Partshere  
Lexmark and HP New Oem and refurb parts
Partshere, Toners, HP printers and parts
 
top bar
 
www.Partshere.com / HP Printers /  HP DeskJet 500 HP Support Page/ HP Service Parts SmartSearch
 
Rate this page:

C2106A - DeskJet 500

 

HP DeskJet 500 (C2106A)


MFG Part Number: C2106A
 
Printer Support
Printer Support Techical Help HP Service Manual paper book for HPDeskJet 500 Buy the full service manual
OEM HP Parts List for HP DeskJet 500 View full list of service parts
See HP parts for this model:

HP printer parts available for C2106A HP DeskJet 500 Printer

C2106-ABSORBER ABSORBER - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters. - C2106-ABSORBER
C2106-AC_ADAPTER AC_ADAPTER - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached. - C2106-AC_ADAPTER
C2106-ACTUATOR ACTUATOR - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm). - C2106-ACTUATOR
02276-40016 ARM - 'Paper out' (OOPS flag) sensor arm - 02276-40016
C2106-ARM_DELIVERY ARM_DELIVERY - Paper sensing arm - for 'paper out' or delivering paper sensing arm - C2106-ARM_DELIVERY
C2106-ARM_DOOR ARM_DOOR - Carriage access door sensor arm - C2106-ARM_DOOR
C2106-ARM_PICKUP ARM_PICK_UP - Paper detection arm - for registration plate on picking up paper - C2106-ARM_PICKUP
C2106-ARM_PLATE ARM_PLATE - Lever arm - used to lift the pressure plate lifter - C2106-ARM_PLATE
C2106-ARM_SENSING ARM_SENSING - Arm assembly senses paper in bottom tray - C2106-ARM_SENSING
C2106-ARM_TENSION ARM_TENSION - Tension arm - maintains tension on carriage belt - C2106-ARM_TENSION
02276-40126 BASE - Base - Bottom cover (Plastic piece ONLY) - 02276-40126
C2106-BATTERY BATTERY - Battery pack for hp printer - C2106-BATTERY
C2106-40012 BELT - Carriage belt for HP DeskJet 500 Series - C2106-40012
C2106-BELT_CARRIAGE BELT_CARRIAGE - Carriage belt - moves the carriage assembly across the carriage rod - C2106-BELT_CARRIAGE
C2106-BELT_DUPLEX BELT_DUPLEX - Duplex timing belt - small belt that goes on the duplexer unit - C2106-BELT_DUPLEX
C2106-BELT_PAPER BELT_PAPER - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly. - C2106-BELT_PAPER
C2106-BEZEL BEZEL - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel - C2106-BEZEL
C2112-40002 BRACKET - Wiper bracket - Supports and positions the black wiper - C2112-40002
C2106-BRACKET_LEFT BRACKET_LEFT - Left bracket - carriage rod adjustment bracket (left) - C2106-BRACKET_LEFT
C2106-BRACKET_RIGHT BRACKET_RIGHT - Right bracket - carriage rod adjustment bracket (right) - C2106-BRACKET_RIGHT
C2106-BRACKET_TENSION BRACKET_TENSION - Belt tension bracket - holds the carriage belt idler pulley - C2106-BRACKET_TENSION
02276-80053 CABLE - Cable assembly which connects the main logic board to the print mechanism - 02276-80053
02276-80054 CABLE - Cable assembly which connects the power supply to the main logic board - 02276-80054
02276-80055 CABLE - Flex circuit cable which connects the head driver board to the carriage assembly - 02276-80055
02276-80118 CABLE - Cable assembly which connects the main logic board to the carriage motor - 02276-80118
17255D CABLE - RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long - 17255D
24540-80010 CABLE - Centronics (parallel) cable - 36-pin (M) to 25-pin (M) - 2.0m (6.6ft) long - 24540-80010
24542G CABLE - RS-232C serial cable - 25-pin (M) to 9-pin (F) - 3.0m (9.8ft) long - 24542G
5063-1256 CABLE - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long - 5063-1256
5063-1257 CABLE - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long - 5063-1257
A6144-63008 CABLE - RS-232C serial cable - 25-pin (M) to 9-pin (F) - 3.0m (9.8ft) long - A6144-63008
C2913A CABLE - RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long - C2913A
