| RB1-8756-000CN |
Actuator - Toner cartridge drive rod |
| RB1-8851-000CN |
Actuator - Power switch actuator rod |
| C2809A |
Adapter - Serial cable adapter - 9-pin (M) to 25-pin (F) |
| C4125A |
Adapter - HP LaserJet 4000/4000N Series universal paper tray - Letter to A5 size paper - This is the 500 sheet removeable tray ONLY - NOT the feeder assembly |
| RB1-8700-000CN |
Arm - Laser shutter arm |
| RB1-8787-000CN |
Arm - Tray 1 paper sensor actuator arm |
| RB1-8879-000CN |
Arm - Paper tray sensing arm |
| RB2-2387-000CN |
Arm - Tray 1 retaining arm |
| RF5-3116-000CN |
Arm - Tray 1 paper sensor actuator arm and cover |
| RG5-2650-000CN |
Arm - Delivery sensor arm assembly |
| C7833-40014 |
Base - Reversible base assembly - Used in the lower position when one 500-sheet tray is installed on the LaserJet, or the upper position when two 250-sheet trays are installed - The print-to-mail accessory sits on this base |
| RS5-1179-000CN |
Bearing - Transport roller bearing |
| RB1-8668-000CN |
Belt - Feed Guide Drive Belt |
| RB1-8668-030CN |
Belt - Feed guide drive belt - Small belt approximately 5/16 inch wide with 'A' shaped ribs on it |
| RB1-8946-000CN |
Bushing - Separation roller bushing |
| RB1-8688-000CN |
Button - Engine test button - Manual test button |
| RB1-8849-000CN |
Button - Power Switch Button |
| RB1-8849-030CN |
Button - Power switch button |
| 5063-1256 |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| 5063-1257 |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| 92215N |
Cable - Interface cable kit - For HP peripherals designed for use in an AppleTalk/Phonenet network - Not for Macintosh models that have recessed I/O connectors |
| 92215S |
Cable - RS-422 serial cable - 8-pin (M) to 8-pin (M) - 2.0m (6.6ft) long |
| C2932A |
Cable - RS-232C serial cable - 9-pin (M) to 9-pin (F) - 3.0m (9.8ft) long |
| C2933A |
Cable - RS-232C serial cable - 9-pin (M) to 25-pin (F) - 3.0m (9.8ft) long |
| C2950A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| C2951A |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| C2990A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long |
| C2991A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long |
| RG5-3700-000CN |
Cable - Cable assembly - 3-pin (F) connectors on each end - 10.0cm (3.9in) long |
| RG5-3703-000CN |
Cable - Cable assembly - Large 6-pin (F) connector to both a 6.5cm (2.6in) grounding cable with a ring terminal and a 39.4cm (15.5in) cable with a small 6-pin (F) connector |
| RG5-3704-000CN |
Cable - Envelope feeder connector and cable |
| RG5-3705-000CN |
Cable - Cable assembly - A 6-pin (F) connector to both a 21.3cm (8.4in) cable with a 3-pin (F) connector and a 27.2cm (10.7in) cable with a 3-pin (F) connector |
| RG5-3706-000CN |
Cable - Feed/registration sensor assembly cable |
| RG5-3708-000CN |
Cable - Cable assembly - A 38-pin (F) connector to a 14cm (5.5in) ribbon cable with a 26-pin (F) connector, a 20cm (7.9in) ribbon cable with a 10-pin (F) connector, and a 34.6cm (13.6in) 2 wire cable with a 2-pin (F) connector |
| RG5-3709-000CN |
Cable - Main motor cable |
| RG5-3710-000CN |
Cable - Paper feeder module cable |
| RG5-3711-000CN |
Cable - Optical sensor cable |
| RG5-3822-000CN |
Cable - Paper feeder cable |
| RG5-3876-000CN |
Cable - Cable assembly with ferrite - A 13-pin (F) connector, a 6-pin (F) connector, a 4-pin (F) connector, and three 3-pin (F) connectors - 38.4cm (15.1in) long |
| 140127A |
Cartridge - 27a yield black toner |
| 140127X |
Cartridge - 27x hi yield black toner |
| 5184-5218 |
Cartridge - Black toner (EP) cartridge - With `Micro-Fine` toner - Has standard capacity toner (Prints approximately 6, 000 pages) |
| 6R926 |
Cartridge - 27x hi yield black toner |
