Partshere  
Lexmark and HP New Oem and refurb parts
Partshere, Toners, HP printers and parts About Partshere Contact Partshere Partshere Support Partshere Order Status Partshere Login
 
top bar
 
Rate this page:
See HP parts for this model:

HP parts available for C3180A HP DesignJet 200 - E-size

C3191-60095 Bail - Bail assembly - Includes bail, starwheels, and brackets
1500-0855 Belt - HP Designjet 600, 650C Motor Belt (Small belt).Y axis drive belt.
1500-0856 Belt - Carriage belt for HP DesignJet 36inch size plotters.
C3180-40014 Bezel - Front panel bezel - Mounts over front panel
07575-40125 Bracket - Drive-tensioner bracket for pen carriage drive belt tensioning wedge
C1633-00132 Bracket - Encoder spring bracket
C1633-40037 Bracket - Right bail bracket
C1633-40038 Bracket - Left bail bracket for Hewlett Packard Designjet Plotters.
C1633-40093 Bracket - Encoder strip bracket
C1633-60029 Bracket - Y-drive assembly bracket
C2847-00051 Bracket - Y-tensioner bracket on left side plate
C3180-40013 Bracket - Bracket for bail switch assembly - Installed to the right side plate of the plotter
C1633-20034 Bushing - Bushing for reduction pulley
C1633-40082 Bushing - Pincharm spring retaining bushing
17255D Cable - RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long
17302A Cable - RS-232C serial cable - 25-pin (M) to 8-pin (M) DIN - 1.5m (4.9ft) long
24540-80010 Cable - Centronics (parallel) cable - 36-pin (M) to 25-pin (M) - 2.0m (6.6ft) long
24542G Cable - RS-232C serial cable - 25-pin (M) to 9-pin (F) - 3.0m (9.8ft) long
5063-1256 Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
5063-1257 Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
A6144-63008 Cable - RS-232C serial cable - 25-pin (M) to 9-pin (F) - 3.0m (9.8ft) long
C2847-60005 Cable - Power supply cable - Has 12-pin (F) connectors - 33cm (13in) long
C2847-60019 Cable - Ribbon cable - 5-pin (F) connector to 5-pin (F) connector - 40.3cm (15.9in) long
C2913A Cable - RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long
C2950A Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
C2951A Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
C2990A Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long
C2991A Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long
C3180-60007 Cable - Trailing cable for HP DesignJet 220 D size
C1633-20012 Cam - Pinch arm bar cam (E-size) - Long rod from left to right side of printer - Used to lift the pinch arms
C1633-40052 Cam - Bail lift cam - Activates the bail lift lever (part of the bail lift mechanism kit)
C3180-40020 Cam - Pinch arm cam - Attached to pinch arm (Media) lever
C3190-60149 Cam - Left cam journal - Mounted on left end of pinch arm shaft
C3180-60021 Card - Overlay and help cards for front panel - (English)
C3180-60022 Card - Overlay and help cards for front panel (Korean)
C3180-60023 Card - Overlay and help cards for front panel (Taiwan)
C3180-60024 Card - Overlay and help cards for front panel - (German)
C3180-60025 Card - Overlay and help cards for front panel - (French)
C3180-60026 Card - Overlay and help cards for front panel (Spanish)
C3180-60027 Card - Overlay and help cards for front panel - (Italian)
C3180-60028 Card - Overlay and help cards for front panel (Japanese)
C3180-60029 Card - Overlay and help cards for front panel (Portuguese)
C3180-60030 Card - Overlay and help cards for front panel (Chinese)
C1633-60120 Carriage - Carriage assembly - Includes carriage PC board
C2847-60071 Carriage - Carriage assembly - Includes carriage PC board
51626A Cartridge - HP 26A print cartridge (Black) - High capacity, 40ml volume - Prints approximately 790 pages (actual yield depends on specific use)(North America)
