1. Use SmartSearch
2. Use Part Number Search
3.MultiSearch AvailableIs your Carriage an HP PART * TONER * PRINTER ? If you know your part number, please enter it on the search box above.
| Part | Description |
| 174958-991PX | Shuttle assembly (complete) for the LPQ 1000 series - Has 60 hammers |
| 174959-991PX | Shuttle assembly (complete) for the LPQ 1500 series - Has 102 hammers |
| 174957-991PX | Shuttle assembly (complete) for the LP/Q 500 series (C models) - Has 28 hammers |
| 158338-991PX | Shuttle assembly (complete) for the LP/Q 500 series - Has 28 hammers |
| RB2-5640-000CN | Laser shutter - Cartridge shutter actuator - Piece that opens cartridge shutter as it is inserted into the printer |
| RB1-2080-000CN | Laser shutter - Attaches to bottom of laser/scanner assembly |
| RG1-0929-000CN | Mirror shutter assembly - Mounts on the top cover above the toner cartridge |
| RC1-7163-000CN | SHUTTER FIXING |
| RG5-6940-050CN | Registration shutter assembly - Includes the metal roller, mounting frame, grounding springs, and the dual coupling gear |
| RG5-6286-000CN | Shutter assembly - Long Black plastic shaft with two curved finger-like tangs - Acts as a paper stop and helps align paper entering the ADF assembly - Mounts just to the right of the paper pickup roller in the ADF paper pickup assembly |
| RM1-0053-000CN | Left side shutter assembly - Blocks light from scanner on left side |
| RM1-0054-000CN | Right side shutter assembly - Blocks light from scanner on right side |
| C2356-60510 | Sound shroud - Attaches where paper exits to reduce noise |
| 02564-60005 | Shock (Gas spring) - Holds up top cover lid |
| 55020285KT | Shock (Gas spring) - Holds up duplex mechanism top cover |
| 107961-905PX | Gas charged spring kit, holds up the top cover when open - Includes the mounting hardware |
| 55020257KT | Right front shock - Supports duplex mechanism when opened |
| 55020019KT | Right rear shock - Supports duplex mechanism when opened |
| 5184-2834 | TIJ 3.0 Generic Warranty Return kit |
| Q5693-60513 | PACKAGING KIT |
| 5184-2832 | Warranty return kit |
| 5183-5268 | Return kit with box and instructions - For returning defective Thermal InkJet (TIJ) 2.5 InkJet cartridges (USA) |
| 5960-8286 | Final exam return envelopes - Contains 10 envelopes |
| C4820-80100 | Ink system return kit (box and instructions) - For returning printheads, printhead cleaner, and ink cartridges |
| C4785-60513 | Repackaging kit |
| 5184-2833 | Return kit with box and instructions - For returning defective Thermal InkJet (TIJ) 2.5 InkJet cartridges (not USA) |
| C3195-00031 | Repackaging kit - For stand/legs of plotter |
| 5184-0986KT | Re-packing kit for returning the HP2500C printer for repair |
| Q2472-67901 | Return service packaging kit - Contains new box with top and bottom foam set, plastic bag for printer and instruction sheet |
| C3196-00031 | Repackaging kit - For stand/legs of plotter |
| C6455-60057 | Shift plate assembly - Five plastic gears held in a two piece plastic frame - Attaches to feedroller assembly |
| C6090-60180 | Shield kit (EMC covers) - Electromagnetic Shields Installed Behind and Below the Electronics Module Base - 42 inches |
| 02564-00002 | Ribbon shield - Attached to print bar by four screws |
| C3137-00001 | Formatter PC board RFI shield - Mounts over the formatter board |
| C2801-80007 | Decurler roller wrap shield |
| C2621-60207 | ESD shield for power supply board |
| C2688-67081 | Connector board shield |
| C2890-60291 | Main PC board shield |
| C3948-00002 | RFI shield |
| C4170-60101 | Formatter board RFI shield |
| C3195-80005 | RFI shield (Gasket) - Braided shield with adhesive strip attached to electronic housing |
| C2890-40107 | Power supply shield |
| C2890-00074 | Centronics connector shield |
| C3150-00005 | Formatter (Main logic) board shield |
| C3980-00007 | Formatter board RFI shield |
| C2697-67010 | ESD shield for power supply board |
| C5876-00001 | Top EMI shield |
| Q1261-60035 | Roller shield |
| C5876-00002 | Bottom EMI shield |
| C5876-00004 | Shield (Face plate) - Has cutout for Centronics connector |
