| Part |
Picture |
Description |
| RG5-0108-000CN |
Cable assembly - From DC controller to paper input board |
| RG5-0109-000CN |
Cable assembly - From DC controller to duplex board |
| RG5-0116-000CN |
Output door sensor assembly |
| RG5-0120-000CN |
Front cover assembly - Has holes for paper trays and control panel |
| RG5-0121-000CN |
Front upper cover (L-shaped) - Covers the top front and the top right |
| RG5-0122-000CN |
Left side cover - Has cutout for duplex access door |
| RG5-0128-000CN |
Power switch button |
| RG5-0130-000CN |
Cable assembly - From DC controller to formatter board |
| RG5-0141-000CN |
Transfer charge roller (Black) - Held in place w/ blue clip |
| RG5-0156-030CN |
Cable assembly for HP LaserJet 4Si Series |
| RG5-0161-090CN |
Registration assembly - Next set of rollers after paper pickup |
| RG5-0162-000CN |
Control panel assembly - Includes display and keypad |
| RG5-0163-000CN |
Front upper cover (L-shaped) - Covers the top front and the top right |
| RG5-0164-000CN |
AC power supply/sensor board - 120VAC, 60Hz |
| RG5-0165-000CN |
AC power supply/sensor board - 240VAC, 50Hz |
| RG5-0166-060CN |
AC power supply - 120VAC, 60Hz |
| RG5-0167-060CN |
AC power supply - 240VAC, 50Hz |
| RG5-0168-000CN |
DC power supply assembly - 120VAC, 60Hz |
| RG5-0169-000CN |
DC power supply assembly - 240VAC, 50Hz |
| RG5-0170-080CN |
High voltage power supply assembly (transformer) |
| RG5-0171-000CN |
Replacement top cover |
| RG5-0172-000CN |
Replacement top cover |
| RG5-0174-000CN |
Front cover assembly - Has holes for paper trays and control panel |
| RG5-0194-000CN |
Registration roller (Metal) - Includes gear on left end |
| RG5-0198-000CN |
Face-down delivery roller assembly - Shaft with 6 rubber rollers - Last rollers before paper is output to top of printer |
| RG5-0231-000CN |
Front cover connect board - Located behind left side of front door - Has delivery unit paper sensor (PS401) and door open sensor (PS402) |
| RG5-0239-000CN |
Cable - From DC controller board to cassette size sensor board and front cover connect board |
| RG5-0381-260CN |
Job Offset Assy - Top Cover Paper Delivery Assembly |
| RG5-0449-000CN |
Laser/scanner assembly |
| RG5-0451-000CN |
Paper Pickup (Feeder) Assembly (Motor Driven) - Mounts in |
| RG5-0454-000CN |
Fuser Assembly (120V, 60Hz) - Bonds Toner to Paper by Heat |
| RG5-0454-060CN |
Fuser Assembly (120V, 60Hz) - Bonds toner to paper by heat |
| RG5-0456-180CN |
Paper output assembly - Belt driven |
| RG5-0457-000CN |
Gear cluster (drive train) assembly |
| RG5-0458-000CN |
Top cover assembly - Includes hinges, top cover, and top door |
| RG5-0459-000CN |
Right front cover assembly - Includes spring loaded font door |
| RG5-0466-000CN |
Leading edge registration sensor and PC paper out sensor |
| RG5-0467-060CN |
Tray 1 base assembly - Attachment point for MP input tray |
| RG5-0468-000CN |
Transfer guide assembly - Ribbed paper guide for the high voltage transfer roller (Does NOT include transfer roller) |
| RG5-0469-020CN |
Transfer guide assembly - Plate between toner cartridge and Fuser Assembly |
| RG5-0472-000CN |
Multi-Purpose input tray - Attaches to front door |
| RG5-0474-000CN |
Thermoswitch assembly (fuser temperature switch) - At end of fusing roller |
| RG5-0475-060CN |
Paper exit (Delivery) sensor assembly |
| RG5-0478-000CN |
Control panel assembly (for 220V/240V operation ONLY) - Includes the display (Overlay NOT included) |
| RG5-0481-000CN |
Lower cassette drive assembly (drive motor and gears) |
| RG5-0511-000CN |
DC Controller PCB (Printed Circuit Board) Assembly. It functions as the central electronic brain of the printer managing power distribution motor operations sensor signals and overall communication between the printer and your computer. |
| RG5-0512-070CN |
Paper control board - On right side of paper feed assembly |
| RG5-0513-000CN |
High voltage power supply assembly PCA |
| RG5-0514-000CN |
Sensor board - Narrow board w/ sensors |
| RG5-0515-000CN |
Interconnect board - Includes cable to A/C power module - Connects DC controller and high voltage power supply to Fuser Assembly |
| RG5-0519-000CN |
Cable assembly for HP LaserJet 4 Series |
| RG5-0520-000CN |
Cable assembly - From DC controller to scanner assembly |
| RG5-0521-000CN |
Cable assembly for HP LaserJet 4 Series |
| RG5-0522-000CN |
Cable assembly - From DC controller to delivery sensor (PS3) |
| RG5-0524-000CN |
Cable assembly - From DC controller to paper control board |
