Partshere Shopping Cart Lexmark and HP New Oem and refurb parts
  • Partshere, Toners, HP printers and parts
  • About Partshere
  • Contact Partshere
  • Partshere Support
  • Partshere Order Status
  • Partshere Login
top bar

Information for: C7309-40153

Part Search HP Printer Parts Store Lexmark Parts Store
HP Partsurfer Tool HP Printer Support Center
C7309-40153 HP at Partshere.com
C7309-40153

Cleanout assembly strip - Green plastic bar with two grab tabs - Can be removed to help clear paper jams in the automatic document feeder assembly

  • MFG: HP Inc.
  • Condition: New
  • Status: Available
  • Price: $14.41
See basic detail page

This product works on the following models

Related Products

  • PartDescription
  • C6436-40100LIO cover - Covers opening for unused LIO slot
  • C7296-00006Cover, electronics
  • C7296-00026Tray/Cover- Corrugated
  • C7296-60013Top cover (document Lid) - Attaches to the top of the scanner assembly
  • C7309-40128ADF cleanout assembly - Used to clear paper jams
  • C9124-40002Left scanner cover
  • C9124-40003Right scanner cover
  • C9126-40003PC board cover - Rectangular shaped plastic pan
  • CB534-67907Automatic ducoment feeder (ADF) top cover - Plastic cover that protects the paper pick-up mechanism
  • Q1636-40002Left side cover assembly
  • Q1636-40003Right side cover assembly
  • Q1636-40004Rear cover assembly
  • Q1636-40010Motor shield - Covers flatbed scanner ADF motor - Located on left rear corner of ADF drive
  • Q1636-69002ADF Cover- Covers the top of the ADF assembly - Typically used for clearing paper jams and provides access for the replacement of the pick roller and pad separator
  • Q3948-40007ADF cover assembly (ONLY) - Covers the paper pickup and feed mechanism
  • Q3948-67914Internal cover kit - Includes the curved plastic cover (with recessed area for grasping the handle on the imaging drum/transfer assembly) and the cartridge removal label
  • Q6500-67901ADF cover - Replacement cover for ADF mounted on flatbed scanner lid
  • Q6502-60117Scanner ADF lid - Flatbed scanner cover and attached ADF unit - Used on LaserJet 3052/3055 AIO models only
  • Q6502-67901ADF cover - Replacement cover for ADF mounted on flatbed scanner lid
  • RA0-1450-020CNFront cover - Lower front of printer - With opening for inserting the paper input tray assembly
  • RB2-9916-020CNCover - For the engaging motor (PM704) - Mounts on the upper left side of the rear frame assembly
  • RB3-0052-000CNGear Cover (Small Black plastic cover) - Covers the left end of the feed drive shaft
  • RB3-0104-000CNRoller cover - Covers the multipurpose paper pickup roller assembly - Mounts on the lower front of the front frame assembly
  • RB3-0120-000CNSolenoid cover (Steel) - For magnetic wave sheilding
  • RB3-0120-020CNSolenoid cover (Steel) - For magnetic wave sheilding - Mounts over the solenoid on the right side of the front frame assembly
  • RB3-0165-000CNTop inner cover (black plastic) - Covers the back half of the pressure roller arms and springs
  • RB3-0166-000CNBottom inner cover (Black) plastic - One covers the paper feed sensor in the center and the other covers sensor wires toward the right side
  • RB3-0282-000CNInner cover - Covers the small interconnecting PC board
  • RB3-0283-000CNInner cover - Covers the bottom of the connector that interconnects the input tray base to the printer
  • RB3-1032-000CNFusing assembly upper cover - Ribbed cover with end caps
  • RB3-1087-000CNTop cover for HP Color LaserJet 2820 Series
  • RB3-1123-000CNTop cover (ONLY) - Has molded-in tray for face down paper output - Does NOT include lift-up door or any other attaching parts
  • RB3-1125-000CNUpper front cover - Rectangular plastic piece with recess for the printer logo
  • RB3-1126-000CNUpper left cover - Small cover that is part of the inner side wall in the cartridge access area and provides support for the exterior left side cover
  • RB3-1128-000CNLeft side cover (ONLY) - Does NOT include the vent cover or power switch button
  • RB3-1129-000CNRight side cover (ONLY) - Does NOT include the memory access door or grounding plate
  • RB3-1130-000CNUpper rear cover assembly - Also guides the paper from the fusing assembly to the top output (face down) tray
  • RB3-1131-000CNLeft rear cover - 'U' shaped cover that mounts on the under-side of the extension for the left scanner hinge
