| C4723-60238 |
Adjuster - Adjustment kit - Includes instructions, empty cartridge, digitizing sight (magnifier) and gauge |
| C4723-60279 |
Bail - Bail assembly - Mounting strip assembly for the starwheel mount assemblies (Not included) - Extends width of plotter |
| C4723-60235 |
Belt - Carriage (Y-axis) belt - Drives the carriage assembly for 54 inch size plotters. (36 inch size order C4704-60207) |
| C4704-00005 |
Bracket - Y-axis motor bracket - Includes edge wire saddle - Holds the Y-Axis motor |
| C1633-40082 |
Bushing - Pincharm spring retaining bushing |
| C3195-40076 |
Bushing - Cutter bushing - Connects cutter assembly to slider rod |
| C4704-40084 |
Bushing - Rear slider rod bushing - Spring loaded |
| 5063-1256 |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| 5063-1257 |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| 92215S |
Cable - RS-422 serial cable - 8-pin (M) to 8-pin (M) - 2.0m (6.6ft) long |
| C2950A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| C2951A |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| C2990A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long |
| C2991A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long |
| C4704-60021 |
Cable - Hard drive power cable - Has 4-pin (F) connectors - 47.6cm (18.8in) long |
| C4704-60022 |
Cable - Ribbon cable for one IDE drive - Has 40-pin (F) connectors - 31.8cm (12.5in) long |
| C4704-60024 |
Cable - Ribbon cable assembly - Has 28-pin (F) connectors - 23.5cm (9.3in) long |
| C4723-60025 |
Cable - Ribbon cable assembly with ferrite - Has 28-pin (F) connectors - 1.7m (5.6ft) long |
| C4723-60237 |
Cable - Carriage assembly trailing cable - Three ribbon cables bundled together - 2.4m (7.7ft) long, 54 inches. |
| C3180-40020 |
Cam - Pinch arm cam - Attached to pinch arm (Media) lever |
| C3190-60149 |
Cam - Left cam journal - Mounted on left end of pinch arm shaft |
| C6771A |
Canvas - Studio canvas (368 gsm) - 91.4cm (36in) x 10.7m (35ft) roll - For regular ink or UV resistant ink |
| C6773A |
Canvas - Studio canvas (368 gsm) - 137.2cm (54in) x 10.7m (35ft) roll - For regular ink or UV-resistant ink |
| C7966A |
Canvas - Canvas with matte finish - 61cm (24in) x 10.7m (35ft) roll (USA) |
| C7967A |
Canvas - Canvas with matte finish - 91.4cm (36in) x 10.7m (35ft) roll (USA) |
| C7968A |
Canvas - Canvas with matte finish - 106.7cm (42in) x 10.7m (35ft) roll (USA) |
| C2858-40043 |
Cap - Spindle end cap - Small core spacer - Removes for loading the media roll. Please order spindle assembly. |
| 5183-5283 |
Cartridge - Return kit (Box and instructions) - For returning defective large format printer ink systems covered under CREW program |
| C1806A |
Cartridge - Black ink system - Includes print head, print head cleaner and ink cartridge |
| C1807A |
Cartridge - Cyan ink system - Includes print head, print head cleaner and ink cartridge |
| C1808A |
Cartridge - Magenta ink system - Includes print head, print head cleaner and ink cartridge |
| C1809A |
Cartridge - Yellow ink system - Includes print head, print head cleaner and ink cartridge |
| C1892A |
Cartridge - Black UV ink system - Includes print head, print head cleaner and ink cartridge |
| C1893A |
Cartridge - Cyan UV ink system - Includes print head, print head cleaner and ink cartridge |
| C1894A |
Cartridge - Magenta UV ink system - Includes print head, print head cleaner and ink cartridge |
| C1895A |
Cartridge - Yellow UV ink system - Includes print head, print head cleaner and ink cartridge |
| C4704-40085 |
Clamp - Trailing cable clamp - Secures the trailing cable to the carriage assembly |
| C4723-40086 |
Clamp - Trailing cable holder |
| C6247A |
Cleaner - DesignJet cleaning kit - Includes cleaning solution and 20 cleaning rags |
| C4704-00004 |
Cover - Modular Input/Output (MIO) cover - Mounts on top of electronics module |
| C4704-00033 |
Cover - SIMM slot cover |
| C4704-40057 |
Cover - Electronics module left cover - Louvered cover on rear of plotter |
| C4704-40058 |
