - Connects to laser shutter |
| RC1-8032-000CN |
Lever - Lever, fixing shutter |
| RC1-8075-000CN |
Lever - Lever, drive release |
| RC1-8330-000CN |
Lever - Pushing lever - Located on the lower scanner duct |
| RM1-2969-000CN |
Lifter - Lifter drive assembly - Includes photosensor, grounding plate, push switch, front gear box, rear gear box, gears, springs, E-ring, lifter plate, input gear shaft, cassette size cable, and screws |
| RM1-3819-000CN |
Lifter - Lifter drive assembly - Provides lift support for high capacity input paper tray |
| RC1-7289-000CN |
Link - Tag link - This is an arm extension for a mechanical movement - It allows the printer to read the toner cartridge supplies status |
| RC2-0160-000CN |
Link - Right link door - Right side link for the stock door |
| RC2-0170-000CN |
Link - Right link door - Upper right side link for the 1x500 high capacity input (HIC) door assembly |
| Q7829-67937 |
Lock - Scanner lock for HP CE966A |
| RC1-8039-000CN |
Lock - Front pressure release lock |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832A |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation |
| Q7833-67901 |
Maintenance Kit - Maintenance kit (220 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 220 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7833A |
Maintenance Kit - Maintenance kit (220 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 220 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7842-67902 |
Maintenance Kit - ADF MAINTENANCE KIT ADF maintenance kit - Includes the ADF paper pickup roller assembly and the separation pad assembly |
| Q7842A |
Maintenance Kit - ADF maintenance kit - Includes the ADF paper pickup roller assembly and the separation pad assembly |
| Q7713-67951 |
Memory - HP 32MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7714-67951 |
Memory - 48MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7715-67951 |
Memory - 64MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7718-67951 |
Memory - 128MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7718A |
Memory - 128MB, 100-pin, DDR DIMM |
| Q7719-67951 |
Memory - 256MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7719A |
Memory - 256MB, 100-pin, DDR DIMM |
| Q7720-67951 |
Memory - 512MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7829-60149 |
Motor - Transmission motor assembly - Located on the transmission drive assembly - Makes the gear move the timing belt |
| RK2-1331-000CN |
Motor - Stepping motor - Main drive motor for the printer - Motor M1 |
| RM1-2516-000CN |
Motor - Main motor - Drives gears in main drive assembly (motor unit). |
| RM1-2538-000CN |
Motor - Fusing assembly drive motor |
| Q7829-60166 |
Optical Unit - Scanner optical carriage assembly - Includes the optical scanner and light mounted on a carriage assembly - Passes under the document during the flatbed scanning operation - Mounts inside the flatbed scanner assembly |
| Q7829-60110 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (English) |
| Q7829-60111 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (French) |
| Q7829-60112 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Italian) |
| Q7829-60113 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Dutch) |
| Q7829-60114 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Spanish) |
| Q7829-60115 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (for use in the Netherlands) |
| Q7829-60116 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Portuguese) |
| Q7829-60117 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Norwegian) |
| Q7829-60118 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Swedish) |
| Q7829-60119 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Finland) |
| Q7829-60120 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Danish) |
| Q7829-60121 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Polish) |
| Q7829-60122 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Russian) |
| Q7829-60123 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Czech) |
| Q7829-60124 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Hungarian) |
| Q7829-60125 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Chinese/Twi) |
| Q7829-60126 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Chinese) |
