| C3196-60118 |
Bail - Bail assembly - Mounting strip assembly for the starwheel mount assemblies (Not included) - Extends width of plotter |
| C4706-60082 |
Belt - Carriage belt (E-size 36inch belt)- Long/wide belt attached to the carriage |
| C3195-40017 |
Bracket - Carriage motor bracket |
| C6429-00010 |
Brush - Brush, antistatic |
| C1633-40082 |
Bushing - Pincharm spring retaining bushing |
| C2858-40017 |
Bushing - Rear slider rod bushing (Spring loaded) - Slides into the rear center of the carriage assembly |
| 13242G |
Cable - RS-232C cable - 25-pin (M) to 25-pin (M) - 5.0m (16ft) long |
| 17255D |
Cable - RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long |
| 17302A |
Cable - RS-232C serial cable - 25-pin (M) to 8-pin (M) DIN - 1.5m (4.9ft) long |
| 31391A |
Cable - RS-232C serial extension cable - 25-pin (M) to 25-pin (F) - 5.0m (16.4ft) long |
| 5063-1256 |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| 5063-1257 |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| A6144-63008 |
Cable - RS-232C serial cable - 25-pin (M) to 9-pin (F) - 3.0m (9.8ft) long |
| C2913A |
Cable - RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long |
| C2951A |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| C2990A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long |
| C2991A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long |
| C3195-60102 |
Cable - Ribbon cable with ferrite - Has 5-pin (F) connectors - 16.5cm (6.5in) long |
| C3195-80009 |
Cable - Carriage assembly trailing cable 36 inch E size plotter -with 2 ribbon cables bundled together - for hewlett packard designJet plotter DSJ 700 , 750, 755CM SERIES. OEM New HP, limited. |
| C3196-60056 |
Cable - Power supply cable - Has 12-pin (F) connectors - 39.7cm (15.6in) long |
| C3196-60057 |
Cable - Ribbon cable assembly (Black) - Contains a 12 wire 1.1m (3.8ft) cable and a 14 wire 1.3m (4.2ft) cable - Connectors are a 28-pin (F) connector, three 6-pin (F) marked `SVS`, `Bail`, and `Primer`, a 4-pin (F), and a 4-pin (M) |
| C1633-20012 |
Cam - Pinch arm bar cam (E-size) - Long rod from left to right side of printer - Used to lift the pinch arms |
| C2858-40043 |
Cap - Spindle end cap - Small core spacer - Removes for loading the media roll. Please order spindle assembly. |
| C3172-40006 |
Cap - Spindle end cap - Small core spacer - Removes for loading the media roll. Please order spindle assembly. |
| C4708-69113 |
Carriage - Pen carriage assembly - Drafting `Head` for the plotter (holds tri-color and one black ink cartridges) - Front bushing is included and cannot be ordered separately |
| 51642M |
Cartridge - Cartridge for DesignJet-C1633A, DesignJet 600, DesignJet 650, DesignJet 200 E size |
| 51644C |
Cartridge - HP 44 Cyan InkJet Print Cartridge (USA) |
| 51644CA |
Cartridge - Cyan (Blue) ink cartridge (Asia/Pacific) |
| 51644CE |
Cartridge - Cyan (Blue) ink cartridge (Europe) |
| 51644CL |
Cartridge - Cyan (Blue) ink cartridge (Latin America) |
| 51644M |
Cartridge - HP 44 Magenta InkJet Print Cartridge (USA) |
| 51644MA |
Cartridge - Magenta (Red) ink cartridge (Asia/Pacific) |
| 51644ME |
Cartridge - Magenta (Red) ink cartridge (Europe) |
| 51644ML |
Cartridge - Magenta (Red) ink cartridge (Latin America) |
| 51644Y |
Cartridge - HP 44 Yellow InkJet Print Cartridge (USA) |
| 51644YA |
Cartridge - Yellow ink cartridge (Asia/Pacific) |
| 51644YE |
Cartridge - Yellow ink cartridge (Europe) |
| 51644YL |
Cartridge - Yellow ink cartridge (Latin America) |
| 51645A |
Cartridge - HP InkJet Crtg 45A Black Large NAM |
| 51645AA |
Cartridge - HP Inkjet Crtg 45A Black Large AP |
| 51645AC |
Cartridge - HP Inkjet Crtg 45A Black Large Can |
