HP parts for C4709AL DesignJet 750c

HP parts available for C4709AL HP DesignJet 750c

C3195-40017 Bracket - Carriage motor bracket

C1633-40082 Bushing - Pincharm spring retaining bushing

C2858-40017 Bushing - Rear slider rod bushing (Spring loaded) - Slides into the rear center of the carriage assembly

13242G Cable - RS-232C cable - 25-pin (M) to 25-pin (M) - 5.0m (16ft) long

17255D Cable - RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long

31391A Cable - RS-232C serial extension cable - 25-pin (M) to 25-pin (F) - 5.0m (16.4ft) long

5063-1256 Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long

5063-1257 Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long

C2951A Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long

C3195-60102 Cable - Ribbon cable with ferrite - Has 5-pin (F) connectors - 16.5cm (6.5in) long

C3195-80009 Cable - Carriage assembly trailing cable 36 inch E size plotter -with 2 ribbon cables bundled together - for hewlett packard designJet plotter DSJ 700 , 750, 755CM SERIES. OEM New HP, limited.

C3196-60056 Cable - Power supply cable - Has 12-pin (F) connectors - 39.7cm (15.6in) long

C3196-60057 Cable - Ribbon cable assembly (Black) - Contains a 12 wire 1.1m (3.8ft) cable and a 14 wire 1.3m (4.2ft) cable - Connectors are a 28-pin (F) connector, three 6-pin (F) marked `SVS`, `Bail`, and `Primer`, a 4-pin (F), and a 4-pin (M)

C1633-20012 Cam - Pinch arm bar cam (E-size) - Long rod from left to right side of printer - Used to lift the pinch arms

C2858-40043 Cap - Spindle end cap - Small core spacer - Removes for loading the media roll. Please order spindle assembly.

C3172-40006 Cap - Spindle end cap - Small core spacer - Removes for loading the media roll. Please order spindle assembly.

C4708-69113 Carriage - Pen carriage assembly - Drafting `Head` for the plotter (holds tri-color and one black ink cartridges) - Front bushing is included and cannot be ordered separately

51642M Cartridge - Cartridge for DesignJet-C1633A, DesignJet 600, DesignJet 650, DesignJet 200 E size

51644C Cartridge - 44 Cyan InkJet Print Cartridge (USA)

51644M Cartridge - 44 Magenta InkJet Print Cartridge (USA)

51644Y Cartridge - 44 Yellow InkJet Print Cartridge (USA)

51645A Cartridge - InkJet Crtg 45A Black Large NAM

51645G Cartridge - Black print cartridge (economy) - Prints approximately 415 pages based on 5% density on a 8 inch by 10 inch print area (USA)

C6613AN Cartridge - Black print cartridges (high capacity) - (two-pack of 51645A) each prints approximately 840 pages based on 5% density on a 8-inch (20.3cm) by 10-inch (25.4cm) print area (USA)

C3195-40026 Clamp - Ribbon cable clamp (top half) - Secures the trailing cable to the top of the carriage assembly

C3195-40027 Clamp - Ribbon cable clamp (bottom half) - Secures the trailing cable to the top of the carriage assembly

C6247A Cleaner - DesignJet cleaning kit - Includes cleaning solution and 20 cleaning rags

C4698A Color Kit - Color management kit - Includes pantone tables for Windows and Macintosh applications, Kodak precision profiles, Photoshop and IGC profiles in 4 disks, and color management user guide

C1633-00031 Cover - MIO slot access cover

C3195-00009 Cover - SIMM slot access cover - Metal cover that mounts to the back cover/panel on the electronic enclosure assembly

C3195-40047 Cover - Housing cover (L-shaped) - Right side cover (Cap) for the power switch housing (for enclosing the power switch)

C3196-60039 Cover - Cover assembly - Metal center cover that lift-up viewing window mounts to - Includes `T` shaped latches and mounting screws

C3196-60053 Cover - Back cover/panel - Metal cover for the electronic enclosure assembly

C4705-60106 Cover - Left end cover for HP DesignJet 750C Series

C4705-60114 Cover - Right end cover - Has cut outs for the control panel buttons lights and display - Does NOT include an overlay

C4706-60084 Cover - Rollfeed access cover - Opens forward to allow access to paper spindle assembly - Includes cover and springs

C4706-60088 Cover - Unicover assembly - Plastic cover which is used in place of the center cover, electrical cover assembly, SIMM cover, and SIMM barrier

C3193-60001 Cross Brace - Cross-brace - Brace that connects and supports the two stand legs

C2858-60021 Cutter - Cutter mechanism assembly - Auto cutter for rollfeed paper

C3195-40066 Deflector - Fan deflector - Deflects air from fan to prevent printing errors - Installed on metal structure of chassis below the carriage slider rods

