1. Use SmartSearch
2. Use Part Number Search
3.MultiSearch AvailableIs your Mount an HP PART * TONER * PRINTER ? If you know your part number, please enter it on the search box above.
| Part | Description |
| C6680-80050 | Scanner module trailing cable - Has 20-pin (M) edge connectors - 42.9cm (16.9in) long |
| C6747-80007 | Ribbon cable - Has 9-pin (M) edge connectors - 41.3cm (16.3in) long |
| C5316-80002 | Ribbon cable - Has 15-pin (M) edge connectors - 17.2cm (6.8in) long |
| C9706-60104 | Flat flexible cable |
| C6734-60008 | Cable harness assembly - Has many connectors: an 18-pin (F), two 3-pin (F), a 4-pin (F), and two 5-pin (F) - Overall length is 72.9cm (28.7in) |
| C6682-80003 | Ribbon cable |
| C4531-80010 | Head drive flex cable - 41.9cm (16.5in) long |
| C6680-80010 | Cable assembly - 16-pin (F) connector to 34.9cm (13.8in) cable with 3-pin (F) connector, 56.6cmn (22.3in) cable with 3-pin (F) connector, 59.4cm (23.4in) cable with 7-pin (F) connector, and 61cm (24in) cable with 5-pin (F) connector |
| C4531-60006 | Power supply cable - Has 12-pin (F) connectors - 8.8cm (3.5in) long |
| C6663-80011 | Telephone cord with bill tone filter (Germany) |
| C6680-80002 | Ribbon cable - Has 26-pin (M) edge connectors - 15.5cm (6.1in) long |
| C6680-60057 | Ribbon cable - Has 10-pin (M) connectors - 71.8cm (28.3in) long |
| C5300-60010 | Ribbon cable - 10-pin (F) edge connectors on each end - 60.2cm (23.7in) long |
| Q1609A | Telephone cable (Australia and Mexico) |
| C8424-80004 | Cable assembly |
| C8424-80003 | Ribbon cable |
| C6735-80001 | Telephone cable (Spain, Portugal, and Greece) |
| C4723-60237 | Carriage assembly trailing cable - Three ribbon cables bundled together - 2.4m (7.7ft) long |
| C6747-80013 | Telephone cable (Czech, Hungary and Slovakia) |
| Q1647-80006 | Control panel cable - Connects the control panel to the main logic board |
| Q1647-80001 | Scanner trailing cable - Connect the scanner assembly to the main logic PC board |
| C8128-67012 | Main Logic Harness - From the Main Logic board to Carriage Motor, Encoder board, Index Sensor, Output Motor, Line Feed Motor, and Service Station Motor |
| C8116-67042 | Trailing cable |
| C8116-67037 | Power supply harness |
| C4557-60022 | Cable assembly - An 11-pin (F) connector to two 3-pin (F) connectors and a 7-pin (F) connector - 36.8cm (14.5in) long |
| C7790-60120 | Motor Harness |
| Q2660-60104 | Flat flexible cable (FFC) |
| C7790-60122 | Duplexer OOP Sensor Harness |
| C4787-60507 | Stapler unit C-link cable - Has two high density 15-pin (M) connectors - 91.4cm (36in) long |
| C7790-60421 | Front panel cable - Connects the front panel to the main logic PC board |
| C7791-60213 | Motor harness |
| C7791-60214 | Encoder harness |
| C7791-60231 | Duplexer OOP sensor harness |
| C8099-67017 | Cable assembly - A 15-pin (F) connector to a 27.6cm (10.9in) cable with a 6-pin (F) connector, a 34.4cm (13.6in) cable with a 3-pin (F) connector, and a 41.0cm (16.1in) cable with a 6-pin (F) connector |
| Q1636-80004 | Scanner cable - Connects the scanner to the main logic PC board |
| C8085-60515 | Flipper and paper path ribbon cable |
| C8085-60517 | Jet-link cable and power cord assembly |
| C7790-60121 | Encoder Harness |
| C4531-60116 | Motor cable assembly |
| C4602-80004 | Head drive flex cable - 43.2cm (17in) long |
| C4602-60018 | Power supply cable with ferrite - Has 12-pin (F) connectors - 8.2cm (3.2in) long |
| PA03002-C125FJ | Front panel cable - Between front panel and junction PCA |
| PA03002-C203FJ | DC cable - From power supply to copier logic board |
| PA03002-C204FJ | Carrier flex cable - From carrier unit to junction PCA |
| PA03002-C228FJ | Sensor cable - Connects ADF sensors to copier control board |