| 51645AE |
Cartridge - Black print cartridge (high capacity) - Prints approximately 840 pages based on 5% density on a 8-inch by 10-inch print area (Europe) |
| 51645AL |
Cartridge - Black print cartridge (high capacity) - Prints approximately 840 pages based on 5% density on a 8-inch by 10-inch print area (Latin America) |
| 51645G |
Cartridge - Black print cartridge (economy) - Prints approximately 415 pages based on 5% density on a 8 inch by 10 inch print area (USA) |
| 51645GA |
Cartridge - HP 45 Economy Black InkJet Print Cartridge - Prints approximately 415 pages based on 5% density on a 8-inch by 10-inch print area (Asia Pacific) |
| 51645GC |
Cartridge - Black print cartridge (economy) - Prints approximately 415 pages based on 5% density on a 8-inch by 10-inch print area (Canada) |
| 51645GL |
Cartridge - HP 45 Economy Black InkJet Print Cartridge - Prints approximately 415 pages based on 5% density on a 8-inch by 10-inch print area (Latin America) |
| C6613AN |
Cartridge - Black print cartridges (high capacity) - (two-pack of 51645A) each prints approximately 840 pages based on 5% density on a 8-inch (20.3cm) by 10-inch (25.4cm) print area (USA) |
| C3195-40026 |
Clamp - Ribbon cable clamp (top half) - Secures the trailing cable to the top of the carriage assembly |
| C3195-40027 |
Clamp - Ribbon cable clamp (bottom half) - Secures the trailing cable to the top of the carriage assembly |
| C6247A |
Cleaner - DesignJet cleaning kit - Includes cleaning solution and 20 cleaning rags |
| C4698A |
Color Kit - Color management kit - Includes pantone tables for Windows and Macintosh applications, Kodak precision profiles, Photoshop and IGC profiles in 4 disks, and color management user guide |
| C1633-00031 |
Cover - MIO slot access cover |
| C3195-00009 |
Cover - SIMM slot access cover - Metal cover that mounts to the back cover/panel on the electronic enclosure assembly |
| C3195-40047 |
Cover - Housing cover (L-shaped) - Right side cover (Cap) for the power switch housing (for enclosing the power switch) |
| C3196-60039 |
Cover - Cover assembly - Metal center cover that lift-up viewing window mounts to - Includes `T` shaped latches and mounting screws |
| C3196-60053 |
Cover - Back cover/panel - Metal cover for the electronic enclosure assembly |
| C4705-60106 |
Cover - Left end cover for HP DesignJet 750C Series |
| C4705-60114 |
Cover - Right end cover - Has cut outs for the control panel buttons lights and display - Does NOT include an overlay |
| C4706-60084 |
Cover - Rollfeed access cover - Opens forward to allow access to paper spindle assembly - Includes cover and springs |
| C4706-60088 |
Cover - Unicover assembly - Plastic cover which is used in place of the center cover, electrical cover assembly, SIMM cover, and SIMM barrier |
| C3193-60001 |
Cross Brace - Cross-brace - Brace that connects and supports the two stand legs |
| C2858-60021 |
Cutter - Cutter mechanism assembly - Auto cutter for rollfeed paper |
| C3195-40066 |
Deflector - Fan deflector - Deflects air from fan to prevent printing errors - Installed on metal structure of chassis below the carriage slider rods |
| C3196-60029 |
Enclosure - Cutter assembly enclosure bar - Mounts to left and right side side plates of chassis (Mounting bar for the media guides) |
| C2858-60010 |
Encoder - Linear encoder IC - Detects carriage position as it moves along encoder strip |
| C3195-40032 |
Encoder - Mrk encoder for HP BAIPLY1Z |
| Q5763-60001 |
Faceplate - Faceplate, Painted |
| C3190-60137 |
Fan - Tubeaxial fan for HP DesignJet 750C Series |
| 51642A |
Film - Polyester matte film - 61cm (24in) x 36.6m (120ft) roll |
| 51642B |
Film - Polyester matte film - 91.4cm (36in) x 36.6m (120ft) roll |
