C3190-60095 |
Bail - Bail assembly - Includes bail, starwheels, and brackets |
1500-0855 |
Belt - HP Designjet 600, 650C Motor Belt (Small belt).Y axis drive belt. |
C2847-00029 |
Belt - Carriage belt 24in belt |
C3190-40048 |
Belt - HP Carriage belt (D-size) - Long/wide belt attached to the carriage |
C3180-40014 |
Bezel - Front panel bezel - Mounts over front panel |
07575-40125 |
Bracket - Drive-tensioner bracket for pen carriage drive belt tensioning wedge |
C1633-00132 |
Bracket - Encoder spring bracket |
C1633-40037 |
Bracket - Right bail bracket |
C1633-40038 |
Bracket - Left bail bracket for Hewlett Packard Designjet Plotters. |
C1633-40093 |
Bracket - Encoder strip bracket |
C1633-60029 |
Bracket - Y-drive assembly bracket |
C2847-00051 |
Bracket - Y-tensioner bracket on left side plate |
C3180-40013 |
Bracket - Bracket for bail switch assembly - Installed to the right side plate of the plotter |
C1633-20034 |
Bushing - Bushing for reduction pulley |
C1633-40082 |
Bushing - Pincharm spring retaining bushing |
17255D |
Cable - RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long |
17302A |
Cable - RS-232C serial cable - 25-pin (M) to 8-pin (M) DIN - 1.5m (4.9ft) long |
24540-80010 |
Cable - Centronics (parallel) cable - 36-pin (M) to 25-pin (M) - 2.0m (6.6ft) long |
24542G |
Cable - RS-232C serial cable - 25-pin (M) to 9-pin (F) - 3.0m (9.8ft) long |
5063-1256 |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
5063-1257 |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
A6144-63008 |
Cable - RS-232C serial cable - 25-pin (M) to 9-pin (F) - 3.0m (9.8ft) long |
C2847-60005 |
Cable - Power supply cable - Has 12-pin (F) connectors - 33cm (13in) long |
C2847-60019 |
Cable - Ribbon cable - 5-pin (F) connector to 5-pin (F) connector - 40.3cm (15.9in) long |
C2913A |
Cable - RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long |
C2950A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
C2951A |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
C2990A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long |
C2991A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long |
C3180-60007 |
Cable - Trailing cable for HP DesignJet 220 D size |
C1633-40052 |
Cam - Bail lift cam - Activates the bail lift lever (part of the bail lift mechanism kit) |
C2847-20005 |
Cam - Pinch arm bar cam (D-size) - Long rod from left to right side of printer - Used to lift the pinch arms |
C3180-40020 |
Cam - Pinch arm cam - Attached to pinch arm (Media) lever |
C3190-60149 |
Cam - Left cam journal - Mounted on left end of pinch arm shaft |
C3187-60001 |
Card - Overlay and help cards for front panel |
C3187-60002 |
Card - Overlay and help cards for front panel (Korean) |
C3187-60003 |
Card - Overlay and help cards for front panel (Taiwanese) |
C3187-60004 |
Card - Overlay and help cards for front panel (German) |
C3187-60005 |
Card - Overlay and help cards for front panel (French) |
C3187-60006 |
Card - Overlay and help cards for front panel - (Spanish) |
C3187-60007 |
Card - Overlay and help cards for front panel (Italian) |
C3187-60008 |
Card - Overlay and help cards for front panel - (Japanese) |
C1633-60120 |
Carriage - Carriage assembly - Includes carriage PC board |
51626A |
Cartridge - HP 26A print cartridge (Black) - High capacity, 40ml volume - Prints approximately 790 pages (actual yield depends on specific use)(North America) |
51626AA |
Cartridge - HP 26A Lge Black InkJet Crtg AP |
51626AC |
Cartridge - HP 26A Lge Black InkJet Crtg Can |
51626AL |
Cartridge - HP 26A Lge Black InkJet Crtg LAR |
51626G |
Cartridge - Black Print Cartridge (Regular) - Prints Approximately |
51626GA |
Cartridge - Black print cartridge (Regular) - Prints approximately 397 pages based on 5% density on a 8in by 10in print area (Asia/Pacific) |
51626GC |
Cartridge - Black print cartridge (Regular) - Prints approximately 397 pages based on 5% density on a 8in by 10in print area (Canada) |
51626GE |
Cartridge - Black print cartridge (Regular) - Prints approximately 397 pages based on 5% density on a 8in by 10in print area (Europe) |
51626GL |
Cartridge - Black print cartridge (Regular) - Prints approximately 397 pages based on 5% density on a 8in by 10in print area (Latin America) |
51626TE |
Cartridge - Black print cartridge (High capacity) - (2 pack of 51626AE) - Each one prints approximately 800 pages based on 5% density on a 8in by 10in print area (Europe) |
5183-5267 |