| PA03002-C229FJ | CCD cable - From control PCA to CCD PCA on optical unit |
| C6747-60019 | Ribbon cable with ferrite - Has 15-pin (M) edge connectors - 28cm (11in) long |
| C4557-80075 | Carriage assembly flex cable - 40.3cm (15.9in) long |
| C6747-80004 | Ribbon cable - Has 28-pin (M) edge connectors - 56.5cm (22.3in) long |
| Q1273-60117 | Ink supply station to cartridge cable connector |
| Q2660-60103 | Flat flexible cable (FFC) and RFI shield assembly - Includes the flat flexible cable and its wrap-around RFI shield |
| Q2488-60104 | Flat flexible cable |
| PF2282K165NI | LaserJet ADF to scan control board cable |
| Q1251-60109 | Trailing cable kit - Includes trailing cable, trailing cable clip, cover cap, trailing ferrite, and screws - 42 inches |
| Q1678-80002 | Telephone cable to wall socket (South Africa) |
| Q1253-60019 | Trailing cable kit - Includes trailing cable, trailing cable clip, cover cap, trailing ferrite, and screws - For 60-inch version |
| C4714-60181 | Carriage assembly trailing cable (E-size) - Has 60-pin (F) connectors - 1.9m (6.2ft) long |
| C4555-60061 | Motor cable assembly with ferrite - A 14-pin (F) connector to a 2-pin (F) connector and two 5-pin (F) connectors - Overall length is 39.4cm (15.5in) |
| C4647-60003 | Ribbon cable assembly - Two ribbon cables bundled together - Has 14-pin (M) edge connectors - 34.3cm (13.5in) long |
| C6747-60020 | Ribbon cable with ferrite - Has 20-pin (M) edge connectors - 40.6cm (16in) long |
| C5364-60316 | Cable assembly - Has one 4-pin (M) connector and one 4-pin (F) connector - 25.4cm (10in) long |
| C5365-80607 | Cable assembly - 8-pin (F) molex connector to 8-pin (M) mini-DIN connector - 66cm (26in) long |
| Q3083-80003 | Service Station cable |
| C4530-60091 | Trailing cable assembly - Two ribbon cables attached to a plastic mounting bracket - 55.9cm (22in) long |
| C4704-60021 | Hard drive power cable - Has 4-pin (F) connectors - 47.6cm (18.8in) long |
| C4704-60015 | Carriage board trailing cable with ferrite - Three ribbon cables bundled together - 1.9m (6.3ft) long |
| C5300-60012 | Cable assembly - Has 9-pin (F) connectors - 6.1cm (2.4in) long |
| C5364-80301 | Scanner trailing cable |
| C9000-80019 | Keypad flex cable - Connects the keypad to the main logic PC board |
| C9148-60102 | Scanner power cable - Power cable between scanner unit and printer |
| C4704-60024 | Ribbon cable assembly - Has 28-pin (F) connectors - 23.5cm (9.3in) long |
| C8549-60105 | Copy connect cable - Interconnects the copy processor board in one of the optional EIO slots to the LVDS adapter board in the flatbed scanner assembly - 96.5cm (38in) long |
| C4704-60022 | Ribbon cable for one IDE drive - Has 40-pin (F) connectors - 31.8cm (12.5in) long |
| C4530-60044 | Cable assembly |
| C5364-60314 | Cable assembly - Has 9-pin (F) connectors - 10.7cm (4.2in) long |
| C5364-60313 | Ribbon cable - Has 10-pin (M) edge connectors - 69.9cm (27.5in) long |
| C4530-60057 | Cable assembly - Has 3-pin (F) connectors - 7.0cm (2.8in) long |
| C4530-60146 | Main cable harness assembly with ferrites - Has many connectors: a large 10-pin (F), three 2-pin (F), four 3-pin (F), a 5-pin (F), a 6-pin (F), a 7-pin (F), a 9-pin (F), a 12-pin (F), and two 30-pin (F) - Overall length is 88.3cm (34.8in) |
| C6426-60007 | Cable assembly - Has many connectors: a 30-pin (F), a 2-pin (F), two 3-pin (F), a 4-pin (F), two 5-pin (F), and an 8-pin (F) - Overall length is 67.3cm (26.5in) |
| C5374-80001 | Cable assembly - Has a 7-pin (F) connector, a 5-pin (F) connector, and a 3-pin (F) connector - Overall length is 48.3cm (19in) |
| C6429-80084 | Carriage assembly flex cable - Has 24-pin (M) edge connectors - 38.6cm (15.2in) long |