| Q7829-60127 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Korean) |
| Q7829-60128 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Japanese) |
| Q7829-60129 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Turkish) |
| Q7829-60130 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Hebrew) |
| Q7829-60131 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Greek) |
| Q7829-60132 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Arabic) |
| Q7829-60133 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Thai) |
| Q7829-60134 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Romanian) |
| Q7829-60135 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Slovakian) |
| Q7829-60136 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Slovenian) |
| Q7829-60137 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Croatian) |
| Q7829-60176 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Chinese) |
| Q7829-67927 |
Pad - Separation pad for multipurpose tray/tray 1 assembly |
| RC1-7122-000CN |
Pad - Paddle for HP LaserJet Mxxxx mfp |
| RM1-2462-000CN |
Pad - Mp pad assembly Separation pad for multipurpose tray/tray 1 assembly |
| Q3701-60010 |
PC Board - Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter boardHP LaserJet analog fax accessory 300 |
| Q3701-60012 |
PC Board - Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter boardHP LaserJet analog fax accessory 300 |
| Q3701-60020 |
PC Board - Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter boardHP LaserJet analog fax accessory 300 |
| Q3701-60021 |
PC Board - Modem PCA - HP LaserJet analog fax accessory 300 |
| Q3701A |
PC Board - Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter boardHP LaserJet analog fax accessory 300 |
| Q7565-67902 |
PC Board - Lj 5035 formatter kit Formatter (main logic) PC board - For HP LaserJet M5025/M5035 series only |
| Q7565-67905 |
PC Board - Formatter (main logic) board - For HP LaserJet M5025/M5035 series only |
| Q7565-67906 |
PC Board - Formatter (main logic) board - For HP LaserJet M5025/M5035 series only |
| Q7565-67908 |
PC Board - Formatter (Main Logic) board Formatter (main logic) PC board - For HP LaserJet M5025/M5035 series only |
| Q7565-67909 |
PC Board - Formatter (main logic) board - For HP LaserJet M5025/M5035 series |
| Q7565-67910 |
PC Board - Formatter (main logic) PC board - For HP LaserJet M5025/M5035 series only |
| Q7565-67913 |
PC Board - Formatter (main logic) PC board - For HP LaserJet M5025/M5035 series only |
| Q7829-40001 |
PC Board - Fax card cradle (Black) - Holds the fax card in a specific position on the mother board |
| Q7829-60165 |
PC Board - Scanner controller board assembly (SCB) (main baord) - Provides timing and control for the flatbed scanner |
| Q7829-60183 |
PC Board - Scanner controller board assembly (SCB) (main baord) - Provides timing and control for the flatbed scanner |
| Q7829-67903 |
PC Board - PCA motor assembly ADF |
| Q7829-67942 |
PC Board - PCA motor assembly ADF |
| Q7841-60001 |
PC Board - Hewlett Packard copier HP ADF MOTOR PCA board unit. |
| RM1-2957-020CN |
PC Board - High voltage power supply PC board - 110-127VAC input voltage |
| RM1-3459-010CN |
PC Board - DC controller board - DC Controller for LaserJet M5025/M5035 series |
| RM1-3459-030CN |
PC Board - DC controller board - DC Controller for LaserJet M5025/M5035 series |
| RM1-3641-000CN |
PC Board - Paper feed printed circuit assembly (PCA) - Located on the rear part of the high capacity input (HCI) feeder main body |
| RM1-3641-030CN |
PC Board - Paper feed PCA assembly - Located on the rear part of the high capacity input (HCI) feeder main body |
| J6035D |
PC Board Interface - HP JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port |
| J6035G |
PC Board Interface - JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port |
| J7934G |
PC Board Interface - HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM |
| J7942A |
PC Board Interface - HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module |
| J7942G |
PC Board Interface - HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module |
| J7951G |
PC Board Interface - HP Jetdirect ew2400 802.11g wireless print server module - Includes power supply, USB cable, LAN/Ethernet cable, setup documentation and software |
| J7960G |