Cover - Electronics module right cover - Mounts on rear of plotter |
| C4704-40080 |
Cover - Encoder strip roof |
| C4704-60117 |
Cover - One Line sensor lens cover for carriage - Mounts to carriage assembly for HP Designjet Plotters. |
| C4704-60274 |
Cover - Electronics module cover - Mounts to rear of plotter - Includes SIMM cover |
| C4723-00010 |
Cover - Rear cover - Located next to electronics module cover |
| C4723-20008 |
Cover - Electronics module center cover - Located between electronics module cover and rear cover |
| C4723-60115 |
Cover - Right end cover - Has cut outs for the control panel |
| C4723-60116 |
Cover - Left end cover for HP DesignJet 2000CP |
| C4723-60245 |
Cover - Rollfeed access cover - Opens forward to allow access to paper spindle assembly |
| C4723-60077 |
Cross Brace - Cross-brace - Brace that connects and supports the two stand legs |
| C4723-60244 |
Cutter - Cutter assembly - Auto cutter for rollfeed paper |
| C4724-60021 |
Drive Assembly - 4.3GB hard disk drive. This Hard Disk Drive is the direct replacement part for the internal hard disk drive for the HP DesignJet 2500cp, 3500CP, 3800CP, and other models. |
| C4704-60033 |
Elevator - Elevator platform assembly - Raises and lowers ink cartridges to fill the print heads - Located on left side of plotter |
| 9170-1687 |
Ferrite Assembly - Ferrite core - Installed on Y-AXIS motor cable |
| C1882A |
Film - 3M 8522CP opaque imaging media - 137.2cm (54in) x 13.7m (45ft) roll - Flexible white opaque vinyl with removable pressure sensitive adhesive backing for outdoor use - UV ink only |
| C1884A |
Film - 3M 8519CP Lustre (semi-gloss) Overlaminate - 137.2cm (54in) x 22.9m (75ft) roll - Vinyl with pressure sensitive adhesive backing - Used to protect 3M 8522CP opaque imaging media |
| C1886A |
Film - 3M 8520CP matte overlaminate - 137.2cm (54in) x 22.9m (75ft) roll - Vinyl with pressure sensitive adhesive backing - Used to protect 3M 8522CP opaque imaging media |
| C6760A |
Film - 3M 8522CP opaque imaging media - 91.4cm (36in) x 13.7m (45ft) roll - Flexible white opaque vinyl with removable pressuresensitive adhesive backing for outdoor use - UV ink only |
| C6761A |
Film - 3M 8519CP lustre (Semi-gloss) overlaminate - 91.4cm (36in) x 22.9m (75ft) roll - Vinyl with pressure sensitive adhesive backing - Used to protect 3M 8522CP opaque imaging media |
| C6762A |
Film - 3M 8520CP matte overlaminate - 91.4cm (36in) x 22.9m (75ft) roll - Vinyl with pressure sensitive adhesive backing - Used to protect 3M 8522CP opaque imaging media |
| C6794A |
Film - Durable Imaging glossy UV media - For UV ink only - 91.4cm (36in) x 30.5m (100ft) roll |
| C6795A |
Film - Durable Imaging glossy UV media - For UV ink only - 137.2cm (54in) x 30.5m (100ft) roll |
| C7955A |
Film - Film (Opaque) for DesignJet 2800, DesignJet 3800, DesignJet 3000, DesignJet 5000 Series |
| C7956A |
Film - Film (Opaque) for DesignJet 5000 Series, DesignJet 800 Series, DesignJet 1055 Series, DesignJet 500 |
| C7957A |
Film - Film (Opaque) for DesignJet 800 Series, DesignJet 5000 Series, DesignJet 500, DesignJet 3500 |
| C7958A |
Film - Film (Opaque) for DesignJet 800 Series, DesignJet 5000 Series, DesignJet 500, DesignJet 3500 |
| Q1737A |
Film - Film (Matte) for DesignJet 500, DesignJet 800 Series, DesignJet 3000, DesignJet 3500 |
| Q1908A |
Film - Film (Adhesive) for DesignJet 2000, DesignJet 3000, DesignJet 1050 Series, DesignJet 1055 Series |
| Q1914A |
Film - Film (Transparency) for DesignJet 2000, DesignJet 3000, DesignJet 1050 Series, DesignJet 1055 Series |
| Q1915A |
Film - Film (Transparency) for DesignJet 2000, DesignJet 3000, DesignJet 1050 Series, DesignJet 1055 Series |
| C4723-60294 |
Firmware - Firmware SIMM kit (Revision A.04.08) - Mounts in the electronics module - NOTE: this is not a postscript SIMM |
| C4723-69294 |
Firmware - Firmware SIMM kit (Revision A.04.08) - Mounts in the electronics module - NOTE: this is not a postscript SIMM |
| C4704-40007 |
Flag - Service station flag - Spring loaded flag on right side of service station |
| C4723-60086 |
