| Part |
Description |
|
RC1-0918-000CN
|
Paper feed belt - Small black belt between paper feed roller and small pulleys toward front - 3 used |
|
6R936
|
10a yield black toner |
|
Q2610-60001
|
Black toner cartridge (Ultra Precise Toner) - Prints approximately 6,000 pages based on a 5% print density |
|
Q2610A
|
10a yield black toner |
|
Q2610D
|
2-10a yield black toners |
|
RM1-0354-000CN
|
Fusing roller assembly (For 110V operation) - Bonds toner to paper with heat |
|
RM1-0354-050CN
|
Fusing assembly - For 110 VAC operation - Bonds toner to paper with heat;The following part(s) are related to part RM1-0354-050CN. May we suggest U6180-60001 |
|
RM1-0355-050CN
|
Fusing roller assembly (For 220V - 240V operation) - Bonds toner to paper with heat |
|
U6180-60001
|
Maintenance Kit (120V) - Includes fuser roller assembly, transfer roller assembly, Tray 1 and Tray 2 pickup rollers, Tray 1 and Tray 2 separation pads - Procedure requires use of service manual - Not for warranty use |
|
U6180-60002
|
Maintenance Kit (220V) - Includes fuser roller assembly, transfer roller assembly, Tray 1 and Tray 2 pickup rollers, Tray 1 and Tray 2 separation pads - Procedure requires use of service manual - Not for warranty use |
|
Q2651-67910
|
DIMM memory kit - 2300 Base Firmware Dimm |
|
Q2651-67911
|
DIMM memory kit - 2300L Firmware Dimm |
|
Q2677AF
|
DIMM KIT LJ2300D,DN,DTN (version 04.050.2) |
|
Q7707-67951
|
32MB, 100-pin SDRAM DIMM memory module |
|
C7842-67901
|
8MB, 100-pin SDRAM DIMM memory module |
|
C7843-67901
|
16MB, 100-pin SDRAM DIMM memory module (Part approaching End of Life, please contact HP for availability) |
|
C7845-67901
|
32MB, 100-pin SDRAM DIMM memory module |
|
J3113-61001
|
JetDirect 600N EIO Internal Print Server internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector |
|
J4167-61001
|
JetDirect 610N token ring LAN interface board - DB-9 and RJ-45 connectors |
|
J6057-69011
|
JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
|
J6057A
|
JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector |
|
J7934-69001
|
JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
|
J7934A
|
JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
|
RB2-2892-000CN
|
Guide roller (Free spinning white plastic roller) - Mounts on the paper pickup drive shaft on each side of the pickup 'D' shaped roller |
|
RB2-3484-000CN
|
Feed roller - Feed roller for sheet feeder - White plastic roller |
|
RB2-3484-020CN
|
Feed roller - Feed roller for sheet feeder - White plastic roller |
|
RB2-6277-000CN
|
Top output bin roller - Lower of the two middle set of rollers - 2 used |
|
RB2-6288-000CN
|
Roller guide - Small white plastic roller in rear paper output tray - 2 used |
|
RB2-6304-000CN
|
Pickup roller assembly - Rubber roller on a short shaft with slots on the end - Does NOT include the two flanking hard plastic rollers |
|
RB2-6400-000CN
|
Face-Down Delivery roller - Lower rollers - Four used |
|
C7058-67905
|
Delivery roller kit - Includes all face-down delivery roller assemblies, upper delivery roller supports, and roller drive gear |
|
RM1-0356-050CN
|
Fusing roller assembly (For 100V to 120V operation) - Includes heating element and fixing film sleeve |
|
RM1-0357-050CN
|
Fusing roller assembly (For 220V to 240V operation) - Includes heating element and fixing sleeve ONLY - This is NOT the fusing assembly |
|
RM1-0370-000CN
|
Face down top output bin delivery roller assembly - Includes roller and holder |
|
RM1-0371-000CN
|
Face-down output roller - Black roller shaft with four gray soft rollers attached and white plastic mounting tab on one end |
|
RC1-0920-000CN
|
Paper feed roller - White plastic shaft with three rollers that drive the three paper feed belts |
|
RC1-0945-000CN
|
Pickup roller - MP/Tray 1 pickup roller |
|
RC1-0978-000CN
|
Delivery roller - Roller for Upper Delivery Guide - 4 Used |
|
RC1-0982-000CN
|
Delivery roller - Feeds paper out of fusing assembly |
|
RC1-0991-000CN
|
Pressure roller - Applies pressure to paper as it feeds through the fusing roller |
|
RG5-5541-000CN
|
Delivery roller kit - Includes all face-down delivery roller assemblies, upper delivery roller supports, and roller drive gear |
|
RG5-5542-000CN
|
Delivery roller kit - Includes all face-down delivery roller assemblies, upper delivery roller supports, and roller drive gear |
|
RG5-5542-050CN
|
Face down delivery roller assembly - Middle two roller assemblies in center of top output bin |
|
RG5-5555-020CN
|
Feed roller assembly |
|
RL1-0542-000CN
|
Pickup roller assembly - Rubber roller on a short shaft with slots on the end - Does NOT include the two flanking hard plastic rollers |
|
RM1-0343-000CN
|
Transfer roller assembly - Includes left side bushing |
|
RM1-0346-000CN
|
Multi-purpose tray pickup roller assembly - Includes pickup roller, roller cam, right and left cams, both round rollers and dowel pin |
|
RM1-0347-000CN
|
Registration Assembly - Registration shutter and roller with holder frame assembly |
Techical Help
View service parts