| C4723-60238 |
Adjuster - Adjustment kit - Includes instructions, empty cartridge, digitizing sight (magnifier) and gauge |
| C4704-60329 |
Bail - Bail assembly - Mounting strip assembly for the starwheel mount assemblies (Not included) - Extends width of plotter |
| 1410-0708 |
Bearing - Sleeve bearing - Used on left end of overdrive assembly |
| C4704-60207 |
Belt - Carriage (Y-axis) belt - Drives the carriage assembly for 36 inch size plotters. (54 inch size order C4723-60235) |
| C4704-00005 |
Bracket - Y-axis motor bracket - Includes edge wire saddle - Holds the Y-Axis motor |
| C1633-40082 |
Bushing - Pincharm spring retaining bushing |
| C3195-40076 |
Bushing - Cutter bushing - Connects cutter assembly to slider rod |
| C4704-40084 |
Bushing - Rear slider rod bushing - Spring loaded |
| 5063-1256 |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| 5063-1257 |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| 92215S |
Cable - RS-422 serial cable - 8-pin (M) to 8-pin (M) - 2.0m (6.6ft) long |
| C2950A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| C2951A |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| C2990A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long |
| C2991A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long |
| C4704-60015 |
Cable - Carriage board trailing cable with ferrite - Three ribbon cables bundled together - 1.9m (6.3ft) long, 36 inches. |
| C4704-60024 |
Cable - Ribbon cable assembly - Has 28-pin (F) connectors - 23.5cm (9.3in) long |
| C4704-60025 |
Cable - Ribbon cable assembly with ferrite - Has 28-pin (F) connectors - 1.3m (4.1ft) long |
| C3180-40020 |
Cam - Pinch arm cam - Attached to pinch arm (Media) lever |
| C3190-60149 |
Cam - Left cam journal - Mounted on left end of pinch arm shaft |
| C6771A |
Canvas - Studio canvas (368 gsm) - 91.4cm (36in) x 10.7m (35ft) roll - For regular ink or UV resistant ink |
| C7966A |
Canvas - Canvas with matte finish - 61cm (24in) x 10.7m (35ft) roll (USA) |
| C7967A |
Canvas - Canvas with matte finish - 91.4cm (36in) x 10.7m (35ft) roll (USA) |
| C2858-40043 |
Cap - Spindle end cap - Small core spacer - Removes for loading the media roll. Please order spindle assembly. |
| 5183-5283 |
Cartridge - Return kit (Box and instructions) - For returning defective large format printer ink systems covered under CREW program |
| C1806A |
Cartridge - Black ink system - Includes print head, print head cleaner and ink cartridge |
| C1807A |
Cartridge - Cyan ink system - Includes print head, print head cleaner and ink cartridge |
| C1808A |
Cartridge - Magenta ink system - Includes print head, print head cleaner and ink cartridge |
| C1809A |
Cartridge - Yellow ink system - Includes print head, print head cleaner and ink cartridge |
| C1892A |
Cartridge - Black UV ink system - Includes print head, print head cleaner and ink cartridge |
| C1893A |
Cartridge - Cyan UV ink system - Includes print head, print head cleaner and ink cartridge |
| C1894A |
Cartridge - Magenta UV ink system - Includes print head, print head cleaner and ink cartridge |
| C1895A |
Cartridge - Yellow UV ink system - Includes print head, print head cleaner and ink cartridge |
| C4704-40085 |
Clamp - Trailing cable clamp - Secures the trailing cable to the carriage assembly |
| C4723-40086 |
Clamp - Trailing cable holder |
| C6247A |
Cleaner - DesignJet cleaning kit - Includes cleaning solution and 20 cleaning rags |
| C4704-00004 |
Cover - Modular Input/Output (MIO) cover - Mounts on top of electronics module |
| C4704-00021 |
Cover - Top cover for HP DesignJet 2000CP |
| C4704-00033 |
Cover - SIMM slot cover |
| C4704-40057 |
Cover - Electronics module left cover - Louvered cover on rear of plotter |
| C4704-40058 |
Cover - Electronics module right cover - Mounts on rear of plotter |
| C4704-40080 |
Cover - Encoder strip roof |
| C4704-60117 |