Foot - Foot assembly one ea. (includes casters) - Mounts to the bottom of the plotter stand legs (two used) |
| C4704-60255 |
Front Panel - Front (Control) panel and cable assembly for HP Designjet Plotter. Only control panel may not include overlay plastic face. |
| C1633-40019 |
Gear - Overdrive gear cluster |
| C4704-00016 |
Ground - Encoder ground strap - Provides ground to end of encoder strip |
| C4704-00035 |
Ground - Ground strap - Attached to Y-AXIS bracket |
| C4723-60250 |
Guard - Starguard starwheel cover assembly |
| C4723-60110 |
Guide - Media guide bar |
| C4724-69021 |
Hard Drive - 4.3GB hard disk drive. This Hard Disk Drive is the direct replacement part for the internal hard disk drive for the HP DesignJet 2500cp, 3500CP, 3800CP, and other models. |
| C4704-60218 |
Holder - Quick reference holder pocket - Holds quick reference guides and media knife - Mounted on rear of right end cover |
| C4704-60082 |
Housing - Housing assembly (on left side) |
| C4723-60095 |
Kit - Hardware kit - Includes screwdriver and screws for printer stand |
| C4724-60011 |
Kit - DesignJet 3000CP/3500CP manual kit - Includes assembly instructions, setup guide, user's guide, quick reference guide and network connection guide (English) |
| C4704-60075 |
Leg - Leg assembly - Side support for the plotter - Does NOT include the foot assembly |
| C4704-40059 |
Lever - Pinch arm (media) lever - Used when loading paper |
| C4723-00025 |
Link - Front wire link |
| 6040-0855 |
Lubricant - SYNTHETIC OIL (Aoz Plastic Bottle) Front and Rear Slider Rods. |
| 6040-0858 |
Lubricant - Lubricant : Special lubricating oil - For carriage slider rod surface - 4oz (113g) plastic bottle of synthetic oil |
| 6040-0911 |
Lubricant - Special lubricating oil - For carriage slider rod surface - (syringe with 35cc oil) |
| C3190-60155 |
Lubricant - Grease - GREASE APPLICATION KITGrease - For helical gear (Drive roller gear) |
| C4723-60141 |
Maintenance Kit - Preventive maintenance kit - Contains Carriage Assembly, line sensor cover, encoder strip, Y-AXIS pulley, belt, motor, cutter, silicon grease, plastic surface cleaner, synthetic oil and wipes (on check out notes let us know if 36inch or 54inch plotter.) |
| 5959-9733 |
Manual - Manual for Designjet 820 MFP Series, DesignJet-C1633A, DesignJet 600, DesignJet 650 |
| 5959-9734 |
Manual - Manual for DesignJet 2000, DesignJet 2500, DesignJet 430, DesignJet 450 |
| C6072-60281 |
Manual - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (English) |
| C6072-60301 |
Manual - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (English) |
| C7779-60041 |
Manual - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (English) |
| 1818-6171 |
Memory - 4MB EDO (Extended Data Output) DRAM SIMM memory module |
| 1818-6172 |
Memory - 8MB EDO (Extended Data Output) DRAM SIMM memory module |
| C4723-60263 |
Memory - 8MB EDO (Extended Data Output) DRAM SIMM memory module |
| C4723-60264 |
Memory - 16MB, 60nS EDO (Extended Data Output) DRAM SIMM memory module |
| C6229A |
Memory - 4MB SIMM memory module - For DesignJet CP printer |
| C6230A |
Memory - 8MB SIMM memory module - For DesignJet CP printer |
| C6231A |
Memory - 16MB SIMM memory module - For DesignJet 400, 700, CP series printers |
| C6232A |
Memory - 32MB SIMM memory module upgrade - For DesignJet 400, 700, CP series printers |
| C4723-60114 |
Module - Electronics module - Includes power supply, fan, and main board |
| C4723-69114 |
Module - Electronics module - Includes power supply, fan, and main board |
| J2590-61011 |
Module - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors |
| J2590-69001 |
Module - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors |
| J2593-69001 |
Module - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) input connectors and three parallel (DB-25) output connectors w/power supply. |
| J2594-61011 |
Module - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors |
| C4723-60040 |
Motor - Bail motor for HP DesignJet 3000CP |
| C4723-60277 |
