| Part |
Picture |
Description |
| RC1-2560-000CN |
Scanner output tray (U-shaped wire-form) |
| RC1-2564-000CN |
Scanner top cover - Dark plastic cover on the top of the printer - Has holes for all the function keys and display (With silk-screened English text) - Does not include the control panel assembly or any non-English overlays |
| RC1-2597-000CN |
Stapler/stacker access door - Front jam access door for stapler/stacker unit |
| RC1-2598-000CN |
Rear cover - Located on back of the printer next to the formatter cover |
| RC1-2691-000CN |
Rear cover - Plastic cover that protects the rear part of the three bin mailbox accesory |
| RC1-2758-000CN |
Torque limiter - Limits rotation of feed rollers |
| RC1-2759-000CN |
Bushing for HP Q3942A |
| RC1-2782-000CN |
Paper size arm - Senses paper size in paper tray - Three used |
| RC1-2789-000CN |
Bushing for HP Q3942A |
| RC1-2818-000CN |
Upper plate latch - Locking latch for upper plate assembly |
| RC1-2820-000CN |
Latch handle cover - Front cover for latch handle on upper plate assembly |
| RC1-2821-000CN |
Rear cover lock - Located at rear of upper plate assembly |
| RC1-2822-000CN |
Handle link - Mechanical link between upper plate handle and release latch |
| RC1-2823-000CN |
Cover - Front cover lock stopper holder |
| RC1-2827-000CN |
Arm - Goes on the upper inside front of printer |
| RC1-2828-000CN |
Arm - Triangle shaped arm on upper inside front of printer |
| RC1-2830-000CN |
Link rod - Connects to the toner cartridge drive gear mechanism |
| RC1-2833-000CN |
Arm cover - Located on upper front inside of the printer |
| RC1-2852-000CN |
Cover, Reverse Side Rear |
| RC1-2853-000CN |
Upper cartridge guide - Located in upper plate assembly |
| RC1-2854-000CN |
Legal size paper guide - Located in upper plate assembly |
| RC1-2855-000CN |
Right side laser shutter holder |
| RC1-2856-000CN |
Cartridge support - Lower toner cartridge support - Located in upper plate assembly |
| RC1-2857-000CN |
Base tray for HP Q3942A |
| RC1-2858-000CN |
Rail front for HP Q3942A |
| RC1-2859-000CN |
Rail rear for HP Q3942A |
| RC1-2864-000CN |
Flag holder - Output bin full flag holder |
| RC1-2881-000CN |
Handle cover - Lower right side cover handle |
| RC1-2884-000CN |
Duplexer guide - Guide/support for duplexer assembly |
| RC1-2886-000CN |
Guard, Gas spring edge rear |
| RC1-2892-000CN |
Roller-Delivery Option 1 |
| RC1-2893-000CN |
Roller - Delivery Option 2 |
| RC1-2901-000CN |
Door hinge - Right side door hinge - Two used |
| RC1-2902-000CN |
Rod link for HP LaserJet Enterprise M4555h |
| RC1-2911-000CN |
Crossmember support - Plate on left side of upper plate assembly |
| RC1-2922-000CN |
Bushing - Mounts on the rear part of the upper plate assembly |
| RC1-2980-000CN |
Switch rod - Metal rod that connects switch link to electrical switch on the engine power supply board |
| RC1-3002-000CN |
Link holder - Holder/mount for mechanical link beteen metal rod and outside power switch |
| RC1-3003-000CN |
Power switch link - Mechanical link beteen metal rod and outside power switch |
| RC1-3020-000CN |
Front guide - Front cover for 500 sheet paper cassette |
| RC1-3035-000CN |
Formatter cover |
| RC1-3039-000CN |
Cover front for HP Q3942A |
| RC1-3040-000CN |
Cover rear for HP LaserJet 4345 Series |
| RC1-3041-000CN |
Inner front cover - Inner front left corner cover |
| RC1-3042-000CN |
Rear cover - Left rear corner cover |
| RC1-3043-000CN |
Lower left cover - Plastic cover for left side of scanner module - Printer power switch mounts to this cover |
| RC1-3044-000CN |
Power switch button - Located on lower left side of printer |
| RC1-3052-000CN |
Front left side cover |
| RC1-3063-000CN |
Door switch holder - Secures top cover switch (SW101) to frame |
| RC1-3090-000CN |
Bushing stop - For the fuser lever - Located on the inside upper front part of the printer - Two used |
| RC1-3102-000CN |
Upper guide support block - Small L-shaped plastic block which supports the upper portion of the Reversing Mechanism |
| RC1-3106-000CN |
Laser scanner shutter lever |
| RC1-3124-000CN |
Hinge shaft stopper - Holds the right side door hinge pin in place |
| RC1-3196-000CN |
Front cover - Front side upper cover for 500 sheet feeder |
| RC1-3197-000CN |
Rear cover - Back side cover for 500 sheet feeder |
| RC1-3198-000CN |
Right cover - Right side upper cover for 500 sheet feeder |
| RC1-3199-000CN |
Left cover - Left side cover for 500 sheet feeder |
| RC1-3200-000CN |
Upper cover - Left side upper cover for 500 sheet feeder - Small top edge cover on left side |
| RC1-3205-000CN |
Flag jam sensor |
| RC1-3280-000CN |
Duplexer slot cover - Removable lower rear cover for Duplexer attachment slot |
| RC1-3282-000CN |
Lower rear cover - Covers rear of standard 500 sheet tray |
| RC1-3293-000CN |