Cover - One Line sensor lens cover for carriage - Mounts to carriage assembly for HP Designjet Plotters. |
| C4704-60274 |
Cover - Electronics module cover - Mounts to rear of plotter - Includes SIMM cover |
| C4704-60312 |
Cover - Rollfeed access cover - Opens forward to allow access to paper spindle assembly |
| C4723-60115 |
Cover - Right end cover - Has cut outs for the control panel |
| C4723-60116 |
Cover - Left end cover for HP DesignJet 2000CP |
| C4704-60077 |
Cross Brace - Cross-brace (E-size) - Brace that connects and supports the two stand legs |
| C4704-60299 |
Cutter - Cutter assembly - Auto cutter for rollfeed paper - Only for serial prefix ESA and ESB |
| C4723-60244 |
Cutter - Cutter assembly - Auto cutter for rollfeed paper |
| C4704-60033 |
Elevator - Elevator platform assembly - Raises and lowers ink cartridges to fill the print heads - Located on left side of plotter |
| C4704-60067 |
Enclosure - Cutter enclosure - Mounted above entry platen |
| 9170-1687 |
Ferrite Assembly - Ferrite core - Installed on Y-AXIS motor cable |
| C6794A |
Film - Durable Imaging glossy UV media - For UV ink only - 91.4cm (36in) x 30.5m (100ft) roll |
| C7955A |
Film - Film (Opaque) for DesignJet 2800, DesignJet 3800, DesignJet 3000, DesignJet 5000 Series |
| C7956A |
Film - Film (Opaque) for DesignJet 5000 Series, DesignJet 800 Series, DesignJet 1055 Series, DesignJet 500 |
| C4723-60294 |
Firmware - Firmware SIMM kit (Revision A.04.08) - Mounts in the electronics module - NOTE: this is not a postscript SIMM |
| C4723-69294 |
Firmware - Firmware SIMM kit (Revision A.04.08) - Mounts in the electronics module - NOTE: this is not a postscript SIMM |
| C4704-40007 |
Flag - Service station flag - Spring loaded flag on right side of service station |
| C4704-60086 |
Foot - Foot assembly with casters (one assembly per part number)- foot assembly mounts to the bottom of the plotter stand legs, plotter requires two. |
| C4704-60255 |
Front Panel - Front (Control) panel and cable assembly for HP Designjet Plotter. Only control panel may not include overlay plastic face. |
| C1633-40019 |
Gear - Overdrive gear cluster |
| C1633-60030 |
Gear - Clutch / overdrive gear assembly - Includes gear, clutch, retaining clip, and two washers. |
| C4705-60089 |
Gear Assembly - Clutch / overdrive gear assembly - Includes gear, clutch, retaining clip, and two washers |
| C4704-00016 |
Ground - Encoder ground strap - Provides ground to end of encoder strip |
| C4704-00035 |
Ground - Ground strap - Attached to Y-AXIS bracket |
| C4704-60295 |
Guard - Starguard starwheel cover assembly |
| C4704-60218 |
Holder - Quick reference holder pocket - Holds quick reference guides and media knife - Mounted on rear of right end cover |
| C4704-60082 |
Housing - Housing assembly (on left side) |
| C4703-60041 |
Kit - DesignJet 2000CP/2800CP manual kit - Includes user`s guide, setup guide, quick reference guide, and assembly instructions (English) |
| C4703-60042 |
Kit - DesignJet 2000CP/2800CP manual kit - Includes user's guide, setup guide, and assembly instructions (Korean) |
| C4703-60043 |
Kit - DesignJet 2000CP/2800CP manual kit - Includes user's guide, setup guide, and assembly instructions (Traditional Chinese) |
| C4703-60049 |
Kit - DesignJet 2000CP/2800CP manual kit - Includes user's guide, setup guide, and assembly instructions (Portuguese) |
| C4703-60050 |
Kit - DesignJet 2000CP/2800CP manual kit - Includes user's guide, setup guide, and assembly instructions (Simplified Chinese) |
| C4704-60095 |
Kit - Hardware kit for printer stand - Includes screwdriver, screws, washers, and media bin retaining clips |
| C4704-60304 |
Kit - DesignJet 2000CP/2500CP/2800CP manual kit - Includes user's guide, setup guide, and assembly instructions (German) |
| C4704-60305 |
Kit - DesignJet 2000CP/2500CP/2800CP manual kit - Includes user's guide, setup guide, and assembly instructions (French) |
| C4704-60306 |