51626AA Cartridge - HP 26A Lge Black InkJet Crtg AP
51626AC Cartridge - HP 26A Lge Black InkJet Crtg Can
51626AL Cartridge - HP 26A Lge Black InkJet Crtg LAR
51626G Cartridge - Black Print Cartridge (Regular) - Prints Approximately
51626GA Cartridge - Black print cartridge (Regular) - Prints approximately 397 pages based on 5% density on a 8in by 10in print area (Asia/Pacific)
51626GC Cartridge - Black print cartridge (Regular) - Prints approximately 397 pages based on 5% density on a 8in by 10in print area (Canada)
51626GE Cartridge - Black print cartridge (Regular) - Prints approximately 397 pages based on 5% density on a 8in by 10in print area (Europe)
51626GL Cartridge - Black print cartridge (Regular) - Prints approximately 397 pages based on 5% density on a 8in by 10in print area (Latin America)
51626TE Cartridge - Black print cartridge (High capacity) - (2 pack of 51626AE) - Each one prints approximately 800 pages based on 5% density on a 8in by 10in print area (Europe)
51642M Cartridge - Cartridge for DesignJet-C1633A, DesignJet 600, DesignJet 650, DesignJet 200 E size
5183-5267 Cartridge - Return kit with box and instructions - For returning defective Thermal InkJet (TIJ) 2.0 cartridges
C6611AN Cartridge - Black print cartridges (high capacity) - (two-pack of 51626A) each prints approximately 800 pages based on 5% density on an 8-inch (20.3cm) by 10-inch (25.4cm) print area (USA)
1492-0145 Caster - Lockable caster assembly - Includes stem and washer
9170-1533 Clamp - Clamp - Holds ferrite in place within electronics enclosure
C3180-60010 Control Panel - Control panel - Mounts in control panel support
C1633-40003 Cover - Service station cover
C3180-40003 Cover - Left end cover assembly - For end of upper stand (Chassis)
C3180-40004 Cover - Right end cover - For end of upper stand (Chassis) assembly
C3181-00003 Cover - Electronics enclosure - The larger of the two metal covers for the area containing the main PC board and power supply
C3181-00004 Cover - Electronics enclosure - The smaller of the two metal covers for the area containing the main PC board and power supply
C3181-00005 Cover - Cover - Top center of plotter
C3181-60008 Cover - Bottom cover for HP DesignJet 200 E size
C3186-00034 Cross Brace - Cross-brace - Brace that connects and supports the two stand legs
C1633-00068 Door - Door for tensioner housing
C3180-40015 Door - Door - On right half of front panel bezel
C3180-40016 Door - Help card lock - Mounts to top of fold out front panel door
3160-0814 Fan - Tubeaxial fan (Matsushita FBK-09A12M2-MOD) - 82.5mm (3.25in) mount hole spacing, 25.5mm (1.0in) thick, 12VDC, 35.3CFM
9170-1535 Ferrite Assembly - Split ferrite - Installed inside electronics enclosure
9170-1536 Ferrite Assembly - Ferrite ring - Installed on Y-drive assembly bracket
51642A Film - Polyester matte film - 61cm (24in) x 36.6m (120ft) roll
51642C Film - Polyester matte film - B size (11 x 17-inches) - 40 sheets
51642F Film - Film (Matte) for DesignJet-C1633A, DesignJet 600, DesignJet 650, DesignJet 200 D size
51642G Film - Polyester Matte Film - D Size - 22 x 34 inches (40 Sheets)
51642H Film - Film (Matte) for DesignJet-C1633A, DesignJet 600, DesignJet 650, DesignJet 200 D size
51642J Film - Polyester matte film - Architectural D size (24 x 36-inches) - 40 sheets
51642K Film - Polyester matte film - E size (34 x 44-inches) - 40 sheets
51642N Film - Polyester matte film - Architectural E size (36 x 48-inches) - 40 sheets
C1633-40019 Gear - Overdrive gear cluster
C1633-40027 Gear - Bail engaging lever gear
C1633-40028 Gear - Bail lift cam gear
C1633-60030 Gear - Clutch / overdrive gear assembly - Includes gear, clutch, retaining clip, and two washers.