Cartridge - Return kit with box and instructions - For returning defective Thermal InkJet (TIJ) 2.0 cartridges |
C6611AN |
Cartridge - Black print cartridges (high capacity) - (two-pack of 51626A) each prints approximately 800 pages based on 5% density on an 8-inch (20.3cm) by 10-inch (25.4cm) print area (USA) |
1492-0145 |
Caster - Lockable caster assembly - Includes stem and washer |
9170-1533 |
Clamp - Clamp - Holds ferrite in place within electronics enclosure |
C3180-60010 |
Control Panel - Control panel - Mounts in control panel support |
C1633-40003 |
Cover - Service station cover |
C3180-00003 |
Cover - Electronics enclosure - The larger of the two metal covers for the area containing the main PC board and power supply |
C3180-00004 |
Cover - Electronics enclosure - The smaller of the two metal covers for the area containing the main PC board and power supply |
C3180-00005 |
Cover - Cover - Top center of plotter |
C3180-40003 |
Cover - Left end cover assembly - For end of upper stand (Chassis) |
C3180-40004 |
Cover - Right end cover - For end of upper stand (Chassis) assembly |
C3180-60008 |
Cover - Bottom cover for HP DesignJet 200 D size |
C3185-00034 |
Cross Brace - Cross-brace - Brace that connects and supports the two stand legs |
C1633-00068 |
Door - Door for tensioner housing |
C3180-40015 |
Door - Door - On right half of front panel bezel |
C3180-40016 |
Door - Help card lock - Mounts to top of fold out front panel door |
3160-0814 |
Fan - Tubeaxial fan (Matsushita FBK-09A12M2-MOD) - 82.5mm (3.25in) mount hole spacing, 25.5mm (1.0in) thick, 12VDC, 35.3CFM |
9170-1535 |
Ferrite Assembly - Split ferrite - Installed inside electronics enclosure |
9170-1536 |
Ferrite Assembly - Ferrite ring - Installed on Y-drive assembly bracket |
51642A |
Film - Polyester matte film - 61cm (24in) x 36.6m (120ft) roll |
51642C |
Film - Polyester matte film - B size (11 x 17-inches) - 40 sheets |
51642F |
Film - Film (Matte) for DesignJet-C1633A, DesignJet 600, DesignJet 650, DesignJet 200 D size |
51642G |
Film - Polyester Matte Film - D Size - 22 x 34 inches (40 Sheets) |
51642H |
Film - Film (Matte) for DesignJet-C1633A, DesignJet 600, DesignJet 650, DesignJet 200 D size |
51642J |
Film - Polyester matte film - Architectural D size (24 x 36-inches) - 40 sheets |
C1633-40019 |
Gear - Overdrive gear cluster |
C1633-40027 |
Gear - Bail engaging lever gear |
C1633-40028 |
Gear - Bail lift cam gear |
C1633-60030 |
Gear - Clutch / overdrive gear assembly - Includes gear, clutch, retaining clip, and two washers. |
C4705-60089 |
Gear Assembly - Clutch / overdrive gear assembly - Includes gear, clutch, retaining clip, and two washers |
C2847-00014 |
Guide - Trailing cable front guide (Tray) |
C3180-40018 |
Guide - Media guide for HP DesignJet 200 D size |
C3180-40017 |
Handle - Handle - Right side of plotter - Raise to load paper |
0510-0083 |
Hardware - Retaining E-ring - 0.250-in diameter, steel zinc-dichromate dip |
0570-1316 |
Hardware - Machine screw/standoff (Textron R86-20000-382) - 4-40 thread, 9.4mm long, hex head - Steel |
C1633-40001 |
Housing - Service station housing - The base of the service station assembly |
C1633-40065 |
Housing - Tensioner housing - Holds the tensioner wedge and tensioner spring for the carriage drive belt idler pulley |
C3180-40012 |
Housing - Switch housing (mount) - For protecting the power switch |
1818-6016 |
IC ROM - ROM - U28 on main logic board (Revision B.02.01) |
1818-6017 |
IC ROM - ROM - U29 on main logic board (Revision B.02.01) |
C3180-60013 |
Insulator - Power supply insulator - Installed over power supply board |
5041-1203 |
Keycap - Power switch keycap (White) |
C2847-60061 |
Kit - Hardware kit - Package of 6 screws for stand assembly |
C3195-00057 |
Label - Safety label - Provides warning that encoder strip is sharp |
C3180-40019 |
Latch - Latch assembly for top center cover |
C2847-60002 |
Leg - Leg assembly - Side support with foot bar and two casters |
C2847-40013 |
Lever - Bail engaging lever - Used to move engaging lever gear |
C2858-60209 |
Lifter - Bail lift mechanism kit - Includes cam gear, engaging lever, engaging lever gear, engaging lever spring, Y-tensioner bracket, bail lift cam, cam gear support, screws, and washers |
C1633-60033 |
Link - Automatic cartridge adjust linkage |
6040-0855 |
Lubricant - SYNTHETIC OIL (4oz Plastic Bottle) Front and Rear Slider Rods Synthetic oil - One plastic bottle of 3.5oz / 118.29 ML |
6040-0858 |
Lubricant - Lubricant : Special lubricating oil - For carriage slider rod surface - 4oz (113g) plastic bottle of synthetic oil |