Kit - DesignJet 2000CP/2500CP/2800CP manual kit - Includes user's guide, setup guide, and assembly instructions (Spanish) |
| C4704-60307 |
Kit - DesignJet 2000CP/2500CP/2800CP manual kit - Includes user's guide, setup guide, and assembly instructions (Italian) |
| C4704-60338 |
Kit - DesignJet 2000CP/2500CP/2800CP manual kit - Includes user's guide, setup guide, and assembly instructions (Japanese) |
| C4704-60075 |
Leg - Leg assembly - Side support for the plotter - Does NOT include the foot assembly |
| C4704-40059 |
Lever - Pinch arm (media) lever - Used when loading paper |
| C4704-00025 |
Link - Front wire link |
| 6040-0855 |
Lubricant - SYNTHETIC OIL (4oz Plastic Bottle) Front and Rear Slider Rods Synthetic oil - One plastic bottle of 3.5oz / 118.29 ML |
| 6040-0858 |
Lubricant - Lubricant : Special lubricating oil - For carriage slider rod surface - 4oz (113g) plastic bottle of synthetic oil |
| 6040-0911 |
Lubricant - Special lubricating oil - For carriage slider rod surface - (syringe with 35cc oil) |
| C3190-60155 |
Lubricant - Grease - GREASE APPLICATION KITGrease - For helical gear (Drive roller gear) |
| C4723-60141 |
Maintenance Kit - Preventive maintenance kit - Contains Carriage Assembly, line sensor cover, encoder strip, Y-AXIS pulley, belt, motor, cutter, silicon grease, plastic surface cleaner, synthetic oil and wipes (on check out notes let us know if 36inch or 54inch plotter.) |
| 5959-9733 |
Manual - Manual for Designjet 820 MFP Series, DesignJet-C1633A, DesignJet 600, DesignJet 650 |
| 5959-9734 |
Manual - Manual for DesignJet 2000, DesignJet 2500, DesignJet 430, DesignJet 450 |
| C6072-60281 |
Manual - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (English) |
| C6072-60301 |
Manual - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (English) |
| C7779-60041 |
Manual - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (English) |
| C4704-60073 |
Media Bin - Media bin arm (Loop assembly) |
| C4713-60147 |
Media Bin - Media bin arm (Loop assembly) |
| 1818-6171 |
Memory - 4MB EDO (Extended Data Output) DRAM SIMM memory module |
| 1818-6172 |
Memory - 8MB EDO (Extended Data Output) DRAM SIMM memory module |
| C4723-60264 |
Memory - 16MB, 60nS EDO (Extended Data Output) DRAM SIMM memory module |
| C6229A |
Memory - 4MB SIMM memory module - For DesignJet CP printer |
| C6230A |
Memory - 8MB SIMM memory module - For DesignJet CP printer |
| C6231A |
Memory - 16MB SIMM memory module - For DesignJet 400, 700, CP series printers |
| C6232A |
Memory - 32MB SIMM memory module upgrade - For DesignJet 400, 700, CP series printers |
| C4723-60114 |
Module - Electronics module - Includes power supply, fan, and main board |
| C4723-69114 |
Module - Electronics module - Includes power supply, fan, and main board |
| J2590-61011 |
Module - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors |
| J2590-69001 |
Module - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors |
| J2593-69001 |
Module - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) input connectors and three parallel (DB-25) output connectors w/power supply. |
| J2594-61011 |
Module - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors |
| C4704-60040 |
Motor - Bail motor for HP DesignJet 2500CP |
| C4723-60277 |
Motor - Carriage (Y-Axis) motor assembly - Drives carriage belt - Includes motor, motor holder, and cable |
| C4723-60303 |
Motor - X-axis motor assembly - Includes motor, belt, and worm gear -Order X-axis motor assembly kit |
| C4724-60053 |
Motor - X-Axis motor assembly kit - New design does not use a belt - Kit includes motor with attached worm gear, helical gear, motor mount, screws and nuts for mounting the parts. |
| C4724-69053 |
Motor - X-motor assembly. motor, belt, and worm gear. (same as c4724-60053) |
| C1633-40089 |
Mount - Overdrive mount block |
| C4704-60213 |
Overdrive Assembly - Overdrive assembly - Includes overdrive shims, clutch and overdrive gear |