| C6426-60059 | Cable assembly - Has 4-pin (F) connectors - 4.9cm (1.9in) long |
| C4723-60025 | Ribbon cable assembly with ferrite - Has 28-pin (F) connectors - 1.7m (5.6ft) long |
| C9124-60111 | Cable assembly |
| C5374-80004 | Cable assembly - Has 15-pin (F) connectors - 75.7cm (29.8in) long |
| C5374-80005 | Ribbon cable - Has 15-pin (M) edge connectors - 41.3cm (16.3in) long |
| C6680-60002 | Scanner motor cable |
| C5374-80013 | Telephone cable to wall socket (Czech Republic, Slovak and Hungary) |
| C6487-80018 | Trailing cable (front) |
| C5374-80014 | Ribbon cable - Has 26-pin (M) edge connectors - 33.7cm (13.3in) long |
| C6487-80019 | Trailing cable (rear) |
| C5374-80021 | Ribbon cable - Has 22-pin (M) edge connector - 46.0cm (18.1in) long |
| C5374-80034 | LIU to wall socket cable (Switzerland, Italian, and French) |
| C5374-80035 | Telephone cable (Turkey) |
| C5374-80030 | Cable assembly - 16-pin (F) connector to 23.5cm (9.3in) cable with 3-pin (F) connector, 34.3cm (13.5in) cable with 3-pin (F) connector, 36.2cm (14.3in) cable with 7-pin (F) connector, and 78.4cm (30.9in) cable with 5-pin (F) connector |
| C5870-60140 | Cable assembly - 12-pin (F) connector, 5-pin (F) connector, and 7-pin (F) connector - 43.9cm (17.3in) long |
| Q3083-80002 | Scanner ribbon cable |
| C9124-60116 | Flex cable assembly |
| C4704-60025 | Ribbon cable assembly with ferrite - Has 28-pin (F) connectors - 1.3m (4.1ft) long |
| C5876-60103 | Cable assembly with ferrites - 15-pin (F) connector to a 35.6cm (14in) cable with a 6-pin (F) connector, a 38.1cm (15in) cable with a 3-pin (F) connector, and a 43.2cm (17in) cable with a 6-pin (F) connector |
| C6072-60393 | Carriage trailing cable kit - Includes cable, trailing cable clip, nye oil, cover cap, trailing cable ferrite, ferrite holder |
| C5374-60027 | Scanner assembly ground cable |
| 4H1-6581-000CN | Low voltage power supply cable - Connects between the power supply and the DC controller PC board |
| 4H1-6582-000CN | Jet link interface cable assembly - Includes the coiled cable with the printer interface connector on one end and PC board connector on the other |
| 5064-3422 | Telephone cable (Australia, New Zealand) |
| RG1-1612-000CN | Sensor cable assembly |
| Q3948-60129 | Flat flexible cable (FFC) assembly - Connects between the camera (photo) interface board set and the formatter board |
| Q3498-60143 | Flat flexible cable (FFC) assembly - Connects between the line interface unit (LIU) PC board and the formatter board |
| C4788-60524 | Flipper Ribbon Cable - Control Cable for Flipper Assembly |
| 07440-60011 | Ribbon cable which connects the main logic board to the paper drive motor |
| 4H1-1080-000CN | Jet link interface cable assembly - Includes the coiled cable with the printer interface connector on one end and PC board connector on the other |
| Q5914-60102 | Cable assembly - Connects the formatter board to the wireless network module |
| Q6456-60101 | Flat Flexable Cable (FFC) assembly - Connects between the DC controller board (J109) and the formatter board (J702) |
| 07440-60016 | Ribbon cable which connects the main logic board to the carriage drive motor |
| Q3434-80003 | Control panel cable - Connects the control panel to the main logic PC board |
| Q3948-60144 | Flat flexible cable (FFC) assembly - Connects between the formatter assembly (J1001) and the DC controller board (J101) |
| C4647-60004 | Cable for One-Touch Keypad Assembly |
| Q3500-80001 | Telephone cable (2 Conductor) - RJ11 (M) to RJ11 (M) 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal and Spain) |
| C1301-67901 | SCSI Interface Cable and Terminator - Cable attaches from |
| 07440-60049 | Ribbon cable which connects the main logic board to the key panel assembly |