| RG5-0526-000CN |
Cable assembly - From DC controller to AC power supply |
| RG5-0529-000CN |
Cable assembly for HP LaserJet 4 |
| RG5-0530-000CN |
Cable assembly - From paper control board to connector for the optional lower cassette sheet feeder assembly |
| RG5-0533-000CN |
Control panel assembly (for 100V/120V operation) - Includes the display and an english overlay |
| RG5-0538-000CN |
Cable assembly - From DC controller to main motor |
| RG5-0541-000CN |
Drive board for HP LaserJet 4 Series |
| RG5-0553-000CN |
Power supply assembly - 220/240VAC |
| RG5-0556-000CN |
Cable assembly - From DC controller to laser assembly |
| RG5-0662-140CN |
Laser/scanner assembly |
| RG5-0667-000CN |
Beam to drum mirror assembly |
| RG5-0668-000CN |
Paper pickup assembly - Includes D-shaped roller RB1-3029-000CN. |
| RG5-0669-000CN |
Front oblique roller assembly - Located on front left in paper feed area |
| RG5-0670-000CN |
Top oblique roller assembly - Top/front guide with roller on left (ORDER RG5-0711-020CN) |
| RG5-0671-000CN |
Feeder guide assembly - Ribbed plastic plate with sensor lever |
| RG5-0672-000CN |
Toner cartridge lever (White) - On left side of feeder guide |
| RG5-0674-000CN |
Left mounting block - For transfer guide assembly |
| RG5-0675-000CN |
Right mounting block - For transfer guide assembly |
| RG5-0676-000CN |
HP Fuser Assembly (110V) for LaserJet 4L/4M/4P Series Printers |
| RG5-0676-390CN |
Fuser Assembly (120V, 60Hz) - Bonds Toner to Paper by Heat |
| RG5-0677-000CN |
Fuser Assembly (240V, 50Hz) - Bonds toner to paper by heat |
| RG5-0678-000CN |
Fusing roller assembly - Includes heating element and teflon sleeve - For 100V/120V operation |
| RG5-0679-000CN |
Fusing roller assembly - Includes heating element and teflon sleeve - For 220V/240V operation |
| RG5-0681-000CN |
Delivery assembly - Plastic guide with two spring loaded rollers |
| RG5-0682-000CN |
Unknown Keyword for LaserJet 4P Series |
| RG5-0682-030CN |
Lower roller assembly (L-shaped) - For top cover output |
| RG5-0683-000CN |
Unknown Keyword for LaserJet 4P Series |
| RG5-0683-020CN |
Upper roller - Shaft with 4 rollers - For top cover output |
| RG5-0684-000CN |
Gear drive train plate assembly - 12 gears mounted on side plate |
| RG5-0691-000CN |
Rear door assembly - With paper pawl - For top or rear output |
| RG5-0700-000CN |
DC controller case assembly - Includes bottom aluminum shield |
| RG5-0701-000CN |
High voltage toner cartridge connector assembly |
| RG5-0702-000CN |
Transfer guide assembly - Metal plate in front of transfer roller |
| RG5-0703-000CN |
Tubeaxial fan for HP LaserJet 4ML Series |
| RG5-0707-000CN |
DC controller/power supply board - For 100V, 50Hz operation |
| RG5-0708-000CN |
DC controller/power supply board - For 220V, 60Hz operation |
| RG5-0711-020CN |
Top oblique roller assembly - Top/front guide with roller on left |
| RG5-0721-000CN |
Main cover (one piece) assembly - Top and all sides |
| RG5-0722-000CN |
Fuser Assembly (100V, 50Hz) - Bonds toner to paper by heat |
| RG5-0723-000CN |
Fusing roller assembly - Includes heating element and teflon sleeve - For 100V operation |
| RG5-0753-000CN |
DC controller/power supply board - For 120V, 60Hz operation |
| RG5-0764-000CN |
Unknown Keyword for LaserJet 4P Series |
| RG5-0765-000CN |
Main motor assembly - Comes with drive gear installed - Gear not available separately |
| RG5-0766-030CN |
Scanner connector assembly - Scanner to DC controller board |
| RG5-0767-000CN |
DC controller/power supply board - For 240V, 50Hz operation |
| RG5-0791-000CN |
Gear drive train plate assembly - 13 gears mounted on side plate |
| RG5-0796-000CN |
Paper pickup assembly - Includes D-Shaped roller |
| RG5-0800-000CN |
Unknown Keyword for LaserJet 4P Series |
| RG5-0800-030CN |
Laser/Scanner Assembly - Mounts on Top of Print Structure |
| RG5-0802-000CN |
Mirror assembly - Top, center of internal chassis |
| RG5-0804-000CN |
Unknown Keyword for LaserJet 4P Series |
| RG5-0805-000CN |
Power switch assembly - AC input, power switch, and power switch holder - Also includes interconnecting cables |
| RG5-0815-000CN |
Cable assembly for HP LaserJet 4P Series |
| RG5-0816-000CN |
Control panel/display board - Includes the display and eight push button switches |
| RG5-0822-000CN |
DC Controller/Power Supply Board - For 120V, 60Hz Operation |
| RG5-0823-000CN |
DC controller/power supply board - For 240V, 50Hz operation |
| RG5-0842-000CN |
DC controller board |