6040-0911 |
Lubricant - Special lubricating oil - For carriage slider rod surface - (syringe with 35cc oil) |
C3190-60155 |
Lubricant - Grease - GREASE APPLICATION KITGrease - For helical gear (Drive roller gear) |
C6074-60460 |
Lubricant - Grease - GREASE APPLICATION KITGrease - For helical gear (Drive roller gear) |
5182-7322 |
Maintenance Kit - Maintenance kit |
07595-90001 |
Manual - HP-GL Reference Guide - Programming Information |
5959-9733 |
Manual - Manual for Designjet 820 MFP Series, DesignJet-C1633A, DesignJet 600, DesignJet 650 |
5960-3743 |
Manual - Manual for DesignJet-C1633A, DesignJet 600, DesignJet 650, DesignJet 200 D size |
C3187-90000 |
Manual - C3180/81A and C3187/88A DesignJet plotter service manual |
C3187-90001 |
Manual - C3187A and C3188A DesignJet plotter users guide (English) |
C3187-90002 |
Manual - C3187A and C3188A DesignJet plotter users guide (Korean) |
C3187-90003 |
Manual - C3187A and C3188A DesignJet plotter users guide (Thai) |
C3187-90004 |
Manual - C3187A and C3188A DesignJet plotter users guide (German) |
C3187-90005 |
Manual - C3187A and C3188A DesignJet plotter users guide (French) |
C3187-90006 |
Manual - C3187A and C3188A DesignJet plotter users guide (Spanish) |
C3187-90007 |
Manual - C3187A and C3188A DesignJet plotter users guide (Italian) |
C3187-90008 |
Manual - C3187A and C3188A DesignJet plotter users guide (Japanese) |
C3187-90009 |
Manual - C3187A and C3188A DesignJet plotter users guide (Portuguese) |
C3187-90010 |
Manual - C3187A and C3188A DesignJet plotter users guide (Chinese) |
C6072-60281 |
Manual - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (English) |
C6072-60301 |
Manual - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (English) |
C2847-00005 |
Media Bin - Media bin back - For top of wire rack below plotter |
C2847-00006 |
Media Bin - Media bin front - Main part of wire rack below plotter |
C2847-00012 |
Media Bin - Media bin adjust - Adjustable media bottom stop in wire rack |
C2065A |
Memory - 4MB, 80nS, 36-bit SIMM memory module - For HP Plotters, LaserJet IIISi, 4/4M, 4Si/MX and other models. |
C2066A |
Memory - 8MB, 80nS, 36-bit SIMM memory module - For HP LaserJet IIISi, 4/4M, 4Si/MX |
D2152-63001 |
Memory - 8MB, 80nS, 36-bit SIMM memory module |
D2152-69001 |
Memory - 8MB, 80nS, 36-bit SIMM memory module |
D2156-63001 |
Memory - 4MB, 80nS, 36-bit SIMM memory module |
D2156-69001 |
Memory - 4MB, 80nS, 36-bit SIMM memory module |
D2381-63001 |
Memory - 2MB, 80nS, 36-bit SIMM memory module |
J2382-69003 |
Module - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors |
J2383-61005 |
Module - External token ring interface module - Has DB-9 connector |
J2590-61011 |
Module - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors |
J2590-69001 |
Module - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors |
J2592-61001 |
Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
J2592-69001 |
Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
J2593-69001 |
Module - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) input connectors and three parallel (DB-25) output connectors w/power supply. |
J2594-61011 |
Module - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors |
J3258-61021 |
Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
J4102-61021 |
Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
J4102-69022 |
Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
C2847-60221 |
Motor - Motor assembly - Includes power cable |
C2848-60003 |
Motor - Motor/encoder assembly (includes helical drive gear) - 'X' axis drive - NOTE: motor and gear are only sold as a set |
C3180-60005 |
Motor - Stepper motor for HP DesignJet 200 D size |
C1633-20006 |
Mount - 'X' axis motor mount |
C3187-00011 |
NamePlate - Nameplate - DesignJet 200/220 printer logo |
6040-0990 |
Oil - Special lubricating oil - For carriage slider rod surface - (5cc oil) |
C3190-60138 |
Overdrive Assembly - Overdrive and bail kit - Includes left and right bail brackets, 10 starwheel mount assemblies, bail lift mechanism kit, overdrive roller, overdrive enclosure, media guides |
C1860A |
Paper - HP Bright white InkJet paper - 61cm (24in) x 45.7m (150ft) roll |
C3855A |
Paper - Bright White Inkjet Paper - 61cm (24in) x 45.7m (150ft) roll |
0950-2417 |
PC Board - Power supply board |
C3180-69102 |
PC Board - Main logic board |
J3258-61011 |
PC Board - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN |
J2590A |
PC Board Interface - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors |
J2591-69001 |
PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors |
J2591A |
PC Board Interface - External JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors |
J2594-69001 |
PC Board Interface - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors |
J3258-61041 |
PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN |
J3258B |
PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN |
J3264A |
PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN |
J3265-69001 |
PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors |
J3265G |
PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
J4101B |
PC Board Interface - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network |
J4102B |
PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
C1633-60039 |
Pinch Assembly - Pincharm assembly - Curved black plastic plate with four small rubber rollers - Does NOT include spring or bushing |
C3180-00002 |
Platen - Entry platen - Large structure in front of platen roller |
8120-0698 |
Power Cord - Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in the USA and Canada) |
8120-1351 |
Power Cord - Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei) |
8120-1369 |
Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China) |
8120-1378 |
Power Cord - Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam) |
8120-1689 |
Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam) |
8120-2104 |
Power Cord - Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Switzerland) |
8120-2956 |
Power Cord - Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Denmark) |
8120-4211 |
Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in South Africa and India) |
8120-4753 |
Power Cord - Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 100V in Japan) |
8120-6302 |
Power Cord - Daisy chain power cord (Dove Gray) - 18 AWG, 1.2m (4.0ft) long - Has C14 (M) plug for power input and C13 (F) plug for power output |
8121-0877 |
Power Cord - Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in the USA and Canada) |
0950-2372 |
Power Module - Power supply module - 100-240VAC input, 47-63Hz, requires separate AC power cord - 5VDC output, 1A, 5 watts |
0950-3169 |
Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories. |
0950-3171 |
Power Module - Power supply module - 220-240VAC input, 47-53Hz - 13VDC output, 300mA (U. K. and Hong Kong) |
0950-3172 |
Power Module - Power supply module - 240VAC input, 47-53Hz - 13VDC output, 300mA (Australia) |
0950-3349 |
Power Module - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector Power supply module - 120VAC input, 60Hz - 12VDC output, 1.0A |
0950-3350 |
Power Module - Wall mount power supply module (Leader Electronics 48130625HK) - 200VAC input, 48-52Hz - 13VDC output, 625mA (Hong Kong) |
0950-3351 |
Power Module - Wall mount power supply module (MEI-AH ED12009) - 220VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (South Korea) |
0950-3352 |
Power Module - Wall mount power supply module (MEI-AH ED12010) - 100VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (for use in Japan) |
0950-3354 |
Power Module - Wall mount power supply module (MEI-AH ED12010) - 220-250VAC input, 47-53Hz - 13VDC output, 800mA, 10.4 watts (South Africa) |
0957-2109 |
Power Module - Power supply module - 209-253VAC input, 47-53Hz - 13VDC output, 800mA (Europe and Israel) |
0957-2110 |
Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories. |
0957-2134 |
Power Module - Wall mount power supply module (MEI-AH ED12010) - 100VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (for use in Japan) |
0957-2197 |
Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories. |
0957-2340 |
Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories. |
0957-2481 |
Power Module - Pwra brk uni 12vdc 15w |
5188-5676 |
Power Module - Power module (wall mount) - Input voltage 100VAC, 47/63Hz - Output voltage 13VDC, 800mA, 10.4 watts (for use in Japan) |
5188-6700 |
Power Module - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector |
9100-5176 |
Power Module - Pwer supply, 13v/300ma jpn |
0950-2623 |
Power Supply - Switching power supply (Delta DPS-158ABA) - 100-240VAC input, 47-63Hz - Four DC outputs (5.15V, +12V, -12V, 24V) - 158 watts - Includes upgrade sticker |
0957-2192 |
Power Supply - Power supply module - 209-253VAC input, 47-53Hz - 13VDC output, 800mA (Europe and Israel) |
0957-2194 |