PC Board Interface - HP Jetdirect 625n internal ethernet print server - Provides 10BaseT, 100BaseTX, or 1000BaseT interface for products with an EIO port |
| J7961G |
PC Board Interface - HP Jetdirect 635n IPv6/IPsec Print Server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM;Click to order the functional equivalent: J7961-69011 |
| RM1-2976-000CN |
Pickup Assembly - Upper cassette paper pickup assembly |
| RM1-2977-000CN |
Pickup Assembly - Lower cassette paper pickup assembly |
| RM1-3821-000CN |
Pickup Assembly - Paper pick-up assembly - For the 500-sheet paper hight capacity input (HIC) tray |
| RM1-3821-010CN |
Pickup Assembly - Paper Pick-Up Assy |
| RC1-7129-000CN |
Plate - Transfer drive side plate - Plate that holds the 33-tooth gear, 35-tooth gear, 25-tooth gear, and the bushing |
| RC1-7264-000CN |
Plate - Cross member auxiliary plate |
| RC1-8069-000CN |
Plate - Plate, scanner duct |
| RL1-0951-000CN |
Plate - Gear support plate - Holds 133-tooth gear, 73-tooth gear, 96/52-tooth gear, 99/40-tooth gear, 43-tooth gear, and 26-tooth gear |
| 8121-0564 |
Power Cord - Power cord (Black) - 2.0m (6.6ft) long - Has straight (F) C13 receptacle (For 240V in India) |
| 8121-0729 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220V in Argentina) |
| 8121-0731 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (75in) long - Has straight (F) C13 receptacle (For 220V in Europe)Limited supply only. |
| 8121-0733 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220VAC in Denmark) |
| 8121-0734 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 220V in Brazil and Thailand) |
| 8121-0735 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220V in Chile) |
| 8121-0736 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (75in) long - Has straight (F) C13 receptacle (For 100V in Japan) |
| 8121-0737 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 240VAC in India and South Africa) |
| 8121-0738 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220VAC in Switzerland) |
| 8121-0739 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 240V in Singapore, Hong Kong and the U.K.) |
| 8121-0740 |
Power Cord - Power cord (Black) - 3-wire, 18 AWG, 1.9m (75in) long - Has straight (F) C13 receptacle (for 120V in the USA, Canada, Mexico, and Taiwan) |
| 8121-0964 |
Power Cord - Power cord (Black) - 16 AWG (1.25 sq.mm.), 1.9m (6.2ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, and Thailand) |
| 8121-1004 |
Power Cord - Power cord (Flint Gray) - Three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220VAC in Israel) |
| RM1-2957-000CN |
Power Supply - High voltage pcb 110v |
| RM1-2957-010CN |
Power Supply - High voltage power supply PC board - 110-127VAC input voltage |
| RM1-2958-000CN |
Power Supply - High voltage pcb 220v |
| RM1-2958-010CN |
Power Supply - High voltage power supply PC Board - 220/240VAC input voltage |
| RM1-2958-020CN |
Power Supply - High voltage power supply PCA assembly - For 220/240 VAC input voltage |
| RM1-2994-000CN |
Power Supply - Power supply PC board assembly - 110û127 VAC input voltage |
| RM1-2994-040CN |
Power Supply - Power supply PC board assembly - 110–127 VAC input voltage |
| RM1-3006-000CN |
Power Supply - Power supply PC board assembly - 220û240 VAC input voltage |
| RM1-3006-040CN |
Power Supply - Power supply PC board assembly - For 220/240 VAC input voltage |
| Q7829-67932 |
Pressure Assembly - Fuser pressure release assembly |
| RM1-2973-000CN |
Pressure Assembly - Fuser pressure release assembly - Includes pressure release frame, front and rear fixed plate, front and rear cam, front and rear arm, front and rear lever, springs, intermediate guide assembly, screws, pressure release shaft, shaft lock and roller |
| Q7829-60151 |
Pulley - Pulley assembly - For transmission timing belt |
| Q7829-60164 |
Rail - Rail and slide sheet assembly |
| RC1-9231-000CN |
Rail - Roller rail - Attaches to the left cassette rail |
| RL1-1390-000CN |
Rail - Right rail - Rail that the cassette tray mounts to - Located on the 1x500 high capacity input (HCI) |
| RL1-1391-000CN |
Rail - Left rail - Rail that the cassette tray mounts to - Located on the 1x500 high capacity input (HCI |
| RM1-2970-000CN |
Rail - Cassette support rail assembly - Left side tray 2 support rail assembly |
| RM1-2971-000CN |
