Partshere  
Lexmark and HP New Oem and refurb parts
Partshere, Toners, HP printers and parts
 
top bar
 
www.Partshere.com / HP Printers /  HP LaserJet 4000se HP Support Page/ HP Service Parts SmartSearch
 
Rate this page:

C3094A - LaserJet 4000se

 

HP LaserJet 4000se (C3094A)


MFG Part Number: C3094A
 
Printer Support
Free technical reference manuals for HPLaserJet 4000se Techical Help HP Service Manual paper book for HPLaserJet 4000se Buy the full service manual
OEM HP Parts List for HP LaserJet 4000se View full list of service parts
See HP parts for this model:

HP printer parts available for C3094A HP LaserJet 4000se Printer

RB1-8851-000CN ACTUATOR - Power switch actuator rod - RB1-8851-000CN
C2809A ADAPTER - Serial cable adapter - 9-pin (M) to 25-pin (F) - C2809A
RB1-8700-000CN ARM - Laser shutter arm - RB1-8700-000CN
RB1-8879-000CN ARM - Paper tray sensing arm - RB1-8879-000CN
RB2-2387-000CN ARM - Tray 1 retaining arm - RB2-2387-000CN
RF5-3116-000CN ARM - Tray 1 paper sensor actuator arm and cover - RF5-3116-000CN
RG5-2650-000CN ARM - Delivery sensor arm assembly - RG5-2650-000CN
C7833-40014 BASE - Reversible base assembly - Used in the lower position when one 500-sheet tray is installed on the LaserJet, or the upper position when two 250-sheet trays are installed - The print-to-mail accessory sits on this base - C7833-40014
RS5-1179-000CN BEARING - Transport roller bearing - RS5-1179-000CN
RB1-8668-030CN BELT - Feed guide drive belt - Small belt approximately 5/16 inch wide with 'A' shaped ribs on it - RB1-8668-030CN
RB1-8946-000CN BUSHING - Separation roller bushing - RB1-8946-000CN
RB1-8688-000CN BUTTON - Engine test button - Manual test button - RB1-8688-000CN
RB1-8849-000CN BUTTON - Power Switch Button - RB1-8849-000CN
RB1-8849-030CN BUTTON - Power switch button - RB1-8849-030CN
5063-1256 CABLE - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long - 5063-1256
5063-1257 CABLE - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long - 5063-1257
92215N CABLE - Interface cable kit - For HP peripherals designed for use in an AppleTalk/Phonenet network - Not for Macintosh models that have recessed I/O connectors - 92215N
92215S CABLE - RS-422 serial cable - 8-pin (M) to 8-pin (M) - 2.0m (6.6ft) long - 92215S
C2932A CABLE - RS-232C serial cable - 9-pin (M) to 9-pin (F) - 3.0m (9.8ft) long - C2932A
C2933A CABLE - RS-232C serial cable - 9-pin (M) to 25-pin (F) - 3.0m (9.8ft) long - C2933A
C2950A CABLE - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long - C2950A
C2951A CABLE - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long - C2951A
C2990A CABLE - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long - C2990A
C2991A CABLE - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long - C2991A
RG5-3700-000CN CABLE - Cable assembly - 3-pin (F) connectors on each end - 10.0cm (3.9in) long - RG5-3700-000CN
RG5-3703-000CN CABLE - Cable assembly - Large 6-pin (F) connector to both a 6.5cm (2.6in) grounding cable with a ring terminal and a 39.4cm (15.5in) cable with a small 6-pin (F) connector - RG5-3703-000CN
RG5-3704-000CN CABLE - Envelope feeder connector and cable - RG5-3704-000CN
RG5-3705-000CN CABLE - Cable assembly - A 6-pin (F) connector to both a 21.3cm (8.4in) cable with a 3-pin (F) connector and a 27.2cm (10.7in) cable with a 3-pin (F) connector - RG5-3705-000CN
RG5-3706-000CN CABLE - Feed/registration sensor assembly cable - RG5-3706-000CN
RG5-3708-000CN CABLE - Cable assembly - A 38-pin (F) connector to a 14cm (5.5in) ribbon cable with a 26-pin (F) connector, a 20cm (7.9in) ribbon cable with a 10-pin (F) connector, and a 34.6cm (13.6in) 2 wire cable with a 2-pin (F) connector - RG5-3708-000CN
RG5-3709-000CN CABLE - Main motor cable - RG5-3709-000CN
RG5-3710-000CN CABLE - Paper feeder module cable - RG5-3710-000CN