C2950A CABLE - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long - C2950A
C2951A CABLE - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long - C2951A
C2990A CABLE - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long - C2990A
C2991A CABLE - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long - C2991A
C2106-CABLE_CARRIAGE CABLE_CARRIAGE - Cable assembly which connects the main logic board to the carriage motor - C2106-CABLE_CARRIAGE
C2106-CABLE_INTERFACE CABLE_INTERFACE - Parallel cable - connects from your printer to computer via your parallel port. - C2106-CABLE_INTERFACE
C2106-CABLE_MCHNSM CABLE_MECHANISM - Cable assembly which connects the main logic board to the print mechanism - C2106-CABLE_MCHNSM
C2106-CABLE_PANEL CABLE_PANEL - Control panel assembly - includes ribbon cable, this is the calbe that connects to the control panel or display. - C2106-CABLE_PANEL
C2106-CABLE_USB CABLE_USB - This interface calbe is the standard 2.0 usb cable that connects to your printer and computer for printing. - C2106-CABLE_USB
C2106-CAM CAM - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position - C2106-CAM
C2106-CAP_LIFTER CAP_LIFTER - These lifter caps hold the pressure plate lifter and the kicker spring in place. - C2106-CAP_LIFTER
02276-60095 CARRIAGE - Carriage assembly - Includes flex circuit cable - 02276-60095
C2106-CARRIAGE_ASSY CARRIAGE_ASSEMBLY - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider. - C2106-CARRIAGE_ASSY
C2106-CARRIAGE_BASE CARRIAGE_BASE - Carriage base or pre-loader assembly - mounted to bottom of carriage base - C2106-CARRIAGE_BASE
C2106-CARRIAGE_BELT CARRIAGE_BELT - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting. - C2106-CARRIAGE_BELT
C2106-CARRIAGE_CABLE CARRIAGE_CABLE - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side). - C2106-CARRIAGE_CABLE
C2106-CARRIAGE_LATCH CARRIAGE_LATCH - A-arm latch - retains latch over the printheads on the carriage - C2106-CARRIAGE_LATCH
C2106-CARRIAGE_LATCH_CVR CARRIAGE_LATCH_COVER - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle. - C2106-CARRIAGE_LATCH_CVR
C2106-CARRIAGE_MOTOR CARRIAGE_MOTOR - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement. - C2106-CARRIAGE_MOTOR
C2106-CARRIAGE_ONLY CARRIAGE_ONLY - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly). - C2106-CARRIAGE_ONLY
C2106-CARRIAGE_PC_BRD CARRIAGE_PC_BOARD - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it. - C2106-CARRIAGE_PC_BRD
51626A CARTRIDGE - HP 26A print cartridge (Black) - High capacity, 40ml volume - Prints approximately 790 pages (actual yield depends on specific use)(North America) - 51626A
51626AA CARTRIDGE - HP 26A Lge Black InkJet Crtg AP - 51626AA
51626AC CARTRIDGE - HP 26A Lge Black InkJet Crtg Can - 51626AC
51626AL CARTRIDGE - HP 26A Lge Black InkJet Crtg LAR - 51626AL
51626G CARTRIDGE - Black Print Cartridge (Regular) - Prints Approximately - 51626G
51626GA CARTRIDGE - Black print cartridge (Regular) - Prints approximately 397 pages based on 5% density on a 8in by 10in print area (Asia/Pacific) - 51626GA
51626GC CARTRIDGE - Black print cartridge (Regular) - Prints approximately 397 pages based on 5% density on a 8in by 10in print area (Canada) - 51626GC
51626GE CARTRIDGE - Black print cartridge (Regular) - Prints approximately 397 pages based on 5% density on a 8in by 10in print area (Europe) - 51626GE
51626GL CARTRIDGE - Black print cartridge (Regular) - Prints approximately 397 pages based on 5% density on a 8in by 10in print area (Latin America) - 51626GL
51626TE CARTRIDGE - Black print cartridge (High capacity) - (2 pack of 51626AE) - Each one prints approximately 800 pages based on 5% density on a 8in by 10in print area (Europe) - 51626TE