C4705-60089 Gear Assembly - Clutch / overdrive gear assembly - Includes gear, clutch, retaining clip, and two washers
C1633-00056 Guide - Trailing cable front guide (Tray)
C3181-40018 Guide - Media guide for HP DesignJet 200 E size
C3180-40017 Handle - Handle - Right side of plotter - Raise to load paper
0510-0083 Hardware - Retaining E-ring - 0.250-in diameter, steel zinc-dichromate dip
0570-1316 Hardware - Machine screw/standoff (Textron R86-20000-382) - 4-40 thread, 9.4mm long, hex head - Steel
C1633-40001 Housing - Service station housing - The base of the service station assembly
C1633-40065 Housing - Tensioner housing - Holds the tensioner wedge and tensioner spring for the carriage drive belt idler pulley
C3180-40012 Housing - Switch housing (mount) - For protecting the power switch
1818-6521 IC ROM - Masked ROM - U28 on main logic board (Rev A.01.02) - NOTE: replace EPROMs (40-pin) U4, U9, U28, and U29 with New masked ROMS (42-pin) in U28/U29 sockets and leave U4/U9 empty
1818-6522 IC ROM - Masked ROM - U29 on main logic board (Rev A.01.02) - NOTE: replace EPROMs (40-pin) U4, U9, U28, and U29 with New masked ROMS (42-pin) in U28/U29 sockets and leave U4/U9 empty
C3180-60013 Insulator - Power supply insulator - Installed over power supply board
5041-1203 Keycap - Power switch keycap (White)
C2847-60061 Kit - Hardware kit - Package of 6 screws for stand assembly
C3195-00057 Label - Safety label - Provides warning that encoder strip is sharp
C3180-40019 Latch - Latch assembly for top center cover
C2848-60002 Leg - Leg assembly - Side support with foot bar and two casters
C2847-40013 Lever - Bail engaging lever - Used to move engaging lever gear
C2858-60209 Lifter - Bail lift mechanism kit - Includes cam gear, engaging lever, engaging lever gear, engaging lever spring, Y-tensioner bracket, bail lift cam, cam gear support, screws, and washers
C1633-60033 Link - Automatic cartridge adjust linkage
6040-0855 Lubricant - SYNTHETIC OIL (Aoz Plastic Bottle) Front and Rear Slider Rods.
6040-0858 Lubricant - Lubricant : Special lubricating oil - For carriage slider rod surface - 4oz (113g) plastic bottle of synthetic oil
6040-0911 Lubricant - Special lubricating oil - For carriage slider rod surface - (syringe with 35cc oil)
C3190-60155 Lubricant - Grease - GREASE APPLICATION KITGrease - For helical gear (Drive roller gear)
C6074-60460 Lubricant - Grease - GREASE APPLICATION KITGrease - For helical gear (Drive roller gear)
5182-7322 Maintenance Kit - Maintenance kit
07595-90001 Manual - HP-GL Reference Guide - Programming Information
5959-9733 Manual - Manual for Designjet 820 MFP Series, DesignJet-C1633A, DesignJet 600, DesignJet 650
5960-3743 Manual - Manual for DesignJet-C1633A, DesignJet 600, DesignJet 650, DesignJet 200 D size
C3180-90001 Manual - C3180A and C3181A DesignJet plotter users guide
C3180-90002 Manual - C3180A and C3181A DesignJet plotter users guide (Korean)
C3180-90003 Manual - C3180A and C3181A DesignJet plotter users guide (Taiwan)
C3180-90004 Manual - C3180A and C3181A DesignJet plotter users guide (German)
C3180-90005 Manual - C3180A and C3181A DesignJet plotter users guide (French)
C3180-90006 Manual - C3180A and C3181A DesignJet plotter users guide (Spanish)
C3180-90007 Manual - C3180A and C3181A DesignJet plotter users guide (Italian)
C3180-90008 Manual - C3180A and C3181A DesignJet plotter users guide (Japanese)
C3180-90009 Manual - C3180A and C3181A DesignJet plotter users guide (Portuguese)
C3180-90010 Manual - C3180A and C3181A DesignJet plotter users guide (Chinese)
C3187-90000 Manual - C3180/81A and C3187/88A DesignJet plotter service manual
C6072-60281 Manual - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (English)
C6072-60301 Manual - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (English)
C1633-00019 Media Bin - Media bin back - For top of wire rack below plotter
C1633-00020 Media Bin - Media bin front - Main part of wire rack below plotter
C1633-00044 Media Bin - Media bin adjust - Adjustable media bottom stop in wire rack
C2065A Memory - 4MB, 80nS, 36-bit SIMM memory module - For HP Plotters, LaserJet IIISi, 4/4M, 4Si/MX and other models.
C2066A Memory - 8MB, 80nS, 36-bit SIMM memory module - For HP LaserJet IIISi, 4/4M, 4Si/MX
D2152-63001 Memory - 8MB, 80nS, 36-bit SIMM memory module
D2152-69001 Memory - 8MB, 80nS, 36-bit SIMM memory module
D2156-63001 Memory - 4MB, 80nS, 36-bit SIMM memory module
D2156-69001 Memory - 4MB, 80nS, 36-bit SIMM memory module
D2381-63001 Memory - 2MB, 80nS, 36-bit SIMM memory module
J2382-69003 Module - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
J2383-61005 Module - External token ring interface module - Has DB-9 connector
J2590-61011 Module - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors
J2590-69001 Module - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors
J2592-61001 Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
J2592-69001 Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
J2593-69001 Module - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) input connectors and three parallel (DB-25) output connectors w/power supply.