Rail - Cassette support rail assembly - Right side tray 2 support rail assembly |
| Q7830A-Repair_LaserJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| RC1-8358-000CN |
Ring - E-ring type for HP LaserJet Mxxxx mfp |
| Q7829-60160 |
Rod - Scanner slider rod - Scanner module moves along this rod |
| Q7829-67924 |
Roller - Pickup roller high capacity input (HCI) - Attached to the pickup arm - Presses down the paper stack surface to feed the paper one sheet at a time (white) |
| Q7829-67925 |
Roller - Feed roller high capacity input (HCI) - Transmit the paper from the cassette and feeds it to the device entrance (blue) |
| Q7829-67926 |
Roller - Paper pickup roller - MP/Tray 1 paper pickup roller |
| Q7829-67928 |
Roller - Transfer roller assembly - Long metal shaft with Black roller and drive gear - Transfers static charge to the media being printed on |
| Q7829-67929 |
Roller - Feed/separation roller - Has a blue gear on one end and blue release tab on the other - For tray 2 or tray 3 |
| Q7829-67930 |
Roller - Pickup roller assembly - Picks paper from paper input tray - For tray 2 or tray 3 |
| RL1-0915-000CN |
Roller - Paper pickup roller - MP/Tray 1 paper pickup roller |
| RL1-1206-000CN |
Roller - Pickup roller high capacity input (HCI) - Attached to the pickup arm - Presses down the paper stack surface to feed the paper one sheet at a time (white) |
| RM1-0037-020CN |
Roller - Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder |
| RM1-2485-000CN |
Roller - Transfer roller assembly - Long metal shaft with Black roller and drive gear - Transfers static charge to the media being printed on |
| RM1-2485-020CN |
Roller - Transfer roller - Transfer charge roller (Black) |
| RM1-2983-000CN |
Roller - Separation block assembly - Includes separation roller assembly, springs, E-rings, separation block shaft, separation block roller, separation block holder, separation roller base, and separation roller block cover |
| RM1-2998-000CN |
Roller - Paper pickup roller assembly - For the lower cassette pickup assembly |
| RM1-3001-000CN |
Roller - Registration roller assembly - Includes the roller, bushings, mounting plate, transfer upper guide, left and right registration side plate, registration roller shaft, and upper transfer sheet guide |
| 0515-4318 |
Screw - Stabilizing screw for the 2,000-sheet feeder - Mounts on right side of the 2,000-sheet paper feeder assembly (two used) |
| 0515-4679 |
Screw - M3 pan-head phillips screw with washer - 6mm long |
| Q7829-60148 |
Sensor - Scanner lid sensor assembly |
| Q7829-60163 |
Sensor - Paper sensor - Paper present sensing |
| Q7829-67913 |
Sensor - Adf flag sensor ls |
| Q7829-67914 |
Sensor - ADF photo interrupter sensor with connector |
| RC1-7144-000CN |
Sensor - Loop sensor flag - Tracks the paper tension during its movement in the paper path of the printer |
| RC1-8058-000CN |
Sensor - Link, fixing sensing |
| RC1-8059-000CN |
Sensor - Link, fixing sensing |
| RM1-2968-000CN |
Sensor - Back end sensor assembly - Includes block sensor, grounding spring, and push switch |
| WG8-5624-000CN |
Sensor - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated |
| WG8-5696-000CN |
Sensor - Photo-interrupter sensor assembly (Does not include the sensor flag) |
| WG8-5849-000CN |
Sensor - Duplex re-pick sensor - Detects the leading edge of the page |
| Q7829-67911 |
Separator - Separation floor assembly for the ADF - Includes right and left separation mylar, and separation spring |
| Q7830A-Manual_Laser |
Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. |
| RM1-3459-000CN |
Service Parts - DC controller PCA assembly - For LaserJet M5025/M5035 series |
| RC1-7163-000CN |
Shutter - Fusing shutter - Fuser shutter door - Closes when cartridge access door is opened |
| RC1-7436-000CN |
Shutter - Shaft, fixing shutter |
| RC1-8331-000CN |
Spacer - Slide spacer - Located between the pushing lever and the slide cam on the lower scanner duct |
| RC1-8333-000CN |
Spacer - Spacer ring - Located on the lower scanner duct |
| RC1-7123-000CN |
Spring - Torsion spring - Located on the left cartrige guide - Spring that is used for the movement of the left cartridge guide |
| RC1-7124-000CN |
Spring - Grounding spring - Used inside the print engine |
| RC1-7125-000CN |
Spring - Torsion spring - Provides torsion to the paddle of the left cartridge guide |
