Partshere Shopping Cart Lexmark and HP New Oem and refurb parts
top bar

Information for: C2392A

C2392A HP at Partshere.com

C2392A

Universal serial bus (USB) interface cable - Type `A` connector to type `B` connector - 5.0m (16ft) long

  • MFG: HP Inc.
  • Condition: New
  • Status: Available
  • Price: $21.36
See basic detail page

This product works on the following models

Related Products

  • PartDescription
  • C7770-60147Carriage assembly trailing cable kit - Includes installation instructions, trailing cables, mounting clips, and a ferrite - Cables have 30-pin (M) edge connectors - 2.0m (6.5ft) long - For 42-inch models
  • 5063-1256IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
  • 5063-1257IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
  • 8120-8907Telephone cable (Australian) - 3.0m (9.8ft) long (Gray) - RJ-11 plug on one end, Australian phone plug on other end
  • 8120-8908Telephone cable (Korea) - 3.0m (9.8ft) long (Gray) - RJ-11 plug on one end, Korea phone plug on other end
  • 8120-8909Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Austria)
  • 8120-8910Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Belgium)
  • 8120-8911Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Denmark)
  • 8120-8912Telephone cable (Germany) - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end, Germany phone plug on other end
  • 8120-8913Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Israel)
  • 8120-8914Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Italy)
  • 8120-8915Telephone cable (four conductor) - RJ-11 (M) to telephone plug/socket connector - 3m (9.8ft) long (Netherlands)
  • 8120-8916Telephone cable (Finland and Norway) - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end, Norway phone plug on other end
  • 8120-8917Telephone cable (South Africa) - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end, South Africa phone plug on other end
  • 8120-8918Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Sweden)
  • 8120-8919Telephone cable (Switzerland) - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end, Switzerland phone plug on other end
  • 8120-8920Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Turkey)
  • 8120-8921Telephone cable (five conductor) - RJ-11 (M) to BS-601A (M/F) - 3m (9.8ft) long (for the U.K., New Zealand, and Hong Kong)
  • 8120-8922Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 phone plug connectors (Eastern Europe, Czechoslovakia, Slovenia, and Hungary)
  • 8120-8923Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (France, Morocco, and Tunisa)
  • 8121-0712Universal Serial Bus (USB) interface cable - Type A connector to type B connector - 0.6m (24-inches) long
  • 8121-0811Telephone cable (2-wire) - RJ11 (M) connectors - 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal, and Spain)
  • 8121-0844Telephone cable with bill tone filter - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Switzerland)
  • 8121-0868Universal Serial Bus (USB) interface cable (Black) - Type 'A' connector to type 'B' connector - 1.83m (6.0ft) long
  • 8121-1036Universal Serial Bus (USB) interface cable (Black) - Type A connector to type B connector - 0.6m (24-inches) long - USB 2.0 compliant
  • 92215NInterface cable kit - For HP peripherals designed for use in an AppleTalk/Phonenet network - Not for Macintosh models that have recessed I/O connectors
  • 92215SRS-422 serial cable - 8-pin (M) to 8-pin (M) - 2.0m (6.6ft) long
  • C2946A8120-8724 IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin high density IEEE-1284C (M) connector (type C) - 3.0m (9.8ft) long mini connector.
  • C2947AIEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long
  • C2950AIEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
  • C2951AIEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
  • C4530-60091Trailing cable assembly - Two ribbon cables attached to a plastic mounting bracket - 55.9cm (22in) long
  • C6518AUniversal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long
  • C6520AUniversal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector - 3.0m (9.8ft) long
  • C7769-60147Carriage assembly trailing cable for 24-inch plotters flat ribbon cable / communication cable from carriage unit to board unit. Trailing Cable.
  • C7769-60180Ribbon cable kit - Includes installation instructions and ribbon cable with ferrite - Cable has 40 pin (F) connectors - 1.6m (5.1ft) long.
  • C7769-60295Carriage assembly trailing cable for 24-inch plotters flat ribbon cable / communication cable from carriage unit to board unit. Trailing Cable.
  • C7770-60258Carriage assembly trailing cable kit - Includes installation instructions, trailing cables, mounting clips, and a ferrite - Cables have 30-pin (M) edge connectors - 2.0m (6.5ft) long - For 42-inch models
  • C7790-60421Front panel cable - Connects the front panel to the main logic PC board
  • C7790-67001Duplexer OOP (Out Of Paper) sensor harness