C3196-60029 Enclosure - Cutter assembly enclosure bar - Mounts to left and right side side plates of chassis (Mounting bar for the media guides)

Q5763-60001 Faceplate - Faceplate, Painted

C3190-60137 Fan - Tubeaxial fan for HP DesignJet 750C Series

51642A Film - Polyester matte film - 61cm (24in) x 36.6m (120ft) roll

51642B Film - Polyester matte film - 91.4cm (36in) x 36.6m (120ft) roll

51642C Film - Polyester matte film - B size (11 x 17-inches) - 40 sheets

51642G Film - Polyester Matte Film - D Size - 22 x 34 inches (40 Sheets)

51642H Film - Film (Matte) for DesignJet-C1633A, DesignJet 600, DesignJet 650, DesignJet 200 D size

51642J Film - Polyester matte film - Architectural D size (24 x 36-inches) - 40 sheets

51642K Film - Polyester matte film - E size (34 x 44-inches) - 40 sheets

51642N Film - Polyester matte film - Architectural E size (36 x 48-inches) - 40 sheets

C1826A Film - High-gloss white film - Architectural E size (36 x 48-inches) - 100 sheets

C1827A Film - High-gloss white film - Architectural D size (24 x 36-inches) - 100 sheets

C1828A Film - Film (Glossy) for DesignJet 700 Series, DesignJet 455, DesignJet 450, DesignJet 750

C3875A Film - Clear film (4 mil) - 91.4cm (36in) x 22.9m (75ft) roll

C3876A Film - Clear film (4 mil) - 61cm (24in) x 22.9m (75ft) roll

C3885A Film - High gloss white film (4 mil) - 91.4cm (36in) x 30.5m (100ft) roll

C3886A Film - High gloss white film (4 mil) - 61cm (24in) x 30.5m (100ft) roll

Q1427B Film - High gloss white film (4 mil) - 91.4cm (36in) x 30.5m (100ft) roll

C3195-60151 Firmware - Code ROM SIMM (Firmware) (Ver. A.02.10) - Plugs into socket on the main logic board

C4708-60117 Firmware - Code ROM SIMM (Revision M.01.12 firmware) - Plugs into socket on the main logic board

C4696-60006 Foot - Foot assembly (includes casters) - Mounts to the bottom of the plotter stand legs (two used)

C3195-60038 Front Panel - Front (Control) panel and cable assembly for HP Designjet Plotter. Only control panel may not include overlay plastic face.

C1633-40019 Gear - Overdrive gear cluster

C4705-60089 Gear Assembly - Clutch / overdrive gear assembly - Includes gear, clutch, retaining clip, and two washers

C1633-60032 Guard - Starguard assembly

C3195-40024 Holder - Cable holder (Small U-Shaped piece on top) - One of two pieces that hold the trailing cable to the main chassis

C3195-40025 Holder - Cable holder (Large piece on bottom) - One of two pieces that hold the trailing cable to the main chassis

C3180-40012 Housing - Switch housing (mount) - For protecting the power switch

C4704-60082 Housing - Housing assembly (on left side)

C4706-60092 Housing - Electronic housing assembly (PC board enclosure)

C3195-60061 Kit - DesignJet 750C manual kit - Includes user's guide, quick reference guide and front panel overlay (English)

C3195-60062 Kit - DesignJet 750C manual kit - Includes user's guide, quick reference guide and front panel overlay (Korean)

C3195-60063 Kit - DesignJet 750C manual kit - Includes user's guide, quick reference guide and front panel overlay (for taiwan)

C3195-60064 Kit - DesignJet 750C manual kit - Includes user's guide, quick reference guide and front panel overlay (German)

C3195-60065 Kit - DesignJet 750C manual kit - Includes user's guide, quick reference guide and front panel overlay (French)

C3195-60066 Kit - DesignJet 750C manual kit - Includes user's guide, quick reference guide and front panel overlay (Spanish)

C3195-60067 Kit - DesignJet 750C manual kit - Includes user's guide, quick reference guide and front panel overlay (Italian)

C3195-60068 Kit - DesignJet 750C manual kit - Includes user's guide, quick reference guide and front panel overlay (Japanese)

C3195-60069 Kit - DesignJet 750C manual kit - Includes user's guide, quick reference guide and front panel overlay (Portuguese)

C3195-60070 Kit - DesignJet 750C manual kit - Includes user's guide, quick reference guide and front panel overlay (Chinese)

C4704-60095 Kit - Hardware kit for printer stand - Includes screwdriver, screws, washers, and media bin retaining clips

C4705-60021 Kit - DesignJet 700/750C Plus manual kit - Includes user`s guide, quick reference guide, and front panel overlay (English)

C4705-60022 Kit - DesignJet 700/750C Plus manual kit - Includes user's guide, quick reference guide, and front panel overlay (Korean)