| RC1-7126-000CN |
Spring - Compression spring - Used in the side plate inside the print engine |
| RC1-7126-020CN |
Spring - Compression spring - Used in the side plate inside the print engine |
| RC1-7127-000CN |
Spring - Compression spring - Fuser bias contact for fuser grounding |
| RC1-7127-010CN |
Spring - Spring Compression |
| RC1-7145-000CN |
Spring - Torsion spring - Provides radial tension for loop sensor flag located on the high voltage power supply |
| RC1-8052-000CN |
Spring - Grounding spring - Located on the rear guide assembly |
| RC1-8078-000CN |
Spring - Torsion spring - Located on the fuser sensor link |
| RC1-8334-000CN |
Spring - Torsion spring - Located on the shutter cam - Provides torsion to the slide cam |
| RC1-8335-000CN |
Spring - Torsion spring - Located on the lower scanner duct |
| RU5-2548-000CN |
Spring - Tension spring - Provides tension for MP/Tray 1 separation pad assembly |
| RU5-2553-000CN |
Spring - Compression spring - Provides pressure for MP/Tray 1 separation pad assembly |
| RU5-2575-000CN |
Spring - Tension spring - Provides tension to the paddle - Located on left cartridge guide |
| RU5-2587-000CN |
Spring - Compression spring - Electrical contact spring for toner cartridge |
| RU5-2588-000CN |
Spring - Compression spring - Electrical contact spring for toner cartridge |
| RU5-2589-000CN |
Spring - Compression spring - Electrical contact spring for toner cartridge |
| RU5-2590-000CN |
Spring - Compression spring - Located next to the arm lock |
| RU5-2591-000CN |
Spring - Tension spring - Provides tension for fuser release lever |
| RU5-2596-000CN |
Spring - Torsion spring - Provides tension for top sensor flag |
| RU5-2630-000CN |
Spring - Compression spring - Provides pressure for gear pack at lever arm that couples the drive gear to the toner cartridge |
| RU5-2631-000CN |
Spring - Compression spring - Located on the gear plate at the end of the 43-tooth gear |
| RU5-2632-000CN |
Spring - Tension spring - Provides tension for lever arm that couples the drive gear to the toner cartridge |
| RU5-2633-000CN |
Spring - Compression spring - Provides pressure for tag link |
| RU5-2651-000CN |
Spring - Tension spring - Provides tension for shutter lever |
| RU5-2660-000CN |
Spring - Tension spring - Provides tension to the fuser release drive link - Located next to the cartridge door stopper guide |
| RU5-2663-000CN |
Spring - Tension spring - Provides tension to the fuser shutter lever |
| RU5-2683-000CN |
Spring - Compression spring - Located on the fuser sensing link |
| Q7604-67901 |
Stacker Assembly - 500 sheet stapler stacker paper assembly |
| RC1-3090-000CN |
Stop - Bushing stop - For the fuser lever - Located on the inside upper front part of the printer - Two used |
| RC1-7288-000CN |
Stop - Link stopper - Stop for lever arm that couples the drive gear to the toner cartridge |
| RC1-8021-000CN |
Stop - Cartridge door stopper - Provided a predetermined position for the cartridge door when is open |
| RC1-8022-000CN |
Stop - Cartridge door stopper - Provided a predetermined position for the cartridge door when is open |
| RC1-9882-000CN |
Stop - Stopper, right door |
| RC2-0169-000CN |
Stop - Upper right door link stopper |
| RC1-8060-000CN |
Switch - Lvr, fixing sens switch |
| RM1-3471-000CN |
Switch - Door switch - Indicates when toner cartridge door is open |
| RM1-3474-000CN |
Switch - Door switch - Indicates when fuser door is open |
| WC2-5512-000CN |
Switch - Door open detection switch (SW103) |
| Q7834A |
Tray - HP LaserJet MFP 1x500 Sheet Tray with integrated stand |
| Q7835A |
Tray - HP LaserJet MFP 3x500 Sheet Tray with cabinet |
| RC1-8137-000CN |
Tray - Tray - Goes between the face down delivery cover and the top cover |
| RM1-2978-000CN |
Tray - 250-sheet upper paper cassette tray 2 assembly |
| RM1-2979-000CN |
Tray - 250-sheet lower paper cassette tray 3 assembly |
| RM1-3815-060CN |
Tray - 500-sheet paper input feeder/tray assembly high capacity input (HIC) - Complete cassette assembly |
| Q7829-67912 |
Tray Assembly - ADF input paper tray assembly - Includes the adjustable width |
| RM1-3815-080CN |
Tray Assembly - 500-sheet paper input feeder/tray assembly high capacity input (HIC) - Complete cassette assembly |
Techical Help
View service parts