HP printer parts available for
C8942A HP DeskJet 656C Printer
|
| C8942-ABSORBER |
ABSORBER - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters. -
C8942-ABSORBER |
| C8942-AC_ADAPTER |
AC_ADAPTER - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached. -
C8942-AC_ADAPTER |
| C8942-ACTUATOR |
ACTUATOR - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm). -
C8942-ACTUATOR |
| C8942-ARM_DELIVERY |
ARM_DELIVERY - Paper sensing arm - for 'paper out' or delivering paper sensing arm -
C8942-ARM_DELIVERY |
| C8942-ARM_DOOR |
ARM_DOOR - Carriage access door sensor arm -
C8942-ARM_DOOR |
| C8942-ARM_PICKUP |
ARM_PICK_UP - Paper detection arm - for registration plate on picking up paper -
C8942-ARM_PICKUP |
| C8942-ARM_PLATE |
ARM_PLATE - Lever arm - used to lift the pressure plate lifter -
C8942-ARM_PLATE |
| C8942-ARM_SENSING |
ARM_SENSING - Arm assembly senses paper in bottom tray -
C8942-ARM_SENSING |
| C8942-ARM_TENSION |
ARM_TENSION - Tension arm - maintains tension on carriage belt -
C8942-ARM_TENSION |
| C8942-BATTERY |
BATTERY - Battery pack for hp printer -
C8942-BATTERY |
| C8942-BELT_CARRIAGE |
BELT_CARRIAGE - Carriage belt - moves the carriage assembly across the carriage rod -
C8942-BELT_CARRIAGE |
| C8942-BELT_DUPLEX |
BELT_DUPLEX - Duplex timing belt - small belt that goes on the duplexer unit -
C8942-BELT_DUPLEX |
| C8942-BELT_PAPER |
BELT_PAPER - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly. -
C8942-BELT_PAPER |
| C8942-BEZEL |
BEZEL - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel -
C8942-BEZEL |
| C8942-BRACKET_LEFT |
BRACKET_LEFT - Left bracket - carriage rod adjustment bracket (left) -
C8942-BRACKET_LEFT |
| C8942-BRACKET_RIGHT |
BRACKET_RIGHT - Right bracket - carriage rod adjustment bracket (right) -
C8942-BRACKET_RIGHT |
| C8942-BRACKET_TENSION |
BRACKET_TENSION - Belt tension bracket - holds the carriage belt idler pulley -
C8942-BRACKET_TENSION |
| C8942-CABLE_CARRIAGE |
CABLE_CARRIAGE - Cable assembly which connects the main logic board to the carriage motor -
C8942-CABLE_CARRIAGE |
| C8942-CABLE_INTERFACE |
CABLE_INTERFACE - Parallel cable - connects from your printer to computer via your parallel port. -
C8942-CABLE_INTERFACE |
| C8942-CABLE_MCHNSM |
CABLE_MECHANISM - Cable assembly which connects the main logic board to the print mechanism -
C8942-CABLE_MCHNSM |
| C8942-CABLE_PANEL |
CABLE_PANEL - Control panel assembly - includes ribbon cable, this is the calbe that connects to the control panel or display. -
C8942-CABLE_PANEL |
| C8942-CABLE_USB |
CABLE_USB - This interface calbe is the standard 2.0 usb cable that connects to your printer and computer for printing. -
C8942-CABLE_USB |
| C8942-CAM |
CAM - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position -
C8942-CAM |
| C8942-CAP_LIFTER |
CAP_LIFTER - These lifter caps hold the pressure plate lifter and the kicker spring in place. -
C8942-CAP_LIFTER |
| C8942-CARRIAGE_ASSY |
CARRIAGE_ASSEMBLY - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider. -
C8942-CARRIAGE_ASSY |
| C8942-CARRIAGE_BASE |
CARRIAGE_BASE - Carriage base or pre-loader assembly - mounted to bottom of carriage base -
C8942-CARRIAGE_BASE |
| C8942-CARRIAGE_BELT |
CARRIAGE_BELT - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting. -
C8942-CARRIAGE_BELT |
| C8942-CARRIAGE_CABLE |
CARRIAGE_CABLE - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side). -
C8942-CARRIAGE_CABLE |
| C8942-CARRIAGE_LATCH |
CARRIAGE_LATCH - A-arm latch - retains latch over the printheads on the carriage -
C8942-CARRIAGE_LATCH |
| C8942-CARRIAGE_LATCH_CVR |
CARRIAGE_LATCH_COVER - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle. -
C8942-CARRIAGE_LATCH_CVR |
| C8942-CARRIAGE_MOTOR |
CARRIAGE_MOTOR - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement. -
C8942-CARRIAGE_MOTOR |
| C8942-CARRIAGE_ONLY |
CARRIAGE_ONLY - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly). -