| 8121-0539 | Universal Serial Bus (USB) Interface Cable - Type 'A' Please order 8120-8485 |
| 153502-001PX | AC power wiring kit |
| Q1253-67801 | Trailing cable kit - Includes trailing cable, trailing cable clip, cover cap, trailing ferrite, and screws - For 60-inch version |
| Q1251-67801 | Trailing cable kit - Includes trailing cable, trailing cable clip, cover cap, trailing ferrite, and screws - 42 inches |
| 02276-80053 | Cable assembly which connects the main logic board to the print mechanism |
| 02276-80055 | Flex circuit cable which connects the head driver board to the carriage assembly |
| 5062-0476 | Ribbon cable with ferrites - 26-pin (F) connector to 26-pin edge connector - 13cm (5in) long |
| 02276-80118 | Cable assembly which connects the main logic board to the carriage motor |
| Q1273-60115 | Carriage flex cable assembly - Black plastic piece that covers and connects printheads to ribbon cables that connect to carriage PCA |
| 164805-901PX | Hammer bank power cable |
| 02276-80054 | Cable assembly which connects the power supply to the main logic board |
| 152440-901PX | Control panel cable |
| 152439-901PX | Centronics I/O cable - Has 20-pin connector at one end and 36-pin Centronics (F) connector with bail locks at the other end |
| 152424-901PX | Exhaust fan power cable |
| 152422-901PX | Card cage fan power cable |
| 152421-901PX | Hammer bank logic cable (10-pin) |
| 152420-901PX | Shuttle cable assemble |
| C6455-80008 | Carriage assembly flex cable |
| Q7286-60218 | Power supply cable |
| C8140-67091 | Main cable harness located on top side of printer mechanism |
| C8140-67032 | Carriage motor cable - Provides power for carriage motor |
| C8140-67092 | Carriage motor cable - Provides power for carriage motor |
| C8140-67031 | Main cable harness located on top side of printer mechanism |
| 174414-001PX | Power cable for the stacker |
| C6074-60418 | Carriage trailing cable kit - Includes cable, trailing cable clip, nye oil, cover cap, trailing cable ferrite, ferrite holder |
| Q5888-80174 | Scanner cable |
| Q1273-60232 | Carriage flex cable assembly - Black plastic piece that covers and connects printheads to ribbon cables that connect to carriage PCA |
| C8157-67041 | Trailing cable assembly - Flat ribbon cable (Signal & Power, Voltages 32v, 3.3v, 5v) - Enables electrical signal transmission between carriage and main PCA |
| Q1273-60245 | Ink supply station to cartridge cable connector |
| RG5-5930-020CN | Print cartridge drive cable - From Toner Driver PCA to toner cartridge motors and motor rotation sensors |
| RG5-6148-020CN | Laser cable - Cable between each of the four laser/scanner assemblies and the DC controller PCA |
| RG5-6827-020CN | Fuser power supply cable - DC Controller board to fuser power supply - Ten purple wire cable and two white connectors |
| RG1-1632-000CN | Upper main cable harness which connects to most major assemblies - 240V, 50Hz |
| RG5-5925-020CN | Fuser connecting cable assembly - Cable with large black main connector for fusing assembly |
| RG5-6827-000CN | Fuser power supply cable - DC Controller board to fuser power supply - Ten purple wire cable and two white connectors |
| RG5-7114-020CN | CABLE, MOTOR |
| RG1-1370-000CN | Cable assembly |
| RG5-7727-030CN | Fuser drawer fusing cable and connector assembly - Includes conncector mount |
| RM1-1191-000CN | Memory cable - From DC Controller board to the toner cartridge wireless memory contact tag |
| RG5-7686-000CN | Environmental sensor cable - Temperature sensor cable |
| RG5-7686-020CN | Environmental sensor cable - Temperature sensor cable |
| RG5-7687-020CN | Upper crossmember cable - From DC Controller board to control panel, color registration detection unit, fuser motor (M5) and fuser sensors |