| 51642C |
Film - Polyester matte film - B size (11 x 17-inches) - 40 sheets |
| 51642G |
Film - Polyester Matte Film - D Size - 22 x 34 inches (40 Sheets) |
| 51642H |
Film - Film (Matte) for DesignJet-C1633A, DesignJet 600, DesignJet 650, DesignJet 200 D size |
| 51642J |
Film - Polyester matte film - Architectural D size (24 x 36-inches) - 40 sheets |
| 51642K |
Film - Polyester matte film - E size (34 x 44-inches) - 40 sheets |
| C1826A |
Film - High-gloss white film - Architectural E size (36 x 48-inches) - 100 sheets |
| C1827A |
Film - High-gloss white film - Architectural D size (24 x 36-inches) - 100 sheets |
| C1828A |
Film - Film (Glossy) for DesignJet 700 Series, DesignJet 455, DesignJet 450, DesignJet 750 |
| C1829A |
Film - Film (Glossy) for DesignJet 450, DesignJet 455, DesignJet 488, DesignJet 700 Series |
| C3875A |
Film - Clear film (4 mil) - 91.4cm (36in) x 22.9m (75ft) roll |
| C3876A |
Film - Clear film (4 mil) - 61cm (24in) x 22.9m (75ft) roll |
| C3885A |
Film - High gloss white film (4 mil) - 91.4cm (36in) x 30.5m (100ft) roll |
| C3886A |
Film - High gloss white film (4 mil) - 61cm (24in) x 30.5m (100ft) roll |
| C3195-60151 |
Firmware - Code ROM SIMM (Firmware) (Ver. A.02.10) - Plugs into socket on the main logic board |
| C4708-60117 |
Firmware - Code ROM SIMM (Revision M.01.12 firmware) - Plugs into socket on the main logic board |
| C6426-40015 |
Flag - Cleanout Flag - Senses if the Cleanout Assembly is Installed |
| C4696-60006 |
Foot - Foot assembly (includes casters) - Mounts to the bottom of the plotter stand legs (two used) |
| C3195-60038 |
Front Panel - Front (Control) panel and cable assembly for HP Designjet Plotter. Only control panel may not include overlay plastic face. |
| C1633-40019 |
Gear - Overdrive gear cluster |
| C6455-40057 |
Gear - Gear-cluster, stealth |
| C4705-60089 |
Gear Assembly - Clutch / overdrive gear assembly - Includes gear, clutch, retaining clip, and two washers |
| C3195-40045 |
Guide - Media guide (Small triangular shaped piece) |
| C3195-60149 |
Harness - AC wiring harness - Includes power switch, AC receptacle, and connector |
| C3195-40024 |
Holder - Cable holder (Small U-Shaped piece on top) - One of two pieces that hold the trailing cable to the main chassis |
| C3195-40025 |
Holder - Cable holder (Large piece on bottom) - One of two pieces that hold the trailing cable to the main chassis |
| C3180-40012 |
Housing - Switch housing (mount) - For protecting the power switch |
| C4704-60082 |
Housing - Housing assembly (on left side) |
| C4706-60092 |
Housing - Electronic housing assembly (PC board enclosure) |
| C6429-60008 |
Housing - Power supply w/housing |
| C3190-00016 |
Insulator - Insulator - Mounts between the power supply and main cover/panel of the electronic enclosure assembly |
| 5041-1203 |
Keycap - Power switch keycap (White) |
| C3198-60051 |
Kit - DesignJet 755CM (C3198B) manual kit - Includes user's guide, quick reference guide and front panel overlay (English) |
| C3198-60052 |
Kit - DesignJet 755CM (C3198B) manual kit - Includes user's guide, quick reference guide and front panel overlay (Korea) |
| C3198-60055 |
Kit - DesignJet 755CM (C3198B) manual kit - Includes user's guide, quick reference guide and front panel overlay (French) |
| C3198-60056 |
Kit - DesignJet 755CM (C3198B) manual kit - Includes user's guide, quick reference guide and front panel overlay (Spanish) DesignJet 755CM (C3198B) manual kit - Includes user's guide, quick reference guide and front panel overlay (Spanish) |
| C3198-60059 |
Kit - DesignJet 755CM (C3198B) manual kit - Includes user's guide, quick reference guide and front panel overlay (Portuguese) |