C6611AN CARTRIDGE - Black print cartridges (high capacity) - (two-pack of 51626A) each prints approximately 800 pages based on 5% density on an 8-inch (20.3cm) by 10-inch (25.4cm) print area (USA) - C6611AN
C2106-40003 CHASSIS - Print mechanism chassis assembly - The base structure of the print mechanism - C2106-40003
C2106-CHASSIS CHASSIS - Chassis assembly - the large plastic item that forms the base of the print mechanism - C2106-CHASSIS
02276-00015 CLIP - Carriage rod ground clip - 02276-00015
C2106-CLUTCH_FEED CLUTCH_FEED - Clutch unit resposible for unit picking up paper from the pick up unit. - C2106-CLUTCH_FEED
02276-60080 CONTROL_PANEL - Control panel assembly - Includes ribbon cable - 02276-60080
C2106-CONTROL_PANEL CONTROL_PANEL - Control panel assembly - control buttons and display on top front of the unit. - C2106-CONTROL_PANEL
02276-40047 COVER - Slot cover - Used to cover empty font cartridge (butch plate) - 02276-40047
02277-60063 COVER - Top cover - Has cutouts for keypad and font cartridges - 02277-60063
C2106-40004 COVER - Output tray cover - Smoked plastic - C2106-40004
C2106-60011 COVER - Paper access cover assembly - Lift-up top/front cover - C2106-60011
C2106-COVER_BACK COVER_BACK - Back cover of printer, it is usually removed to clear paper jams. - C2106-COVER_BACK
C2106-COVER_CARTRIDGE COVER_CARTRIDGE - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves. - C2106-COVER_CARTRIDGE
C2106-COVER_MAIN COVER_MAIN - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off. - C2106-COVER_MAIN
C2106-DEFLECTOR DEFLECTOR - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly - C2106-DEFLECTOR
C2106A DESKJET - DeskJet 500 Printer - C2106A
C2106-DISPLAY DISPLAY - Status led display (LCD display assembly). - C2106-DISPLAY
C2106-DOOR_CARRIAGE DOOR_CARRIAGE - Main front access door - covers the top of the printer and provide access to the carriage when open. - C2106-DOOR_CARRIAGE
C2106-DOOR_CARTRIDGE DOOR_CARTRIDGE - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door. - C2106-DOOR_CARTRIDGE
C2106-DOOR_REAR DOOR_REAR - Rear cleanout door assembly - rear paper jam clean out door assembly. - C2106-DOOR_REAR
C2106-DRIVE_ASSY DRIVE_ASSEMBLY - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring. - C2106-DRIVE_ASSY
C2106-DUPLEXER DUPLEXER - Auto duplexer assembly - provides double sided printing capability - C2106-DUPLEXER
C2106-ENCODER ENCODER - Encoder spring - provides tension for encoder strip - C2106-ENCODER
C2106-ENCODER_DISK ENCODER_DISK - Disk encoder - helps to provide position information of the paper - C2106-ENCODER_DISK
C2106-ENCODER_STRIP ENCODER_STRIP - Encoder strip - carriage position sensor reference - C2106-ENCODER_STRIP
C2106-EXTENDER_INPUT EXTENDER_INPUT - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths - C2106-EXTENDER_INPUT
C2106-EXTENDER_OUTPUT EXTENDER_OUTPUT - Paper exit tray extension - C2106-EXTENDER_OUTPUT
C2106-FAN_PC_BRD FAN_PC_BOARD - Fan to cool power supply unit - C2106-FAN_PC_BRD
C2106-FAN_VACCUM FAN_VACCUM - Vacuum fan assembly - C2106-FAN_VACCUM
C2106-FEED_ROLLERS FEED_ROLLERS - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk - C2106-FEED_ROLLERS
C3828A FILM - Film (Transparency) for OfficeJet R65 Series, PhotoSmart P1000, PhotoSmart P1100, OfficeJet G55 Series Transparency Film 200 SHEETS. - C3828A
C3832A FILM - Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package - C3832A
C3834A FILM - Film (Transparency) for DeskJet 1600 Series, DeskJet 2000 Series, DeskJet 800 Series, DeskJet 600 Series - C3834A
C3835A FILM - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series - C3835A