| C4127A |
Cartridge - Black toner (EP) cartridge - With 'Micro-Fine' toner - Has standard capacity toner (Prints approximately 6, 000 pages) |
| C4127D |
Cartridge - 2-27x hi yield black toner |
| C4127X |
Cartridge - Black toner (EP) cartridge - With 'Micro-Fine' toner - Has maximum capacity toner (Prints approximately 10,000 pages) |
| 5090-3379 |
Cleaner - Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills |
| RB1-8848-000CN |
Clip - Left side panel retainer clip |
| RB1-8860-000CN |
Clip - Right side panel retainer clip |
| XD2-1100-502CN |
Clip - E-ring clip for HP Color LaserJet 1500 Series |
| RB1-8974-000CN |
Clutch - Separation roller clutch - Torque limiter |
| RG5-3712-000CN |
Connector - Lower tray connector and cable |
| VS1-6174-006CN |
Connector - Feed drive assembly connector |
| VS1-6176-006CN |
Connector - 250/500 sheet feeder connector |
| RG5-2666-000CN |
Control Panel - Control Panel - Does Not Include Overlay |
| RG5-5372-050CN |
Control Panel - Control panel - Does not include overlay |
| C4119-67902 |
Coupler - Coupler kit - Contains pickup roller coupler, four paper tray load limit clips and installation instruction sheet |
| RB1-8945-000CN |
Coupler - Separation roller/gear coupler |
| 5021-0349 |
Cover - EIO slot cover - Installs on formatter boards without JetDirect PCA |
| 5851-2583 |
Cover - EIO slot cover - Installs on formatter boards without JetDirect PCA |
| C4232-60101 |
Cover - Dust cover - For use with models featuring a standard 1X500 paper tray |
| C4232A |
Cover - Dust Cover - Used on Models With Standard 1X500 Paper Tray |
| C4233-60101 |
Cover - Dust cover - For use with models featuring standard 2X250 paper trays |
| C4233A |
Cover - Dust Cover - Used on Models With Standard 2X250 Paper Trays |
| C4234-60101 |
Cover - Dust cover - For use with optional 500-sheet feeder on LJ4000/4050/4100 models using 1X500 or 2X250 paper trays |
| C4234A |
Cover - Dust cover - For use with optional 500-sheet feeder on LJ4000/4050/4100 models using 1X500 or 2X250 paper trays |
| RB1-8706-000CN |
Cover - Main cooling fan cover |
| RB1-8710-000CN |
Cover - Plate cover for HP LaserJet 4000 Series |
| RB1-8788-000CN |
Cover - Tray 1 sensor arm cover - Tray 1 paper sensor actuator arm and cover |
| RB1-8805-000CN |
Cover - Rear fuser cover panel |
| RB1-8858-000CN |
Cover - Formatter board cover panel |
| RB1-8886-000CN |
Cover - Feeder PC board cover |
| RB1-9044-000CN |
Cover - Top cover - Duplexer access top cover |
| RB1-9045-000CN |
Cover - Duplexer rear cover panel |
| RB1-9047-000CN |
Cover - Right side duplexer cover |
| RB2-2386-000CN |
Cover - Envelope feeder drive cover |
| RF5-1876-000CN |
Cover - Left side duplexer cover - With connector |
| RG5-2663-040CN |
Cover - Top Cover Assembly - Does Not Include Control Panel |
| RG5-2663-090CN |
Cover - Plate cover for HP LaserJet 4100 Series |
| RG5-2664-070CN |
Cover - Right front cover assembly - Mounts bedie the formatter panel |
| RG5-2665-000CN |
Cover - Left side cover assembly - Includes panel retainer clip |
| RG5-2668-120CN |
Cover - Right side feeder cover |
| RG5-2669-050CN |
Cover - Feeder cover left side - Tray 2 |
| C4118-67907 |
Door - Tray 1 door assembly kit - New style pull-out tray with extension and new spring - Includes instructions |
| C2985-69031 |
Drive Assembly - 3.5GB EIO hard drive - LaserJet EIO font/print job storage |
| RG5-2653-020CN |
Drive Assembly - Print drive gear assembly |
| RG5-2690-000CN |
Drive Assembly - Optional 500 sheet paper pickup drive assembly |
| RG5-3721-000CN |
Drive Assembly - Delivery drive assembly |
| C4123-69001 |
Duplexer - Duplexer assembly- Duplexer Duplex Assembly Unit for LaserJet 4000 & 4050 |
| C4123A |