| RG1-0905-000CN | Cable assembly - From AC power module to DC power supply |
| RG5-6240-020CN | Jetlink connector socket and cable |
| RG5-6821-020CN | Paper size cable - From Tray 2 paper width and paper length sensors to DC controller board |
| RG1-1318-000CN | Upper main AC power cable harness which connects to most major assemblies - 120v, 60Hz |
| RH2-5108-000CN | Laser/scanner fiber optic cable - 42.5cm (16.8in) long |
| RG5-5963-020CN | Right rear cable 2 - Cable with eight connectors at right rear of printer from Toner Cartridge Driver PC Board |
| RG5-5962-020CN | Right rear cable - 20 pin connector cable on right rear of Print Cartridge Driver Board |
| RG5-6820-000CN | Fan cable - Connects fans FM2 and FM3 to DC Controller PC board |
| RG1-2067-000CN | Dual cable assembly with ferrites - 7-pin (F) connector, two 5-pin (F) connectors, and one 4-pin (F) connector - 48.9cm (19.3in) long |
| RG5-6820-030CN | Fan cable - Connects fans FM2 and FM3 to DC Controller PC board |
| CA71002-1891FJ | Cable assembly |
| RH2-5109-000CN | Fiber optic cable |
| RG5-5960-020CN | ITB sensor cable assembly - On left side of ITB assembly drawer |
| CA71002-1843FJ | Ribbon cable |
| RG5-5932-020CN | Fusing sensor cable assembly - Connects to Fuser sensor PC Board |
| RG1-0912-000CN | Cable assembly - Large 4-pin (F) connector to small 4-pin (F) connector - 6.7cm (2.6in) long |
| RG1-0908-000CN | Dual cable assembly with ferrites - One 7-pin (F) connector, two 5-pin (F) connectors, and one 4-pin (F) connector - 43.2cm (17in) long |
| RG1-0907-000CN | Cable assembly - Large 7-pin (F) connector to small 7-pin (F) connector - 41.5cm (16.4in) long |
| RG5-6829-020CN | Paper pickup assembly cable - From DC Controller board to paper pickup assembly |
| RG5-6836-030CN | Optional feeder cable - Tray 3 - 500 sheet tray to DC Controller board |
| RG1-1946-000CN | Cable assembly |
| RG5-6826-040CN | DC Controller to fuser safety circuit, high voltage power supply (HVPS), electrostatic transfer belt (ETB) |
| RG1-1319-000CN | Lower main cable harness |
| RG5-6159-030CN | Rear cable and holder assembly - Cable that runs from DC Controller board to both upper and lower paper length detection switches - Includes cover |
| RM1-2594-000CN | Scanner cable - Cable between scanner motors and DC controller PCA |
| RM1-2611-000CN | Solenoid and motor cable - Connects CST pickup and MP Tray pickup solenoids to Driver PCA - Also connects feed motor M4 to Driver PCA |
| RK2-0967-000CN | Scanner cable - Short flat scanner cable |
| RM1-2595-000CN | Temperature sensor cable - Connects environment sensor to DC controller board |
| RM1-2596-000CN | Control panel cable - From control panel to High Voltage Power Supply (HVPS) |
| RG5-5722-030CN | Main cable harness and holder assembly |
| RM1-2605-000CN | Driver cable - From DC Controller board to Driver board |
| RM1-2589-000CN | Media sensor cable - Cable between Tray 2 media type sensor and Relay PCA |
| RM1-2608-000CN | Electrostatic Transfer Belt (ETB) cable - Connects Driver PC board to ETB |
| RG1-4231-020CN | Fuser cable - Main fuser cable for LaserJet 4300 series |
| RM1-2603-000CN | Sensor cable - Senses when the Electrostatic Transfer Belt (ETB) is locked in place - This is the ETB's electrical connection with the rest of the printer |
| RM1-2609-000CN | Duplex docking cable - This cable goes from the top cover and duplex motors down to the driver PC board |
| RM1-2610-000CN | Drum motor cable - Connects cartridge drive motors M6 and M7 to Driver PCA |
| RK2-0969-000CN | Flat cable - Ribbon cable that connects the DC controller board to the Driver board - Flat drive cable 1 - Connector J1023 to J401 |