C4705-60024 Kit - DesignJet 700/750C Plus manual kit - Includes user's guide, quick reference guide, and front panel overlay (German)

C4705-60025 Kit - DesignJet 700/750C Plus manual kit - Includes user's guide, quick reference guide, and front panel overlay (French)

C4705-60026 Kit - DesignJet 700/750C Plus manual kit - Includes user's guide, quick reference guide, and front panel overlay (Spanish)

C4705-60027 Kit - DesignJet 700/750C Plus manual kit - Includes user's guide, quick reference guide, and front panel overlay (Italian)

C4705-60028 Kit - DesignJet 700/750C Plus manual kit - Includes user's guide, quick reference guide, and front panel overlay (Japanese)

C4705-60029 Kit - DesignJet 700/750C Plus manual kit - Includes user's guide, quick reference guide, and front panel overlay (Portuguese)

C4705-60030 Kit - DesignJet 700/750C Plus manual kit - Includes user's guide, quick reference guide, and front panel overlay (Chinese)

C3195-00057 Label - Safety label - Provides warning that encoder strip is sharp

C3195-40060 Latch - Center cover latch

C4696-60007 Leg - Leg assembly - Side support for the plotter - Does NOT include the foot assembly

C3195-60116 Lifter - Pincharm lift assembly - Does NOT include pincharm bar cam - Includes pinchwheel manual lift handle, spring, sensor, rocker plate, cam drive, cam journals, wire linkages, nuts, screws, and washer

6040-0855 Lubricant - SYNTHETIC OIL (4oz Plastic Bottle) Front and Rear Slider Rods Synthetic oil - One plastic bottle of 3.5oz / 118.29 ML

C3195-69166 Maintenance Kit - Maintenance kit - Includes service station (spittoon) assembly, carriage (Y-Axis) motor, encoder strip, and lubricating oil

5959-9733 Manual - Manual for Designjet 820 MFP Series, DesignJet-C1633A, DesignJet 600, DesignJet 650

C4705-60023 Manual - DesignJet 700/750C Plus manual kit - Includes users guide, Quick Reference Guide, and front panel overlay (Taiwan)

C4705-90000 Manual - DesignJet 700, 750C, 750C plus and 755CM service manual (2nd edition, August 1996) - Note: Coverage limited to C3195A, C3196A, C3198A, C3198B, C4705A, C4706A, C4708A, and C4709A. Pick on C3196A-Manual

C4706-60097 Media Bin - Media bin - Wire rack that mounts to the plotter stand legs and cross brace

C3146-67901 Memory - 16MB SIMM memory module

D3578-69001 Memory - 32MB, 70nS, 36-bit parity SIMM memory module

J2382-69003 Module - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors

J2590-69001 Module - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors

J2592-69001 Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

J4102-61021 Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

J4102-69022 Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

C3195-60009 Motor - Bail stepper motor - Used to drive the bail assembly

C3195-60112 Motor - Carriage drive motor assembly - Includes motor and cable

C4705-60068 Motor - Paper (X-axis) drive motor (includes helical drive gear - NOTE: motor and gear are only sold as a set

C3195-00019 NamePlate - Nameplate - DesignJet 750C printer logo

C4708-00020 NamePlate - Nameplate - DesignJet 750C Plus logo

C4706-60121 Overdrive Assembly - Overdrive support assembly (E)

C3195-60041 Overlay - Front panel overlay (Self adhesive) - Shows the function of the front panel buttons and indicator lights (English)

C3195-60042 Overlay - Front panel overlay (Self adhesive) - Shows the function of the front panel buttons and indicator lights (Korean)

C3195-60043 Overlay - Front panel overlay (self adhesive) - Shows the function of the front panel buttons and indicator lights (Taiwan)

C3195-60044 Overlay - Front panel overlay (Self adhesive) - Shows the function of the front panel buttons and indicator lights (German)

C3195-60045 Overlay - Front panel overlay (Self adhesive) - Shows the function of the front panel buttons and indicator lights (French)

C3195-60046 Overlay - Front panel overlay (Self adhesive) - Shows the function of the front panel buttons and indicator lights (Spanish)

C3195-60047 Overlay - Front panel overlay (Self adhesive) - Shows the function of the front panel buttons and indicator lights (Italian)

C3195-60048 Overlay - Front panel overlay (self adhesive) - Shows the function of the front panel buttons and indicator lights (Japanese)

C3195-60049 Overlay - Front panel overlay (Self adhesive) - Shows the function of the front panel buttons and indicator lights (Portuguese)

C3195-60050 Overlay - Front panel overlay (Self adhesive) - Shows the function of the front panel buttons and indicator lights (Chinese)