RG5-3711-000CN CABLE - Optical sensor cable - RG5-3711-000CN
RG5-3822-000CN CABLE - Paper feeder cable - RG5-3822-000CN
RG5-3876-000CN CABLE - Cable assembly with ferrite - A 13-pin (F) connector, a 6-pin (F) connector, a 4-pin (F) connector, and three 3-pin (F) connectors - 38.4cm (15.1in) long - RG5-3876-000CN
5184-5218 CARTRIDGE - Black toner (EP) cartridge - With 'Micro-Fine' toner - Has standard capacity toner (Prints approximately 6, 000 pages) - 5184-5218
C4127A CARTRIDGE - Black toner (EP) cartridge - With 'Micro-Fine' toner - Has standard capacity toner (Prints approximately 6, 000 pages) - C4127A
C4127X CARTRIDGE - Black toner (EP) cartridge - With 'Micro-Fine' toner - Has maximum capacity toner (Prints approximately 10,000 pages) - C4127X
5090-3379 CLEANER - Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills - 5090-3379
RB1-8848-000CN CLIP - Left side panel retainer clip - RB1-8848-000CN
RB1-8860-000CN CLIP - Right side panel retainer clip - RB1-8860-000CN
XD2-1100-502CN CLIP - E-ring clip for HP Color LaserJet 1500 Series - XD2-1100-502CN
RB1-8974-000CN CLUTCH - Separation roller clutch - Torque limiter - RB1-8974-000CN
RG5-3712-000CN CONNECTOR - Lower tray connector and cable - RG5-3712-000CN
VS1-6174-006CN CONNECTOR - Feed drive assembly connector - VS1-6174-006CN
VS1-6176-006CN CONNECTOR - 250/500 sheet feeder connector - VS1-6176-006CN
RG5-2666-000CN CONTROL_PANEL - Control Panel - Does Not Include Overlay - RG5-2666-000CN
RG5-5372-050CN CONTROL_PANEL - Control panel - Does not include overlay - RG5-5372-050CN
C4119-67902 COUPLER - Coupler kit - Contains pickup roller coupler, four paper tray load limit clips and installation instruction sheet - C4119-67902
RB1-8945-000CN COUPLER - Separation roller/gear coupler - RB1-8945-000CN
5851-2583 COVER - EIO slot cover - Installs on formatter boards without JetDirect PCA - 5851-2583
C4232-60101 COVER - Dust cover - For use with models featuring a standard 1X500 paper tray - C4232-60101
C4232A COVER - Dust Cover - Used on Models With Standard 1X500 Paper Tray - C4232A
C4233-60101 COVER - Dust cover - For use with models featuring standard 2X250 paper trays - C4233-60101
C4233A COVER - Dust Cover - Used on Models With Standard 2X250 Paper Trays - C4233A
C4234-60101 COVER - Dust cover - For use with optional 500-sheet feeder on LJ4000/4050/4100 models using 1X500 or 2X250 paper trays - C4234-60101
C4234A COVER - Dust cover - For use with optional 500-sheet feeder on LJ4000/4050/4100 models using 1X500 or 2X250 paper trays - C4234A
RB1-8706-000CN COVER - Main cooling fan cover - RB1-8706-000CN
RB1-8805-000CN COVER - Rear fuser cover panel - RB1-8805-000CN
RB1-8858-000CN COVER - Formatter board cover panel - RB1-8858-000CN
RB1-8886-000CN COVER - Feeder PC board cover - RB1-8886-000CN
RB1-9044-000CN COVER - Top cover - Duplexer access top cover - RB1-9044-000CN
RB1-9045-000CN COVER - Duplexer rear cover panel - RB1-9045-000CN
RB1-9047-000CN COVER - Right side duplexer cover - RB1-9047-000CN
RB2-2386-000CN COVER - Envelope feeder drive cover - RB2-2386-000CN
RF5-1876-000CN COVER - Left side duplexer cover - With connector - RF5-1876-000CN
RG5-2663-040CN COVER - Top Cover Assembly - Does Not Include Control Panel - RG5-2663-040CN
RG5-2663-090CN COVER - Plate cover for HP LaserJet 4100 Series - RG5-2663-090CN
RG5-2664-070CN COVER - Right front cover assembly - Mounts bedie the formatter panel - RG5-2664-070CN
RG5-2665-000CN COVER - Left side cover assembly - Includes panel retainer clip - RG5-2665-000CN
RG5-2668-120CN COVER - Right side feeder cover - RG5-2668-120CN
RG5-2669-050CN COVER - Feeder cover left side - Tray 2 - RG5-2669-050CN
C4118-67907 DOOR - Tray 1 door assembly kit - New style pull-out tray with extension and new spring - Includes instructions - C4118-67907