Duplexer - Duplexer assembly - For two sided printing - Duplexer Duplex Assembly Unit for LaserJet 4000 & 4050 |
| C4122-69001 |
ENVY - Envelope feeder assembly Power envelope feeder - Holds 75 monarch, C5, DL, B5, or COM10 envelopes |
| RH7-1334-000CN |
Fan - Main cooling fan for LaserJet 4000/4050 series. |
| RH7-1335-000CN |
Fan - Main cooling fan for LaserJet 4000/4050 series |
| RH7-1361-000CN |
Fan - Tubeaxial fan - 24VDC |
| C4122A |
Feeder - Power envelope feeder - Holds 75 monarch, C5, DL, B5, or COM10 envelopes |
| C8053-69002 |
Feeder - Power envelope feeder - Holds 75 monarch, C5, DL, B5, or COM10 envelopes |
| RG5-2651-090CN |
Feeder - Paper feed assembly |
| RB1-8107-000CN |
Foot - Rubber foot - Replacement rubber foot for the bottom of the printer (four used) |
| RG5-2687-000CN |
Frame - Right side frame assembly |
| RG5-2688-000CN |
Frame - Left side frame assembly |
| C4118-69011 |
Fuser Assembly - Fuser Assembly - 110 volts Fuser Assembly - Bonds the toner to the paper with heat - For 110V to 127VAC operation |
| C4118-69012 |
Fuser Assembly - Fusing assembly - For 220 VAC operation - Bonds toner to paper by heat;Click to order the functional equivalent: C4118-69002 |
| RG5-2661-000CN |
Fuser Assembly - Fuser Assembly - 110 volts Fuser Assembly - Bonds the toner to the paper with heat - For 110V to 127VAC operation |
| RG5-2661-490CN |
Fuser Assembly - Fuser Assembly - 110 volts Fuser Assembly - Bonds the toner to the paper with heat - For 110V to 127VAC operation |
| RG5-2662-500CN |
Fuser Assembly - Fusing assembly - For 220 VAC operation - Bonds toner to paper by heat |
| RG5-4291-100CN |
Fuser Assembly - Fusing Assembly - For 220 VAC - Bonds toner to paper with heat |
| RB1-8948-000CN |
Gear - Separation roller drive gear |
| RS5-0911-000CN |
Gear - Coupler gear for HP LaserJet 4000 Series |
| RB1-8694-000CN |
Ground - Interlock switch support ground strap |
| RB1-8708-000CN |
Ground - Gear plate ground strap |
| RB1-8747-000CN |
Ground - Registration assembly grounding plate |
| C4251-67906 |
Guide - Paper guide kit - Includes paper guide and guide support for 500 sheet feeder |
| RB1-8704-030CN |
Guide - Bottom cable guide |
| RB1-8757-000CN |
Guide - Gear assembly plate cable guide |
| RB1-8862-000CN |
Guide - Formatter/control panel cable guide |
| RB1-8873-000CN |
Guide - Paper Guide Support - this is the bigger piece showing on the diagram. (guide only part number is RB1-8890-000CN). |
| RB1-8890-000CN |
Guide - Paper guide - Includes paper guide for 500 sheet feeder. (For bigger item please order RB1-8873-000CN). |
| RB1-8924-000CN |
Guide - Optional lower cassette support guide |
| RG5-2643-020CN |
Guide - Paper feed guide assembly |
| RG5-2643-160CN |
Guide - Paper feed guide assembly |
| C2985-60008 |
Hard Drive - 3.5GB EIO hard drive - LaserJet EIO font/print job storage |
| C2985-61021 |
Hard Drive - 20GB EIO hard drive - LaserJet EIO font/print job storage |
| C2985-61031 |
Hard Drive - 3.5GB EIO hard drive - LaserJet EIO font/print job storage |
| RB1-8703-000CN |
Hardware - Module attachment screw - Long screw with shoulder at bottom |
| XA9-0917-000CN |
Hardware - Feed module screw - M3 x 16mm |
| RB1-8689-000CN |
Holder - Cable holder for HP LaserJet 4000 Series |
| RB1-8690-000CN |
Holder - Toner cartridge sensing spring retainer |
| RB1-2190-000CN |
Hook - Pickup roller spring hook |
| RB1-9009-000CN |
Indicator - Level indicator - Small oval button on front left side of tray - Moves vertically to show amount of paper in tray |
| RB1-8838-000CN |
Insulator - Sheet insulator - Plastic sheet between PCA and metal plate |
| C4118-61101 |
Kit - Self-paced training kit for LaserJet 4000 - Includes NTSC video, service manual bundle, user manual bundle, and five additional student guides |