Motor - Carriage (Y-Axis) motor assembly - Drives carriage belt - Includes motor, motor holder, and cable |
| C4723-60303 |
Motor - X-axis motor assembly - Includes motor, belt, and worm gear -Order X-axis motor assembly kit |
| C4724-60053 |
Motor - X-Axis motor assembly kit - New design does not use a belt - Kit includes motor with attached worm gear, helical gear, motor mount, screws and nuts for mounting the parts. |
| C4724-69053 |
Motor - X-motor assembly. motor, belt, and worm gear. (same as c4724-60053) |
| C4723-60234 |
Overdrive Assembly - Overdrive assembly - Includes overdrive shims, clutch and overdrive gear |
| C4723-60201 |
Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (English) |
| C4723-60202 |
Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (Korean) |
| C4723-60203 |
Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (Taiwanese) |
| C4723-60204 |
Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (German) |
| C4723-60205 |
Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (French) |
| C4723-60206 |
Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (Spanish) |
| C4723-60207 |
Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (Italian) |
| C4723-60208 |
Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (Japanese) |
| C4723-60209 |
Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (Portuguese) |
| C4723-60210 |
Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (Chinese) |
| C6019B |
Paper - Coated paper (98 gsm) - 61cm (24in) x 45.7m (150ft) roll (USA, Canada, and Latin America) |
| C6020B |
Paper - Coated paper (98 gsm) - 91.4cm (36in) x 45.7m (150ft) roll (USA, Canada, and Latin America) |
| C6021B |
Paper - Heavyweight coated paper - 61cm (24in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
| C6022B |
Paper - Heavyweight coated paper - 91.4cm (36in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
| C6023A |
Paper - Semi-gloss photo paper - 61cm (24in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
| C6024A |
Paper - Semi-gloss photo paper - 91.4cm (36in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
| C6025A |
Paper - High gloss photo paper - 61cm (24in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
| C6026A |
Paper - High gloss photo paper - 91.4cm (36in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
| C6027A |
Paper - Coated paper (98 gsm) - 61cm (24in) x 45.7m (150ft) roll (Europe, Asia/Pacific, and Japan) |
| C6028A |
Paper - Coated paper (98 gsm) - 91.4cm (36in) x 45.7m (150ft) roll (Europe, Asia/Pacific, and Japan) |
| C6029C |
Paper - Heavyweight coated paper - 61cm (24in) x 30.5m (100ft) roll - For regular or UV resistant ink |
| C6030B |
Paper - Heavyweight coated paper - 91.4cm (36in) x 30.5m (100ft) roll (Europe, Asia/Pacific, and Japan) |
| C6030C |
Paper - Heavyweight coated paper - 91.4cm (36in) x 30.5m (100ft) roll - For regular or UV resistant ink |
| C6031A |
Paper - Semi-gloss photo paper - 61cm (24in) x 30.5m (100ft) roll (Europe, Asia/Pacific, and Japan) |
| C6032A |
Paper - Semi-gloss photo paper - 91.4cm (36in) x 30.5m (100ft) roll (Europe, Asia/Pacific, and Japan) |
| C6033A |
Paper - High gloss photo paper - 61cm (24in) x 30.5m (100ft) roll (Europe, Asia/Pacific, and Japan) |
| C6034A |
Paper - High gloss photo paper - 91.4cm (36in) x 30.5m (100ft) roll (Europe, Asia/Pacific, and Japan) |
| C6559B |
Paper - Coated paper (98 gsm) - 106.7cm (42in) x 45.7m (150ft) roll (USA, Canada, and Latin America) |
| C6560B |
Paper - Coated paper (98 gsm) - 137.2cm (54in) x 45.7m (150ft) roll (USA, Canada, and Latin America) |
| C6561B |
Paper - Heavyweight coated paper - 106.7cm (42in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
| C6562B |
Paper - Heavyweight coated paper - 137.2cm (54in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
| C6563A |
Paper - Semi-gloss photo paper - 106.7cm (42in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
| C6564A |
Paper - Semi-gloss photo paper - 137.2cm (54in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
| C6565A |