| C3198-60060 |
Kit - DesignJet 755CM (C3198B) manual kit - Includes user's guide, quick reference guide and front panel overlay (Chinese) |
| C3198-60084 |
Kit - DesignJet 755CM (C3198B) manual kit - Includes user's guide, quick reference guide and front panel overlay (German) |
| C3198-60087 |
Kit - DesignJet 755CM (C3198B) manual kit - Includes user's guide, quick reference guide and front panel overlay (Italian) |
| C4704-60095 |
Kit - Hardware kit for printer stand - Includes screwdriver, screws, washers, and media bin retaining clips |
| C3195-00057 |
Label - Safety label - Provides warning that encoder strip is sharp |
| C3195-40060 |
Latch - Center cover latch |
| C4696-60007 |
Leg - Leg assembly - Side support for the plotter - Does NOT include the foot assembly |
| C3195-60116 |
Lifter - Pincharm lift assembly - Does NOT include pincharm bar cam - Includes pinchwheel manual lift handle, spring, sensor, rocker plate, cam drive, cam journals, wire linkages, nuts, screws, and washer |
| 6040-0855 |
Lubricant - SYNTHETIC OIL (Aoz Plastic Bottle) Front and Rear Slider Rods. |
| C3195-69166 |
Maintenance Kit - Maintenance kit - Includes service station (spittoon) assembly, carriage (Y-Axis) motor, encoder strip, and lubricating oil |
| 5959-9733 |
Manual - Manual for Designjet 820 MFP Series, DesignJet-C1633A, DesignJet 600, DesignJet 650 |
| C4705-90000 |
Manual - DesignJet 700, 750C, 750C plus and 755CM service manual (2nd edition, August 1996) - Note: Coverage limited to C3195A, C3196A, C3198A, C3198B, C4705A, C4706A, C4708A, and C4709A. Pick on C3196A-Manual |
| C6072-60281 |
Manual - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (English) |
| C6072-60301 |
Manual - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (English) |
| C7779-60041 |
Manual - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (English) |
| C4706-60097 |
Media Bin - Media bin - Wire rack that mounts to the plotter stand legs and cross brace |
| C3146-67901 |
Memory - 16MB SIMM memory module |
| D2297-69001 |
Memory - 16MB, 70nS, 36-bit SIMM memory module |
| D2297A |
Memory - 16MB, 70nS, 36-bit parity SIMM memory module |
| D3578-69001 |
Memory - 32MB, 70nS, 36-bit parity SIMM memory module |
| D3578A |
Memory - 32MB, 70nS, 36-bit parity SIMM memory module |
| J2382-69003 |
Module - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors |
| J2590-69001 |
Module - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors |
| J2592-69001 |
Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
| J4102-61021 |
Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
| J4102-69022 |
Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
| C3195-60009 |
Motor - Bail stepper motor - Used to drive the bail assembly |
| C3195-60112 |
Motor - Carriage drive motor assembly - Includes motor and cable |
| C4705-60068 |
Motor - Paper (X-axis) drive motor (includes helical drive gear - NOTE: motor and gear are only sold as a set |
| C3198-00020 |
NamePlate - Nameplate - DesignJet 755CM printer logo |
| C6428-40005 |
NamePlate - DJ 952C Nameplate |
| C4706-60121 |
Overdrive Assembly - Overdrive support assembly (E) |
| C3195-60041 |
Overlay - Front panel overlay (Self adhesive) - Shows the function of the front panel buttons and indicator lights (English) |
| C3195-60042 |
Overlay - Front panel overlay (Self adhesive) - Shows the function of the front panel buttons and indicator lights (Korean) |
| C3195-60043 |
Overlay - Front panel overlay (self adhesive) - Shows the function of the front panel buttons and indicator lights (Taiwan) |
| C3195-60044 |
Overlay - Front panel overlay (Self adhesive) - Shows the function of the front panel buttons and indicator lights (German) |