RG5-2653-020CN DRIVE_ASSEMBLY - Print drive gear assembly - RG5-2653-020CN
RG5-2690-000CN DRIVE_ASSEMBLY - Optional 500 sheet paper pickup drive assembly - RG5-2690-000CN
RG5-3721-000CN DRIVE_ASSEMBLY - Delivery drive assembly - RG5-3721-000CN
C4123-69001 DUPLEXER - Duplexer assembly - C4123-69001
C4123A DUPLEXER - Duplexer assembly - For two sided printing - C4123A
RH7-1334-000CN FAN - Main cooling fan - RH7-1334-000CN
RH7-1361-000CN FAN - Tubeaxial fan - 24VDC - RH7-1361-000CN
C4122-69001 FEEDER - Envelope feeder assembly - C4122-69001
C4122A FEEDER - Power envelope feeder - Holds 75 monarch, C5, DL, B5, or COM10 envelopes - C4122A
C8053-69002 FEEDER - Power envelope feeder - Holds 75 monarch, C5, DL, B5, or COM10 envelopes - C8053-69002
RG5-2651-090CN FEEDER - Paper feed assembly - RG5-2651-090CN
C4286A FLASH_CARD - 2MB flash DIMM memory - Font storage device - C4286A
C4287A FLASH_CARD - 4MB flash DIMM memory - Font storage device - C4287A
RB1-8107-000CN FOOT - Rubber foot - Replacement rubber foot for the bottom of the printer (four used) - RB1-8107-000CN
RG5-2687-000CN FRAME - Right side frame assembly - RG5-2687-000CN
RG5-2688-000CN FRAME - Left side frame assembly - RG5-2688-000CN
C4118-69011 FUSER_ASSEMBLY - Fuser Assembly - 110 volts Fuser Assembly - Bonds the toner to the paper with heat - For 110V to 127VAC operation - C4118-69011
C4118-69012 FUSER_ASSEMBLY - Fuser Assembly - 220 volts - C4118-69012
RG5-2661-000CN FUSER_ASSEMBLY - Fuser Assembly - 110 volts Fuser Assembly - Bonds the toner to the paper with heat - For 110V to 127VAC operation - RG5-2661-000CN
RG5-2661-490CN FUSER_ASSEMBLY - Fuser Assembly - 110 volts Fuser Assembly - Bonds the toner to the paper with heat - For 110V to 127VAC operation - RG5-2661-490CN
RG5-2662-500CN FUSER_ASSEMBLY - Fuser Assembly - 220 volts - RG5-2662-500CN
RB1-8948-000CN GEAR - Separation roller drive gear - RB1-8948-000CN
RS5-0911-000CN GEAR - Coupler gear for HP LaserJet 4000 Series - RS5-0911-000CN
RB1-8694-000CN GROUND - Interlock switch support ground strap - RB1-8694-000CN
RB1-8708-000CN GROUND - Gear plate ground strap - RB1-8708-000CN
RB1-8747-000CN GROUND - Registration assembly grounding plate - RB1-8747-000CN
C4251-67906 GUIDE - Paper guide kit - Includes paper guide and guide support for 500 sheet feeder - C4251-67906
RB1-8704-030CN GUIDE - Bottom cable guide - RB1-8704-030CN
RB1-8757-000CN GUIDE - Gear assembly plate cable guide - RB1-8757-000CN
RB1-8862-000CN GUIDE - Formatter/control panel cable guide - RB1-8862-000CN
RB1-8873-000CN GUIDE - Paper Guide Support - this is the bigger piece showing on the diagram. (guide only part number is RB1-8890-000CN). - RB1-8873-000CN
RB1-8890-000CN GUIDE - Paper guide - Includes paper guide for 500 sheet feeder. (For bigger item please order RB1-8873-000CN). - RB1-8890-000CN
RB1-8924-000CN GUIDE - Optional lower cassette support guide - RB1-8924-000CN
RG5-2643-160CN GUIDE - Paper feed guide assembly - RG5-2643-160CN
C2985-60008 HARD_DRIVE - 3.5GB EIO hard drive - LaserJet EIO font/print job storage - C2985-60008
C2985-61021 HARD_DRIVE - 20GB EIO hard drive - LaserJet EIO font/print job storage - C2985-61021
C2985-61031 HARD_DRIVE - 3.5GB EIO hard drive - LaserJet EIO font/print job storage - C2985-61031
C2985-69031 HARD_DRIVE - 3.5GB EIO hard drive - LaserJet EIO font/print job storage - C2985-69031
RB1-8703-000CN HARDWARE - Module attachment screw - Long screw with shoulder at bottom - RB1-8703-000CN
XA9-0917-000CN HARDWARE - Feed module screw - M3 x 16mm - XA9-0917-000CN
RB1-8689-000CN HOLDER - Cable holder for HP LaserJet 4000 Series - RB1-8689-000CN
RB1-8690-000CN HOLDER - Toner cartridge sensing spring retainer - RB1-8690-000CN
RB1-2190-000CN HOOK - Pickup roller spring hook - RB1-2190-000CN