J2594-61011 Module - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors
J3258-61021 Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
J4102-61021 Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
J4102-69022 Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
C2847-60221 Motor - Motor assembly - Includes power cable
C2848-60003 Motor - Motor/encoder assembly (includes helical drive gear) - 'X' axis drive - NOTE: motor and gear are only sold as a set
C3180-60005 Motor - Stepper motor for HP DesignJet 200 D size
C1633-20006 Mount - 'X' axis motor mount
C3187-00011 NamePlate - Nameplate - DesignJet 200/220 printer logo
6040-0990 Oil - Special lubricating oil - For carriage slider rod surface - (5cc oil)
C3191-60138 Overdrive Assembly - Overdrive and bail kit - Includes left and right bail brackets, 14 starwheel mount assemblies, bail lift mechanism kit, overdrive roller, overdrive enclosure, media guides
C1860A Paper - HP Bright white InkJet paper - 61cm (24in) x 45.7m (150ft) roll
C3854A Paper - Opaque bond paper - Architectural E size (36 x 48-inches) - 100 sheets
C3855A Paper - Bright White Inkjet Paper - 61cm (24in) x 45.7m (150ft) roll
0950-2417 PC Board - Power supply board
C3180-69102 PC Board - Main logic board
J3258-61011 PC Board - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
J2590A PC Board Interface - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors
J2591-69001 PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
J2591A PC Board Interface - External JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
J2594-69001 PC Board Interface - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors
J3258-61041 PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
J3258B PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
J3264A PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN
J3265-69001 PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors
J3265G PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
J4101B PC Board Interface - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network
J4102B PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
C1633-60039 Pinch Assembly - Pincharm assembly - Curved black plastic plate with four small rubber rollers - Does NOT include spring or bushing
C3181-00002 Platen - Entry platen - Large structure in front of platen roller
8120-0698 Power Cord - Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in the USA and Canada)
8120-1351 Power Cord - Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei)
8120-1369 Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China)
8120-1378 Power Cord - Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam)
8120-1689 Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam)
8120-2104 Power Cord - Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Switzerland)
8120-2956 Power Cord - Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Denmark)
8120-4211 Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in South Africa and India)
8120-4753 Power Cord - Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 100V in Japan)
8120-6302 Power Cord - Daisy chain power cord (Dove Gray) - 18 AWG, 1.2m (4.0ft) long - Has C14 (M) plug for power input and C13 (F) plug for power output
8121-0877 Power Cord - Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in the USA and Canada)
0950-2372 Power Module - Power supply module - 100-240VAC input, 47-63Hz, requires separate AC power cord - 5VDC output, 1A, 5 watts
0950-3169 Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.
0950-3171 Power Module - Power supply module - 220-240VAC input, 47-53Hz - 13VDC output, 300mA (U. K. and Hong Kong)
0950-3172 Power Module - Power supply module - 240VAC input, 47-53Hz - 13VDC output, 300mA (Australia)
0950-3349 Power Module - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector Power supply module - 120VAC input, 60Hz - 12VDC output, 1.0A
0950-3350 Power Module - Wall mount power supply module (Leader Electronics 48130625HK) - 200VAC input, 48-52Hz - 13VDC output, 625mA (Hong Kong)
0950-3351 Power Module - Wall mount power supply module (MEI-AH ED12009) - 220VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (South Korea)
0950-3352 Power Module - Wall mount power supply module (MEI-AH ED12010) - 100VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (for use in Japan)
0950-3354 Power Module - Wall mount power supply module (MEI-AH ED12010) - 220-250VAC input, 47-53Hz - 13VDC output, 800mA, 10.4 watts (South Africa)
0957-2109 Power Module - Power supply module - 209-253VAC input, 47-53Hz - 13VDC output, 800mA (Europe and Israel)
0957-2110 Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.
0957-2134 Power Module - Wall mount power supply module (MEI-AH ED12010) - 100VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (for use in Japan)
0957-2197 Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.
0957-2340 Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.
0957-2481 Power Module - Pwra brk uni 12vdc 15w
5188-5676 Power Module - Power module (wall mount) - Input voltage 100VAC, 47/63Hz - Output voltage 13VDC, 800mA, 10.4 watts (for use in Japan)
5188-6700 Power Module - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector
9100-5176 Power Module - Pwer supply, 13v/300ma jpn
0950-2623 Power Supply - Switching power supply (Delta DPS-158ABA) - 100-240VAC input, 47-63Hz - Four DC outputs (5.15V, +12V, -12V, 24V) - 158 watts - Includes upgrade sticker
0957-2192 Power Supply - Power supply module - 209-253VAC input, 47-53Hz - 13VDC output, 800mA (Europe and Israel)
0957-2194 Power Supply - Wall mount power supply module (MEI-AH ED12009) - 220VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (South Korea)
0957-2228 Power Supply - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.