| C7044-00001 | RFI shield |
| C4557-00038 | Paper motor ESD shield |
| C9124-00003 | RFI shield - Metal plate that covers the formatter PC board |
| C5316-80004 | Main PC board shield |
| C6680-00041 | Main PC board shield (Upper) |
| C9124-00002 | RFI sheild for the scanner controller PC board assembly |
| C5300-00022 | Fan finger guard (shield) - Mounts on the back side of the fan and fan gasket |
| C5374-40050 | Scanner CCD PC board shield |
| Q1334-00001 | RFI shield - Metal plate that covers the formatter PC board |
| C6680-60058 | Main PC board shield (Lower) |
| C4704-40050 | SIMM module shield |
| C4555-00006 | EMI shield |
| C6409-00007 | Main logic PCA EMI shield |
| C4602-00008 | Connector liner |
| Q2660-00002 | Upper RFI shield |
| PA03002-C202FJ | RFI cover shield for PC boards |
| Q2676-00002 | RFI shield plate |
| C4557-00040 | Main logic board EMI shield |
| RC1-5776-000CN | Cover shield - RFI cover shield |
| RC1-5778-000CN | Cover shield - RFI shield for cable that runs between Formatter PCA and paper scanner on top of printer |
| RC1-5779-000CN | Cover shield - Located on upper rear of printer |
| RB1-6749-000CN | Internal cover for Tray 1 pickup assembly |
| RB3-0136-020CN | Solenoid cover/magnetic shield |
| RB2-9932-000CN | RFI shield - Parallel wire form mounted over the fan |
| RF5-0471-000CN | Formatter RFI shield |
| RB1-2987-020CN | High voltage shield - Has cutout for modified paper sensor arm |
| Q7286-00007 | Shield for carriage PCA |
| Q5888-00003 | MPCA shield |
| Q7286-00003 | Shield (ERIDANI) |
| 02276-80095 | Font cartridge shield - Inner metal 'box' for cartridge slot |
| RC1-7599-000CN | PC board shield - Driver PC board shield - Black plastic piece that covers Driver PCA |
| RF5-0746-000CN | Formatter RFI shield |
| RF5-2678-000CN | Formatter board EMI shield |
| RG5-3023-000CN | Formatter board shield case assembly |
| RF5-2664-000CN | Back shield - Reinforcement plate |
| RF5-1647-000CN | Formatter board EMI shield |
| RF5-1466-000CN | Formatter board EMI shield |
| C2801-80021 | Paper feeder support shelf |
| C9017-90091 | Top Cover Eratta Sheet |
| RM1-0055-000CN | Paper feed shaft assembly - Not available as an assembly - Order feed roller shaft, pickup arm holder, pickup arm, pickup arm compression spring and Tray 2 sensor |
| RM1-0533-000CN | Paper pickup shaft assembly - Includes the shaft, the two cams, pickup roller holder, and end cap |
| 07550-60087 | Grit wheel shaft assembly with 2 grit wheels - For paper drive |
| RA1-7655-000CN | Pickup roller shaft - Does NOT include any 'D-shaped' rollers |
| 02563-20003 | Tractor guide shaft - Through center of both tractors |
| 02563-20002 | Tractor drive shaft - Through top of both tractors |
| RU5-0158-000CN | Paper feed drive shaft - Connects main drive to paper feed drive assembly |
| 07550-60049 | Paper pickup drive shaft assembly (Has two 'D' shaped rollers) - Feeds paper from the tray |
| WG8-5362-000CN | Paper feed shaft assembly - Not available as an assembly - Order feed roller shaft, pickup arm holder, pickup arm, pickup arm compression spring and Tray 2 sensor |
| C2848-60032 | Pincharm shaft assembly - Includes cam journals mounted on each end |
| C3764-60516 | Hex shaft in jam access door assembly |
| C2642-60222 | Lower (Main) carriage shaft - Support for lower half of carriage |
| C2684-60311 | Pick shaft assembly - Shaft with two long rollers on large plate installed under pick roller - Does not include the plate |
| C2642-60223 | Upper (Secondary) carriage rod - Supports upper half of carriage |
| C2114-20001 | Idler shaft (New style) |
| C4557-40066 | Drive shaft with molded gears on each end |
| C5374-40038 | Feed roller shaft - Installed over lower ADF feed roller |
| C4723-60240 | Pincharm shaft assembly - Includes cam journals mounted on each end |
| C4557-20027 | Cartridge latch shaft near top of carriage |
| C4530-20042 | Carriage shaft - Guides printer carriage |
| PA03002-C211FJ | Carrier tension pulley shaft |
| 1480-1023 | Idler shaft (dowel pin) |