C8942-CARRIAGE_ONLY |
| C8942-CARRIAGE_PC_BRD |
CARRIAGE_PC_BOARD - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it. -
C8942-CARRIAGE_PC_BRD |
| 51649A |
CARTRIDGE - HP Ink Crtg 49A Large Color NAM -
51649A |
| 51649NE |
CARTRIDGE - No. 49 tri-color InkJet print cartridge - 11ml (Europe) -
51649NE |
| C1816A |
CARTRIDGE - HP Ink Photo Crtg 16A Color NAM -
C1816A |
| C1816AE |
CARTRIDGE - HP Ink Photo Crtg 16A Color EUR -
C1816AE |
| C6614AN |
CARTRIDGE - No. 20 Black (Regular) ink print cartridge (for North -
C6614AN |
| C6614DN |
CARTRIDGE - HP 20 Large Black Ink Cartridge - Yields approximately 500 pages (North America) -
C6614DN |
| C6614NE |
CARTRIDGE - No. 20 black inJet print cartridge - 14ml (Europe) -
C6614NE |
| C8942-CHASSIS |
CHASSIS - Chassis assembly - the large plastic item that forms the base of the print mechanism -
C8942-CHASSIS |
| C8942-CLUTCH_FEED |
CLUTCH_FEED - Clutch unit resposible for unit picking up paper from the pick up unit. -
C8942-CLUTCH_FEED |
| C8942-CONTROL_PANEL |
CONTROL_PANEL - Control panel assembly - control buttons and display on top front of the unit. -
C8942-CONTROL_PANEL |
| C8942-COVER_BACK |
COVER_BACK - Back cover of printer, it is usually removed to clear paper jams. -
C8942-COVER_BACK |
| C8942-COVER_CARTRIDGE |
COVER_CARTRIDGE - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves. -
C8942-COVER_CARTRIDGE |
| C8942-COVER_MAIN |
COVER_MAIN - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off. -
C8942-COVER_MAIN |
| C8942-DEFLECTOR |
DEFLECTOR - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly -
C8942-DEFLECTOR |
| C8942A |
DESKJET - DeskJet 656C Printer -
C8942A |
| C8942-DISPLAY |
DISPLAY - Status led display (LCD display assembly). -
C8942-DISPLAY |
| C8942-DOOR_CARRIAGE |
DOOR_CARRIAGE - Main front access door - covers the top of the printer and provide access to the carriage when open. -
C8942-DOOR_CARRIAGE |
| C8942-DOOR_CARTRIDGE |
DOOR_CARTRIDGE - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door. -
C8942-DOOR_CARTRIDGE |
| C8942-DOOR_REAR |
DOOR_REAR - Rear cleanout door assembly - rear paper jam clean out door assembly. -
C8942-DOOR_REAR |
| C8942-DRIVE_ASSY |
DRIVE_ASSEMBLY - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring. -
C8942-DRIVE_ASSY |
| C8942-DUPLEXER |
DUPLEXER - Auto duplexer assembly - provides double sided printing capability -
C8942-DUPLEXER |
| C8942-ENCODER |
ENCODER - Encoder spring - provides tension for encoder strip -
C8942-ENCODER |
| C8942-ENCODER_DISK |
ENCODER_DISK - Disk encoder - helps to provide position information of the paper -
C8942-ENCODER_DISK |
| C8942-ENCODER_STRIP |
ENCODER_STRIP - Encoder strip - carriage position sensor reference -
C8942-ENCODER_STRIP |
| C8942-EXTENDER_INPUT |
EXTENDER_INPUT - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths -
C8942-EXTENDER_INPUT |
| C8942-EXTENDER_OUTPUT |
EXTENDER_OUTPUT - Paper exit tray extension -
C8942-EXTENDER_OUTPUT |
| C8942-FAN_PC_BRD |
FAN_PC_BOARD - Fan to cool power supply unit -
C8942-FAN_PC_BRD |
| C8942-FAN_VACCUM |
FAN_VACCUM - Vacuum fan assembly -
C8942-FAN_VACCUM |
| C8942-FEED_ROLLERS |
FEED_ROLLERS - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk -
C8942-FEED_ROLLERS |
| C8942-FLAG_PAPER |
FLAG_PAPER - OOPS flag - out of paper sensor -
C8942-FLAG_PAPER |
| C8942-FORMATTER |
FORMATTER - Formatter board assembly -
C8942-FORMATTER |
| C8942-FRONT_PANEL |
FRONT_PANEL - Front panel assembly - includes lcd and actuator buttons -
C8942-FRONT_PANEL |
| C8942-GEAR_ASSY |
GEAR_ASSEMBLY - ADF gear assembly driven by ADF main motor -
C8942-GEAR_ASSY |
| C8942-GEAR_CLUSTER |
GEAR_CLUSTER - Cluster gear, large gear on service station -
C8942-GEAR_CLUSTER |
| C8942-GEAR_DOUBLE |
GEAR_DOUBLE - Transfer gear - has double gear attached on service station -
C8942-GEAR_DOUBLE |
| C8942-GEAR_MAIN |
GEAR_MAIN - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller. -