C3836A FILM - Premium High-Gloss Film - A size (8.5 x 11-inches) - 50 sheets - C3836A
C3837A FILM - Film (Glossy) for DeskJet 1600 Series, OfficeJet 700 Series, DeskJet 895, DeskJet 895 Series - C3837A
C6051A FILM - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series - C6051A
C6053A FILM - Film (Transparency) for Color InkJet cp1700 Series, DeskJet 1180 Series, DeskJet 9300 Series, DeskJet 1280 Series - C6053A
C2106-FLAG_PAPER FLAG_PAPER - OOPS flag - out of paper sensor - C2106-FLAG_PAPER
C2128-40063 FOOT - Rubber foot - Replacement rubber foot for the bottom of the printer (two used) - C2128-40063
C2106-FORMATTER FORMATTER - Formatter board assembly - C2106-FORMATTER
C2106-FRONT_PANEL FRONT_PANEL - Front panel assembly - includes lcd and actuator buttons - C2106-FRONT_PANEL
02227-60030 FUSER_ASSEMBLY - Fuse assembly - Used in power module (AC adapter) - 02227-60030
02276-40017 GEAR - Idler gear - 18 tooth - Between transmission and cam gear - 02276-40017
02276-40020 GEAR - Idler gear - 33 tooth - Between transmission and cam gear - 02276-40020
02276-40022 GEAR - Pivot gear - Transmits motion from pivot to transmission gears - 02276-40022
02276-40024 GEAR - Cam gear - Controls movement of pressure plate for picking and kicking operations - 02276-40024
02276-40055 GEAR - Cluster gear - Provides gear reduction between paper motor and drive rollers - 02276-40055
02276-40064 GEAR - Transmission gear - Transmits motion of pick trigger to initiate paper pick or kick cycle - 02276-40064
02276-40116 GEAR - Pinion gear - 17 tooth - Controls movement of follower - 02276-40116
C2162-40002 GEAR - Cluster gear for HP DeskJet 500 Series - C2162-40002
C2106-GEAR_ASSY GEAR_ASSEMBLY - ADF gear assembly driven by ADF main motor - C2106-GEAR_ASSY
C2106-GEAR_CLUSTER GEAR_CLUSTER - Cluster gear, large gear on service station - C2106-GEAR_CLUSTER
C2106-GEAR_DOUBLE GEAR_DOUBLE - Transfer gear - has double gear attached on service station - C2106-GEAR_DOUBLE
C2106-GEAR_MAIN GEAR_MAIN - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller. - C2106-GEAR_MAIN
C2106-GEAR_STATION GEAR_STATION - Gears on shaft of spittoon station - C2106-GEAR_STATION
02276-40079 GROMMET - Grommet (vibration isolator/shock absorber) - 02276-40079
C2106-67903 GROUND - Ground plane - Fits into base under main logic board - C2106-67903
02276-00021 GUIDE - Carriage guide - Cross piece that holds pinch rollers - 02276-00021
02276-40105 GUIDE - Left wall - Supports media on left side - 02276-40105
02276-40106 GUIDE - Paper pusher - Pushes against media to maintain correct edge alignment - 02276-40106
C2106-GUIDE_PAPER GUIDE_PAPER - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken - C2106-GUIDE_PAPER
0515-0842 HARDWARE - Pan head machine screw - M3.0 x 0.5, 8mm long, Pozidrive tip - Carbon steel, conical washer - Zinc-clear chromate conversion plated - 0515-0842
C2106-HOLDER HOLDER - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place. - C2106-HOLDER
1818-5443 IC_ROM - DJ500 firmware IC - 1818-5443
C2106-IDLER IDLER - Scanner belt idler assembly - maintains scannter belt tension. - C2106-IDLER
C2106-INK_DLVRY INK_DELIVERY_SYSTEM - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly - C2106-INK_DLVRY
C2106-INK_SUPPLY_STATION INK_SUPPLY_STATION - Ink supply service station (iss) assembly - C2106-INK_SUPPLY_STATION
C6049A IRON-ONTRANSFERS - Iron-On Transfers for DeskJet 2500C Series, HP DeskJet D1400 Printer Series, DeskJet D24XX Series, DeskJet F4180 Series - C6049A
02276-80061 LABEL - Label for DeskJet 500 Series, DeskJet 500, DeskJet 505, DeskJet 525 - 02276-80061
C2106-60002 MANUAL - C2106A DeskJet 500 printer owner's manual kit - C2106-60002