| RB2-3930-000CN | Pickup roller shaft |
| RB2-3943-000CN | Paper pickup roller drive shaft - Mates to the shaft that pickup roller is attached to |
| RC1-0210-000CN | Feeder roller shaft - Axel for Tray 2 feed roller |
| RC1-1500-000CN | Drive shaft - Roller shaft that supports the paper cassette pickup rollers |
| RB2-3083-000CN | Gear shaft - Axle for 14 tooth gear on drive gear holder |
| RB2-4933-000CN | Lock release shaft - Small shaft with locking tab - Does NOT include the lock release lever |
| RB2-3056-000CN | Belt drive shaft 2 - Front of middle wide belt - Tiny drive belts attach on each end of this shaft |
| RB2-6274-000CN | Belt shaft 3 - Tiny idler shafts at back of narrow paper belts |
| RB2-6269-000CN | Belt drive shaft 2 - Front of middle wide belt - Tiny drive belts attach on each end of this shaft |
| 07440-60020 | Grit wheel shaft assembly |
| RB3-0060-020CN | Idler gear shaft - Short metal rod |
| RB3-0011-000CN | Feed drive shaft - Long shaft with eight feed belt ball type pulleys and one ribbed feed guide drive belt pulley |
| RB2-2825-000CN | Belt shaft 3 |
| RB2-3073-000CN | Belt drive shaft 1 - Between wide middle belt and the two narrower rear belts - Transfers power from gear assembly |
| RB2-6268-000CN | Idler shaf |
| RB2-8016-000CN | Latching shaft - Long square shaft with a latching hook at one end - Used with the free release latch and release handle to secures the ADF main assembly when the unit is in the operating position |
| RB2-1800-000CN | Pickup roller shaft - Tray 2 |
| RB1-8674-000CN | Belt drive shaft |
| RB1-6192-000CN | Paper feed shaft |
| RB2-0545-000CN | Paper pickup shaft - Shaft that pickup rollers attach to |
| RB1-0811-000CN | Power switch shaft - From front panel button to power switch |
| Q3948-67919 | Feed shaft kit - Includes the feed drive shaft, the belt roller, the idler gear shaft, and the 23 tooth idler gear |
| RB2-2893-000CN | Drive shaft - Drives pickup roller |
| RB1-8867-000CN | Pickup roller shaft - Shaft that the four pickup rollers mount to - Tray 2 pickup roller shaft |
| RB2-3048-000CN | Guide roller shaft |
| C1645-60153 | Pick-Off Shaft (Has 2 D-Shaped Rollers) - if Serial Prefix |
| RB2-3054-000CN | Idler shaft |
| RB2-1886-000CN | Paper feed shaft - Drives all three belts |
| 150491-901PX | Splined shaft assembly |
| C2124-20015 | Idler shaft - Short rod on left side of print mechanism - Used to support idler pulley |
| 153431-001PX | Tractor shaft kit - Includes tractor adjust knob, tractor shaft, and assorted hardware |
| C2642-60282 | Upper (Secondary) carriage rod - Supports upper half of carriage |
| RG5-6132-030CN | Front lift lock assembly - Black plastic cam locks with a silver colored metal flat bar between that lift and lock front of ITB - Actuated via the large green handle on front of printer |
| RG5-6122-020CN | Soft link shaft assembly - Silver shaft and plastic cams that lift ITB cleaning blade into position |
| RG0-1007-000CN | Paper pickup shaft assembly - Includes the shaft, the two cams, pickup roller holder, and end cap |
| RG5-6122-000CN | Soft link shaft assembly - Silver shaft and plastic cams that lift ITB cleaning blade into position |
| RG5-6132-000CN | Front lift lock assembly - Black plastic cam locks with a silver colored metal flat bar between that lift and lock front of ITB - Actuated via the large green handle on front of printer |
| RG0-1007-020CN | Paper pickup shaft assembly - Includes the shaft, the two cams, pickup roller holder, and end cap |
| RB3-0060-000CN | Idler gear shaft - Short metal rod |
| RG5-1947-000CN | Idler roller shaft assembly |
| RC1-0210-020CN | Feeder roller shaft - Axel for Tray 2 feed roller |
| C4647-60018 | Print cartridge service station assembly |
| C2684-60273 | Service station assembly - Does not include ink supply station |
| C2847-60083 | Service station kit |
| C2164-67811 | Service station assembly with motor - Mechanical assembly that moves the service station sled |
| C2171-67820 | Service station assembly - Framework that holds the sled assembly |