  • C7791-60213Motor harness for HP DesignJet 100 Series
  • C7791-60214Encoder harness
  • Q1251-60109Trailing cable kit - Includes trailing cable for your Hewlett Packard DesignJet / Plotter - 42 inches with 3 cables.
  • Q1251-67801Trailing cable kit - Includes trailing cable for your Hewlett Packard DesignJet / Plotter - 42 inches with 3 cables.
  • Q1253-60019Trailing cable kit - Includes trailing cable trailing cable clip cover cap trailing ferrite and screws on OEM only. - For 60-inch version
  • Q1253-67801Trailing cable kit - Includes trailing cable only; trailing cable clip cover cap trailing ferrite and screws provided on OEM only. - For 60-inch version
  • Q1261-60008Stitching Wire for HP HP DesignJet T1200 Series
  • Q1278-60064Firewire cable for HP DesignJet 5500mfp Series
  • Q1292-67010Front panel cable - Connects the front panel to the main logic PC board
  • Q1292-67014Encoder harness
  • Q1292-67029Motor harness uly svc kit
  • Q1293-67001Motor harness b one per svc
  • Q3498-60143Flat flexible cable (FFC) assembly - Connects between the line interface unit (LIU) PC board and the formatter board
  • Q3500-80001Telephone cable (2 Conductor) - RJ11 (M) to RJ11 (M) 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal and Spain)
  • Q3948-60129Flat flexible cable (FFC) assembly - Connects between the camera (photo) interface board set and the formatter board
  • Q3948-60143LIU cable assembly
  • Q3948-60144Flat flexible cable (FFC) assembly - Connects between the formatter assembly (J1001) and the DC controller board (J101)
  • Q5669-60681Carriage assembly trailing cable for 24-inch plotters flat ribbon cable / communication cable from carriage unit to board unit. Trailing Cable.
  • Q5914-60102Cable assembly - Connects the formatter board to the wireless network module
  • Q6456-60101Flat Flexable Cable (FFC) assembly - Connects between the DC controller board (J109) and the formatter board (J702)
  • RG5-6413-000CNLeft plate cable
  • RG5-6414-000CNRelay cable - Connects DC controller to HVPS, interlock switch to DC controller, and Fuser circuit to DC controller
  • RG5-6415-000CNDC Cable - DC power supply cable
  • RG5-6418-000CNAntenna cable - Between toner cartridge memory tag and antenna memory PC board - Four used
  • RG5-6419-000CNPaper feeder main cable
  • RG5-6422-000CNIntraface cable - Connects Formatter board to DC controller board and LVPS to Formatter board
  • RG5-6423-000CNSensor cable - Cable for PS12 fuser delivery and PS13 output bin full
  • RG5-6425-000CNFuser drawer fusing cable
  • RG5-6427-000CNAC Cable - Connects AC power supply to fuser power supply - 110 volt AC
  • RG5-6430-000CNOptional feeder and cassette size cable/connector
  • RG5-6434-000CNAC Cable - Connects AC power supply to fuser power supply - 220 volt AC
  • RG5-7106-000CNCable assembly (two 2-pin connectors)
  • RG5-7108-000CNCable assembly (two 8-pin connectors, Purple wire)
  • RG5-7109-000CNCable assembly (two 7-pin connectors)
  • RG5-7114-000CNCable assembly (two 4-pin connectors) with shield
  • RG5-7114-020CNCable assembly (two 4-pin connectors) with shield - Connects between the cartridge drive motor and the DC controller board
  • RG5-7115-000CNCable assembly (two 3-pin connectors)
  • RG5-7117-000CNCable assembly (two 3-pin connectors)
  • RG5-7122-000CNCable assembly - 'Y' type cable (three connectors) - The 14-pin connector splits into an 8-pin connector and a 6-pin connector
  • RG5-7123-000CNGrounding cable assembly
  • RG5-7126-000CNCable assembly (two 5-pin connectors)
  • RG5-7128-000CNCable assembly (four 3-pin connectors)
  • RG5-7129-000CNCable assembly (two connectors and two spade lugs)
  • RG5-7130-000CNHigh voltage cable assembly
  • RG5-7138-000CNCable assembly for HP Color LaserJet 2820 Series
  • RG5-7139-000CNCable assembly for HP Color LaserJet 2500 Series
  • RG5-7145-000CNFront cable assembly (six connectors)
  • RG5-7146-000CNHigh voltage cable assembly (two 15-pin connectors and two 14-pin connectors)
  • RG5-7154-000CNFusing assembly cable (for 110VAC to 127VAC operation)
  • RG5-7155-000CNFusing assembly cable (for 220VAC to 240VAC operation)
  • RG5-7156-000CNCable assembly (two 2-pin connectors)
  • RG5-7160-000CNUpper cable assembly (seven connectors)
  • RG5-7161-000CNCable assembly (two 3-pin connectors and a spad lug)
  • RG5-7433-000CNCable assembly - Connects between the Interconnecting feed drive PC board and the printer connector
  • RG5-7620-000CNCable assembly (two 5-pin connectors)
  • RG5-7621-000CNCable assembly (two 8-pin connectors)
  • RG5-7624-000CNCable assembly (two 3-pin connectors)
  • RH2-5471-000CNFlat cable - Connects formatter board to DC controller board
  • RH2-5524-000CNFlat flexible cable (FFC) assembly - Connects between the formatter assembly (J1001) and the DC controller board (J101)
  • RS971AAHP USB 2.0 Interface Cable - Type 'A' connector to type 'B' connector - 1.83m (6.0ft) long
bottom bar