C2162-60045 MANUAL - Driver software kit with 14 True Type fonts and ColorSmart driver, Version 5.0 - Kit includes two 3.5-inch disks and information guide - For Windows 3.1 (English) - C2162-60045
C2168-60038 MANUAL - Driver software with 14 True Type fonts, Version 4.0 - Includes 5.25-inch floppy disk and manual - For Windows 3.1 (English) - C2168-60038
C2170-90099 MANUAL - DeskJet family technical reference manual - Lists PCL 3 printer commands for DeskJets and OfficeJets - C2170-90099
C6450-60020 MANUAL - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1 - C6450-60020
C6450-60021 MANUAL - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1 - C6450-60021
C2106-60004 MANUALKIT - Manual Kit for DeskJet 500 Series - C2106-60004
C2106-60005 MANUALKIT - Manual Kit for DeskJet 500 Series - C2106-60005
C2106-60006 MANUALKIT - Manual Kit for DeskJet 500 Series - C2106-60006
C2106-60007 MANUALKIT - Manual Kit for DeskJet 500 Series - C2106-60007
C2106-60008 MANUALKIT - Manual Kit for DeskJet 500 Series - C2106-60008
C2113-60035 MOTOR - Carriage drive motor assembly - Includes ribbon cable - C2113-60035
C2113-60069 MOTOR - Paper advance motor - C2113-60069
C2106-MOTOR_CARRIAGE MOTOR_CARRIAGE - Carriage motor - motor that drives the carriage assembly - C2106-MOTOR_CARRIAGE
C2106-MTR_SRVCE_STATION MOTOR_SERVICE_STATION - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly - C2106-MTR_SRVCE_STATION
C2106-80002 NAMEPLATE - Nameplate - C2106A DeskJet 500 printer logo - C2106-80002
02277-80069 OVERLAY - Keypad overlay - For top of control panel assembly - 02277-80069
C2106-OVERLAY OVERLAY - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately. - C2106-OVERLAY
C2106-PAD_TRAY PAD_TRAY - Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing - C2106-PAD_TRAY
C1812A PAPER - Greeting card paper pack (White) - A size (8.5 x 11-inches) - Includes 20 sheets and 20 envelopes - C1812A
C1824A PAPER - Media for HP C5894A - C1824A
C1825A PAPER - Media for HP C8136A - C1825A
C3831A PAPER - Paper (Glossy) for DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series, DeskJet 660 Series - C3831A
C3833A PAPER - Premium Glossy InkJet Paper - A size (8.5 x 11-inches) - 10 sheets - C3833A
C5973A PAPER - Premium glossy paper - A size (8.5 x 11-inches) - 25 sheets per package - C5973A
C6039A PAPER - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper - C6039A
C6042A PAPER - Paper (Matte) for DeskJet D14XX Series, DeskJet D42XX Series, PhotoSmart 7350 Printer, PhotoSmart 7150 Printer - C6042A
C6044A PAPER - HP Photo Greeting Cards (Glossy) - A size (8.5 x 11-inches) - 10 scored half-fold glossy cards and envelopes - C6044A
C6817A PAPER - Brochure and flyer paper - Glossy on both sides - A size (8.5 x 11-inches), 98 brightness - 50 sheets - C6817A
C6828A PAPER - Media for HP C8952A - C6828A
C6955A PAPER - Media for HP C6428A - C6955A
C6979A PAPER - Premium Photo Paper (Glossy) - A size (8.5 x 11-inches) - 50 sheets - C6979A
C6983A PAPER - Photo quality InkJet paper - With two sided semi-gloss finish - A size (8.5 x 11-inches) - 25 sheets per package - C6983A
C7007A PAPER - Photo Quality InkJet Paper (Matte) - With two sided matte finish - A size (8.5 x 11-inches) - 100 sheets - C7007A
C7018A PAPER - Photo Greeting Cards (White, Matte) - A size (8.5 x 11-inches), half fold, pre-scored - Includes 20 cards and 20 envelopes - C7018A
C7019A PAPER - HP Textured Half-fold Greeting Cards (White) - A size (8.5 x 11-inches) - C7019A
Q7852A PAPER - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper - Q7852A
02277-60003 PC_BOARD - Head driver board - 02277-60003
02277-60087 PC_BOARD - Power supply board - 02277-60087
C2106-60001 PC_BOARD - Main Logic Board (Includes Firmware) - C2106-60001