Paper - High gloss photo paper - 106.7cm (42in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
| C6566A |
Paper - High gloss photo paper - 137.2cm (54in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
| C6567B |
Paper - Coated paper (98 gsm) - 106.7cm (42in) x 45.7m (150ft) roll (Europe, Asia/Pacific, and Japan) |
| C6568B |
Paper - Paper (Coated) for DesignJet 3800, DesignJet 5000 Series, DesignJet 5100 Series, Designjet 820 MFP Series |
| C6569B |
Paper - Heavyweight coated paper - 106.7cm (42in) x 30.5m (100ft) roll (Europe, Asia/Pacific, and Japan) |
| C6569C |
Paper - Heavyweight coated paper - 106.7cm (42in) x 30.5m (100ft) roll - For regular or UV resistant ink |
| C6570B |
Paper - Heavyweight coated paper - 137.2cm (54in) x 30.5m (100ft) roll (Europe, Asia/Pacific, and Japan) |
| C6570C |
Paper - Heavyweight coated paper - 137.2cm (54in) x 30.5m (100ft) roll - For regular or UV resistant ink |
| C6571A |
Paper - Paper (Semi-Glossy) for DesignJet 3000, DesignJet 3500, DesignJet 3800, Designjet 820 MFP Series |
| C6572A |
Paper - Paper (Semi-Glossy) for DesignJet 3000, DesignJet 3500, DesignJet 3800, Designjet 820 MFP Series |
| C6573A |
Paper - High gloss photo paper - 106.7cm (42in) x 30.5m (100ft) roll (Europe, Asia/Pacific, and Japan) |
| C6574A |
Paper - High gloss photo paper - 137.2cm (54in) x 30.5m (100ft) roll (Europe, Asia/Pacific, and Japan) |
| C6778A |
Paper - Colorlucent backlit UV paper - 91.4cm (36in) x 30.5m (100ft) roll - For UV (pigmented) inks ONLY |
| C6779A |
Paper - Colorlucent backlit UV paper - 137.2cm (54in) x 30.5m (100ft) roll - For UV (pigmented) inks ONLY |
| C6782A |
Paper - Paper based semi-gloss media - 61cm (24in) x 30.5m (100ft) roll |
| C6783A |
Paper - Paper based semi-gloss media - 91.4cm (36in) x 30.5m (100ft) roll |
| C6785A |
Paper - Paper based semi-gloss media - 137.2cm (54in) x 30.5m (100ft) roll |
| C6786A |
Paper - Banner paper with Tyvek (140 gsm) - UV ink only - 61cm (24in) x 15.2m (50ft) roll |
| C6787A |
Paper - Media for HP Q1279A Banner paper with Tyvek (140 gsm) - UV ink only - 91.4cm (36in) x 15.2m (50ft) roll |
| C6789A |
Paper - Banner paper with Tyvek (140 gsm) - UV ink only - 91.4cm (36in) x 15.2m (50ft) roll |
| C7875A |
Paper - Paper (Backlit) for DesignJet 250C, DesignJet 2000, DesignJet 3000, DesignJet 3800 |
| C7922A |
Paper - Basic Bond paper - 106.7cm (42in) x 45.7m (150ft) roll |
| C7923A |
Paper - Basic heavyweight paper - 61cm (24in) x 30.5m (100ft) roll (USA and Asia/Pacific) |
| C7924A |
Paper - Basic Heavyweight Paper - 91.4cm (36in) x 30.5m (100ft) roll (USA and Asia/Pacific) |
| C7925A |
Paper - Basic Heavyweight Paper - 106.7cm (42in) x 30.5m (100ft) roll (USA and Asia/Pacific) |
| C7926A |
Paper - Basic Heavyweight Paper - 137.2cm (54in) x 30.5m (100ft) roll (USA and Asia/Pacific) |
| C7946A |
Paper - Paper (Matte) for DesignJet 2000, DesignJet 2500, DesignJet 3000, DesignJet 3500 |
| C7949A |
Paper - Outdoor billboard paper - The back of the paper is blue in color - 91.4cm (36in) x 30.5m (100ft) roll (USA) |
| C7950A |
Paper - Paper for DesignJet 5100 Series, DesignJet 3000, DesignJet 3800, DesignJet 5000 Series |
| C7952A |
Paper - Paper (Satin) for DesignJet 2000, DesignJet 2500, DesignJet 3000, DesignJet 3500 |
| C7953A |
Paper - Paper (Satin) for DesignJet 3000, DesignJet 3500, DesignJet 3800, DesignJet 5000 Series |
| C7960A |
Paper - Paper (Backlit) for DesignJet 2000, DesignJet 2500, DesignJet 3000, DesignJet 3500 |
| C7961A |
Paper - Paper for DesignJet 3800, DesignJet 3000, DesignJet 5100 Series, DesignJet 5000 Series |
| C8281A |
Paper - Basic coated paper - 61cm (24in) x 45.7m (150ft) roll (USA and Asia/Pacific) |
| C8310A |
Paper - Basic photo satin paper - 61cm (24in) x 30.5m (100ft) roll (USA and Asia/Pacific) |
| C8311A |
Paper - Basic photo satin paper - 91.4cm (36in) x 30.5m (100ft) roll (USA and Asia/Pacific) |
| C8312A |
Paper - Paper (Photo) for DesignJet 3000, DesignJet 3500, DesignJet 3800, DesignJet 5000 Series |
| C8313A |
