Partshere Shopping Cart Lexmark and HP New Oem and refurb parts
top bar

Printer parts diagram for: C2890-60081

 

C2890-60081 is represented by #6 in the diagram below.

C2890-60081 is represented by #6 in the diagram below.
1
C2890-60082 Carriage Carriage assembly - Includes flex cable and bushings
10
C2124-60115 Motor Carriage motor - Drives the carriage belt
11
C2890-60238 Cable Paper motor power cable
13
1480-1023 Shaft Idler shaft (dowel pin)
14
C2890-60078 Actuator Clutch actuator
15
C2171-67806 Idler Idler pulley - Holds left end of carriage belt
16
C2890-60083 PC Board Pen driver PC board
18
C2890-60079 Holder Flex cable holder - Used to ensure the flex cable bends correctly when carriage is in home position
19
C2170-00002 Retainer Carriage rod retainer - Holds left end of carriage rod
20
C2890-60049 Plate Pressure Plate Assembly - Holds media to be printed against the paper input feed rollers
21
C2128-00003 Spring Helper spring - Used to lift the pressure plate assembly
22
C2890-40070 Arm Lever arm - Used to lift the pressure plate lifter
23
C2890-20006 Spring Lever arm spring - Provides tension between the lever arm and the pressure plate lifter
24
C2890-40071 Lifter Separator lifter - Installed between the separator and the pressure plate lifter
25
C2890-40068 Cap Left/right lifter cap - Holds the pressure plate lifter in place
26
C2890-40075 Cap Center lifter cap - Holds the pressure plate lifter and the kicker spring in place
28
C2890-40072 Peg Separator peg - Lifts the separator pad when the lifter shaft lifts
29
C2890-60052 Chassis Print mechanism chassis assembly - The base structure of the print mechanism
30
C2124-20011 Spring Pre-loader spring
32
C2890-40063 Bracket Belt tension bracket - Holds the carriage belt idler pulley
34
C2890-40076 Adjuster Adjuster - Used to adjust pen-to-paper spacing
35
C2890-40073 Kicker Kicker - Restacks the paper in the paper input tray after the top sheet is removed
38
C2890-60076 Roller Pivot assembly - Large plastic item with large rollers - Picks and feeds media through print mechanism
39
C4549-00002 Guide Paper guide - Holds the upper pinch rollers and springs
4
C2890-80026 Absorber Ink absorber for HP OfficeJet 330 Series
44
C2890-60023 Cable Pen driver ribbon cable - 27cm (10.5in) long
48
C2890-40067 Limiter Rotation limiter - Limits the rotation of the pivot
49
9170-1618 Toroid Toroid for pen driver cable
50
C2113-40006 Wiper Wiper - Cleans ink and debris from print nozzles
51
C2890-40108 Flag OOPS flag - Media sensor - Mounts on top of the paper guide between the right and center pinch rollers
52
C2890-40077 Sensor Envelope sensor
53
C2890-69177 Print Mechanism Print mechanism - Does not include automatic document feeder parts, paper drive assembly parts, scanner parts, or trays
6
C2890-60081 Spitton Spittoon assembly - Includes absorber
7
C2890-60084 Sled Sled assembly - White plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - Mounts on top of the service station assembly
8
C2890-60080 Service Station Service station assembly - Includes service station base (frame) and sled retainer
9
C2128-00051 Damper Carriage belt damper - Installed under right end of carriage belt
bottom bar