C1830A Paper - Coated paper - E size (34 x 44-inches) - 100 sheets

C1831A Paper - Coated paper - D size (22 x 34-inches) - 100 sheets

C1832A Paper - Coated paper - Architectural E size (36 x 48-inches) - 100 sheets

C1833A Paper - Coated paper - Architectural D size (24 x 36-inches) - 100 sheets

C1834A Paper - Paper (Coated) for DesignJet 750, DesignJet 755, DesignJet 700 Series, DesignJet 430

C1860A Paper - HP Bright white InkJet paper - 61cm (24in) x 45.7m (150ft) roll

C1861A Paper - HP Bright white InkJet paper - 91.4cm (36in) x 45.7m (150ft) roll

C3850A Paper - Opaque bond paper - 91.4cm (36in) x 45.7m (150ft) roll

C3851A Paper - Opaque bond paper - 61cm (24in) x 45.7m (150ft) roll

C3852A Paper - Opaque bond paper - E size (34 x 44-inches) - 100 sheets

C3853A Paper - Opaque bond paper - D size (22 x 34-inches) - 100 sheets

C3854A Paper - Opaque bond paper - Architectural E size (36 x 48-inches) - 100 sheets

C3855A Paper - Bright White Inkjet Paper - 61cm (24in) x 45.7m (150ft) roll

C3856A Paper - Opaque bond paper - A0 size (84.1cm x 118.9cm) - 125 sheets

C3857A Paper - Opaque bond paper - A1 size (59.4cm x 84.1cm) - 125 sheets

C3860A Paper - Translucent bond paper - 61cm (24in) x 45.7m (150ft) roll

C3872A Paper - Natural tracing paper - A0 size (84.1cm x 118.9cm) -125 sheets

C3873A Paper - Natural tracing paper - A1 size (59.4cm x 84.1cm) - 125 sheets

C3881A Paper - High gloss photo paper - 91.4cm (36in) x 30.5m (100ft) roll

C3882A Paper - High gloss photo paper - 61cm (24in) x 30.5m (100ft) roll

C3892A Paper - Paper for DesignJet 430, DesignJet 700 Series, DesignJet 450, DesignJet 455

C6036A Paper - Bright white InkJet paper - 91.4cm (36in) x 45.7m (150ft) roll

C6810A Paper - Bright white InkJet paper - 91.4cm (36in) x 91.4m (300ft) roll

C7923A Paper - Basic heavyweight paper - 61cm (24in) x 30.5m (100ft) roll (USA and Asia/Pacific)

C7924A Paper - Basic Heavyweight Paper - 91.4cm (36in) x 30.5m (100ft) roll (USA and Asia/Pacific)

C3195-69101 PC Board - Main Logic board - Includes integrated RS232-C (Serial) and bi-tronics/centronics (Parallel) interface ports

C4708-69001 PC Board - Main Logic board - Includes integrated RS232-C (Serial) and bi-tronics/centronics (Parallel) interface ports

J2550-69013 PC Board - EtherTwist 10Base-T LAN interface board

J2555-69013 PC Board - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors

J4100-69001 PC Board - JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors

J2550B PC Board Interface - EtherTwist (10Base-T) LAN interface board, JetDirect card has one 10 Mbps RJ45 Ethernet connector.

J2552B PC Board Interface - LAN and LocalTalk interface - Has EtherTwist (10Base-T) , ThinLAN (10Base-2) , and LocalTalk (DIN-8) connectors

J2555B PC Board Interface - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors

J2590A PC Board Interface - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors

J2591-69001 PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors

J2591A PC Board Interface - External JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors

J2594-69001 PC Board Interface - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors

J3258-61041 PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN

J3258B PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN

J3264A PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN

J3265-69001 PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors

J3265G PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN

J4101B PC Board Interface - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network

0957-2340 Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.

0957-2481 Power Module - Pwra brk uni 12vdc 15w

Q5763-60002 Scanner - Scanner - CIS, CMOS, PIC

0515-4576 Screw - Screw-mach m3 x 0.5 6.9mm-lg pan-hd

0591-0090 Screw - Plastite screw (threaded insert mold-in, Textron K40) - M4.0 x 0.7, 20mm long, Torx T15

0624-0795 Screw - Screw Filter

C7769-90066 Service Manual - DesignJet support DVD-ROM - Version A.04.01 - Has product information, user's manuals, service manuals, diagnostic software, test drawings, newsletters, and service notes

Q1254-60025 Service Parts - English/korean for HP 32054F

Q1660-60008 Service Parts - Lid-paint-alloy

C1633-80005 Spring - Compression spring - Installed between pincharm assembly and bushing

C3195-94001 Training - Additional self paced training test - Contains 1 test for DesignJet 750C, 755CM

C3861A Vellum - Vellum - 91.4cm (36in) x 45.7m (150ft) roll

HP DesignJet 750c (C4709AL)

HP parts available for C4709AL HP DesignJet 750c