Partshere Shopping Cart Lexmark and HP New Oem and refurb parts
top bar

Information for: RB2-6453-000CN

HP parts picture diagram for RB2-6453-000CN

RB2-6453-000CN

Inner cover (Small Quartz Gray plastic cover with sensor flag slot)

  • MFG: HP Inc.
  • Condition: OEM
  • Status: Discontinued
  • Price: RFQ
See basic detail page

This product works on the following models

Related Products

  • PartDescription
  • RB2-3489-000CNInner cover (Small Quartz Gray plastic cover)
  • RB2-9916-020CNCover - For the engaging motor (PM704) - Mounts on the upper left side of the rear frame assembly
  • RB3-0028-000CNLeft side cover (Quartz Gray) - Does not include any attaching parts
  • RB3-0030-000CNUpper rear cover (Quartz Gray) - Mounts on the upper rear of the printer above the face-up output tray door
  • RB3-0032-000CNFace-down paper output L-Shaped cover ( Blue) - Serves as the rear of the tray for the face-down output tray on top of the printer
  • RB3-0052-000CNGear Cover (Small Black plastic cover) - Covers the left end of the feed drive shaft
  • RB3-0102-000CNFront inner cover (Blue) - Mounts on the front frame above the multi-purpose input tray
  • RB3-0103-000CNFront lower cover (blue plastic) - Front lower strip below the multi-purpose input tray - Has recessed area for the printer logo
  • RB3-0104-000CNRoller cover - Covers the multipurpose paper pickup roller assembly - Mounts on the lower front of the front frame assembly
  • RB3-0106-000CNLeft side frame/cover (Quartz Gray) plastic - Left side cover and input paper tray guide
  • RB3-0109-000CNFront cover for the 250 sheet paper cassette tray (Blue) plastic - Has molded in paper loading instructions and a '2' on the front
  • RB3-0120-000CNSolenoid cover (Steel) - For magnetic wave sheilding
  • RB3-0120-020CNSolenoid cover (Steel) - For magnetic wave sheilding - Mounts over the solenoid on the right side of the front frame assembly
  • RB3-0140-000CNLeft cover plate (Quartz Gray) plastic - Mounts on the left side of the center frame assembly
  • RB3-0141-000CNRight cover plate (Quartz Gray) plastic - Mounts on the right side of the center frame assembly
  • RB3-0165-000CNTop inner cover (black plastic) - Covers the back half of the pressure roller arms and springs
  • RB3-0166-000CNBottom inner cover (Black) plastic - One covers the paper feed sensor in the center and the other covers sensor wires toward the right side
  • RB3-0282-000CNInner cover - Covers the small interconnecting PC board
  • RB3-0283-000CNInner cover - Covers the bottom of the connector that interconnects the input tray base to the printer
  • RC1-1353-000CNMotor cover - Black plastic cover for feed motor M1
  • RC1-1488-000CNConnector cover - Black plastic connector cover for feed motor M1
  • RC1-1563-000CNRight side of printer cover - Does not include logo plate
  • RC1-1565-000CNRear cover - Small cover above rear paper output tray
  • RC1-1566-000CNRear jam access door - Small access door above small rear cover over rear paper output tray
  • RC1-1574-000CNMP/Tray 1 cover - Front cover for drop down MP/Tray 1
  • RC1-1605-000CNScrew cover - Clear plastic cover with three bubbles to protect screw heads - Peel off backing adhesive for mounting
  • RC1-1640-000CNLaser shutter cover - Black plastic guides mounted to metal back of printer - Four used
  • RC1-1665-000CNCover - Solenoid cover for SL2 on right front of printer
  • RC1-2178-000CNFront cover - Plastic piece that cover the space between the bottom of printer and top of the 500-sheet cassette tray assembly
  • RC1-2179-000CNRight cover - Right side external plastic cover for the 500-sheet paper feeder assembly
  • RC1-2180-000CNLeft cover - Left side external plastic cover for the 500-sheet paper feeder assembly
  • RC1-2236-000CNController cover - DC Controller board cover
  • RC1-2237-000CNLower frame cover - Bottom cover for 250 sheet/Tray 2
  • RC1-2296-000CNHinge cover - Covers hinge on bottom of front cover assembly - 2 used
  • RC1-2364-000CNFormatter cable cover - Metal cover for the ribbon cable between the formatter and the DC Controller board
  • RC1-2379-000CNCover shield - Cover shield for registration clutch CL1 and mount
  • RG5-6900-000CNTop cover assembly (blue plastic) - Includes the molded-in face-down output tray and the lift-up top cover door assembly
  • RG5-6902-000CNLeft side cover assembly (Quartz Gray) plastic - Includes the power switch button, rod and spring (The power switch is located on the low voltage power supply board)
  • RG5-6919-000CNRight side frame/cover assembly (Quartz Gray) plastic - Includes the right side cover and paper tray guide, the cassette retainer spring, tray 3 connector, printer interface connector, and rubber feet
  • RG5-6922-000CNFront Cover for the 500 sheet paper cassette tray (blue plastic) - Has molded in paper loading instructions and a '3' on the front
  • RG5-6953-000CNRight side cover assembly (Quartz Gray) plastic - Includes the DIMM memory door
  • RM1-0463-000CNFront cover assembly - Front of printer including drop down MP/Tray 1 assembly.
  • RM1-0463-020CNFront cover assembly - Front of printer including drop down MP/Tray 1 assembly
  • RM1-0466-030CNLeft side plastic cover for printer - DIMM access side
  • RM1-0467-000CNLeft front cover assembly - Left front corner plastic with control panel
  • RM1-0743-000CNTop cover assembly - Top of printer with face down paper output
bottom bar