  • RB3-1132-000CNRight rear cover - 'U' shaped cover that mounts on the under-side of the extension for the right scanner hinge - Covers the scanner interconnection cables
  • RB3-1133-000CNUpper front cover (ONLY) - Back support for the multipurpose cover assembly
  • RB3-1134-000CNInternal cover (ONLY) - Curved plastic piece with recessed area for grasping the handle on the imaging drum/transfer assembly - Mounts towards the front of the printer just above the multipurpose tray
  • RB3-1135-000CNLower front cover - Rectangular plastic strip - Mounts just below the multipurpose input tray on the front of the printer
  • RB3-1136-000CNFace-down paper output cover ('L' shaped plastic) - Serves as the rear of the tray for the face-down output on top of the printer
  • RB3-1137-000CNI/O cover - Rectangular plastic cover with a recessed cutout for the interface connectors
  • RB3-1139-000CNVent cover - Rectangular plastic cover with molded-in ventilation louvers
  • RB3-1140-000CNRear cover / face-up output tray (ONLY) - When opened, routes printed pages to this cover/tray for face-up output
  • RB3-1140-010CNRear cover / face-up output tray - When opened, routes printed pages to this cover/tray for face-up output
  • RB3-1168-000CNLeft side support frame/cover assembly - For the base on the 250-sheet input tray assembly
  • RB3-1170-000CNFront cover - Mounts on the front of the cassette assembly for the 250-sheet input tray assembly
  • RC1-1985-000CNLower rear cover assembly - Covers the paper pickup assembly - Larger of the two covers on the rear of the printer
  • RC1-2471-000CNLeftt side cover assembly - Slightly curved plastic cover with the HP logo molded into it - Has cutout for the rear panel power switch and power cord receptacle - Covers the power supply assembly
  • RC1-2472-000CNRight side cover assembly - Slightly curved plastic cover with the HP logo molded into it - Has cutout for the rear panel interface connectors
  • RC1-2474-000CNUpper rear cover assembly - Small plastic cover that protects the Fuser Assembly - Mounts on the top rear of the printer - Has air louvers for ventilation
  • RC1-2474-020CNUpper rear cover assembly - Small plastic cover that protects the Fuser Assembly - Mounts on the top rear of the printer - Has air louvers for ventilation
  • RC1-2474-040CNUpper rear cover assembly - Small plastic cover that protects the fusing assembly - Mounts on the top rear of the printer - Has air louvers for ventilation
  • RC1-7508-000CNTop cover - Top of printer section that document scanner/ADF assembly mounts to
  • RC1-7509-000CNLeft side cover - Plastic cover for left side of printer - Does not include DIMM memory access door
  • RC1-7511-000CNRight side cover - Plastic cover for right side of printer - Does not include stapler plug cover
  • RC1-7512-000CNStapler slot cover - Attaches to right front corner of printer - Used to cover hole if stapler unit is not installed
  • RC1-8368-000CNLower rear cover assembly - Covers the paper pickup assembly - Larger of the two covers on the rear of the printer
  • RC1-8373-000CNLeft side cover assembly - Slightly curved plastic cover with the HP logo molded into it - Has cut out for the rear panel power switch and power cord receptacle - Covers the power supply assembly
  • RC1-8374-000CNRight side cover assembly - Slightly curved plastic cover with the HP logo molded into it - Has cutout for the rear panel interface connectors
  • RC1-8416-000CNLJ3050 scanner top plastic cover - Does not include electronics assembly
  • RC2-0330-000CNFront cover - Plastic cover located at the buttom of the cartridge door assembly
  • RC2-0420-000CNMultipurpose paper input tray pick-up roller cover - Plastic cover that protects the paper pick-up roller
  • RC2-2940-000CNTop cover assembly - Plastic cover that protects the top part of the printer chassis
  • RC2-2960-000CNCartridge access top cover - Protects carriage and printer mechanism
  • RC2-2971-000CNFuser rear cover - Protects the fuser assembly - Located on the top rear side of the printer
  • RC3-1700-000CNLower Rear Cover Assembly - For Use With Duplex Models Only
  • RC3-1732-000CNRight Cover Assembly - Plastic Cover That Protects The Right Side Of The Printer
  • RC3-1733-000CNRight Front Cover Assembly - Plastic Cover That Protects The Right Front Part Of The Printer
  • RC3-1751-000CNDimm Cover - Plastic Cover That Provides Access To The Memory Dimm - Located On The Right Cover Assembly.