C2106-69001 PC_BOARD - Main logic board (Includes firmware) - C2106-69001
C2106-PC_BRD PC_BOARD - Ink cartridge carriage assembly pc board - includes carriage pc board only - C2106-PC_BRD
C2106-PC_BRD_DC PC_BOARD - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board. - C2106-PC_BRD_DC
C2106-PC_BRD_INTERFACE PC_BOARD - Internal print server lan interface board - plugs into peripheral eio. usefull for networking and multiple users. - C2106-PC_BRD_INTERFACE
C2106-67902 PINCH_ASSEMBLY - Pinchwheel Kit - Includes 3 wheels and 3 retaining springs - C2106-67902
C2106-PINCHWHEEL PINCHWHEEL - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs - - C2106-PINCHWHEEL
02276-40067 PIVOT - Black plastic part under platten - Supports pick roller - 02276-40067
C2106-60040 PLATE - Pressure plate - Lifts the stack of paper to be printed - C2106-60040
02276-00006 PLATEN - Printer platen - Silver colored metal plate that supports paper during printing process - 02276-00006
C2106-POWER_CORD POWER_CORD - Power module power cord- wall outlet cable to power module only. does not include power module. - C2106-POWER_CORD
17222B POWER_MODULE - Power module (transformer, Lucent 3301B2) - 220VAC input, 50Hz, 0.25A - 10-0-10VAC output, 50Hz, 2A, 40VA - Has attached AC power cord (for 220V in Europe) - 17222B
9100-4503 POWER_MODULE - Power module (transformer) - 120VAC input, 60Hz - 20VAC output, 2A output - Has attached NEMA 5-15P power cord (USA, Canada) - 9100-4503
9100-4505 POWER_MODULE - Power module (transformer, Lucent 3301B2) - 220VAC input, 50Hz, 0.25A - 10-0-10VAC output, 50Hz, 2A, 40VA - Has attached AC power cord (for 220V in Europe) - 9100-4505
9100-4507 POWER_MODULE - Power module (transformer) - 100VAC input, 50-60Hz - 20VAC output, 2A - Has attached AC power cord (Japan) - 9100-4507
9100-4528 POWER_MODULE - Power module (transformer) - 220VAC input, 50Hz - 20VAC output, 2A - Denmark - 9100-4528
C2106-POWER_MDLE POWER_MODULE - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord - C2106-POWER_MDLE
C2106-POWER_MDLE_ASSY POWER_MODULE_ASSY - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord - C2106-POWER_MDLE_ASSY
C2106-POWER_SUPPLY POWER_SUPPLY - Power supply board (internal pwr supply unit in the office machine). - C2106-POWER_SUPPLY
C2106-POWER_SUPPLY_BRD POWER_SUPPLY_BOARD - High voltage power supply board - C2106-POWER_SUPPLY_BRD
02276-60106 PRIMER - Ink cartridge priming station replacement kit (Also known as the D-PRIME kit) - 02276-60106
02277-69114 PRINT_MECHANISM - Print mechanism assembly - Complete mechanism with carriage movement, paper picking and service station - Does NOT include head driver board - 02277-69114
C2106-PRINT_MCHNSM PRINT_MECHANISM - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables. - C2106-PRINT_MCHNSM
C2106-PULLEY PULLEY - Paper pick up tray motor pulley. - C2106-PULLEY
C2114-40052 PULLEY - Idler pulley with bearing - Mounts on idler shaft - C2114-40052
02276-40122 RETAINER - Cable retainer - Routes flex cable between the carriage and the head driver PCA - 02276-40122
5183-5267 RETURN_KIT - Return kit with box and instructions - For returning defective Thermal InkJet (TIJ) 2.0 cartridges - 5183-5267
C2113-20006 ROD - Carriage rod - Shaft that the carriage assembly rides on - C2113-20006
C2114-40051 ROD - Interposer end effector rod - Interfaces between triggers and follower to initiate picking and kicking of paper - C2114-40051
C2106-ROD_CARRIAGE ROD_CARRIAGE - Carriage rod - shaft that the carriage assembly rides on - C2106-ROD_CARRIAGE
02276-60056 ROLLER - Main drive roller - Drives media through printer - 02276-60056
02276-60094 ROLLER - Pinch roller - Ensures contact between paper and main roller - 02276-60094
