| RA1-7629-000CN |
Arm - Paper guide arm (Black) - Small curved side arms at MP input |
| RA1-7661-000CN |
Arm - Sensor arm - For sensing paper in the lower cassette base |
| 5063-1256 |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| 5063-1257 |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| C2951A |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| RH2-5104-000CN |
Cable - Fiber optic cable - From DC controller to fiber optic lens |
| SG4-6271-000CN |
Cable - Cable assembly for HP LaserJet II |
| RA1-7628-000CN |
Cap - Spring cap for HP LaserJet IIIP |
| 5184-5220 |
Cartridge - Black toner (EP) cartridge |
| 92275A |
Cartridge - Black toner (EP) cartridge |
| RB2-1758-000CN |
Cover - Display cover - Control panel display cover |
| RA1-8244-000CN |
Deflector - Paper deflector - Directs paper to top cover or face-up tray |
| 92296T |
Film - Film (Transparency) for LaserJet II, LaserJet III, LaserJet 4 Series, LaserJet 4L Series |
| 92296U |
Film - Film (Transparency) for LaserJet 33x0 MFP Seriess, LaserJet 4100 Series, LaserJet P2xxx Printer, Color LaserJet CM1015 MFP |
| Q2449BF |
Flash Card - Ddimm 4mb flash/16mb sra ddimm 4mb flash/16mb sramv.8.1 |
| 33471-69019 |
Fuser Assembly - Fusing assembly (240V, 50Hz) - Bonds toner to paper by heat |
| RG1-1776-000CN |
Gear - Gear cluster assembly (Large) |
| RG1-1777-000CN |
Gear Assembly - Gear assembly - Right side |
| RF1-3304-000CN |
Lamp - Fusing heat lamp (240v, 50Hz) |
| RG1-1771-000CN |
Laser Scanner - Scanner motor assembly - Includes motor drive board |
| 5021-8943 |
Manual - LaserJet quick reference guide - Covers LaserJet Classic, II series, III series, 4 sereis, 5 series, 6 series and 5Si - Volume 1 of 2 volume set |
| 33475-69011 |
Memory - 2MB memory expansion board |
| Q2449-67914 |
Memory - Firmware DIMM memory - 4MB Flash/16MB SRAM combo DIMM |
| J2382-69003 |
Module - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors |
| RG1-1771-000CN |
Motor - Scanner motor assembly - Includes motor drive board |
| RG1-1912-080CN |
Pad - Separation pad - Rectangular pad - Behind pickup roller |
| 33471-67905 |
PC Board - Rear dual port board assembly - Mounted on sheet metal cover |
| 33471-69001 |
PC Board - Formatter (Main Logic) board |
| 33471-69002 |
PC Board - DC controller board |
| RG1-1596-000CN |
PC Board - Lower cassette board |
| RG1-1769-020CN |
PC Board - Laser driver board - Includes laser assembly |
| 8120-1351 |
Power Cord - Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei) |
| 8120-4211 |
Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in South Africa and India) |
| 8121-0964 |
Power Cord - Power cord (Black) - 16 AWG (1.25 sq.mm.), 1.9m (6.2ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, and Thailand) |
| 0950-2623 |
Power Supply - Switching power supply (Delta DPS-158ABA) - 100-240VAC input, 47-63Hz - Four DC outputs (5.15V, +12V, -12V, 24V) - 158 watts - Includes upgrade sticker |
| 33471-69017 |
Power Supply - Main power supply assembly - 120VAC, 60Hz |
| C3195-60168 |
Power Supply - Power Supply Board for Hewlett Packard Plotters. |
| RG1-1910-020CN |
Power Supply - Power supply assembly - 240VAC, 50Hz - Main power supply |
| RA1-7583-030CN |
Roller - Lower pressure roller - Hard rubber roller - Located in fusing assembly |
| RA1-7654-000CN |
Roller - Feed roller assembly - For (Optional) lower cassette input |
| RA1-7674-000CN |
Roller - D-shaped pickup roller - Located in lower cassette assembly |
| RA1-7824-000CN |
Roller - D-shaped pickup roller - Located in lower cassette assembly |
| RF1-2394-000CN |
Roller - Input feed roller/shaft (Only) - Has drive gear between the two feed rollers |
| RF1-2491-000CN |
Roller - Hard roller/spring - Rolls against top output roller |
| RG1-1778-000CN |
Roller - Feed roller assembly - Roller assembly after paper pickup roller |
| RG1-1791-070CN |
Roller - Delivery roller assembly - Has four 'Foam' rollers - For (Face down) top of printer paper output |
| RG1-1792-000CN |
Roller - Pickup roller assembly - For multipurpose input tray |
| RG1-1834-000CN |
Roller - Delivery roller assembly - Includes three dual knobbed rollers - For (face up) front of printer paper output |
| WG8-0323-000CN |
Sensor - Photo sensor for HP LaserJet IIIP |
| 33471AB |
Service Parts - LaserJet IIP 4ppm Laser Printer |
| RA1-7656-000CN |
Service Parts - Ring Ratch A |
| RA1-7657-000CN |
Service Parts - Spr Clutch A |
| RG1-1783-000CN |
Service Parts - Order Rg1-1910-020cn |
| RH7-5025-000CN |
Solenoid - Pickup solenoid (SL2) - For lower cassette pickup roller |
| RH7-5026-000CN |
Solenoid - Feed solenoid (SL3) - For lower cassette paper feed |
| RS5-2439-000CN |
Spring - Compression spring - Provides tension for the separation pad in the 250-sheet paper cassette tray assembly |
| RH7-6017-000CN |
Switch - Power switch (rocker) |
| RA1-7630-000CN |
Tray - 'Face-Up' paper output tray - Hooks on front of printer |
| RG1-1806-070CN |
Tray - Multi-Purpose input tray - Fold down front cover |
View service parts