Paper - Paper (Photo) for DesignJet 3000, DesignJet 3500, DesignJet 3800, DesignJet 5000 Series |
| C8315A |
Paper - High gloss photo paper - 61cm (24in) x 30.5m (100ft) roll (USA and Asia/Pacific) |
| C8316A |
Paper - High gloss photo paper - 91.4cm (36in) x 30.5m (100ft) roll (USA and Asia/Pacific) |
| C8317A |
Paper - Paper (Photo) for DesignJet 3000, DesignJet 3500, DesignJet 3800, DesignJet 5000 Series |
| C8318A |
Paper - Paper (Photo) for DesignJet 3000, DesignJet 3500, DesignJet 3800, DesignJet 5000 Series |
| Q1396A |
Paper - Paper for DesignJet 1055 Series, DesignJet 800 Series, DesignJet 130 Series, DesignJet 500. Bond Paper - 24 inch x 150. |
| Q1397A |
Paper - Universal Bond Paper - 91.4cm (36in) x 30.5m (100ft) roll |
| Q1398A |
Paper - Hewlett Packard Supplies HP paper - bond paper - Roll (42 in x 150 ft) - 80 g/m2 |
| Q1412A |
Paper - Paper (Coated) for DesignJet 2000, DesignJet 3000, DesignJet 1050 Series, DesignJet 1055 Series |
| Q1413A |
Paper - Paper (Coated) for DesignJet 2000, DesignJet 3000, DesignJet 1050 Series, DesignJet 1055 Series |
| Q1416A |
Paper - Paper (Coated) for DesignJet 2000, DesignJet 3000, DesignJet 1050 Series, DesignJet 1055 Series |
| Q1419A |
Paper - Paper (Coated) for DesignJet 2000, DesignJet 3000, DesignJet 1050 Series, DesignJet 1055 Series |
| Q1420A |
Paper - Paper (Photo) for Designjet 820 MFP Series, DesignJet T1100 T160 printer series, DesignJet 2000, DesignJet 3000 |
| Q1426A |
Paper - Hewlett Packard Supplies HP paper - high-gloss photo paper - Roll A1 (24 in x 100 ft) - 179 g/m2 |
| Q1432A |
Paper - Yupo Synthetic Paper - 91.4cm (36in) x 30.5m (100ft) roll |
| Q1434A |
Paper - Yupo Synthetic Paper - 137.2cm (54in) x 30.5m (100ft) roll |
| Q1435A |
Paper - Paper (Fabric) for DesignJet 5000 Series, DesignJet 800 Series, DesignJet 500, DesignJet 2000 |
| Q1437A |
Paper - Paper (Fabric) for DesignJet 3800, DesignJet 3000, DesignJet 5000 Series |
| Q1736A |
Paper - Paper (Matte) for DesignJet 2000, DesignJet 2500, DesignJet 3000, DesignJet 3500 |
| Q1739A |
Paper - Heat Transfer Paper - 91.4cm (36in) x 30.5m (100ft) roll (USA) |
| Q1740A |
Paper - Heat Transfer Paper - 137.2cm (54in) x 30.5m (100ft) roll (USA) |
| Q1746A |
Paper - Paper Backed Fabric Polyester - 137.2cm (54in) x 10.1m (33ft) roll (USA) |
| Q1898A |
Paper - Paper (Banner) for DesignJet 2000, DesignJet 3000, DesignJet 3800, DesignJet 5000 Series |
| Q1899A |
Paper - Scrim Banner paper - 106.7cm (42in) x 15.2m (50ft) roll |
| Q1901A |
Paper - Paper (Banner) for DesignJet 3000, DesignJet 3800, DesignJet 5000 Series, DesignJet 500 |
| Q1904A |
Paper - Paper (Matte) for DesignJet 2000, DesignJet 3000, DesignJet 1050 Series, DesignJet 1055 Series |
| Q1906A |
Paper - Paper (Matte) for DesignJet 2000, DesignJet 3000, DesignJet 1050 Series, DesignJet 1055 Series |
| Q1907A |
Paper - Paper (Matte) for DesignJet 2000, DesignJet 3000, DesignJet 1050 Series, DesignJet 1055 Series |
| C4704-60009 |
PC Board - Refill interconnect board |
| J2555-69013 |
PC Board - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors |
| J4100-69001 |
PC Board - JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors |
| J2552B |
PC Board Interface - LAN and LocalTalk interface - Has EtherTwist (10Base-T) , ThinLAN (10Base-2) , and LocalTalk (DIN-8) connectors |
| J2555B |
PC Board Interface - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors |
| J2590A |
PC Board Interface - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors |
| J2591-69001 |
PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors |
| J2591A |
PC Board Interface - External JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors |
| J2594-69001 |
PC Board Interface - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors |
| J3264A |
PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN |
| J3265-69001 |
PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors |
| J3265G |
PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
| J4100A |
PC Board Interface - JetDirect 400N modular input/output (MIO) - Internal print server - Provides 10/100Base-T or 10Base-2 network connection using RJ45 or BNC connectors |
