Partshere Shopping Cart Lexmark and HP New Oem and refurb parts
top bar

Printer parts diagram for: C2145-40023

 

C2145-40023 is represented by #34 in the diagram below.

C2145-40023 is represented by #34 in the diagram below.
1
C2145-00042 Stiffener Encoder stiffener - Prevents oscillation of encoder strip
10
C4602-00012 Spring Bias spring - Provides down pressure on the clutch actuator arm
11
C4555-40005 Guide Lower paper guide
12
C4555-67849 Plate Carriage Plate Assembly - Includes Carriage Plate, Upper Paper Guide, Antistatic Brush, Pivot Stop Adjuster, and Z Axis Service Station Adjustment (ZASSA)
13
C2145-40058 Belt Drive belt - For the print mechanism carriage assembly
14
C2145-00046 Spring Pivot spring - Provides tension for the pivot
15
C2145-40059 Adjuster Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
16
C4602-40013 Gear PPR cluster gear
17
C2145-40101 Clamp Right pivot clamp (Right Z-STOP) - Holds the right end of the pivot assembly in place
18
C4555-00002 Ground Paper motor ground strap
19
C4555-67805 Preloader Drive roller pre-loader - Applies tension to the drive roller shaft
2
C2145-40117 Clamp Left pivot clamp (Left Z-STOP) - Holds the left end of the pivot assembly in place
20
C4602-67804 Roller Pickup roller assembly (Pivot) - Picks paper from paper input tray
21
C4602-60004 Motor Paper motor - Drives paper through printer
22
C4602-60040 PC Board Carriage PC board - Does not include trailing cable
23
C2128-80075 Pad Foam catch pad - Keeps paper catch from moving inadvertently
24
C4602-40036 Clamp Belt clamp (attachment) - Secures the drive belt to carriage
25
C2145-00018 Spring Encoder spring - Provides tension for the encoder strip and grounds the carriage rod to the carriage plate
26
C4602-00014 Plate Bearing Plate - Provides smooth surface for Clutch Actuator to ride against
27
C2145-00044 Spring Carriage rod spring
28
C2145-40118 Guide Pre-guide (For envelopes)
29
C4602-80004 Cable Head drive flex cable - 43.2cm (17in) long
3
C4555-40008 Flag Envelope sensor flag
30
C5876-60103 Cable Cable assembly with ferrites - 15-pin (F) connector to a 35.6cm (14in) cable with a 6-pin (F) connector, a 38.1cm (15in) cable with a 3-pin (F) connector, and a 43.2cm (17in) cable with a 6-pin (F) connector
31
C5876-60066 Motor Service station motor - Drives the service station assembly
33
C2145-40020 Arm Lever arm - Provides linkage between the pivot assembly and the pressure plate lifter
34
C2145-40023 Kicker Kicker - Restacks the paper in the paper input tray after the top sheet is removed
37
C2145-67851 Carriage Carriage assembly - Does not include trailing cable
4
C4602-60022 Shield Carriage motor - Provides power for carriage belt
40
C2145-40022 Link Separator link (Separator peg)
41
C2145-20007 Rod Carriage rod - Shaft that the carriage assembly rides on
45
C2145-40019 Lifter Pressure plate lifter - Also known as lifter shaft or paper lifter
47
C4555-60086 Separator Separator assembly
48
C4602-69801 Print Mechanism Complete mechanism - Includes mechanical carriage movement, paper picking, and service station operations
5
C2145-40064 Flag OOPS flag - Out of paper sensor
6
C4602-40039 Arm Clutch actuator arm - Used to engage the pivot gears
7
C4555-60068 Turnaround Assembly Turnaround assembly - Holds belt tension components in place
8
C4555-60067 Idler Carriage belt idler wheel assembly - Includes: idler mount, pulley, ball bearing and idler axle
9
C2145-80016 Strip Encoder strip - Carriage position sensor reference
bottom bar