Partshere Shopping Cart Lexmark and HP New Oem and refurb parts
top bar

Information for: RB2-8040-000CN

HP parts picture diagram for RB2-8040-000CN

RB2-8040-000CN

Top cover assembly - `U` shaped plastic cover - Covers the top of the scanner in the ADF assembly - Mounts on the left end of the ADF assembly

  • MFG: HP Inc.
  • Condition: OEM
  • Status: Available
  • Price: $126.68
See basic detail page

This product works on the following models

Related Products

  • PartDescription
  • 4A1-7519-000CNInternal paper path cover (dispose roller assembly cover) - Mounts under the upper panel (top door) toward the stacker bin
  • 4F1-2090-000CNFoot cover - Plastic panel that covers the bottom support arms and casters
  • 4G1-4983-000CNFront cover assembly - Includes the front cover panel with support leg cover and the stapler access door assembly
  • 4G1-4984-000CNRear cover assembly - Includes the rear cover shell with support leg cover
  • 5851-2583EIO slot cover - Installs on formatter boards without JetDirect PCA
  • C8084-60501Stacker controller PC board cover - Includes label
  • C8085-60504Rear cover of 3000 sheet output device
  • C8085-60505Front cover of 3000 sheet stacker
  • C8085-60507Stapler controller PC board cover - Includes label
  • C8085-60516Foot cover for HP Color LaserJet 9500 Series
  • C8085-60520Bubbled cover - Half-domed shaped cover - Covers the inlet for the power cord and interface cable
  • Q5693-60509Front cover assembly - Large rectangular with a cutout for the LED display - Mounts on the front of the 8-bin mailbox assembly
  • Q5693-60510Rear cover assembly - Includes the large rectangular cover, bubbled cover, channel cover, interface cable, cable adapter, and power cord
  • Q5693-60517Top cover assembly - Slightly curved rectangular piece - Mounts on top of the 8-bin mailbox assembly
  • Q5693-60520Blind cover assembly - `U` shaped cover - Mounts between the face-up output tray and the upper-most face-down output tray - Slides in and secures in the side retaining notches on the 8-bin mailbox assembly
  • RB2-5531-000CNBlanking cover - Located behind the cartridge release lever
  • RB2-5607-000CNFan cover - Metal cover for fan #5 - Cartridge fan cover
  • RB2-5607-020CNFan cover - Metal cover for fan #5 - Cartridge fan cover
  • RB2-5659-000CNTop right cover - Located on the right side portion of the top cover
  • RB2-5660-000CNTop left cover - Face down paper output cover - Located on the left side portion of the top cover
  • RB2-5664-000CNTray 1/MP Tray cable cover
  • RB2-5676-000CNTray 1 blanking cover
  • RB2-5682-000CNLower right front corner cover for tray 2 and 3
  • RB2-5683-000CNLower left front corner cover for tray 2 and 3 - Does not include power button
  • RB2-5684-000CNRight rear cover - small cover strip on rear side of right cover assembly
  • RB2-5685-000CNLeft back cover - Narrow strip covering the left rear corner of the printer
  • RB2-5687-000CNLower left cover - Smaller plastic piece below left door and diverter assembly
  • RB2-5689-000CNLower right cover - Small plastic piece below right door assembly
  • RB2-5697-000CNRight front inside corner cover
  • RB2-6491-000CNLeft upper cover - Small piece above left door
  • RB2-7331-000CNRight front cover - Thin vertical plastic cover - Mounts on the right front of the printer
  • RB2-7332-000CNTop right cover - Cover on right side above Tray 1 - (Part approaching End of Life, please contact HP for availability)
  • RB2-7335-000CNLeft front cover - Small vertical piece on left side of left cover assembly
  • RB2-7336-000CNLeft upper cover assembly
  • RB2-7352-000CNCover - Right side rear corner of printer cover
  • RB2-7444-000CNTransfer cable cover - Protects ITB and secondary transfer roller cables from ITB lift mechanism
  • RB2-7445-000CNTransfer roller assembly cover - Front cover of secondary transfer roller assembly
  • RB2-7531-000CNRail cover - Fits over guide for left side of ITB assembly - protects ITB sensors
  • RB2-7648-040CNFront cover and handle asembly - Plastic cover the protects the fornt side of the 2,000-sheet paper feeder tray 4 assembly
  • RB2-7649-000CNRight cover for the 2,000-sheet paper feeder assembly
  • RB2-7650-000CNRight rear cover for the 2,000-sheet paper feeder assembly
  • RB2-7651-000CNLeft rear cover for the 2,000-sheet paper feeder assembly
  • RB2-7652-000CNTop cover for the 2,000-sheet paper feeder assembly
  • RB2-7902-000CNFlatbed ADF scanner lens cover - Black plastic piece that clips over bottom of scanner lens
  • RB2-7933-000CNLower front cover - Bottom of the protrusion that makes up the control panel housing - Mounts to the front of the scanner assembly
  • RB2-7934-000CNUpper front cover - Top of the protrusion that makes up the control panel housing - Mounts to the front of the scanner assembly
  • RB2-8031-000CNCable cover (Black plastic) - Covers and protects the cables on the front side of the ADF main assembly
  • RB2-8048-000CNADF assembly front cover - Mounts on the end of the ADF main assembly structure
  • RB2-8054-000CNLeft side cover - Serves as the mounting bracket for the ADF paper output tray - Mounts on the upper left side of the scanner assembly