| C4723-60247 |
Pinch Assembly - Pincharm assembly - Curved black plastic plate with four small rubber rollers - Does NOT include spring or bushing |
| C4723-60246 |
Platen - Entry platen assembly - Curved cover/guide that is next to the paper drive (platen) roller |
| 8120-0698 |
Power Cord - Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in the USA and Canada) |
| 8120-1378 |
Power Cord - Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam) |
| 8121-0877 |
Power Cord - Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in the USA and Canada) |
| J2372-60001 |
Print Server - LAN Interface Board with EtherTwist (10Base-T) and ThinLAN |
| J2554-61015 |
Print Server - LAN and LocalTalk Interface - EtherTwist (10Base-T), ThinLAN |
| J2555-61016 |
Print Server - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors |
| J2591-61011 |
Print Server - External JetDirect LAN Interface Module with EtherTwist |
| J2593-61011 |
Print Server - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) input connectors and three parallel (DB-25) output connectors w/power supply. |
| J3265A |
Print Server - External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
| J4100-61001 |
Print Server - JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors |
| C4704-60020 |
Pulley - Idler pulley - For carriage (Y-axis) belt - On right end of plotter |
| C4723-60249 |
Refill Assembly - Refill assembly - Mounted inside the left hand cover - Includes motor and gears |
| C6084A-Repair_DesignJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| C6084-60002 |
RIP Server - Raster Image Processor (RIP) server assembly - External unit used to improve print speed and provide networking for a DesignJet large format printer - Kanji version for Japan |
| C6084-69001 |
RIP Server - Raster Image Processor (RIP) server assembly - External unit used to improve print speed and provide networking for a DesignJet large format printer - Not for Japan |
| C6084-69002 |
RIP Server - Raster Image Processor (RIP) server assembly - External unit used to improve print speed and provide networking for a DesignJet large format printer - Kanji version for Japan |
| C4723-60242 |
Roller - Paper drive (platen) roller assembly - Long gear driven roller |
| C4704-60199 |
Rollfeed Assembly - Brake/housing assembly (on right side) - Accepts the flange end of the spindle rod assembly - Includes the 2 housing pieces, 2 brake shoes, brake gear, brake lever, and springs |
| 0460-2536 |
Saddle - Edge wire saddle for Y-axis bracket |
| C4704-60029 |
Sensor - Right end cover and window closed sensors - Includes cable and connector |
| C4704-60052 |
Sensor - Pincharm sensor |
| C4704-60058 |
Sensor - Left end cover sensor - Includes cable and connector |
| C4704-60195 |
Sensor - Media sensor assembly |
| C4723-60071 |
Sensor - Take-up reel sensor assembly |
| C4723-60096 |
Sensor - Carriage assembly - Includes carriage assembly, line sensor, encoder, rear bushing, calibration pen, digitizing sight, guages - Trailing cable and cable clamp not included |
| C4723-69071 |
Sensor - Take-up reel sensor assembly |
| C4723-69096 |
Sensor - Carriage assembly - Includes carriage assembly, line sensor, encoder, rear bushing, calibration pen, digitizing sight, guages - Trailing cable and cable clamp not included |
| C6084A-Manual_DesignJet |
Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. |
| C7769-90066 |
Service Manual - DesignJet support DVD-ROM - Version A.04.01 - Has product information, user's manuals, service manuals, diagnostic software, test drawings, newsletters, and service notes |
| 0624-0795 |
Service Parts - Screw Filter |
| C4955-80013 |
Service Parts - Printhead/Cleaner Light Magent |
| C6029B |
Service Parts - Heavyweight coated paper - 61cm (24in) x 30.5m (100ft) roll (Europe, Asia/Pacific, and Japan) |
| C7886A |
Service Parts - LF Proofing Gloss |
| Q1254-60025 |
Service Parts - English/korean for HP 32054F |
| Q1745A |