RB1-9009-000CN INDICATOR - Level indicator - Small oval button on front left side of tray - Moves vertically to show amount of paper in tray - RB1-9009-000CN
RB1-8838-000CN INSULATOR - Sheet insulator - Plastic sheet between PCA and metal plate - RB1-8838-000CN
C4118-69005 LASER_SCANNER - Laser/scanner assembly - C4118-69005
C3094A LASERJET - Hp printer laserJet 4000 - C3094A
RB1-8846-000CN LATCH - Rear output tray - Drop down release latch - RB1-8846-000CN
RB1-8887-000CN LEVER - Tray size sensing lever assembly - RB1-8887-000CN
RB1-8961-000CN LIFTER - Arm lifter - White plastic arm that holds top left side metal corner piece up when loading paper in tray - RB1-8961-000CN
RB1-8962-000CN LIFTER - Arm lifter - White plastic arm that holds top right side metal corner piece up when loading paper in tray - RB1-8962-000CN
C4118-67909 MAINTENANCE_KIT - LaserJet 4000 series Maintenance kit (120V) - Includes (new) 120VAC Fuser Assembly, transfer roller, six pickup/separation rollers, MP Tray/Tray 1 pickup roller, vinyl gloves, and instruction guide - C4118-67909
C4118-67910 MAINTENANCE_KIT - Maintenance kit (220V) - Includes (new) 220VAC Fuser Assembly, transfer roller, six pickup/separation rollers, MP Tray/Tray 1 pickup roller, vinyl gloves, and instruction guide - C4118-67910
C4118-69001 MAINTENANCE_KIT - Maintenance kit (120V) - Includes 120VAC Fuser Assembly, transfer roller, six pickup/separation rollers, MP Tray/Tray 1 pickup roller, vinyl gloves, and instruction guide - C4118-69001
C4118-69002 MAINTENANCE_KIT - Maintenance kit (220V) - Includes 220VAC Fuser Assembly, transfer roller, six pickup/separation rollers, MP Tray/Tray 1 pickup roller, vinyl gloves, and instruction guide - C4118-69002
C7851A MAINTENANCE_KIT - Maintenance kit (120V) - Includes (new) 120VAC Fuser Assembly, transfer roller, six pickup/separation rollers, MP Tray/Tray 1 pickup roller, vinyl gloves, and instruction guide - C7851A
C7852A MAINTENANCE_KIT - Maintenance kit (220V) - Includes (new) 220VAC Fuser Assembly, transfer roller, six pickup/separation rollers, MP Tray/Tray 1 pickup roller, vinyl gloves, and instruction guide - C7852A
C4118-61101 MANUAL - Self-paced training kit for LaserJet 4000 - Includes NTSC video, service manual bundle, user manual bundle, and five additional student guides - C4118-61101
C4118-67905 MANUAL - Self paced training kit for laser Jet 4000 family - Includes NTSC format video (VHS) and five student guides - C4118-67905
C4118-91026 MANUAL - Send RFQ below for updated Price and Description - C4118-91026
C4118-91028 MANUAL - Manual for LaserJet 4000 Series, LaserJet 4050 Series - C4118-91028
C6072-60301 MANUAL - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (English) - C6072-60301
C4118-99051 MANUALKIT - Manual Kit for LaserJet 4050 Series, LaserJet 4000 Series - C4118-99051
C4118-99052 MANUALKIT - Manual Kit for LaserJet 4000 Series, LaserJet 4050 Series - C4118-99052
C4118-99053 MANUALKIT - Manual Kit for LaserJet 4000 Series, LaserJet 4050 Series - C4118-99053
C4118-99054 MANUALKIT - Manual Kit for LaserJet 4000 Series, LaserJet 4050 Series - C4118-99054
C4118-99055 MANUALKIT - Manual Kit for LaserJet 4000 Series, LaserJet 4050 Series - C4118-99055
C4118-99056 MANUALKIT - Manual Kit for LaserJet 4000 Series, LaserJet 4050 Series - C4118-99056
C4118-99057 MANUALKIT - Manual Kit for LaserJet 4050 Series, LaserJet 4000 Series - C4118-99057
C4118-99058 MANUALKIT - Manual Kit for LaserJet 4000 Series, LaserJet 4050 Series - C4118-99058
C4118-99059 MANUALKIT - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (Norwegian) - C4118-99059
C4118-99060 MANUALKIT - Manual Kit for LaserJet 4000 Series, LaserJet 4050 Series - C4118-99060
C4118-99061 MANUALKIT - Manual Kit for LaserJet 4000 Series, LaserJet 4050 Series - C4118-99061
C4118-99062 MANUALKIT - Manual Kit for LaserJet 4000 Series, LaserJet 4050 Series - C4118-99062