| C4118-67905 |
Kit - Self paced training kit for laser Jet 4000 family - Includes NTSC format video (VHS) and five student guides |
| C4118-99051 |
Kit - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (English) |
| C4118-99052 |
Kit - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (French) |
| C4118-99053 |
Kit - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (Italian) |
| C4118-99054 |
Kit - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (German) |
| C4118-99055 |
Kit - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (Spanish) |
| C4118-99056 |
Kit - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (Dutch) |
| C4118-99057 |
Kit - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (Danish) |
| C4118-99058 |
Kit - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (Finnish) |
| C4118-99059 |
Kit - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (Norwegian) |
| C4118-99060 |
Kit - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (Swedish) |
| C4118-99061 |
Kit - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (Portuguese) |
| C4118-99062 |
Kit - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (Polish) |
| C4118-99063 |
Kit - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (Turkish) |
| C4118-99064 |
Kit - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (Traditional Chinese) |
| C4118-99065 |
Kit - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (Korean - Hangul) |
| C4118-99066 |
Kit - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (Russian - Cyrillic) |
| C4118-99067 |
Kit - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (Hungarian) |
| C4118-99068 |
Kit - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (Czechoslovakian) |
| C4118-99069 |
Kit - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (Simplified Chinese) |
| C4118-99070 |
Kit - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (Thai) |
| C4118-99071 |
Kit - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (Arabic) |
| C4118-99072 |
Kit - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (Greek) |
| C4118-99073 |
Kit - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (Hebrew) |
| C4118-99074 |
Kit - LaserJet 4000/4050 series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (Japanese) |
| C4118-69005 |
Laser Scanner - Laser/scanner assembly |
| RG5-2641-000CN |
Laser Scanner - Laser/scanner assembly |
| RB1-8846-000CN |
Latch - Rear output tray - Drop down release latch |
| RB1-8887-000CN |
Lever - Tray size sensing lever assembly |
| RB1-8961-000CN |
Lifter - Arm lifter - White plastic arm that holds top left side metal corner piece up when loading paper in tray |
| RB1-8962-000CN |
Lifter - Arm lifter - White plastic arm that holds top right side metal corner piece up when loading paper in tray |
| C4118-67903 |
Maintenance Kit - Maintenance kit - For 220 VAC operation - Includes 220 VAC fusing assembly, transfer roller, six pick-up/separation rollers, multi-purpose/tray 1 pick-up roller, vinyl gloves, and instruction guide |
| C4118-67909 |
Maintenance Kit - LaserJet 4000 series Maintenance kit (120V) - Includes (new) 120VAC Fuser Assembly, transfer roller, six pickup/separation rollers, MP Tray/Tray 1 pickup roller, vinyl gloves, and instruction guide |
| C4118-67910 |
Maintenance Kit - Maintenance kit - For 220 VAC operation - Includes 220 VAC fusing assembly, transfer roller, six pick-up/separation rollers, multi-purpose/tray 1 pick-up roller, vinyl gloves, and instruction guide |
| C4118-69001 |
Maintenance Kit - Maintenance kit (120V) - Includes exchange 120VAC fusing assembly, transfer roller, six pickup/separation rollers, MP Tray/Tray 1 pickup roller, vinyl gloves, and instruction guide |