| C3195-60045 |
Overlay - Front panel overlay (Self adhesive) - Shows the function of the front panel buttons and indicator lights (French) |
| C3195-60046 |
Overlay - Front panel overlay (Self adhesive) - Shows the function of the front panel buttons and indicator lights (Spanish) |
| C3195-60047 |
Overlay - Front panel overlay (Self adhesive) - Shows the function of the front panel buttons and indicator lights (Italian) |
| C3195-60048 |
Overlay - Front panel overlay (self adhesive) - Shows the function of the front panel buttons and indicator lights (Japanese) |
| C3195-60049 |
Overlay - Front panel overlay (Self adhesive) - Shows the function of the front panel buttons and indicator lights (Portuguese) |
| C3195-60050 |
Overlay - Front panel overlay (Self adhesive) - Shows the function of the front panel buttons and indicator lights (Chinese) |
| C3196-60113 |
Packaging - Repackaging Kit - for Main Plotter Unit |
| C1830A |
Paper - Coated paper - E size (34 x 44-inches) - 100 sheets |
| C1831A |
Paper - Coated paper - D size (22 x 34-inches) - 100 sheets |
| C1832A |
Paper - Coated paper - Architectural E size (36 x 48-inches) - 100 sheets |
| C1833A |
Paper - Coated paper - Architectural D size (24 x 36-inches) - 100 sheets |
| C1834A |
Paper - Paper (Coated) for DesignJet 750, DesignJet 755, DesignJet 700 Series, DesignJet 430 |
| C1835A |
Paper - Paper (Coated) for DesignJet 750, DesignJet 755, DesignJet 700 Series, DesignJet 430 |
| C1860A |
Paper - HP Bright white InkJet paper - 61cm (24in) x 45.7m (150ft) roll |
| C1861A |
Paper - HP Bright white InkJet paper - 91.4cm (36in) x 45.7m (150ft) roll |
| C3850A |
Paper - Opaque bond paper - 91.4cm (36in) x 45.7m (150ft) roll |
| C3851A |
Paper - Opaque bond paper - 61cm (24in) x 45.7m (150ft) roll |
| C3852A |
Paper - Opaque bond paper - E size (34 x 44-inches) - 100 sheets |
| C3853A |
Paper - Opaque bond paper - D size (22 x 34-inches) - 100 sheets |
| C3854A |
Paper - Opaque bond paper - Architectural E size (36 x 48-inches) - 100 sheets |
| C3855A |
Paper - Bright White Inkjet Paper - 61cm (24in) x 45.7m (150ft) roll |
| C3856A |
Paper - Opaque bond paper - A0 size (84.1cm x 118.9cm) - 125 sheets |
| C3857A |
Paper - Opaque bond paper - A1 size (59.4cm x 84.1cm) - 125 sheets |
| C3859A |
Paper - Paper - transparencies, continuous forms - Roll A0 91.4 cm x 45.7 m) - 67 g/m2 - 1 pcs. |
| C3860A |
Paper - Translucent bond paper - 61cm (24in) x 45.7m (150ft) roll |
| C3868A |
Paper - Natural tracing paper - 91.4cm (36in) x 45.7m (150ft) roll |
| C3869A |
Paper - Natural tracing paper - 61cm (24in) x 45.7m (150ft) roll |
| C3872A |
Paper - Natural tracing paper - A0 size (84.1cm x 118.9cm) -125 sheets |
| C3873A |
Paper - Natural tracing paper - A1 size (59.4cm x 84.1cm) - 125 sheets |
| C3879A |
Paper - Heavyweight coated paper (6 mil) - 91.4cm (36in) x 30.5m (100ft) roll |
| C3880A |
Paper - Heavyweight coated paper (6 mil) - 61cm (24in) x 30.5m (100ft) roll |
| C3881A |
Paper - High gloss photo paper - 91.4cm (36in) x 30.5m (100ft) roll |
| C3882A |
Paper - High gloss photo paper - 61cm (24in) x 30.5m (100ft) roll |
| C3883A |
Paper - Semi-gloss photo paper - 91.4cm (36in) x 30.5m (100ft) roll |
| C3884A |
Paper - Semi-gloss photo paper - 61cm (24in) x 30.5m (100ft) roll |
| C3890A |
Paper - Translucent bond paper - E size (34 x 44-inches) - 100 sheets |
| C3891A |
Paper - Translucent bond paper - D size (22 x 34-inches) - 100 sheets |
| C3892A |
Paper - Paper for DesignJet 430, DesignJet 700 Series, DesignJet 450, DesignJet 455 |
| C3893A |
Paper - Paper for DesignJet 700 Series, DesignJet 430, DesignJet 755, DesignJet 750 |