  • RB2-8060-000CNConnector cover - Small rectangular piece that extends out from the back of the scanner assembly (two used)
  • RB2-8063-000CNRight side cover - 'L' shaped rectangular cover for the right end of the scanner assembly
  • RB2-8692-000CNADF scanner lens cover - Black plastic piece that clips over top of scanner lens
  • RB3-0287-000CNFront cover - Plastic front cover for pedestal assembly
  • RB3-0289-000CNLeft cover - Left side cover for pedestal assembly
  • RC1-0821-000CNTop rear cover - Slightly curved plastic piece - Mounts just behind the paper loading access door
  • RC1-0822-000CNLeft cover - Large rectangular cover held in place with four screws - Mounts on the printer side of the high capacity input tray
  • RC1-0822-020CNLeft cover - Large rectangular cover held in place with four screws - Mounts on the printer side of the high capacity input tray
  • RC1-0823-000CNLeft front cover - Narrow rectangular cover - Mounts on the printer side of the high capacity input tray
  • RC1-0825-000CNRight cover - Narrow rectangular cover - Mounts next to the pull-down paper access door
  • RC1-0826-000CNLower right cover - Trim piece below the pull-down paper loading access door
  • RC1-0827-000CNRear cover - Large rectangular cover held in place with four screws - Mounts next to where the power and interface cables exit the high capacity input tray
  • RC1-0827-020CNRear cover - Large rectangular cover held in place with four screws - Mounts next to where the power and interface cables exit the high capacity input tray
  • RC1-0884-000CNCam cover - Covers the (right) door sensing arm - Mounts on the inside rear side wall of the paper tray assembly
  • RF5-3555-000CNFan hood - Rear fan and filter cover
  • RF5-3644-000CNRear center cover for the 2,000-sheet paper feeder assembly
  • RF5-3644-020CNRear center cover for the 2,000-sheet paper feeder assembly
  • RF5-3645-000CNLeft cover for the 2,000-sheet paper feeder assembly
  • RF5-3674-000CNRoller cover - Covers the exit delivery roller on the left side of the scanner assembly
  • RF5-3695-000CNWhiteboard cover assembly - White padded sheet mounted on a rectangular support cover - Mounts on the under side of the ADF assembly/scanner lid
  • RF5-3695-030CNWhiteboard cover assembly - White padded sheet mounted on a rectangular support cover - Mounts on the under side of the ADF assembly/scanner lid
  • RF5-4254-000CNRight cover - Right side cover for pedestal assembly
  • RG5-5701-000CNRear cover assembly
  • RG5-5702-000CNFront cover assembly - Large door above trays 2 and 3
  • RG5-5702-050CNFront cover assembly - Large door above trays 2 and 3
  • RG5-5705-000CNLeft upper cover - Small cover above left door
  • RG5-5705-030CNLeft upper cover - Small cover above left door
  • RG5-5706-000CNLeft upper cover assembly - Small rectangular cover that mounts between the top of the printer and the paper output tray
  • RG5-5721-000CNFront inside cover - Cover behind front drop down cover
  • RG5-5737-000CNRight cover assembly - Includes all components attached to this door
  • RG5-5737-090CNRight cover assembly - Includes all components attached to this door
  • RG5-5811-040CNService cover assembly - Cover for pickup and separation rollers
  • RG5-6042-030CNRear cover assembly - Rear cover of printer with air filters
  • RG5-6042-050CNRear cover assembly - Rear cover of printer with air filters
  • RG5-6111-000CNLeft rear cover assembly - Cover for left rear corner with power receptical opening
  • RG5-6149-070CNDelivery cover assembly - Lower left door assembly - With face-up output roller and flapper/diverter
  • RG5-6149-100CNLeft front cover assembly
  • RG5-6149-130CNLeft front cover assembly
  • RG5-6191-000CNDelivery cover assembly - Mounts on the upper left side of the print engine frame assembly
  • RG5-6191-050CNDelivery cover assembly - Mounts on the upper left side of the print engine frame assembly
  • RG5-6272-000CNADF base cover assembly - Bottom half of ADF assembly that sits on top of flatbed scanner
  • RG5-6272-050CNADF base cover assembly - Includes the large bottom rectangular support cover for the ADF assembly with front and rear tray guides, the ADF intermediate PC board, cables, sensors, and hinges
  • RG5-6315-000CNRear ADF cover assembly - Includes the rear ADF electronics cover and the two hinge covers
  • RG5-6982-000CNRear cover assy
  • RG5-6982-020CNRear cover assembly - Rear plastic pedestal cover with input side cover
  • RL1-0242-000CNRear cover - Large rectangular cover held in place with four screws - Mounts next to where the power and interface cables exit the high capacity input tray
  • RM1-0403-020CNFront cover assembly - Large plastic cover with the light pipe for the operating LED
  • RM1-0404-000CNTop cover assembly - Incluedes the rectangular cover and lift-up paper loading access door
  • RM1-0404-020CNTop cover assembly - Incluedes the rectangular cover and lift-up paper loading access door
  • RM1-0406-000CNRear left cover assembly - Includes the rear left corner cover and the three service LED light pipes - Has a cutout for the power cord and interface cable
bottom bar