| C4118-69002 |
Maintenance Kit - Maintenance kit - For 220 VAC operation - Includes 220 VAC fusing assembly, transfer roller, six pick-up/separation rollers, multi-purpose/tray 1 pick-up roller, vinyl gloves, and instruction guide |
| C7851A |
Maintenance Kit - Maintenance kit (120V) - Includes (new) 120VAC fusing assembly, transfer roller, six pickup/separation rollers, MP Tray/Tray 1 pickup roller, vinyl gloves, and instruction guide |
| C7852A |
Maintenance Kit - Maintenance kit (220V) - Includes (new) 220VAC fusing assembly, transfer roller, six pickup/separation rollers, MP Tray/Tray 1 pickup roller, vinyl gloves, and instruction guide |
| C4118-91026 |
Manual - LaserJet 4000 series service manual |
| C4118-91028 |
Manual - Additional self-paced training guides (English) - Pack of 5 |
| C6072-60301 |
Manual - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (English) |
| C4135A |
Memory - 4MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module |
| C4136A |
Memory - 8MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module |
| C4137A |
Memory - 16MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module |
| C4140A |
Memory - 4MB, 100-pin SDRAM DIMM memory module |
| C4286A |
Memory - 2MB flash DIMM memory - Font storage device |
| C4287A |
Memory - 4MB flash DIMM memory - Font storage device |
| C4292A |
Memory - 8MB Traditional Chinese MROM DIMM - For LaserJet printers |
| C4293A |
Memory - 8MB simplified Chinese MROM DIMM - For LaserJet printers |
| C7842A |
Memory - 4MB, 100-pin SDRAM DIMM memory module |
| C7842AX |
Memory - 8MB, 100MHz SDRAM DIMM memory module |
| C7843A |
Memory - 16MB, 100-pin SDRAM DIMM memory module |
| C7845A |
Memory - 32MB, 100-pin SDRAM DIMM memory module |
| Q7707AX |
Memory - 32MB, 100-pin SDRAM DIMM memory module |
| RH7-1331-000CN |
Motor - Main motor assembly |
| RB1-9095-020CN |
Mount - Envelope mount - Pivotal holder for envelope weight |
| RF5-2798-000CN |
Mount - Envelope mount - Pivotal holder for envelope weight |
| C4118-40002 |
Overlay - LaserJet 4000 control panel overlay (English) |
| C4118-40007 |
Overlay - LaserJet 4000 control panel overlay (French) |
| C4118-40008 |
Overlay - LaserJet 4000 control panel overlay (Italian) |
| C4118-40009 |
Overlay - LaserJet 4000 control panel overlay (Portuguese) |
| C4118-40010 |
Overlay - LaserJet 4000 control panel overlay (Norwegian) |
| C4118-40011 |
Overlay - LaserJet 4000 control panel overlay (Hungarian) |
| C4118-40012 |
Overlay - LaserJet 4000 control panel overlay (Swedish) |
| C4118-40013 |
Overlay - LaserJet 4000 control panel overlay (Polish) |
| C4118-40014 |
Overlay - LaserJet 4000 control panel overlay (Russian) |
| C4118-40015 |
Overlay - LaserJet 4000 control panel overlay (Czechoslovakian) |
| C4118-40017 |
Overlay - LaserJet 4000 control panel overlay (Korean) |
| C4118-40018 |
Overlay - LaserJet 4000 control panel overlay (Simplified Chinese) |
| C4118-40019 |
Overlay - LaserJet 4000 control panel overlay (Traditional Chinese) |
| C4118-40020 |
Overlay - LaserJet 4000 control panel overlay (German) |
| C4118-40021 |
Overlay - LaserJet 4000 control panel overlay (Spanish) |
| C4118-40022 |
Overlay - LaserJet 4000 control panel overlay (Danish) |
| C4118-40023 |
Overlay - LaserJet 4000 control panel overlay (Dutch) |
| C4118-40024 |
Overlay - LaserJet 4000 control panel overlay (Greek) |
| C4118-40025 |
Overlay - LaserJet 4000 control panel overlay (Finnish) |
| C4118-40026 |
Overlay - LaserJet 4000 control panel overlay (Turkish) |
| C4118-40027 |
Overlay - LaserJet 4000 control panel overlay (Hebrew) |
| C4118-40028 |
Overlay - LaserJet 4000 control panel overlay (Arabic) |
| C4118-40029 |
Overlay - LaserJet 4000 control panel overlay (Japanese) |