| C3894A |
Paper - Translucent bond paper - Architectural E size (36 x 48-inches) - 100 sheets |
| C3896A |
Paper - Translucent bond paper - Architectural D size (24 x 36-inches) - 100 sheets |
| C6019B |
Paper - Coated paper (98 gsm) - 61cm (24in) x 45.7m (150ft) roll (USA, Canada, and Latin America) |
| C6020B |
Paper - Coated paper (98 gsm) - 91.4cm (36in) x 45.7m (150ft) roll (USA, Canada, and Latin America) |
| C6021B |
Paper - Heavyweight coated paper - 61cm (24in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
| C6022B |
Paper - Heavyweight coated paper - 91.4cm (36in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
| C6029C |
Paper - Heavyweight coated paper - 61cm (24in) x 30.5m (100ft) roll - For regular or UV resistant ink |
| C6030C |
Paper - Heavyweight coated paper - 91.4cm (36in) x 30.5m (100ft) roll - For regular or UV resistant ink |
| C6810A |
Paper - Bright white InkJet paper - 91.4cm (36in) x 91.4m (300ft) roll |
| C7923A |
Paper - Basic heavyweight paper - 61cm (24in) x 30.5m (100ft) roll (USA and Asia/Pacific) |
| C7924A |
Paper - Basic Heavyweight Paper - 91.4cm (36in) x 30.5m (100ft) roll (USA and Asia/Pacific) |
| C8281A |
Paper - Basic coated paper - 61cm (24in) x 45.7m (150ft) roll (USA and Asia/Pacific) |
| C8282A |
Paper - Basic coated paper - 91.4cm (36in) x 45.7m (150ft) roll (USA and Asia/Pacific) |
| C8310A |
Paper - Basic photo satin paper - 61cm (24in) x 30.5m (100ft) roll (USA and Asia/Pacific) |
| C8311A |
Paper - Basic photo satin paper - 91.4cm (36in) x 30.5m (100ft) roll (USA and Asia/Pacific) |
| C8315A |
Paper - High gloss photo paper - 61cm (24in) x 30.5m (100ft) roll (USA and Asia/Pacific) |
| C8316A |
Paper - High gloss photo paper - 91.4cm (36in) x 30.5m (100ft) roll (USA and Asia/Pacific) |
| C4708-69001 |
PC Board - Main Logic board - Includes integrated RS232-C (Serial) and bi-tronics/centronics (Parallel) interface ports |
| J2550-69013 |
PC Board - EtherTwist 10Base-T LAN interface board |
| J2555-69013 |
PC Board - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors |
| J4100-69001 |
PC Board - JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors |
| J2550B |
PC Board Interface - EtherTwist (10Base-T) LAN interface board, JetDirect card has one 10 Mbps RJ45 Ethernet connector. |
| J2552B |
PC Board Interface - LAN and LocalTalk interface - Has EtherTwist (10Base-T) , ThinLAN (10Base-2) , and LocalTalk (DIN-8) connectors |
| J2555B |
PC Board Interface - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors |
| J2590A |
PC Board Interface - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors |
| J2591-69001 |
PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors |
| J2591A |
PC Board Interface - External JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors |
| J2594-69001 |
PC Board Interface - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors |
| J3258-61041 |
PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN |
| J3258B |
PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN |
| J3264A |
PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN |
| J3265-69001 |
PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors |
| J3265G |
PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
| J4101B |
PC Board Interface - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network |
| J4102B |
PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
| C4705-60091 |
Pinch Assembly - Pincharm assembly - Curved black plastic plate with four small rollers - Does NOT include spring or bushing |
| C6429-60016 |
Plate - Shift Plate Assembly - Five Plastic Gears Held in a Two |
| C3196-60173 |
