| Part |
Description |
|
C6090-60072
|
Carriage belt - Long belt attached to the carriage (For the 42-inch wide version plotter) |
|
C6090-60088
|
Belt tensioner kit - Keeps carriage belt tight - Includes pulley assembly, pulley spring, wedge, and actuator arm |
|
Q1251-60144
|
Carriage belt - Long belt attached to the carriage (For the 42-inch wide version plotter) |
|
Q1251-60320
|
42 BELT SVC Carriage belt - Long belt attached to the carriage (For the 42-inch wide version plotter) |
|
Q1261-60029
|
Drive belt for HP DesignJet Copier CC800PS |
|
Q1251-67803
|
Cutter assembly kit - Includes cutter, screw and washer |
|
Q1251-60317
|
Cutter assembly kit - Includes cutter, screw and washer |
|
C6090-60094
|
Cutter assembly kit - Includes cutter, screw and washer |
|
Q1251-69306
|
PATA Hard drive 40GB - For the DesignJet 5500 RTL - Includes firmware version S.56.05 (for updated version S.56.07 firmware, order Q1251-60323). For SATA order Q1251-60146). |
|
Q1251-60323
|
PATA SVC HDD RTL FW S.56.07- RC Hard drive 320GB - For the DesignJet 5500 RTL - Includes firmware version S.56.07.(For SATA order Q1251-60146). |
|
Q1252-60017
|
Hard drive - For the DesignJet 5500 PS - Includes firmware version S.56.04 (FOR S.56.07 PS FW order Q1252-69045 and for SATA order Q1252-60054). |
|
Q1252-60030
|
Hard drive - For the DesignJet 5500 PS - Includes firmware version S.56.04 (FOR S.56.07 PS FW order Q1252-69045 and for SATA order Q1252-60054). |
|
Q1252-60041
|
Svs hdd oem fw o.56.04 ps-rc |
|
Q1252-60046
|
Svc hdd stork+ oem ps fw o.56. |
|
Q1252-69017
|
Hard drive - DesignJet 5500 PS firmware version S.06.02 PATA 80GB. (for SATA order Q1252-60054). |
|
Q1252-69030
|
Hard drive - For the DesignJet 5500 PS - Includes firmware version S.56.04 (FOR S.56.07 PS FW order Q1252-69045 and for SATA order Q1252-60054). |
|
Q1252-69041
|
Svs hdd oem fw o.56.04 ps-rc |
|
Q1252-69045
|
SVC HDD PS - Includes firmware version S.56.07 HARD DRIVE ASSEMBLY w/Postscript. Hard drive - For the DesignJet 5500 PS PATA 320GB. (for SATA HD order Q1252-60054). |
|
Q1252-69046
|
Svc hdd stork+ oem ps fw o.56. |
|
Q1261-60060
|
Maintenance kit - Includes 40-inch glass plate, white background board, support strip, fluorescent lamp assembly. - LIMITED SUPPLY - |
|
Q1251-60274
|
Maintenance kit - Includes 60-inch and 42-inch belts, encoders and trailing cables, drop detector assembly, pulley idler assembly, trailing clip, tensioner assembly, and the scan motor assembly - For the DesignJet 5500 printer series |
|
C6090-60314
|
Maintenance kit - Includes lens maintenance kit, carriage interconnect wiper kit, roller lubrification kit, and platen cleaning instructions |
|
C6095-60173
|
Maintenance kit - Includes lens maintenance kit, carriage interconnect wiper kit, roller lubrification kit, and platen cleaning instructions |
|
Q1251-60073
|
Maintenance kit - Includes 60-inch and 42-inch belts, encoders and trailing cables, drop detector assembly, pulley idler assembly, trailing clip, tensioner assembly, and the scan motor assembly - For the DesignJet 5500 printer series |
|
C6090-60185
|
128MB SDRAM DIMM memory module |
|
Q1251-60263
|
128MB SDRAM DIMM memory module |
|
Q1252-60003
|
DesignJet 5000 series boot ROM DIMM PS 05.00.01 |
|
Q1252-60029
|
DesignJet 5000 series boot ROM DIMM PS 05.00.01 Hewlett Packard plotters. |
|
C6090-60106
|
Setup printhead kit - Used to prime the ink tubes - Includes 6 setup printheads |
|
C6090-60077
|
Entry roller - The long roller located under the main printer chassis - 42 inches |
|
Q1261-60025
|
Media Feed roller |
|
C6071-60166
|
Carriage height tool |
View service parts