| C4118-40030 |
Overlay - LaserJet 4000 control panel overlay (Thailand) |
| RF5-3086-000CN |
Pad - Separation pad for tray 1 pickup assembly |
| RG5-5281-020CN |
Pad - Separation pad assembly, with black pastic arms. Pad is for Tray 1 pickup assembly |
| RB1-8841-000CN |
Panel - Toner cartridge access panel |
| RB1-8947-000CN |
Panel - Separation roller access panel |
| RB2-2400-000CN |
Panel - Left duplex access panel - Covers the left duplexer mount |
| RB2-2401-000CN |
Panel - Right duplex access panel - Covers the right duplexer mount |
| RG5-2648-110CN |
Paper Output Unit - Paper delivery assembly |
| C4118-67908 |
PC Board - Formatter board assembly |
| C4118-69008 |
PC Board - Formatter board assembly |
| C4118-69009 |
PC Board - Engine controller board - Provides all power supply and motor control functions, including power switch - 110 volts - Does not include insulator sheet or bottom metal plate |
| C4118-69010 |
PC Board - Engine controller board - Provides all power supply and motor control functions - 220 volt - Does not include insulator sheet or bottom metal plate |
| J3111-69001 |
PC Board - JetDirect 600N EIO internal print server 10Base-T, 10BASE-2, and LocalTalk LAN interface board - Has one RJ-45, BNC, and 8-pin DIN connector;Click to order the functional equivalent: J4135-61001 |
| J4135-61001 |
PC Board - JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port |
| RG5-2673-000CN |
PC Board - Lower tray logic PCA - With tray size switches for 500 sheet feeder. ( for 250 sheet feeder RG5-2685-000CN). |
| RG5-3693-080CN |
PC Board - Engine controller board - Provides all power supply and motor control functions, including power switch - 110 volts - Does not include insulator sheet or bottom metal plate |
| RG5-3694-080CN |
PC Board - Engine controller board - Provides all power supply and motor control functions - 220 volt - Does not include insulator sheet or bottom metal plate |
| RG5-3821-000CN |
PC Board - Lower tray logic PCA - With tray size switches for 500 sheet feeder. ( for 250 sheet feeder RG5-2685-000CN). |
| J3110A |
PC Board Interface - Ethernet 10Base-T (RJ-45) EIO network GENUINE HP JETDIRECT 600N internal print server PC board |
| J3111A |
PC Board Interface - Ethernet 10Base-T/10Base2 and LocalTalk (RJ-45, BNC, LocalTalk) EIO network PCA |
| J3112A |
PC Board Interface - JetDirect 600N token ring LAN interface board - DB-9 and RJ-45 connectors |
| J4135A |
PC Board Interface - JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port - Plugs in one of the EIO slots on selected DesignJet and LaserJet printers |
| J4167A |
PC Board Interface - JetDirect 610N token ring LAN interface board - DB-9 and RJ-45 connectors |
| J6057AR |
PC Board Interface - JetDirect 615N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector - Comes with software on CD-ROM and manual |
| J6057AR |
PC Board Interface - JetDirect 615N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector - Comes with software on CD-ROM and manual |
| J7934G |
PC Board Interface - HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM |
| RG5-2655-360CN |
Pickup Assembly - Tray 1 paper pickup assembly - Complete assembly including pickup roller, separation pad, sensor arm, retaining arm and drive solenoid |
| RG5-2672-000cn |
Pickup Assembly - 500 sheet paper pickup drive assembly |
| RG5-2672-140CN |
Pickup Assembly - 500 sheet paper pickup drive assembly |
| RB1-9371-000CN |
Plate - Adjustable paper length stop plate |
| RB2-2404-000CN |
Plate - Cover plate - Metal bottom plate that attaches to the engine controller PC board |
| RB2-2405-000CN |
Plate - Control panel ground plate - Metal clip that provides the ground connection for control panel |