Torque limiter - Located next to paper feeder roller in optional 500 sheet tray assembly |
| RC1-3303-000CN |
Detent stop for 500 sheet feeder |
| RC1-3304-000CN |
Tray number display - Changeable tray number tab for optional 500 sheet feeder |
| RC1-3324-000CN |
Fuser gear unit 40t driven by swing plate assembly unit. Gear attaches to fuser unit and driven by swing plate. |
| RC1-3338-000CN |
Fan duct - Air duct and fan mount for Fan 2 - Fan duct on right side of printer |
| RC1-3339-000CN |
Fan rod - Metal rod that mounts against Fan 2 on right side of printer - Used for noise reduction of Fan 2 |
| RC1-3340-000CN |
DC Controller board cable guide |
| RC1-3352-000CN |
Paper pickup arm - Pickup and feed roller holder for Tray 2 paper pickup assembly |
| RC1-3356-000CN |
Control panel overlay - English |
| RC1-3470-000CN |
Idler roller (plastic) - Free wheeling roller - Two used |
| RC1-3471-000CN |
Drive shaft - Drives pickup roller |
| RC1-3472-000CN |
Paper sensor flag - cylindrical plastic piece with a flag on each end (One senses the paper, the other activates the photo-sensor) |
| RC1-3483-000CN |
HP Laserjet printer 250 sheet paper tray unit |
| RC1-3534-020CN |
Cartridge guide - Upper right side toner cartridge guide |
| RC1-3537-000CN |
Fan Holder assembly - Plastic fan bezel with airflow ports - Directs airflow to the various parts of the printer - Mounts on the right side plate assembly |
| RC1-3537-020CN |
Fan Holder assembly - Plastic fan bezel with airflow ports - Directs airflow to the various parts of the printer - Mounts on the right side plate assembly |
| RC1-3539-020CN |
Cartridge guide - Upper left side toner cartridge guide |
| RC1-3544-000CN |
Cam Arm - Dogleg shaped arm - Disengages the toner cartridge drive gear when the toner cartridge acc |
| RC1-3544-020CN |
Cam Arm - Dogleg shaped arm - Disengages the toner cartridge drive gear when the toner cartridge access door is opened - Mounts between the access door and the main drive gear assembly |
| RC1-3550-000CN |
Memory tag arm holder - Supports the tag arm assembly (toner cartridge memory reader) - Mounts towards the right end of the laser/scanner support shelf |
| RC1-3551-000CN |
Tag arm - Spring loaded arm that holds the memory contact and cable (contacts the memory in the toner cartridge) - Mounts in the tag arm holder (Towards the right end of the laser/scanner support shelf) |
| RC1-3588-000CN |
Holder fan (c ) us only |
| RC1-3589-000CN |
Crg guide (c ) us only |
| RC1-3590-000CN |
Cover top (c ) us only |
| RC1-3596-000CN |
Cover left (c ) us only |
| RC1-3597-000CN |
Cover right (c ) us only |
| RC1-3665-000CN |
Bushing/shaft retainer (Plastic) - Small plastic cylinder with four nubs that twist - Locks into the side frame |
| RC1-3668-000CN |
Gear release link |
| RC1-3728-000CN |
Drawer holder - Right side Tray 2 holder - Also Tray 2 connector mount housing |
| RC1-3731-000CN |
Cable guide - L-shaped plastic guide with offset fingers - for routing cables through the printer |
| RC1-3731-020CN |
Cable guide - L-shaped plastic guide with offset fingers - For routing cables through the printer |
| RC1-3794-000CN |
Caution label - Do not run staples through the engine - Has graphic of a staple with a red circle/line through it |
| RC1-3796-000CN |
Transfer Guide Open label - Located on registration roller assembly |
| RC1-3800-000CN |
Top cover assembly - Has face-down paper output tray molded into it |
| RC1-3801-000CN |
Top cover assembly - Has face-down paper output tray molded into it |
| RC1-3812-000CN |
Left side printer cover - Has moled-in bezel for the interface port connectors (On the formatter board) |
| RC1-3814-000CN |
Right side cover assembly - Has molded-in air intake louvers |
| RC1-3819-000CN |
Rear access door assembly - For adding or removing the duplexer assembly from the printer - Mounts to the lower portion of the rear cover assembly |
| RC1-3844-000CN |
Cartridge guide - Front left side toner cartridge guide |
| RC1-3909-000CN |
Pickup roller assembly - Rubber roller on a short shaft with slots on the end - Does NOT include the two flanking hard plastic rollers |
| RC1-3911-020CN |
Bushing for HP LaserJet 2430 Printer |
| RC1-3912-000CN |
Bushing for HP LaserJet 2430 Printer |
| RC1-3914-000CN |
Arm paper sensor |
| RC1-3935-000CN |
Feed guide assembly - Mounts above transfer roller assembly |
| RC1-3936-000CN |
Registration roller assembly cover |
| RC1-3936-020CN |
Registration roller assembly cover |
| RC1-3937-000CN |
Pad holder - Separation pad holder |
| RC1-3939-000CN |
Paper sensor lever - Mechanical device that activates photo sensor PS902 Tray 1 paper sensor |
| RC1-3946-000CN |
Front base plate - Metal plate that fits under fuser assembly |
| RC1-3948-000CN |
Left front guide - Small black plastic piece on front left side of chassis in Tray 2 cassette guide slot |