Platen - Entry Platen Assembly - Cover/guide that is next to the paper drive (Platen) roller |
| C3195-60014 |
PostScript - HP Designjet 750C 755CM Postscript SIMM |
| C3198-60151 |
PostScript - PostScript SIMM |
| C3198-69151 |
PostScript - Post Script SiMM |
| 8120-1351 |
Power Cord - Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei) |
| 8120-1369 |
Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China) |
| 8120-1378 |
Power Cord - Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam) |
| 8120-1689 |
Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam) |
| 8120-2104 |
Power Cord - Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Switzerland) |
| 8120-2956 |
Power Cord - Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Denmark) |
| 8120-4211 |
Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in South Africa and India) |
| 8120-4753 |
Power Cord - Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 100V in Japan) |
| 8120-6302 |
Power Cord - Daisy chain power cord (Dove Gray) - 18 AWG, 1.2m (4.0ft) long - Has C14 (M) plug for power input and C13 (F) plug for power output |
| 8121-0877 |
Power Cord - Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in the USA and Canada) |
| 0957-2340 |
Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories. |
| 0957-2481 |
Power Module - Pwra brk uni 12vdc 15w |
| 5188-5676 |
Power Module - Power module (wall mount) - Input voltage 100VAC, 47/63Hz - Output voltage 13VDC, 800mA, 10.4 watts (for use in Japan) |
| 0950-2623 |
Power Supply - Switching power supply (Delta DPS-158ABA) - 100-240VAC input, 47-63Hz - Four DC outputs (5.15V, +12V, -12V, 24V) - 158 watts - Includes upgrade sticker |
| C6426-60003 |
Power Supply - Power Supply PC Board |
| C4705-60109 |
Primer - Primer assembly - Mounts under the service station assembly on the left side of the plotter |
| C3195-60169 |
Pulley - Idler pulley - Applies tension to the left end of the carriage belt |
| 5183-5268 |
Recovery Kit - Recovery Kit for DeskJet 1200 Series, DeskJet 850 Series, DeskJet 1000 Series, DeskJet 1100 Series |
| 5184-2833 |
Recovery Kit - Return kit - For returning defective Thermal InkJet (TIJ) 2.5 cartridges - Includes box and instructions |
| C3198B-Repair_DesignJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| C4700-60042 |
Roller - Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder |
| C4704-60199 |
Rollfeed Assembly - Brake/housing assembly (on right side) - Accepts the flange end of the spindle rod assembly - Includes the 2 housing pieces, 2 brake shoes, brake gear, brake lever, and springs |
| Q5763-60002 |
Scanner - Scanner - CIS, CMOS, PIC |
| 0515-2961 |
Screw - Screw-Metal Tapping |
| 0515-4576 |
Screw - Screw-mach m3 x 0.5 6.9mm-lg pan-hd |
| 0591-0090 |
Screw - Plastite screw (threaded insert mold-in, Textron K40) - M4.0 x 0.7, 20mm long, Torx T15 |
| C2858-60007 |
Sensor - Optical primer sensor |
| C3190-60140 |
Sensor - Media sensor mechanical assembly |
| C3195-60015 |
Sensor - Sensor assembly |
| C3198B-Manual_DesignJet |
Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. |
| C7769-90066 |
Service Manual - DesignJet support DVD-ROM - Version A.04.01 - Has product information, user's manuals, service manuals, diagnostic software, test drawings, newsletters, and service notes |
| 0624-0795 |
Service Parts - Screw Filter |
| C3196-00031 |
Service Parts - Shipping Material/Carton for DesignJet 755, DesignJet 750, DesignJet 700 Series |
| C6426-40124 |
Service Parts - Slider, length adjust, bus. tr |
| C7886A |
Service Parts - LF Proofing Gloss |
| Q1254-60025 |
Service Parts - English/korean for HP 32054F |
| Q1660-60008 |
Service Parts - Lid-paint-alloy |
| C3195-69165 |