  • RF0-1100-000CNTop cover assembly - Has face-down paper output tray molded into it - Mounts to top of printer, providing mounting support for the scanner assembly
  • RF0-1100-030CNTop cover assembly - Has face-down paper output tray molded into it - Mounts to top of printer - Provides mounting support for the scanner assembly
  • RF5-4053-000CNUpper right cover - Small cover that has a cutout for the scanner release button
  • RF5-4054-000CNUpper right cover assembly - Includes the cover and clear plastic door - Small cover that has a cutouts for the scanner release button and camera (photo) memory interface card slots (Does NOT include the PC boards)
  • RG0-1114-000CNRear cover assembly - Includes rear cover and fold down face-up (or straight through) paper output tray (tray is NOT sold separately)
  • RG0-1116-000CNRight side cover assembly - Has molded-in air intake louvers
  • RG0-1122-000CNPaper tray cover assembly - Includes clear plastic cover with blue width adjustment guides for `priority` paper input
  • RG5-7597-000CNTop cover assembly - Includes the rear cover with molded-in face-down output tray and the lift-up toner cartridge / imaging drum and transfer assembly cartridge access door - Does NOT include the upper front cover
  • RG5-7598-000CNLeft side cover assembly - Includes the main cover, vent cover, power switch button, rod and spring (The power switch is located on the low voltage power supply board)
  • RG5-7599-000CNRight side cover assembly - Includes the right side cover, DIMM memory access door, and the formatter grounding plate
  • RG5-7604-000CNRear cover / face-up output tray assembly - Includes the tray/cover and the lower Fuser Assembly cover - When opened, routes printed pages to this cover/tray for face-up output
  • RG5-7604-010CNRear cover/face-up output tray assembly - Includes the tray/cover and the lower Fuser Assembly cover - When opened, routes printed pages to this cover/tray for face-up output
  • RG5-7634-000CNRight side support frame/cover assembly - Includes the frame/cover, printer interface connector, cable, feed drive PC board, and snap-on lid - For the base on the 250-sheet input tray assembly
  • RL1-0358-000CNFront cover assembly - Has cutouts for the toner cartridge door release button, and paper input tray assembly
  • RL1-1160-000CNFront cover assembly - Has cutouts for the toner cartridge door release button, and paper input tray assembly
  • RL1-1732-000CNTop cover assembly - Protects the top part of the printer chassis
  • RL1-1734-000CNFront cover assembly - Covers the front and top center of the printer
  • RL1-1735-000CNLeft cover - Plastic cover that protects the left side of the printer
  • RL1-1736-000CNRight cover - Plastic cover that protects the right side of the printer
  • RL1-3063-000CNLeft Cover Assembly - Plastic Cover That Protects The Left Side Of The Printer
  • RL1-3068-000CNUpper Rear Cover Assembly - For Use With Duplex Models Only
  • RL1-3072-000CNRear Cover Assembly - Rectangular Shaped Plastic Cover - For Use With Simplex Models Only
  • RM1-1308-000CNRear cover assembly - Includes the rear cover bezel and fold down face-up (or straight through) paper output tray (Tray is NOT sold separately)
  • RM1-1308-020CNRear cover assembly - Includes the rear cover bezel and fold down face-up (or straight through) paper output tray (Tray is NOT sold separately)
  • RM1-1323-030CNTray front cover assembly - Mounts to the front of tray 2
  • RM1-2643-040CNFront cover assembly - Has cutouts for the toner cartridge door release button, and paper input tray assembly
  • RM1-3076-020CNLeft scanner cover - Mounts on the left end of the scanner assembly
  • RM1-3077-020CNRight side cover assembly for paper scanner assembly
  • RM1-4270-000CNRear cover assembly - Plastic cover that protects the rear part of the printer
  • RM1-4707-000CNLeft cover - Plastic cover that protects the left side of the printer - Includes the DIMM access door
  • RM1-4708-000CNRight cover - Plastic cover that protects the right side on the printer - Includes stapler cover
  • RM1-4712-000CNInner cover assembly - Located on the cartridge door assembly
  • RM1-8060-000CNTop Cover Assembly - Plastic Cover That Protects The Top Part Of The Printer - Where Paper Rest After It Has Been Printed
bottom bar
Copyright © 2024 Partshere.com Privacy Policy Terms and Conditions Send us your feedback