C8942-GEAR_MAIN |
| C8942-GEAR_STATION |
GEAR_STATION - Gears on shaft of spittoon station -
C8942-GEAR_STATION |
| C8942-GUIDE_PAPER |
GUIDE_PAPER - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken -
C8942-GUIDE_PAPER |
| C8942-HOLDER |
HOLDER - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place. -
C8942-HOLDER |
| C8942-IDLER |
IDLER - Scanner belt idler assembly - maintains scannter belt tension. -
C8942-IDLER |
| C8942-INK_DLVRY |
INK_DELIVERY_SYSTEM - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly -
C8942-INK_DLVRY |
| C8942-INK_SUPPLY_STATION |
INK_SUPPLY_STATION - Ink supply service station (iss) assembly -
C8942-INK_SUPPLY_STATION |
| C8942-MOTOR_CARRIAGE |
MOTOR_CARRIAGE - Carriage motor - motor that drives the carriage assembly -
C8942-MOTOR_CARRIAGE |
| C8942-MTR_SRVCE_STATION |
MOTOR_SERVICE_STATION - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly -
C8942-MTR_SRVCE_STATION |
| C8942-OVERLAY |
OVERLAY - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately. -
C8942-OVERLAY |
| C8942-PAD_TRAY |
PAD_TRAY - Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing -
C8942-PAD_TRAY |
| 51634Y |
PAPER - Media for HP Q5761A -
51634Y |
| 51634Z |
PAPER - InkJet non-glossy LX paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package -
51634Z |
| C1812A |
PAPER - Greeting card paper pack (White) - A size (8.5 x 11-inches) - Includes 20 sheets and 20 envelopes -
C1812A |
| C1820A |
PAPER - Media for HP C5894A -
C1820A |
| C1821A |
PAPER - Media for HP C8136A -
C1821A |
| C1824A |
PAPER - Media for HP C5894A -
C1824A |
| C1825A |
PAPER - Media for HP C8136A -
C1825A |
| C1853A |
PAPER - Media for HP C8127A -
C1853A |
| C3833A |
PAPER - Premium Glossy InkJet Paper - A size (8.5 x 11-inches) - 10 sheets -
C3833A |
| C5977B |
PAPER - Media for HP C6465A -
C5977B |
| C6039A |
PAPER - Premium Photo Paper (Glossy) - A size (8.5 x 11-inches) - 15 sheets -
C6039A |
| C6044A |
PAPER - HP Photo Greeting Cards (Glossy) - A size (8.5 x 11-inches) - 10 scored half-fold glossy cards and envelopes -
C6044A |
| C6945A |
PAPER - Premium Plus glossy InkJet photographic paper - 10.0cm (3.9in) x 15.0cm (5.9in) - 20 sheets per package -
C6945A |
| Q1787A |
PAPER - Media for HP Q3399A -
Q1787A |
| Q1788A |
PAPER - Media for HP Q6352A -
Q1788A |
| C8942-PC_BRD |
PC_BOARD - Ink cartridge carriage assembly pc board - includes carriage pc board only -
C8942-PC_BRD |
| C8942-PC_BRD_DC |
PC_BOARD_DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board. -
C8942-PC_BRD_DC |
| C8942-PC_BRD_INTERFACE |
PC_BOARD_INTERFACE - Internal print server lan interface board - plugs into peripheral eio. usefull for networking and multiple users. -
C8942-PC_BRD_INTERFACE |
| C8942-PINCHWHEEL |
PINCHWHEEL - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs - -
C8942-PINCHWHEEL |
| 8120-6312 |
POWER_CORD - Power cord (Black) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in Australia, Argentina, New Zealand, and China) -
8120-6312 |
| 8120-6313 |
POWER_CORD - Power cord (black) - 2-wire, 18 awg, 1.8m (6.0ft) long - has straight (f) c7 receptacle (for 120v in usa, canada, mexico, latin america, and taiwan) -
8120-6313 |
| 8120-6314 |
POWER_CORD - Power cord (Black) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in South America, Switzerland, Denmark, Netherlands, and France) -
8120-6314 |
| 8120-6315 |
POWER_CORD - Power cord (Black) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in the United Kingdom and Singapore) -
8120-6315 |
| 8120-6316 |
POWER_CORD - Power cord (Black) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 100V in Japan) -
8120-6316 |
| 8120-6317 |
POWER_CORD - Power cord (Black) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in South Africa, India, and Saudi Arabia) -
8120-6317 |
| 8120-8373 |
POWER_CORD - Power cord (Black) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in China) -
8120-8373 |