Service Station - Service station assembly - For conditioning the ink cartridges when the carriage is in its home position |
| C3195-80005 |
Shield - RFI shield (Gasket) - Braided shield with adhesive strip attached to electronic housing |
| C4704-40050 |
Shield - SIMM module shield |
| C6071-60368 |
Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Japanese) |
| C6072-60284 |
Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (German) |
| C6072-60285 |
Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (French) |
| C6072-60286 |
Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (Spanish) |
| C6072-60287 |
Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (Italian) |
| C6072-60304 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (German) |
| C6072-60305 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (French) |
| C6072-60306 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Spanish) |
| C6072-60307 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Italian) |
| C7779-60040 |
Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Chinese) |
| C7779-60042 |
Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Korean) |
| C7779-60043 |
Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Taiwanese) |
| C7779-60044 |
Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (German) |
| C7779-60045 |
Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (French) |
| C7779-60046 |
Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Spanish) |
| C7779-60047 |
Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Italian) |
| C2848-60011 |
Spindle - Rollfeed spindle rod assembly (E-size 36 inch ) - Includes spindle and end caps |
| C3173-60003 |
Spindle - Rollfeed spindle rod assembly (E-size) - Includes spindle and end caps - Special unit for use in China |
| C3173A |
Spindle - E/A0 rollfeed spindle rod assembly for DesignJet 6xx/7xx - Includes spindle and end caps |
| C3195-60027 |
Spitton - Spittoon assembly - Contains absorbers which hold excess ink from cartridges |
| C1633-80005 |
Spring - Compression spring - Installed between pincharm assembly and bushing |
| C1633-80014 |
Spring - Compression spring - For the rear bushing on the carriage |
| C3195-80002 |
Spring - Compression spring - For the pulley wedge - Applies tension to the carriage belt |
| C4699-00016 |
Spring - Encoder spring for HP DesignJet 510ps |
| C6487-00032 |
Spring - Spring-pinch for HP DeskJet 6940 Series |
| C4713-60035 |
Starwheel - Starwheel mount assembly - Includes cover, body, spring and two starwheels |
| C4714-60098 |
Strip - Encoder strip assembly (E-size) - Includes encoder strip and encoder strip spring |
| C3195-94001 |
Training - Additional self paced training test - Contains 1 test for DesignJet 750C, 755CM |
| C3861A |
Vellum - Vellum - 91.4cm (36in) x 45.7m (150ft) roll |
| C3862A |
Vellum - HP Vellum Paper is ideal for reproducible final drawings. Offers crisp, archivable line drawings and sharp text and uniform solid areas. 75-g/m² (20-lb) weight provides excellent handling and durability. The HP Designjet printing solution—printer. |
| C3863A |
Vellum - Vellum (75 gsm) - E size (34 x 44-inches) 20 lb, 3.0 mil - 100 sheets |
| C3864A |
Vellum - Vellum (75 gsm) - D size (22 x 34-inches), 20 lb, 3.0 mil - 100 sheets |
| C3865A |
Vellum - Vellum (75 gsm) - Architectural E size (36 x 48-inches), 20 lb, 3.0 mil - 100 sheets |
| C3866A |
Vellum - Vellum (75 gsm) - Architectural D size (24 x 36-inches), 20 lb, 3.0 mil - 100 sheets |
| C3195-40039 |
Wedge - Pulley wedge tensioner - For carriage (Y-axis) belt tension |
| C4706-60087 |
Window - Lift-up viewing window |
| C6429-00001 |
Wing - Spg- wing- lt for HP DeskJet 6620 Series |
View service parts