C2106-ROLLER_EXIT ROLLER_EXIT - Paper exit rollers - out put assembly. - C2106-ROLLER_EXIT
C2106-ROLLER_PICKUP ROLLER_PICKUP - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray - C2106-ROLLER_PICKUP
C2106-40009 SENSOR - Follower for HP DeskJet 500K - C2106-40009
C2106-SENSOR_EXIT SENSOR_EXIT - Exit media sensor sv - C2106-SENSOR_EXIT
C2106-SENSOR_OPEN SENSOR_OPEN - Door sensor assembly - open door sensor - C2106-SENSOR_OPEN
C2106-SENSOR_OUT SENSOR_OUT - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray - C2106-SENSOR_OUT
C2106-SENSOR_SPOT SENSOR_SPOT - Spot sensor assembly is attached to the carriage assembly. - C2106-SENSOR_SPOT
C2106-SEPARATOR SEPARATOR - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays. - C2106-SEPARATOR
C2106A-Manual SERVICE_GUIDE - HP DeskJet 500 Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair. - C2106A-Manual
C2106-SERVICE_STATION SERVICE_STATION - Service station assembly - for conditioning the printheads when the carriage is in its home position - C2106-SERVICE_STATION
C2114-20001 SHAFT - Idler shaft (New style) - C2114-20001
02276-80095 SHIELD - Font cartridge shield - Inner metal 'box' for cartridge slot - 02276-80095
02276-60098 SLED - Sled assembly (White) - Provides print cartridge servicing, including wiping and capping of the nozzle for serial number 3212A00000 and above, and serial number 3217S00000 and above - 02276-60098
C2106-60066 SLED - Sled assembly - Caps print cartridge when idle - Gray type for S/N 0000A00000 to 3211A99999, and S/N 0000S00000 to 3216S99999 - C2106-60066
C2106-SLED_ASSY SLED_ASSEMBLY - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly - C2106-SLED_ASSY
C2106-SLIDER SLIDER - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side. - C2106-SLIDER
C2162-60052 SOFTWARE - Software for DeskJet 500 Series, DeskJet 550C Series, DeskJet 540 Series, DeskJet 560 - C2162-60052
C2162-60058 SOFTWARE - Software for DeskJet 500 Series, DeskJet 550C Series, DeskJet 540 Series, DeskJet 560 - C2162-60058
C2162-60253 SOFTWARE - Software for DeskJet 500 Series, DeskJet 550C Series, DeskJet 540 Series, DeskJet 560 - C2162-60253
C2162-60256 SOFTWARE - Software for DeskJet 500 Series, DeskJet 550C Series, DeskJet 540 Series, DeskJet 560 - C2162-60256
C2168-60039 SOFTWARE - Software for DeskJet 500 Series, DeskJet 550C Series, DeskJet 540 Series, DeskJet 560 - C2168-60039
C2170-60088 SOFTWARE - Software for DeskJet 500 Series, DeskJet 550C Series, DeskJet 540 Series, DeskJet 560 - C2170-60088
C2170-60091 SOFTWARE - Software for DeskJet 500 Series, DeskJet 550C Series, DeskJet 540 Series, DeskJet 560 - C2170-60091
C2170-60092 SOFTWARE - Software for DeskJet 500 Series, DeskJet 550C Series, DeskJet 540 Series, DeskJet 560 - C2170-60092
C2170-60093 SOFTWARE - Software for DeskJet 500 Series, DeskJet 550C Series, DeskJet 540 Series, DeskJet 560 - C2170-60093
C2170-60095 SOFTWARE - Software for DeskJet 500 Series, DeskJet 550C Series, DeskJet 540 Series, DeskJet 560 - C2170-60095
C2170-60096 SOFTWARE - Software for DeskJet 500 Series, DeskJet 550C Series, DeskJet 540 Series, DeskJet 560 - C2170-60096
C2170-60097 SOFTWARE - Software for DeskJet 500 Series, DeskJet 550C Series, DeskJet 540 Series, DeskJet 560 - C2170-60097
C2170-60100 SOFTWARE - Software for DeskJet 500 Series, DeskJet 550C Series, DeskJet 540 Series, DeskJet 560 - C2170-60100
C2106-SPEAKER SPEAKER - Speaker assembly - includes speaker cable. - C2106-SPEAKER
C2106-SPITTON SPITTON - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process - C2106-SPITTON
02276-00010 SPRING - Transmission alignment spring - Three metal fingers that hold tensions on transmission gears - 02276-00010