| C2890-60080 | Service station assembly - Includes service station base (frame) and sled retainer |
| C2169-60056 | Service station assembly with motor and sled - Does not include service station motor cable |
| C3190-60142 | Service station assembly |
| C2145-67812 | Service station tumbler assembly |
| C2162-67805 | Service station assembly with motor - Does not include service station sled or service station motor cable |
| C2858-60152 | Service station kit - Includes service station cap, four primer tubes, absorber, sled, wiper, drop detect sensor, and bail sensor cable |
| C2688-67041 | Complete service station assembly - Includes the service station motor and wiper assembly |
| C3195-60165 | Service station assembly - For conditioning the ink cartridges when the carriage is in its home position |
| C2145-67850 | Service station housing assembly |
| C2113-60103 | Service station sled replacement kit - Includes the internal gear driven cartridge wiping mechanism assembly, removal tool, and multi-lingual instructions |
| C3195-69165 | Service station assembly - For conditioning the ink cartridges when the carriage is in its home position |
| C2621-60202 | Print cartridge service station assembly |
| C2642-60260 | Service station assembly - Does NOT include motor |
| C3801-60002 | Print cartridge service station assembly |
| C2670-60124 | Service station assembly - Includes the tumbler, sponge, motor, blotter assembly, and chimney wall |
| C2693-67039 | Complete service station assembly - Includes the service station motor, wiper assembly, and sponge |
| C5300-60077 | Service station assembly with tool and instructions - Does NOT include motor |
| C6490-60044 | Service station assembly - For conditioning the printheads when the carriage is in its home position |
| C6487-60065 | Service station assembly - For conditioning the ink cartridges when the carriage is in its home position |
| Q1273-60046 | Service station assembly - Includes drop detector |
| C7790-60279 | Service station assembly |
| C8125-67018 | Complete Service Station Assembly - Mounts behind right side access cover - Includes the service station motor and wiper assembly |
| C8963-60006 | Service station assembly - For conditioning the ink cartridges when the carriage is in its home position |
| C7769-60149 | Service station - Includes wipers, pen caps, and the right hand spittoon |
| C5300-60043 | Service station assembly - Does NOT include motor, tools, or instructions |
| C8116-67047 | Service station |
| C6072-60178 | Service station assembly - Includes drop detector assembly |
| C8154-67034 | Service station assembly - For conditioning the printheads when the carriage is in its home position |
| C4562-60045 | Service station assembly - Includes motor |
| C4530-67803 | Print cartridge service station assembly - Includes motor, cap assembly, and wipers |
| C5324-60003 | Print cartridge service station assembly |
| C6436-60050 | Service station assembly - For conditioning the ink cartridges when the carriage is in its home position |
| C4723-60276 | Service station assembly |
| C8109-67015 | Service station assembly - Includes the service station motor and wiper assembly |
| C8109-67029 | Service station assembly |
| C6090-60083 | Service station assembly - Includes motors, spittoon foam, drop detector, and primer assembly |
| C4602-67901 | Service station kit - Includes housing, absorber, pre-filter, cartridge blotter pads, tumbler assembly, tools, and instructions |
| C7796-60085 | Print cartridge service station assembly - Includes the service station motor, wiper assembly and sponge |
| Q1251-60257 | Service station assembly - Includes motors, spittoon foam, drop detector, and primer assembly |
| C8174-67070 | Service station assembly - For conditioning the printheads when the carriage is in its home position |
| C7790-60476 | Ink supply service station (ISS) assembly |
| Q1273-60255 | Service station assembly - Includes drop detector |
| C7796-60203 | Print cartridge service station assembly - Includes the service station motor, wiper assembly and sponge |