| Part |
Description |
|
1500-0855
|
HP Designjet 600, 650C Motor Belt (Small belt).Y axis drive belt. |
|
1500-0856
|
Carriage belt for HP DesignJet 36inch size plotters. |
|
51626A
|
26A print cartridge (Black) - High capacity, 40ml volume - Prints approximately 790 pages (actual yield depends on specific use)(North America) |
|
51626AA
|
26A Lge Black InkJet Crtg AP |
|
51626AC
|
26A Lge Black InkJet Crtg Can |
|
51626AE
|
26A Lge Black Inkjet Crtg EUR |
|
51626AL
|
26A Lge Black InkJet Crtg LAR |
|
51626G
|
Black Print Cartridge (Regular) - Prints Approximately |
|
51626GA
|
Black print cartridge (Regular) - Prints approximately 397 pages based on 5% density on a 8in by 10in print area (Asia/Pacific) |
|
51626GC
|
Black print cartridge (Regular) - Prints approximately 397 pages based on 5% density on a 8in by 10in print area (Canada) |
|
51626GE
|
Black print cartridge (Regular) - Prints approximately 397 pages based on 5% density on a 8in by 10in print area (Europe) |
|
51626GL
|
Black print cartridge (Regular) - Prints approximately 397 pages based on 5% density on a 8in by 10in print area (Latin America) |
|
51626TE
|
Black print cartridge (High capacity) - (2 pack of 51626AE) - Each one prints approximately 800 pages based on 5% density on a 8in by 10in print area (Europe) |
|
51642M
|
Cartridge for DesignJet-C1633A, DesignJet 600, DesignJet 650, DesignJet 200 E size |
|
5183-5267
|
Return kit with box and instructions - For returning defective Thermal InkJet (TIJ) 2.0 cartridges |
|
C6611AN
|
Black print cartridges (high capacity) - (two-pack of 51626A) each prints approximately 800 pages based on 5% density on an 8-inch (20.3cm) by 10-inch (25.4cm) print area (USA) |
|
5182-7322
|
Maintenance kit |
|
D2152-63001
|
8MB, 80nS, 36-bit SIMM memory module |
|
D2152-69001
|
8MB, 80nS, 36-bit SIMM memory module |
|
D2156-63001
|
4MB, 80nS, 36-bit SIMM memory module |
|
D2156-69001
|
4MB, 80nS, 36-bit SIMM memory module |
|
D2381-63001
|
2MB, 80nS, 36-bit SIMM memory module |
|
C2065A
|
4MB, 80nS, 36-bit SIMM memory module - For HP Plotters, LaserJet IIISi, 4/4M, 4Si/MX and other models. |
|
C2066A
|
8MB, 80nS, 36-bit SIMM memory module - For HP LaserJet IIISi, 4/4M, 4Si/MX |
|
6040-0990
|
Special lubricating oil - For carriage slider rod surface - (5cc oil) |
|
9100-5176
|
Pwer supply, 13v/300ma jpn |
|
5188-5676
|
Power module (wall mount) - Input voltage 100VAC, 47/63Hz - Output voltage 13VDC, 800mA, 10.4 watts (for use in Japan) |
|
0950-2372
|
Power supply module - 100-240VAC input, 47-63Hz, requires separate AC power cord - 5VDC output, 1A, 5 watts |
|
0950-3169
|
Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories. |
|
0950-3171
|
Power supply module - 220-240VAC input, 47-53Hz - 13VDC output, 300mA (U. K. and Hong Kong) |
|
0950-3172
|
Power supply module - 240VAC input, 47-53Hz - 13VDC output, 300mA (Australia) |
|
0950-3349
|
Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector Power supply module - 120VAC input, 60Hz - 12VDC output, 1.0A |
|
0950-3350
|
Wall mount power supply module (Leader Electronics 48130625HK) - 200VAC input, 48-52Hz - 13VDC output, 625mA (Hong Kong) |
|
0950-3351
|
Wall mount power supply module (MEI-AH ED12009) - 220VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (South Korea) |
|
0950-3352
|
Wall mount power supply module (MEI-AH ED12010) - 100VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (for use in Japan) |
|
0950-3354
|
Wall mount power supply module (MEI-AH ED12010) - 220-250VAC input, 47-53Hz - 13VDC output, 800mA, 10.4 watts (South Africa) |
|
0957-2109
|
Power supply module - 209-253VAC input, 47-53Hz - 13VDC output, 800mA (Europe and Israel) |
|
0957-2110
|
Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories. |
|
0957-2134
|
Wall mount power supply module (MEI-AH ED12010) - 100VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (for use in Japan) |
|
0957-2197
|
Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories. |
|
0957-2340
|
Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories. |
|
0957-2481
|
Pwra brk uni 12vdc 15w |
|
J3265A
|
External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
|
J4101-61011
|
External JetDirect LAN interface module with EtherTwist 10Base-T/100BaseTX connector |
|
C2859-60004
|
Paper drive (platen) roller assembly - Long gear driven roller |
|
C3191-60040
|
Overdrive roller - Shaft with rollers - Runs width of plotter |
|
C4700-60042
|
Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder |
Techical Help
View service parts