Power Supply - Wall mount power supply module (MEI-AH ED12009) - 220VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (South Korea) |
0957-2228 |
Power Supply - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories. |
0957-2229 |
Power Supply - Power module (wall mount)- Input voltage 220-250VAC, 47/53Hz - Output voltage 13VDC, 800mA, 10.4W (Worldwide) |
5188-5673 |
Power Supply - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector Power supply module - 120VAC input, 60Hz - 12VDC output, 1.0A |
J3265A |
Print Server - External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
J4101-61011 |
Print Server - External JetDirect LAN interface module with EtherTwist 10Base-T/100BaseTX connector |
07570-60105 |
Pulley - Idler pulley - For main drive belt |
07570-60112 |
Pulley - Idler drive pulley - Applies tension to the pen carriage drive belt (small belt) |
C3170-60009 |
Pulley - Reduction pulley - Includes 2 Bearings, Shaft (0.16in Diameter on Both Ends), Flange, Pulley and Instructions |
C3180-60006 |
Receptacle - AC power receptacle assembly - Includes cable |
C3187A-Repair_DesignJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
C3190-60040 |
Roller - Overdrive roller - Shaft with rollers - Runs the width of the plotter |
C4699-60042 |
Roller - Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder |
C3180-60001 |
Sensor - Media sensor assembly |
C3180-60009 |
Sensor - Sensor - For lift-up view window |
C3180-60034 |
Sensor - Pincharm sensor - Includes cable |
C3190-60130 |
Sensor - Sensor mechanism - Does NOT include the media sensor assembly |
C3187A-Manual_DesignJet |
Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. |
C7769-90066 |
Service Manual - DesignJet support DVD-ROM - Version A.04.01 - Has product information, user's manuals, service manuals, diagnostic software, test drawings, newsletters, and service notes |
C2847-60083 |
Service Station - Hewlett Packard Service station kit assembly for Designjet and Plotters. |
C6072-60284 |
Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (German) |
C6072-60285 |
Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (French) |
C6072-60286 |
Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (Spanish) |
C6072-60287 |
Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (Italian) |
C6072-60304 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (German) |
C6072-60305 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (French) |
C6072-60306 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Spanish) |
C6072-60307 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Italian) |
1460-2061 |
Spring - Extension spring - Zinc plated music wire, 0.875in long, 0.187in OD, 0.020in wire diameter, 1.8 in/lb rate - For pen carriage drive belt pulley tensioning wedge |
1460-2139 |
Spring - Compression tensioner spring - Stainless steel, passivity finish, 41.3mm long, 9.14mm OD, 42um wire diameter, 44.5 N/mm rate - Installed on shaft of tensioning wedge for carriage drive belt idler pulley |
C1633-00002 |
Spring - Encoder strip spring - Installed on right side of plotter |
C1633-80003 |
Spring - Blade spring - Installed on right side of trailing cable front guide |
C1633-80005 |
Spring - Compression spring - Installed between pincharm assembly and bushing |
C1633-80006 |
Spring - Bail engaging lever spring |
C1633-80014 |
Spring - Compression spring - For the rear bushing on the carriage |
C1633-80016 |
Spring - Linkage spring - Installed between Y-tensioner bracket and automatic carriage adjust linkage |
C3180-80001 |
Spring - Window spring for HP DesignJet 200 D size |
C3192A |
Stand - DesignJet 230/250C Optional Stand (D/A1) - Includes legs, casters and brace - Does NOT include the paper bin |
C4713-60035 |
Starwheel - Starwheel mount assembly - Includes cover, body, spring and two starwheels |
C4713-60098 |
Strip - Encoder strip assembly (D-size) - Includes encoder strip and encoder strip spring |
C2847-40015 |
Support - Cam gear support |
C3190-40026 |
Support - Control panel support - will come with control panel and support. |
C3180-60002 |
Switch - Bail switch assembly |
07550-40104 |
Wedge - Tensioning wedge (cam tensioner) - For the pen carriage drive belt pulley |
07570-40105 |
Wedge - Main tensioning wedge - For the carriage drive belt idler pulley |
C3180-60039 |
Window - Lift-up viewing window assembly |
C1633-40006 |
Wiper - Wiper pad |
C3180-60014 |
Wiper - Wiper assembly - Includes wiper rocker, wiper rod and wiper pad |