C4118-99063 MANUALKIT - Manual Kit for LaserJet 4000 Series, LaserJet 4050 Series - C4118-99063
C4118-99064 MANUALKIT - Manual Kit for LaserJet 4000 Series, LaserJet 4050 Series - C4118-99064
C4118-99065 MANUALKIT - Manual Kit for LaserJet 4050 Series, LaserJet 4000 Series - C4118-99065
C4118-99066 MANUALKIT - Manual Kit for LaserJet 4000 Series, LaserJet 4050 Series - C4118-99066
C4118-99067 MANUALKIT - Manual Kit for LaserJet 4000 Series, LaserJet 4050 Series - C4118-99067
C4118-99068 MANUALKIT - Manual Kit for LaserJet 4000 Series, LaserJet 4050 Series - C4118-99068
C4118-99069 MANUALKIT - Manual Kit for LaserJet 4000 Series, LaserJet 4050 Series - C4118-99069
C4118-99070 MANUALKIT - Manual Kit for LaserJet 4000 Series, LaserJet 4050 Series - C4118-99070
C4118-99071 MANUALKIT - Manual Kit for LaserJet 4050 Series, LaserJet 4000 Series - C4118-99071
C4118-99072 MANUALKIT - Manual Kit for LaserJet 4000 Series, LaserJet 4050 Series - C4118-99072
C4118-99073 MANUALKIT - Manual Kit for LaserJet 4000 Series, LaserJet 4050 Series - C4118-99073
C4118-99074 MANUALKIT - Manual Kit for LaserJet 4000 Series, LaserJet 4050 Series - C4118-99074
C4135A MEMORY - 4MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module - C4135A
C4136A MEMORY - 8MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module - C4136A
C4137A MEMORY - 16MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module - C4137A
C4292A MEMORY - 8MB Traditional Chinese MROM DIMM - For LaserJet printers - C4292A
C4293A MEMORY - 8MB simplified Chinese MROM DIMM - For LaserJet printers - C4293A
C7842A MEMORY - 4MB, 100-pin SDRAM DIMM memory module - C7842A
C7842AX MEMORY - 8MB, 100MHz SDRAM DIMM memory module - C7842AX
C7843A MEMORY - 16MB, 100-pin SDRAM DIMM memory module - C7843A
C7845A MEMORY - 32MB, 100-pin SDRAM DIMM memory module - C7845A
Q7707AX MEMORY - 32MB, 100-pin SDRAM DIMM memory module - Q7707AX
RH7-1331-000CN MOTOR - Main motor assembly - RH7-1331-000CN
RB1-9095-020CN MOUNT - Envelope mount - Pivotal holder for envelope weight - RB1-9095-020CN
0410-4371 OTHER_PARTS - Xtal 39.85 for HP C3094A - 0410-4371
9100-5196 OTHER_PARTS - XFMR-Pulse for HP C3094A - 9100-5196
C4118-40002 OVERLAY - LaserJet 4000 control panel overlay (English) - C4118-40002
C4118-40007 OVERLAY - LaserJet 4000 control panel overlay (French) - C4118-40007
C4118-40008 OVERLAY - LaserJet 4000 control panel overlay (Italian) - C4118-40008
C4118-40009 OVERLAY - LaserJet 4000 control panel overlay (Portuguese) - C4118-40009
C4118-40010 OVERLAY - LaserJet 4000 control panel overlay (Norwegian) - C4118-40010
C4118-40011 OVERLAY - LaserJet 4000 control panel overlay (Hungarian) - C4118-40011
C4118-40012 OVERLAY - LaserJet 4000 control panel overlay (Swedish) - C4118-40012
C4118-40013 OVERLAY - LaserJet 4000 control panel overlay (Polish) - C4118-40013
C4118-40014 OVERLAY - LaserJet 4000 control panel overlay (Russian) - C4118-40014
C4118-40015 OVERLAY - LaserJet 4000 control panel overlay (Czechoslovakian) - C4118-40015
C4118-40017 OVERLAY - LaserJet 4000 control panel overlay (Korean) - C4118-40017
C4118-40018 OVERLAY - LaserJet 4000 control panel overlay (Simplified Chinese) - C4118-40018
C4118-40019 OVERLAY - LaserJet 4000 control panel overlay (Traditional Chinese) - C4118-40019
C4118-40020 OVERLAY - LaserJet 4000 control panel overlay (German) - C4118-40020
C4118-40021 OVERLAY - LaserJet 4000 control panel overlay (Spanish) - C4118-40021
C4118-40022 OVERLAY - LaserJet 4000 control panel overlay (Danish) - C4118-40022
C4118-40023 OVERLAY - LaserJet 4000 control panel overlay (Dutch) - C4118-40023
C4118-40024 OVERLAY - LaserJet 4000 control panel overlay (Greek) - C4118-40024
C4118-40025 OVERLAY - LaserJet 4000 control panel overlay (Finnish) - C4118-40025
