Keyword Search "C7769BR"
C7769-Brush_small
Small brush for removing / brushing off residual particles in machine.
C7769B
HP DesignJet 500 24-in roll printer
C7769-40041
Ink Tube Cover for HP DesignJet 500 510 800 500PS 800PS 500 PLUS
C7769-40153
Hewlett Packard (HP)Hub spindle black svc cap. Cap supports roll paper spindle takes one on each side. Part number is for one pc.
C7769-40169
Hewlett Packard (HP)Hub spindle blue svc cap. Cap supports roll paper spindle takes one on each side. Part number is for one pc.
C7769-40233
Ink Supply Station (ISS) - Includes ink pump motor pump sensor and out-of-ink sensors - Installed in right side of printer
c7769-60013
Electronics module DSJ 500 / 800 series. Contains main logic board connectors for plug-in cards connector for parallel interface cable connector for USB cable and cooling fan
C7769-60018
Control panel assembly - Includes ribbon cable and english overlay marked with Menu Back Enter Cancel and Form feed and cut
C7769-60042
Interconnect PC board Interconnect PC board - Installed in right-side of printer
C7769-60063
Paper Axis Motor assembly - HP DesignJet 500 510 800 Paper axis motor assembly.
C7769-60065
Encoder disk assembly - Helps provide position the information of the paper
C7769-60111
Front panel overlay (self adhesive) - Shows the function of the front panel buttons and indicator lights (English)
C7769-60112
Front panel overlay (self adhesive) - Shows the function of the front panel buttons and indicator lights (Korean)
C7769-60113
Front panel overlay (self adhesive) - Shows the function of the front panel buttons and indicator lights (Taiwanese)
C7769-60114
Front panel overlay (self adhesive) - Shows the function of the front panel buttons and indicator lights (German)
C7769-60115
Front panel overlay (self adhesive) - Shows the function of the front panel buttons and indicator lights (French)
C7769-60116
Front panel overlay (self adhesive) - Shows the function of the front panel buttons and indicator lights (Spanish)
C7769-60117
Front panel overlay (self adhesive) - Shows the function of the front panel buttons and indicator lights (Italian)
C7769-60118
Front panel overlay (self adhesive) - Shows the function of the front panel buttons and indicator lights (Japanese)
C7769-60119
Front panel overlay (self adhesive) - Shows the function of the front panel buttons and indicator lights (Portuguese)
C7769-60120
Front panel overlay (self adhesive) - Shows the function of the front panel buttons and indicator lights (Chinese)
C7769-60122
Power supply assembly for designJet - Includes power switch. (pwr supply for copier module is Q1278-60072)
C7769-60143
formatter PC board EIO FORMATTER POWER HPGL2 SV - RC EIO WITH PC BOARD HP-GL/2 formatter PC board (Includes C7779-60270 128MB SDRAM 100MHz CL2)
C7769-60145
Power supply assembly - Includes power switch
C7769-60146
Carriage (scan-axis) motor assembly - Includes cable
C7769-60147
Carriage assembly trailing cable for 24-inch plotters flat ribbon cable / communication cable from carriage unit to board unit. Trailing Cable.
C7769-60148
Ink Supply Station (ISS) - Includes ink pump motor, pump sensor, and out-of-ink sensors - Installed in right side of printer
C7769-60149
Service station - Service St SV - RCService station - Includes wipers, pen caps, and the right hand spittoon - Installed in right side of printer
C7769-60151
Printhead carriage assembly - Includes carriage, bushings, pen latches, carriage position sensor, and line sensor
C7769-60152
Paper axis motor assembly - Includes cablesPaper axis motor assembly - Includes cables
C7769-60153
Ink Tubes Assy 24 SV mono (black and white plotters only) for the 24-inch Designjet 500/800 printer series
C7769-60154
Top cover assembly (Gray) - For the 24-inch DesignJet 500 printer series
C7769-60155
Back platen assembly - Curved cover/guide that is installed below the paper drive roller - For use with 24-inch plotters
C7769-60156
Service station bracket - Installed on right-side of service station
C7769-60157
Paper Drive Roller Kit - Includes Roller Assembly, Bushings,
C7769-60158
Left end cover and EIO cover (Gray) COVER WHITE (SVC) - Right cover Left end cover and EIO cover - White or Gray plastic cover on left side
C7769-60159
Right side cover (Gray) - For the DesignJet 500 printer series only
C7769-60160
Trim kit - Includes the front and back trims for the left and right sides - Installed between the main printer chassis and the left or right end covers
C7769-60161
Control panel assembly - Includes ribbon cable and english overlay marked with Menu, Back, Enter, Cancel, and Form feed and cut
C7769-60162
Rollfeed mount kit - Includes left and right housing
C7769-60163
Cutter assembly for Hewlett Packard Plotters DesignJet models.
C7769-60164
Setup printhead kit - Used to prime the ink tubes - Includes 4 setup printheads. Used to remove air and prime the ink system
C7769-60165
Left spittoon assembly - Contains absorbers which hold excess ink from printheads
C7769-60167
Media Deflector Kit - Installed in Front of Pinch-Wheels -
C7769-60168
Media sensor - Installed in the front of the rear platen
C7769-60170
Left cutter guide bracket and left encoder holder kit
