Partshere Shopping Cart Lexmark and HP New Oem and refurb parts
top bar

Information for: C2913A

C2913A and more service parts available
C2913A

RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long

  • MFG: HP Inc.
  • Condition: New
  • Status: Available
  • Price: $24.92
See basic detail page

This product works on the following models

Related Products

  • PartDescription
  • 02276-80053Cable assembly which connects the main logic board to the print mechanism
  • 02276-80054Cable assembly which connects the power supply to the main logic board
  • 02276-80055Flex circuit cable which connects the head driver board to the carriage assembly
  • 02276-80118Cable assembly which connects the main logic board to the carriage motor
  • 13242GRS-232C cable - 25-pin (M) to 25-pin (M) - 5.0m (16ft) long
  • 17255DRS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long
  • 17255MRS-232C serial cable - 25-pin (M) to 25-pin (M) - 1.0m (3.3ft) long
  • 17302ARS-232C serial cable - 25-pin (M) to 8-pin (M) DIN - 1.5m (4.9ft) long
  • 17355MRS-232C serial cable - 25-pin (M) to 25-pin (M) - 3.0m (9.8ft) long
  • 24540-80010Centronics (parallel) cable - 36-pin (M) to 25-pin (M) - 2.0m (6.6ft) long
  • 24542GRS-232C serial cable - 25-pin (M) to 9-pin (F) - 3.0m (9.8ft) long
  • 31391ARS-232C serial extension cable - 25-pin (M) to 25-pin (F) - 5.0m (16.4ft) long
  • 5063-1256IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
  • 5063-1257IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
  • 92215SRS-422 serial cable - 8-pin (M) to 8-pin (M) - 2.0m (6.6ft) long
  • 92219MRS-232C serial cable - 25-pin (M) to 9-pin (M) - 1.5m (4.9ft) long
  • A6144-63008RS-232C serial cable - 25-pin (M) to 9-pin (F) - 3.0m (9.8ft) long
  • C1633-60014Cable assembly with ferrite - 18-pin (F) connector to four cables - Other connectors are two 4-pin (F), one 4-pin (M), and one 6-pin (F) - Overall length is 93cm (37.8in)
  • C1633-60050Carriage assembly trailing cable - 28-pin (F) connector to 28-pin (F) connector attached to mounting hardware - 1.6m (5.3ft) long
  • C2801-60003Output stacker interface cable
  • C2801-80014Output stacker elevator module ribbon cable
  • C2801-80026Telephone cable assembly - 4-pin (F) RJ-11 connector to 2-pin (F) connector - 22.1cm (8.7in) long
  • C2847-60005Power supply cable - Has 12-pin (F) connectors - 33cm (13in) long
  • C2847-60019Ribbon cable - 5-pin (F) connector to 5-pin (F) connector - 40.3cm (15.9in) long
  • C2847-60034Ribbon cable - Has 12-pin (F) connectors - 1.2m (3.9ft) long
  • C2858-60011Cable harness assembly
  • C2858-60024Carriage assembly trailing cable
  • C2950AIEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
  • C2951AIEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
  • C2990AIEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long
  • C2991AIEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long
  • C3180-60007Trailing cable for HP DesignJet 220 D size
  • C3180-60012Ribbon cable - Has 5-pin (F) connectors - 16.3cm (6.4in) long
  • C3195-60056Power supply cable - Has 12-pin (F) connectors - 9.5cm (3.7in) long
  • C3195-60057Ribbon cable assembly (Black) - Contains a 12 wire 82.6cm (32.5in) cable and a 14 wire 96.5cm (38in) cable - Connectors are a 28-pin (F) connector, three 6-pin (F) marked 'SVS', 'Bail', and 'Primer', a 4-pin (F), and a 4-pin (M)
  • C3195-60102Ribbon cable with ferrite - Has 5-pin (F) connectors - 16.5cm (6.5in) long
  • C3195-80009Carriage assembly trailing cable 36 inch E size plotter -with 2 ribbon cables bundled together - for hewlett packard designJet plotter DSJ 700 , 750, 755CM SERIES. OEM New HP, limited.