C4118-40026 OVERLAY - LaserJet 4000 control panel overlay (Turkish) - C4118-40026
C4118-40027 OVERLAY - LaserJet 4000 control panel overlay (Hebrew) - C4118-40027
C4118-40028 OVERLAY - LaserJet 4000 control panel overlay (Arabic) - C4118-40028
C4118-40029 OVERLAY - LaserJet 4000 control panel overlay (Japanese) - C4118-40029
C4118-40030 OVERLAY - LaserJet 4000 control panel overlay (Thailand) - C4118-40030
RF5-3086-000CN PAD - Separation pad for tray 1 pickup assembly - RF5-3086-000CN
RG5-5281-020CN PAD_TRAY - Separation pad assembly, with black pastic arms. Pad is for Tray 1 pickup assembly - RG5-5281-020CN
RB1-8841-000CN PANEL - Toner cartridge access panel - RB1-8841-000CN
RB1-8947-000CN PANEL - Separation roller access panel - RB1-8947-000CN
RB2-2400-000CN PANEL - Left duplex access panel - Covers the left duplexer mount - RB2-2400-000CN
RB2-2401-000CN PANEL - Right duplex access panel - Covers the right duplexer mount - RB2-2401-000CN
RG5-2648-110CN PAPER_OUTPUT_UNIT - Paper delivery assembly - RG5-2648-110CN
C4118-67908 PC_BOARD - Formatter board assembly - C4118-67908
C4118-69008 PC_BOARD - Formatter board assembly - C4118-69008
C4118-69009 PC_BOARD - Engine controller board - Provides all power supply and motor control functions, including power switch - 110 volts - Does not include insulator sheet or bottom metal plate - C4118-69009
C4118-69010 PC_BOARD - Engine controller board - Provides all power supply and motor control functions - 220 volt - Does not include insulator sheet or bottom metal plate - C4118-69010
RG5-2673-000CN PC_BOARD - Lower tray logic PCA - With tray size switches for 500 sheet feeder. ( for 250 sheet feeder RG5-2685-000CN). - RG5-2673-000CN
RG5-3693-080CN PC_BOARD - Engine controller board - Provides all power supply and motor control functions, including power switch - 110 volts - Does not include insulator sheet or bottom metal plate - RG5-3693-080CN
RG5-3694-080CN PC_BOARD - Engine controller board - Provides all power supply and motor control functions - 220 volt - Does not include insulator sheet or bottom metal plate - RG5-3694-080CN
RG5-3821-000CN PC_BOARD - Lower tray logic PCA - With tray size switches for 500 sheet feeder. ( for 250 sheet feeder RG5-2685-000CN). - RG5-3821-000CN
RG5-2655-360CN PICKUP_ASSEMBLY - Tray 1 paper pickup assembly - Complete assembly including pickup roller, separation pad, sensor arm, retaining arm and drive solenoid - RG5-2655-360CN
RG5-2672-140CN PICKUP_ASSEMBLY - 500 sheet paper pickup drive assembly - RG5-2672-140CN
RB1-9371-000CN PLATE - Adjustable paper length stop plate - RB1-9371-000CN
RB2-2404-000CN PLATE - Cover plate - Metal bottom plate that attaches to the engine controller PC board - RB2-2404-000CN
RB2-2405-000CN PLATE - Control panel ground plate - Metal clip that provides the ground connection for control panel - RB2-2405-000CN
RF5-1867-000CN PLATE - Pre-transfer ground plate assembly - RF5-1867-000CN
RF5-2496-000CN PLATE - Coupler gear mounting plate - RF5-2496-000CN
RG5-2670-000CN PLATE - Lower base plate - Bottom plate of 500 sheet feeder - RG5-2670-000CN
RB1-8928-000CN PLUNGER - Tray identifier plunger - Identifies tray number installed - RB1-8928-000CN
8120-6802 POWER_CORD - Power cord (Flint Gray) - 2.3m (7.5ft) long - Has 90 degree (F) receptacle (for 220V in Europe, Saudi Arabia, South Africa, and India) - 8120-6802
8120-6805 POWER_CORD - Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has 90 degree receptacle (for 120V in the USA, Canada, Mexico, Philippines, and Taiwan) - 8120-6805
C7833-60102 POWER_MODULE - Power supply module - 100-240VAC input, 50-60Hz - 24VDC output, 2.7A, 65 watts - Includes detachable AC power cord for use in North America (flat blade, polarized, ungrounded) - C7833-60102
J3110A PRINT_SERVER - Ethernet 10Base-T (RJ-45) EIO network GENUINE HP JETDIRECT 600N internal print server PC board - J3110A