02276-20016 SPRING - Platen spring - Maintains height of platen in relation to thickness of input paper stack - 02276-20016
02276-20026 SPRING - Paper pusher spring - Provides pressure on paper pusher - Maintains correct media alignment for paper input tray - 02276-20026
02276-20028 SPRING - Unloader spring - Applies tension to the unloader - 02276-20028
02276-20030 SPRING - End effector spring - Flexible link between carriage and interposer end effector - 02276-20030
02277-00005 SPRING - Preloader - Applies pressure to drive shaft and ensures that drive gear keeps full contact with cluster gear - 02277-00005
1460-1940 SPRING - Compression spring - 302 stainless steel, passivity finish, 0.875in long, 0.36in OD, 0.026in wire diameter, 4.17 in/lb rate - On pulley wedge, for carriage belt tension - 1460-1940
C2106-00008 SPRING - Pinchwheel spring - Holds pinch rollers in place - C2106-00008
C2106-20003 SPRING - Paper spring - Maintains upward pressure on pressure plate - C2106-20003
C2106-SPRING_CMPRSN SPRING_COMPRESSION - Compression spring - on pulley wedge, for carriage belt tension - C2106-SPRING_CMPRSN
C6822A STICKERS - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet - C6822A
C6823A STICKERS - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet - C6823A
C4562-60018 STORAGE_SYSTEM - Garage assembly - Holds print cartridge when not in use - Also referred to as a 'cartridge humidor' - C4562-60018
02277-00006 STRIP - Ground strip - Provides logic PCA ESD protection - 02277-00006
02276-40124 SUPPORT - Right wall - Right side mounting surface for carriage motor and carriage rod - Maintains alignment of transmission gears - 02276-40124
02227-60021 SWITCH - Power switch assembly - 02227-60021
2279A+49B-00 TRAININGKIT - Training Kit for DeskJet 500 Series - 2279A+49B-00
02279+49A-90111 TRAININGTEST - Training Test for DeskJet 500 Series - 02279+49A-90111
9100-4509 TRANSFORMER - Power module (transformer) - 240VAC input, 50Hz - 20VAC output, 2A - Has attached AC power cord (United Kingdom) - 9100-4509
9100-4519 TRANSFORMER - Power module (transformer) - 220VAC input, 50Hz - 20VAC output, 2A - China - 9100-4519
9100-4522 TRANSFORMER - Power module (transformer) - 240VAC input, 50Hz - 20VAC output, 2A - (Australia, New Zealand) - 9100-4522
9100-4524 TRANSFORMER - Power module (transformer) - 220VAC input, 50Hz - 20VAC output, 2A - Switzerland - 9100-4524
9100-4526 TRANSFORMER - Power module (transformer) - 220VAC input, 50Hz - 20VAC output, 2A - South Africa - 9100-4526
02276-40114 TRAY - Input extension tray (paper catch) - Slides out for legal size paper - 02276-40114
02276-60068 TRAY - Paper output tray - 02276-60068
C2106-TRAY_ASSY TRAY_ASSEMBLY - Paper input tray assembly for loading paper (bottom). - C2106-TRAY_ASSY
C2106-TRAY_ASSY_CVR TRAY_ASSEMBLY_COVER - Tray cover - the top cover for the paper pick up tray unit. - C2106-TRAY_ASSY_CVR
C2106-TRAY_BASE TRAY_BASE - Tray base- bottom base of the paper input tray. - C2106-TRAY_BASE
02276-40125 TRIGGER - Trigger - Initiates paper pick or kick cycle - 02276-40125
02276-40120 UNLOADER - Unloader - Prevents triggers from activating mechanism continuously - 02276-40120
07440-40055 WEDGE - Pulley wedge - For carriage belt tension - 07440-40055
C2106-WINDOW WINDOW - Top/front access door assembly - print cartridge access door window. - C2106-WINDOW
C2106-40020 WIPER - Cartridge wiper - Wipes ink and debris from print nozzle - C2106-40020

bottom bar

Helpfull Links:   | HP Parts 1 2 3 4 5 | SmartSearch |
Home
       About Us       Contact Us        Support       Site Map   

Copyright© 2014 Partshere.com   Privacy Policy  Terms and Conditions     Send us your Feedback