| RF5-1867-000CN |
Plate - Pre-transfer ground plate assembly |
| RF5-2496-000CN |
Plate - Coupler gear mounting plate |
| RG5-2670-000CN |
Plate - Lower base plate - Bottom plate of 500 sheet feeder |
| RB1-8928-000CN |
Plunger - Tray identifier plunger - Identifies tray number installed |
| 8120-6802 |
Power Cord - Power cord (Flint Gray) - 2.3m (7.5ft) long - Has 90 degree (F) receptacle (for 220V in Europe, Saudi Arabia, South Africa, and India) |
| 8120-6805 |
Power Cord - Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has 90 degree receptacle (for 120V in the USA, Canada, Mexico, Philippines, and Taiwan) |
| C7833-60102 |
Power Module - Power supply module - 100-240VAC input, 50-60Hz - 24VDC output, 2.7A, 65 watts - Includes detachable AC power cord for use in North America (flat blade, polarized, ungrounded) |
| J3110-61001 |
Print Server - JetDirect 600N EIO Internal Print Server (10Base-T) LAN |
| J3111-61001 |
Print Server - JetDirect 600N EIO internal print server 10Base-T, 10BASE-2, and LocalTalk LAN interface board - Has one RJ-45, BNC, and 8-pin DIN connector |
| J3113-61001 |
Print Server - JetDirect 600N EIO Internal Print Server internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector |
| J6057A |
Print Server - JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector |
| J7934A |
Print Server - JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
| RG5-3696-000CN |
Receptacle - AC power receptacle - Connector and housing assembly |
| C4118A-Repair_LaserJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| H3969-60001 |
Roller - Paper path roller kit - Includes pickup D rollers (8 each) , Feed/Separation rollers (4 each) and Tray 1 pickup roller (1 each) - Installation procedure requires use of service manual |
| RB1-8865-000CN |
Roller - Paper pickup roller (D-shaped) - Sold individually |
| RB1-8877-000CN |
Roller - Pickup Roller Coupler |
| RB9-0684-000CN |
Roller - Fusing assembly pressure roller |
| RF5-1885-000CN |
Roller - Feed/separation roller - Roller is gray with blue tab protruding out one side |
| RF5-2484-000CN |
Roller - Pickup roller assembly |
| RG5-2652-070CN |
Roller - Registration assembly |
| RG5-2652-170CN |
Roller - Registration assembly |
| RG5-3718-000CN |
Roller - Tray 1 pickup roller assembly - D-shaped roller with blue shaft lock latch |
| RG5-4283-000CN |
Roller - Transfer roller assembly - Long metal shaft with Black roller and drive gear - Transfers static charge to the media being printed on |
| RG5-4290-000CN |
Roller - Fusing roller - Heating element and film sleeve - 110V |
| RG5-4290-100CN |
Roller - Fusing roller - Heating element and film sleeve - 110V |
| RG5-4291-000CN |
Roller - Fusing roller - Heating element and film sleeve - 220V |
| RG5-2642-000CN |
Sensor - Registration and feed sensors assembly - Includes PS102/103 |
| WG8-5624-000CN |
Sensor - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated |
| WG8-5849-000CN |
Sensor - Duplex re-pick sensor - Detects the leading edge of the page |
| C4118A-Manual_Laser |
Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. |
| 0410-4371 |
Service Parts - Xtal 39.85 for HP C3094A |
| 9100-5196 |
Service Parts - XFMR-Pulse for HP C3094A |
| 9222-1185 |
Service Parts - 9222-1185 |
| RB1-8674-000CN |
Shaft - Belt drive shaft |
| WG8-5362-000CN |
Shaft - Photo-sensor (TLP1241) - Sensor flag activated. |
| C6072-60304 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (German) |
| C6072-60305 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (French) |
| C6072-60306 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Spanish) |
| C6072-60307 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Italian) |
| RH7-5172-000CN |