J3111-61001 PRINT_SERVER - JetDirect 600N EIO internal print server 10Base-T, 10BASE-2, and LocalTalk LAN interface board - Has one RJ-45, BNC, and 8-pin DIN connector - J3111-61001
J3111-69001 PRINT_SERVER - JetDirect 600N EIO internal print server 10Base-T, 10BASE-2, and LocalTalk LAN interface board - Has one RJ-45, BNC, and 8-pin DIN connector - J3111-69001
J3111A PRINT_SERVER - Ethernet 10Base-T/10Base2 and LocalTalk (RJ-45, BNC, LocalTalk) EIO network PCA - J3111A
J3112A PRINT_SERVER - JetDirect 600N token ring LAN interface board - DB-9 and RJ-45 connectors - J3112A
J3113-61001 PRINT_SERVER - JetDirect 600N EIO Internal Print Server internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - J3113-61001
J4135-61001 PRINT_SERVER - JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port - J4135-61001
J4135A PRINT_SERVER - JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port - Plugs in one of the EIO slots on selected DesignJet and LaserJet printers - J4135A
J4167A PRINT_SERVER - JetDirect 610N token ring LAN interface board - DB-9 and RJ-45 connectors - J4167A
J6057A PRINT_SERVER - JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector - J6057A
J6057AR PRINT_SERVER - Interface (Product) for Digital Sender 9100C, DeskJet 2200 Series, LaserJet 4000 Series, Color LaserJet 8500 Series - J6057AR
J7934G PRINT_SERVER - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - J7934G
RG5-3696-000CN RECEPTACLE - AC power receptacle - Connector and housing assembly - RG5-3696-000CN
RB1-8756-000CN ROD - Toner cartridge drive rod - RB1-8756-000CN
H3969-60001 ROLLER - Paper path roller kit - Includes pickup D rollers (8 each) , Feed/Separation rollers (4 each) and Tray 1 pickup roller (1 each) - Installation procedure requires use of service manual - H3969-60001
RB1-8865-000CN ROLLER - Paper pickup roller (D-shaped) - Sold individually - RB1-8865-000CN
RB1-8877-000CN ROLLER - Pickup Roller Coupler - RB1-8877-000CN
RB9-0684-000CN ROLLER - Fuser Assembly pressure roller - RB9-0684-000CN
RF5-1885-000CN ROLLER - Feed/separation roller - Roller is gray with blue tab protruding out one side - RF5-1885-000CN
RF5-2484-000CN ROLLER - Pickup roller assembly - RF5-2484-000CN
RG5-2652-170CN ROLLER - Registration assembly - RG5-2652-170CN
RG5-3718-000CN ROLLER - Tray 1 pickup roller assembly - D-shaped roller with blue shaft lock latch - RG5-3718-000CN
RG5-4283-000CN ROLLER - Transfer roller assembly - Long metal shaft with Black roller and drive gear - Transfers static charge to the media being printed on - RG5-4283-000CN
RG5-4290-100CN ROLLER - Fusing roller - Heating element and film sleeve - 110V - RG5-4290-100CN
RG5-4291-100CN ROLLER - Fusing roller - Heating element and film sleeve - 220V - RG5-4291-100CN
RG5-2642-000CN SENSOR - Registration and feed sensors assembly - Includes PS102/103 - RG5-2642-000CN
WG8-5624-000CN SENSOR - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated - WG8-5624-000CN
C3094A-Manual SERVICE_GUIDE - HP LaserJet 4000 Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. - C3094A-Manual
RB1-8674-000CN SHAFT - Belt drive shaft - RB1-8674-000CN
C6072-60304 SOFTWARE - Software for LaserJet II, LaserJet III, LaserJet 4 Series, LaserJet 4L Series - C6072-60304
C6072-60305 SOFTWARE - Software for LaserJet 8000 Series, Color LaserJet 4500 Series, LaserJet 5000 Series, LaserJet 4000 Series - C6072-60305
C6072-60306 SOFTWARE - Software for LaserJet 2100 Series, LaserJet 3100 Series, LaserJet 6P Series, LaserJet 8100 Series - C6072-60306
C6072-60307 SOFTWARE - Software for LaserJet II, LaserJet III, LaserJet 4 Series, LaserJet 4L Series - C6072-60307
RH7-5172-000CN SOLENOID - Tray 1 paper pickup drive solenoid - RH7-5172-000CN
RF5-2489-000CN SPINDLE - Separation roller mounting assembly - RF5-2489-000CN