Service Parts - Paper Backed Fabric Polyester - 91.4cm (36in) x 10.1m (33ft) roll (USA) |
| Q1748A |
Service Parts - Paper Backed Fabric Silk Satin - 91.4cm (36in) x 10.1m (33ft) roll (USA) |
| C4723-60276 |
Service Station - Service station assembly for Hewlett Packard Designjet Plotters. |
| C4723-60240 |
Shaft - Pincharm shaft assembly - Includes cam journals mounted on each end |
| C6071-60368 |
Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Japanese) |
| C6072-60284 |
Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (German) |
| C6072-60285 |
Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (French) |
| C6072-60286 |
Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (Spanish) |
| C6072-60287 |
Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (Italian) |
| C6072-60304 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (German) |
| C6072-60305 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (French) |
| C6072-60306 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Spanish) |
| C6072-60307 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Italian) |
| C7779-60040 |
Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Chinese) |
| C7779-60042 |
Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Korean) |
| C7779-60043 |
Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Taiwanese) |
| C7779-60044 |
Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (German) |
| C7779-60045 |
Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (French) |
| C7779-60046 |
Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Spanish) |
| C7779-60047 |
Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Italian) |
| C4723-60064 |
Spindle - Take-up reel spindle assembly |
| C4723-60241 |
Spindle - Rollfeed spindle rod assembly - Includes flange and core spindle spacer |
| C6248A |
Spindle - Rollfeed spindle rod assembly for DesignJet 3000/3500CP - Includes flange and core spindle spacer |
| C1633-80005 |
Spring - Compression spring - Installed between pincharm assembly and bushing |
| C1633-80014 |
Spring - Compression spring - For the rear bushing on the carriage |
| C4699-00016 |
Spring - Encoder spring for HP DesignJet 510ps |
| C4704-80009 |
Spring - Service station spring |
| C4723-80021 |
Spring - Extension spring - Holds the rollfeed access cover closed |
| C4704-60143 |
Starwheel - Big starwheel mount assembly - Includes cover, body, spring and two starwheels |
| C4713-60035 |
Starwheel - Starwheel mount assembly - Includes cover, body, spring and two starwheels |
| C6236A |
Storage System - DesignJet CP ink system storage container - Holds printheads and printhead cleaners when not in use |
| C4723-60232 |
Strip - Encoder strip - Used to determine carriage position 54inch. |
| C4704-40026 |
Support - Roller support bracket |
| C4723-60072 |
Support - Take-up reel left hand support assembly |
| C4723-60290 |
Support - Electronics support frame and cover supports - Includes the support located above the refill interconnect cable and the two supports used to mount the rear cover |
| C6246-60009 |
Support - Take-up reel support assembly |
| C4704-60056 |
Switch - Power switch - Includes cable |
| C4704-60261 |
Switch - Stand-by switch asembly |
| C4723-60017 |
Switch - Media load switch assembly |
| C4723-60063 |
Tensioner - Y-axis tensioner assembly - Applies tension to carriage belt - Includes wedge, tensioner spring, and housing |
| C4723-60084 |
Tray - Plotter stand tray assembly |
| C4704-60113 |
Trim - Right trim assembly - At right of entry platen |
| C4723-60111 |
Trim - Left trim assembly - At left of entry platen |
| C4723-60060 |
Tube - Media weight and core kit for the take-up reel |
| C6775A |
Vinyl Adhesive - Colorfast adhesive vinyl (328 gsm) - 91.4cm (36in) x 12.2m (40ft) roll - For regular ink or UV-resistant ink |
| C6777A |
Vinyl Adhesive - Colorfast adhesive vinyl (328 gsm) - 137.2cm (54in) x 12.2m (40ft) roll - For regular ink or UV-resistant ink |
| C4723-60236 |
Window - Lift-up viewing window |
Techical Help
View service parts