| Part |
Description |
|
Q7516-67901
|
Black toner cartridge - Prints approximately 12,000 pages per cartridge |
|
Q7516A
|
16a yield black toner |
|
RM1-2522-040CN
|
LaserJet 5200 series Fuser Assembly - Bonds the toner to the paper with heat - For 110VAC to 120VAC operation |
|
RM1-2522-070CN
|
Fusing assembly - For 110 VAC to 120 VAC operation - Bonds the toner to the paper with heat |
|
RM1-2524-040CN
|
LaserJet 5200 series Fuser Assembly - Bonds the toner to the paper with heat - For 220VAC to 240VAC operation |
|
RM1-2524-070CN
|
Fuser Assembly - For 220 VAC operation - Bonds toner to paper with heat |
|
RM1-2524-080CN
|
Fuser assembly - For 220 VAC - Bonds toner to paper with heat |
|
RM1-2524BULK48
|
Fuser Assembly - For 220 VAC - Bonds toner to paper with heat |
|
J6073A
|
High performance 20GB hard disk - Plugs in one of the Extended Input/Output (EIO) slots |
|
J6073G
|
High performance 20GB hard disk - Plugs in one of the Extended Input/Output (EIO) slots |
|
Q7713-67951
|
HP 32MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
|
Q7714-67951
|
48MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
|
Q7715-67951
|
64MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
|
Q7718-67951
|
128MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
|
Q7718A
|
128MB, 100-pin, DDR DIMM |
|
Q7719-67951
|
256MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
|
Q7719A
|
256MB, 100-pin, DDR DIMM |
|
Q7720-67951
|
512MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
|
Q7829-67925
|
Feed roller high capacity input (HCI) - Transmit the paper from the cassette and feeds it to the device entrance (blue) |
|
Q7829-67926
|
Paper pickup roller - MP/Tray 1 paper pickup roller |
|
Q7829-67928
|
Transfer roller assembly - Long metal shaft with Black roller and drive gear - Transfers static charge to the media being printed on |
|
RC1-7783-000CN
|
Duplexer paper feed roller - Front roller of the two feed rollers inside plastic cover of mechanical section of duplexer assembly |
|
RC1-7790-000CN
|
Duplexer paper feed roller - Rear roller of the two feed rollers inside plastic cover of mechanical section of duplexer assembly |
|
RC1-7837-000CN
|
Roller feed for HP LaserJet 5200 series |
|
RL1-0915-000CN
|
Paper pickup roller - MP/Tray 1 paper pickup roller |
|
RM1-0036-020CN
|
Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24-tooth white gear on one side |
|
RM1-0037-020CN
|
Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder |
|
RM1-0731-020CN
|
Paper pickup roller assembly - Includes the D shaped rubber roller on a plastic shaft - Mounts in the lower center of the center frame assembly |
|
RM1-0731-050CN
|
Paper pickup roller assembly - Includes the 'D' shaped rubber roller on a plastic shaft - Mounts in the lower center of the center frame assembly |
|
RM1-2485-020CN
|
Transfer roller - Transfer charge roller (Black) |
|
RM1-2490-000CN
|
Face down top output bin delivery roller assembly - Includes all rollers and holders in assembly. |
|
RM1-2490-010CN
|
Face down top output bin delivery roller assembly - Includes all rollers and holders in assembly |
|
RM1-2490-090CN
|
Assy-Face Down Paper Delivery |
|
RM1-2506-050CN
|
Registration assembly - Set of rollers before toner cartridge and after feed rollers |
|
RM1-3001-000CN
|
Registration roller assembly - Includes the roller, bushings, mounting plate, transfer upper guide, left and right registration side plate, registration roller shaft, and upper transfer sheet guide |
|
RM2-3830-000CN
|
Kit-Transfer Roller Assembly |
|
RM2-5642-000CN
|
Paper Feed Roller Assy |
|
RY7-5210-000CN
|
Kit-Paper Feed Roller Assy |
Techical Help
View service parts