RB1-8693-000CN SPRING - Toner cartridge drum ground spring - RB1-8693-000CN
RB1-8695-000CN SPRING - Toner cartridge sensing spring - RB1-8695-000CN
RB1-8702-000CN SPRING - Laser shutter spring - Provides tension for laser shutter - RB1-8702-000CN
RB1-8827-000CN SPRING - Leaf spring for HP LaserJet 4050 Series - RB1-8827-000CN
RB1-8847-000CN SPRING - Rear tray latch release spring - RB1-8847-000CN
RB1-8927-000CN SPRING - Left side frame leaf spring - RB1-8927-000CN
RS5-2632-000CN SPRING - Tension spring - Provides tension for pickup roller - RS5-2632-000CN
RS5-2652-000CN SPRING - Tray lock spring - RS5-2652-000CN
RS5-2967-000CN SPRING - Compression spring for tray identifier plunger - RS5-2967-000CN
RS5-2981-000CN SPRING - Paper stop spring - Provides tension for tray plate stop - RS5-2981-000CN
C7833-40012 STOP - Upper fold chute stop - Used to set the position of the upper fold on the paper (or form) - Has '1-4' fold indicators - Inserts in the top of the print-to-mail accessory - C7833-40012
C7833-40013 STOP - Lower fold chute stop - Used to set the position of the lower fold on the paper (or form) - Has 'A-D' fold indicators - Inserts below the output bin slot on the print-to-mail accessory - C7833-40013
RB1-9374-000CN STOP - Tray paper stop - Locks paper length plate in slot - RB1-9374-000CN
RF5-2760-000CN STOP - Paper stop for 500 sheet tray - RF5-2760-000CN
RB1-8671-000CN SUPPORT - Left side top cover support - RB1-8671-000CN
RG5-2645-000CN SUPPORT - Right side top cover support assembly - RG5-2645-000CN
WC4-5139-000CN SWITCH - Top cover interlock access switch - WC4-5139-000CN
C3122A TRAY - 500 sheet tray - Letter/legal/A4 sizes - Paper cassette - C3122A
C4125-67901 TRAY - 500 sheet universal paper tray assembly - This is ONLY the tray that holds the paper, NOT the optional feeder assembly (C4124A) that the printer sits on - Holds A5 to Legal size paper - Replaces C3122A Tray - C4125-67901
C4125A TRAY - LaserJet 4000/4000N Series universal paper tray - Letter to A5 size paper - This is the 500 sheet removeable tray ONLY - NOT the feeder assembly - C4125A
C4126A TRAY - LaserJet 4000T/4000TN Series universal paper tray - Letter, legal, Executive - C4126A
C7833-40015 TRAY - Output bin (Exit tray) - Holds the folded paper output - Can be adjusted for legal size forms, or the extendable portion can removed for large mailings (output drops into box) - Mounts to the rear of the pint-to-mail accessory - C7833-40015
C8055-67901 TRAY - 500-sheet paper feeder and tray/cassette - This is the frame and tray that the printer sits on top of - C8055-67901
C8055-69001 TRAY - 500-sheet paper feeder and tray/cassette - This is the frame and tray that the printer sits on top of - C8055-69001
C8056-67901 TRAY - 500-sheet tray/cassette - This is only the tray, does not include feeder or frame that tray goes into - C8056-67901
C8056-69001 TRAY - 500-sheet tray/cassette - This is only the tray, does not include feeder or frame that tray goes into - C8056-69001
RB1-8843-000CN TRAY - Rear output tray for Hewlett Packard Laserjet printers - RB1-8843-000CN
RB1-8844-000CN TRAY - Rear output tray pull-out extension - RB1-8844-000CN
RB1-9088-000CN TRAY - Envelope feeder input tray - RB1-9088-000CN
RG5-2655-100CN TRAY - Tray 1 paper pickup assembly - Complete assembly including pickup roller, separation pad, sensor arm, retaining arm and drive solenoid - RG5-2655-100CN
RG5-2656-080CN TRAY - Paper input tray (Tray 1) - Multi-Purpose tray assembly - RG5-2656-080CN
RF5-2511-000CN WEIGHT - Envelope weight - RF5-2511-000CN

bottom bar

Helpfull Links:   | HP Parts 1 2 3 4 5 | SmartSearch |
Home
       About Us       Contact Us        Support       Site Map   

Copyright© 2014 Partshere.com   Privacy Policy  Terms and Conditions     Send us your Feedback