HP Color LaserJet 2820 all-in-one (Q3948A)
MFG Part Number: Q3948A
19ppm black, 4ppm color, Ethernet, USB 2.0
-
Printer Support Linksshow
Supplies parts for Q3948A HP Color LaserJet 2820 all-in-one Printer
6R1285
Cartridge - Yield black toner
6R1286
Cartridge - Yield cyan toner
6R1287
Cartridge - Yield yellow toner
6R1288
Cartridge - Yield magenta toner
Q3948-60140
Roller - ADF pick roller assembly - Includes two rollers in a bracket assembly - Moves the first few top pages of the input stack where the top page is picked off and feed to the pre-scan drive rollers - Mounts in the middle of the ADF assembly
Q3948-67903
Roller - ADF pick roller assembly - Includes two rollers in a bracket assembly - Moves the first few top pages of the input stack where the top page is picked off and feed to the pre-scan drive rollers - Mounts in the middle of the ADF assembly
Q3948-67904
Roller - ADF pick roller assembly replacement kit - Includes the pickup roller assembly (two rollers in a bracket), separation pad, mounting screws, and illustrated replacement instructions
Q3948-67907
Roller - Paper pickup roller replacement kit - Includes the pickup roller (`D` shaped roller), separation pad, and illustrated instructions - Picks paper from the multipurpose front input tray (tray 1)
Q3948-67912
Roller - Paper pickup roller kit - Includes the `D` shaped the paper pickup roller assembly and the separation pad assembly - For the multipurpose front input tray (tray 1)
Q3948-67917
Roller - Upper face-down pressure roller kit - Includes the two small Black hard plastic rollers and corresponding torsion springs
Q3948-67920
Roller - Transfer roller kit - Includes the transfer roller, two transfer side plates ('U' shaped metal inserts), the right end shaft bushing, and the two compression springs at the left end of the roller
Q3948-67922
Roller - Lower face-down pressure roller kit - Includes the two small Black hard plastic rollers and corresponding torsion springs
Q3964-67901
Drum - Imaging drum/transfer assembly cartridge - Inserts into printer through the top door - Life expectancy is 20,000 pages for black print ONLY, 5,000 pages for color (typical combined life is approximately 8,000 to 10,000 pages)
Q3964A
Drum - Imaging drum/transfer assembly cartridge - Inserts into printer through the top door - Life expectancy is 20,000 pages for black print only, 5,000 pages for color (typical combined life is approximately 8,000 to 10,000 pages)
RB2-2904-000CN
Roller - Guide roller (free spinning white plastic roller) - Mounts on the paper pickup drive shaft on each side of the pickup 'D' shaped roller
RB2-7195-000CN
Roller - Sensor flag roller (small White plastic roller)
RB2-9909-000CN
Roller - Pressure roller (small Black hard plastic 'solid' roller)
RB2-9950-000CN
Roller - Pinch-roller - Small roller mounted on a shaft
RB3-0012-000CN
Roller - Belt roller - Small oval shaped roller approximately 1-3/4 inches long
RB3-0129-000CN
Roller - Feed roller assembly - Includes the metal shaft and two small rubber rollers
RB3-0129-020CN
Roller - Feed roller assembly - Includes the metal shaft and two small rubber rollers - Feeds paper from the paper cassette (or tray three below) into the printer - Mounts on the top of the center frame in the base on the 250-sheet input tray assembly
RB3-0161-000CN
Roller - Paper pickup roller assembly - Includes the 'D' shaped rubber roller on a plastic shaft
RB3-1034-000CN
Roller - Pressure roller assembly - Hard rubber roller on a metal drive shaft
RF5-4035-000CN
Roller - Pressure roller and arm assembly - Includes the small white roller, the holding arm, and roller scraper
RF5-4067-030CN
Roller - Transfer roller assembly - Long black foam type roller - Transfers static charge to paper
RF5-4068-000CN
Roller - Pressure roller (small Black hard plastic 'solid' roller)
RG5-6939-020CN
Roller - Registration roller assembly - Includes the roller, bushings, mounting plate, paper sensor, and the sensor flag
RG5-6952-000CN
Roller - Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1)
RG5-6952-020CN
Roller - Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1) - Mounts in the lower portion of the front frame assembly
RG5-7162-000CN
Roller - Fusing film assembly (for 110VAC to 127VAC operation) - Includes the heater assembly and the fusing film tube
RG5-7162-030CN
Roller - Fusing film assembly (for 110VAC to 127VAC operation) - Includes the heater assembly and the fusing film tube
RG5-7163-000CN
Roller - Fusing film assembly (for 220VAC to 240VAC operation) - Includes the heater assembly and the fusing film tube
RG5-7163-030CN
Roller - Fusing film assembly (for 220VAC to 240VAC operation) - Includes the heater assembly and the fusing film tube
RG5-7595-000CN
Roller - Lower top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, and the drive gear
RG5-7602-000CN
Fuser Assembly - Fuser Assembly - Includes the fusing mechanism, lower rear cover (with the two locking levers), and the rear cover / face-up output tray - Bonds the toner to the paper with heat - For 110V to 127VAC operation
RG5-7602-070CN
Fuser Assembly - FIXING ASSY 110-127V Fuser Assembly - Includes the fusing mechanism, lower rear cover (with the two locking levers), and the rear cover/face-up output tray - Bonds the toner to the paper with heat - For 110V to 127VAC operation
RG5-7603-000CN
Fuser Assembly - Fuser Assembly - Includes the fusing mechanism, lower rear cover (with the two locking levers), and the rear cover / face-up output tray - Bonds the toner to the paper with heat - For 220V to 240VAC operation
RG5-7603-070CN
Fuser Assembly - Fuser Assembly - Includes the fusing mechanism, lower rear cover (with the two locking levers), and the rear cover / face-up output tray - Bonds the toner to the paper with heat - For 220V to 240VAC operation
RG5-7603-080CN
Fuser Assembly - Fuser Assembly - Includes the fusing mechanism, lower rear cover (with the two locking levers), and the rear cover / face-up output tray - Bonds the toner to the paper with heat - For 220V to 240VAC operation
RG5-7637-000CN
Roller - Upper top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, two anti-reversing flaps, and the drive gear
Color LaserJet 2820 all-in-one Printer parts list