Solenoid - Tray 1 paper pickup drive solenoid |
| RF5-2489-000CN |
Spindle - Separation roller mounting assembly |
| RB1-8693-000CN |
Spring - Toner cartridge drum ground spring |
| RB1-8695-000CN |
Spring - Toner cartridge sensing spring |
| RB1-8702-000CN |
Spring - Laser shutter spring - Provides tension for laser shutter |
| RB1-8827-000CN |
Spring - Leaf spring for HP LaserJet 4050 Series |
| RB1-8847-000CN |
Spring - Rear tray latch release spring |
| RB1-8927-000CN |
Spring - Left side frame leaf spring |
| RS5-2622-020CN |
Spring - Separation roller tension spring |
| RS5-2632-000CN |
Spring - Tension spring - Provides tension for pickup roller |
| RS5-2652-000CN |
Spring - Tray lock spring |
| RS5-2967-000CN |
Spring - Compression spring for tray identifier plunger |
| RS5-2981-000CN |
Spring - Paper stop spring - Provides tension for tray plate stop |
| C7833-40012 |
Stop - Upper fold chute stop - Used to set the position of the upper fold on the paper (or form) - Has `1-4` fold indicators - Inserts in the top of the print-to-mail accessory |
| C7833-40013 |
Stop - Lower fold chute stop - Used to set the position of the lower fold on the paper (or form) - Has `A-D` fold indicators - Inserts below the output bin slot on the print-to-mail accessory |
| RB1-9374-000CN |
Stop - Tray paper stop - Locks paper length plate in slot |
| RF5-2760-000CN |
Stop - Paper stop - Used for the 500-sheet paper tray |
| RB1-8671-000CN |
Support - Left side top cover support |
| RG5-2645-000CN |
Support - Right side top cover support assembly |
| RF5-1883-040CN |
Swing - Arm Swing for HP LaserJet 4000 Series |
| WC4-5139-000CN |
Switch - Top cover interlock access switch |
| C3122A |
Tray - 500 sheet tray - Letter/legal/A4 sizes - Paper cassette |
| C4124A |
Tray - LaserJet 4000/N/T/TN 500 Sheet feeder with universal paper tray - Holds up to 500 sheets of paper from A5 size to legal size paper |
| C4125-67901 |
Tray - 500 sheet universal paper tray assembly - This is ONLY the tray that holds the paper, NOT the optional feeder assembly (C4124A) that the printer sits on - Holds A5 to Legal size paper - Replaces C3122A Tray |
| C4126A |
Tray - HP LaserJet 4000T/4000TN Series universal paper tray - Letter, legal, Executive |
| C7833-40015 |
Tray - Output bin (Exit tray) - Holds the folded paper output - Can be adjusted for legal size forms, or the extendable portion can removed for large mailings (output drops into box) - Mounts to the rear of the pint-to-mail accessory |
| C8056-67901 |
Tray - 500-sheet tray/cassette - This is only the tray, does not include feeder or frame that tray goes into |
| C8056-69001 |
Tray - 500-sheet tray/cassette - This is only the tray, does not include feeder or frame that tray goes into |
| RB1-8843-000CN |
Tray - Rear output tray for Hewlett Packard LaserJet printers |
| RB1-8844-000CN |
Tray - Rear output tray pull-out extension |
| RB1-9088-000CN |
Tray - Envelope feeder input tray |
| RG5-2655-100CN |
Tray - Tray 1 paper pickup assembly - Complete assembly including pickup roller, separation pad, sensor arm, retaining arm and drive solenoid |
| RG5-2656-080CN |
Tray - Paper input tray (Tray 1) - Multi-Purpose tray assembly |
| C8055-67901 |
Tray Assembly - 500-sheet paper feeder and tray/cassette - This is the frame and tray that the printer sits on top of |
| C8055-69001 |
Tray Assembly - 500-sheet paper feeder and tray/cassette - This is the frame and tray that the printer sits on top of |
| C8055A |
Tray Assembly - LaserJet 4000/N/T/TN 500 Sheet feeder with universal paper tray - Holds up to 500 sheets of paper from A5 size to legal size paper |
| RF5-2511-000CN |
Weight - Envelope weight for envelope feeder unit. |
Techical Help
View service parts