| 8120-8441 |
POWER_CORD - Power cord (Black) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in Korea) -
8120-8441 |
| 8120-8699 |
POWER_CORD - Power cord (Black) - 2-wire, 17 AWG, 1.8m (6.0ft) long - Has EPSR symbol molded into plug and straight (F) C7 receptacle (for 240V in Hong Kong) -
8120-8699 |
| 8121-0702 |
POWER_CORD - Power cord (Black, Volex Z730966) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in India) -
8121-0702 |
| C8942-POWER_CORD |
POWER_CORD - Power module power cord- wall outlet cable to power module only. does not include power module. -
C8942-POWER_CORD |
| 0950-3490 |
POWER_MODULE - Power supply module (Yokogawa AT7001A) - 100-240VAC input, 50/60Hz, 400mA - 24VDC output, 500mA - Requires separate AC power cord - Not for use in Korea -
0950-3490 |
| C8942-POWER_MDLE |
POWER_MODULE - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord -
C8942-POWER_MDLE |
| C8942-POWER_MDLE_ASSY |
POWER_MODULE_ASSY - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord -
C8942-POWER_MDLE_ASSY |
| C8942-POWER_SUPPLY |
POWER_SUPPLY - Power supply board (internal pwr supply unit in the office machine). -
C8942-POWER_SUPPLY |
| C8942-POWER_SUPPLY_BRD |
POWER_SUPPLY_BOARD - High voltage power supply board -
C8942-POWER_SUPPLY_BRD |
| C8942-PRINT_MCHNSM |
PRINT_MECHANISM - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables. -
C8942-PRINT_MCHNSM |
| C8942-PULLEY |
PULLEY - Paper pick up tray motor pulley. -
C8942-PULLEY |
| 5183-5267 |
RETURN_KIT - Return kit with box and instructions - For returning defective Thermal InkJet (TIJ) 2.0 cartridges -
5183-5267 |
| C8942-ROD_CARRIAGE |
ROD_CARRIAGE - Carriage rod - shaft that the carriage assembly rides on -
C8942-ROD_CARRIAGE |
| C8942-ROLLER_EXIT |
ROLLER_EXIT - Paper exit rollers - out put assembly. -
C8942-ROLLER_EXIT |
| C8942-ROLLER_PICKUP |
ROLLER_PICKUP - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray -
C8942-ROLLER_PICKUP |
| C8942-SENSOR_EXIT |
SENSOR_EXIT - Exit media sensor sv -
C8942-SENSOR_EXIT |
| C8942-SENSOR_OPEN |
SENSOR_OPEN - Door sensor assembly - open door sensor -
C8942-SENSOR_OPEN |
| C8942-SENSOR_OUT |
SENSOR_OUT - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray -
C8942-SENSOR_OUT |
| C8942-SENSOR_SPOT |
SENSOR_SPOT - Spot sensor assembly is attached to the carriage assembly. -
C8942-SENSOR_SPOT |
| C8942-SEPARATOR |
SEPARATOR - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays. -
C8942-SEPARATOR |
| C8942A-Manual |
SERVICE_GUIDE_PH - HP DeskJet 656C Printer Reference Guide - Contains information such as product information, operation overview, paper behavior, mainenance, ink safety, and removal / replacement of parts -
C8942A-Manual |
| C8942-SERVICE_STATION |
SERVICE_STATION - Service station assembly - for conditioning the printheads when the carriage is in its home position -
C8942-SERVICE_STATION |
| C8942-SLED_ASSY |
SLED_ASSEMBLY - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly -
C8942-SLED_ASSY |
| C8942-SLIDER |
SLIDER - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side. -
C8942-SLIDER |
| C8942-SPEAKER |
SPEAKER - Speaker assembly - includes speaker cable. -
C8942-SPEAKER |
| C8942-SPITTON |
SPITTON - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process -
C8942-SPITTON |
| C8942-SPRING_CMPRSN |
SPRING_COMPRESSION - Compression spring - on pulley wedge, for carriage belt tension -
C8942-SPRING_CMPRSN |
| C8942-TRAY_ASSY |
TRAY_ASSEMBLY - Paper input tray assembly for loading paper (bottom). -
C8942-TRAY_ASSY |
| C8942-TRAY_ASSY_CVR |
TRAY_ASSEMBLY_COVER - Tray cover - the top cover for the paper pick up tray unit. -
C8942-TRAY_ASSY_CVR |
| C8942-TRAY_BASE |
TRAY_BASE - Tray base- bottom base of the paper input tray. -
C8942-TRAY_BASE |
| C8942-WINDOW |
WINDOW - Top/front access door assembly - print cartridge access door window. -
C8942-WINDOW |
Buy the full service manual
View full list of service parts