0957-2229 Power Supply - Power module (wall mount)- Input voltage 220-250VAC, 47/53Hz - Output voltage 13VDC, 800mA, 10.4W (Worldwide)
5188-5673 Power Supply - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector Power supply module - 120VAC input, 60Hz - 12VDC output, 1.0A
J3265A Print Server - External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
J4101-61011 Print Server - External JetDirect LAN interface module with EtherTwist 10Base-T/100BaseTX connector
07570-60105 Pulley - Idler pulley - For main drive belt
07570-60112 Pulley - Idler drive pulley - Applies tension to the pen carriage drive belt (small belt)
C3170-60009 Pulley - Reduction pulley - Includes 2 Bearings, Shaft (0.16in Diameter on Both Ends), Flange, Pulley and Instructions
C3180-60006 Receptacle - AC power receptacle assembly - Includes cable
C3181A-Repair_DesignJet Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C2859-60004 Roller - Paper drive (platen) roller assembly - Long gear driven roller
C3191-60040 Roller - Overdrive roller - Shaft with rollers - Runs width of plotter
C4700-60042 Roller - Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder
C3180-60001 Sensor - Media sensor assembly
C3180-60009 Sensor - Sensor - For lift-up view window
C3180-60034 Sensor - Pincharm sensor - Includes cable
C3190-60130 Sensor - Sensor mechanism - Does NOT include the media sensor assembly
C3181A-Manual_DesignJet Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams.
C7769-90066 Service Manual - DesignJet support DVD-ROM - Version A.04.01 - Has product information, user's manuals, service manuals, diagnostic software, test drawings, newsletters, and service notes
5960-8286 Service Parts - Shipping Material/Carton for DesignJet 200 D size, DesignJet 650, DesignJet 200 E size
C2847-60083 Service Station - Hewlett Packard Service station kit assembly for Designjet and Plotters.
C6072-60284 Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (German)
C6072-60285 Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (French)
C6072-60286 Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (Spanish)
C6072-60287 Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (Italian)
C6072-60304 Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (German)
C6072-60305 Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (French)
C6072-60306 Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Spanish)
C6072-60307 Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Italian)
1460-2061 Spring - Extension spring - Zinc plated music wire, 0.875in long, 0.187in OD, 0.020in wire diameter, 1.8 in/lb rate - For pen carriage drive belt pulley tensioning wedge
1460-2139 Spring - Compression tensioner spring - Stainless steel, passivity finish, 41.3mm long, 9.14mm OD, 42um wire diameter, 44.5 N/mm rate - Installed on shaft of tensioning wedge for carriage drive belt idler pulley
C1633-00002 Spring - Encoder strip spring - Installed on right side of plotter
C1633-80003 Spring - Blade spring - Installed on right side of trailing cable front guide
C1633-80005 Spring - Compression spring - Installed between pincharm assembly and bushing
C1633-80006 Spring - Bail engaging lever spring
C1633-80014 Spring - Compression spring - For the rear bushing on the carriage
C1633-80016 Spring - Linkage spring - Installed between Y-tensioner bracket and automatic carriage adjust linkage
C3180-80001 Spring - Window spring for HP DesignJet 200 D size
C3193A Stand - DesignJet 230/250C Optional Stand (E/A0) - Includes legs, casters, brace, wire form paper deflector, and paper bin
C4713-60035 Starwheel - Starwheel mount assembly - Includes cover, body, spring and two starwheels
C4714-60098 Strip - Encoder strip assembly (E-size) - Includes encoder strip and encoder strip spring
C2847-40015 Support - Cam gear support
C3190-40026 Support - Control panel support - will come with control panel and support.
C3180-60002 Switch - Bail switch assembly
07550-40104 Wedge - Tensioning wedge (cam tensioner) - For the pen carriage drive belt pulley
07570-40105 Wedge - Main tensioning wedge - For the carriage drive belt idler pulley
C3181-60039 Window - Lift-up viewing window assembly
C1633-40006 Wiper - Wiper pad
C3180-60014 Wiper - Wiper assembly - Includes wiper rocker, wiper rod and wiper pad

bottom bar

Helpfull Links:   | HP Printer Parts 1 2 3 4 5 | SmartSearch |
Home
       Contact Us        Support       Order Status       Site Map   

Copyright © 2016 Partshere.com   Privacy Policy     Terms and Conditions     Send us your Feedback