  • C3196-60056Power supply cable - Has 12-pin (F) connectors - 39.7cm (15.6in) long
  • C3196-60057Ribbon cable assembly (Black) - Contains a 12 wire 1.1m (3.8ft) cable and a 14 wire 1.3m (4.2ft) cable - Connectors are a 28-pin (F) connector, three 6-pin (F) marked `SVS`, `Bail`, and `Primer`, a 4-pin (F), and a 4-pin (M)
  • C4713-60181Carriage assembly trailing cable (D-size) - Has 60-pin (F) connectors - 1.6m (5.2ft) long
  • C4713-60182Flexible stranded wire cable - 12.5cm (4.9in) long
  • C4714-60181Carriage assembly trailing cable (E-size) - Has 60-pin (F) connectors - 1.9m (6.2ft) long
  • C6080-6001510Base-T Ethernet cross over cable - RJ-45 to RJ-45 - 3m (9.8ft) long
  • RF1-2427-000CNAC connector cable assembly - For fusing assembly
  • RG1-0905-000CNCable assembly - From AC power module to DC power supply
  • RG1-0906-000CNCable assy - From DC controller to high voltage power supply
  • RG1-0907-000CNCable assembly - Large 7-pin (F) connector to small 7-pin (F) connector - 41.5cm (16.4in) long
  • RG1-0908-000CNDual cable assembly with ferrites - One 7-pin (F) connector, two 5-pin (F) connectors, and one 4-pin (F) connector - 43.2cm (17in) long
  • RG1-0912-000CNCable assembly - Large 4-pin (F) connector to small 4-pin (F) connector - 6.7cm (2.6in) long
  • RG1-1318-000CNUpper main AC power cable harness which connects to most major assemblies - 120v, 60Hz
  • RG1-1319-000CNLower main cable harness
  • RG1-1370-000CNCable assembly for HP LaserJet II
  • RG1-1602-000CNCable assembly - From AC power supply to fusing assembly
  • RG1-1608-000CNCable assembly - Includes pickup solenoid
  • RG1-1609-000CNCable assembly - Has eight connectors
  • RG1-1612-000CNSensor cable assembly
  • RG1-1632-000CNUpper main cable harness which connects to most major assemblies - 240V, 50Hz
  • RG1-1946-000CNCable assembly for HP LaserJet III
  • RG1-2067-000CNDual cable assembly with ferrites - 7-pin (F) connector, two 5-pin (F) connectors, and one 4-pin (F) connector - 48.9cm (19.3in) long
  • RG1-2307-000CNCable assembly - From formatter board to control panel
  • RG5-0103-000CNCable assembly for HP LaserJet 4Si Series
  • RG5-0104-000CNCable assembly for HP LaserJet 4Si Series
  • RG5-0107-000CNCable assembly for HP LaserJet IIISi
  • RG5-0108-000CNCable assembly - From DC controller to paper input board
  • RG5-0109-000CNCable assembly - From DC controller to duplex board
  • RG5-0130-000CNCable assembly - From DC controller to formatter board
  • RG5-0519-000CNCable assembly for HP LaserJet 4 Series
  • RG5-0520-000CNCable assembly - From DC controller to scanner assembly
  • RG5-0521-000CNCable assembly for HP LaserJet 4 Series
  • RG5-0522-000CNCable assembly - From DC controller to delivery sensor (PS3)
  • RG5-0524-000CNCable assembly - From DC controller to paper control board
  • RG5-0526-000CNCable assembly - From DC controller to AC power supply
  • RG5-0529-000CNCable assembly for HP LaserJet 4
  • RG5-0530-000CNCable assembly - From paper control board to connector for the optional lower cassette sheet feeder assembly
  • RG5-0538-000CNCable assembly - From DC controller to main motor
  • RG5-0556-000CNCable assembly - From DC controller to laser assembly
  • RH2-5104-000CNFiber optic cable - From DC controller to fiber optic lens
  • RH2-5108-000CNLaser/scanner fiber optic cable - 42.5cm (16.8in) long
  • RH2-5109-000CNFiber optic cable
  • SG4-6271-000CNCable assembly for HP LaserJet II
  • SG5-4022-000CNCable assembly for HP LaserJet III
bottom bar