| C4704-60281 |
Overdrive Assembly - Overdrive assembly (B) - Includes overdrive shims, clutch and overdrive gear |
| C4704-60101 |
Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (English) |
| C4704-60102 |
Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (Korean) |
| C4704-60103 |
Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (Taiwanese) |
| C4704-60104 |
Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (German) |
| C4704-60105 |
Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (French) |
| C4704-60106 |
Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (Spanish) |
| C4704-60107 |
Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (Italian) |
| C4704-60108 |
Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (Japanese) |
| C4704-60109 |
Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (Portuguese) |
| C4704-60110 |
Overlay - Front panel overlay - Shows the function of the front panel buttons and indicator lights (Chinese) |
| C6019B |
Paper - Coated paper (98 gsm) - 61cm (24in) x 45.7m (150ft) roll (USA, Canada, and Latin America) |
| C6020B |
Paper - Coated paper (98 gsm) - 91.4cm (36in) x 45.7m (150ft) roll (USA, Canada, and Latin America) |
| C6021B |
Paper - Heavyweight coated paper - 61cm (24in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
| C6022B |
Paper - Heavyweight coated paper - 91.4cm (36in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
| C6023A |
Paper - Semi-gloss photo paper - 61cm (24in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
| C6024A |
Paper - Semi-gloss photo paper - 91.4cm (36in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
| C6025A |
Paper - High gloss photo paper - 61cm (24in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
| C6026A |
Paper - High gloss photo paper - 91.4cm (36in) x 30.5m (100ft) roll (USA, Canada, and Latin America) |
| C6029C |
Paper - Heavyweight coated paper - 61cm (24in) x 30.5m (100ft) roll - For regular or UV resistant ink |
| C6030C |
Paper - Heavyweight coated paper - 91.4cm (36in) x 30.5m (100ft) roll - For regular or UV resistant ink |
| C6778A |
Paper - Colorlucent backlit UV paper - 91.4cm (36in) x 30.5m (100ft) roll - For UV (pigmented) inks ONLY |
| C6782A |
Paper - Paper based semi-gloss media - 61cm (24in) x 30.5m (100ft) roll |
| C6783A |
Paper - Paper based semi-gloss media - 91.4cm (36in) x 30.5m (100ft) roll |
| C6786A |
Paper - Banner paper with Tyvek (140 gsm) - UV ink only - 61cm (24in) x 15.2m (50ft) roll |
| C6787A |
Paper - Media for HP Q1279A Banner paper with Tyvek (140 gsm) - UV ink only - 91.4cm (36in) x 15.2m (50ft) roll |
| C7923A |
Paper - Basic heavyweight paper - 61cm (24in) x 30.5m (100ft) roll (USA and Asia/Pacific) |
| C7924A |
Paper - Basic Heavyweight Paper - 91.4cm (36in) x 30.5m (100ft) roll (USA and Asia/Pacific) |
| C7949A |
Paper - Outdoor billboard paper - The back of the paper is blue in color - 91.4cm (36in) x 30.5m (100ft) roll (USA) |
| C7952A |
Paper - Paper (Satin) for DesignJet 2000, DesignJet 2500, DesignJet 3000, DesignJet 3500 |
| C7960A |
Paper - Paper (Backlit) for DesignJet 2000, DesignJet 2500, DesignJet 3000, DesignJet 3500 |
| C8310A |
Paper - Basic photo satin paper - 61cm (24in) x 30.5m (100ft) roll (USA and Asia/Pacific) |
| C8311A |
Paper - Basic photo satin paper - 91.4cm (36in) x 30.5m (100ft) roll (USA and Asia/Pacific) |
| C8315A |
Paper - High gloss photo paper - 61cm (24in) x 30.5m (100ft) roll (USA and Asia/Pacific) |
| C8316A |
Paper - High gloss photo paper - 91.4cm (36in) x 30.5m (100ft) roll (USA and Asia/Pacific) |
| Q1739A |
Paper - Heat Transfer Paper - 91.4cm (36in) x 30.5m (100ft) roll (USA) |
| C4704-60009 |
PC Board - Refill interconnect board |
| J2555-69013 |
PC Board - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors |
| J4100-69001 |
PC Board - JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors |
| J2552B |
PC Board Interface - LAN and LocalTalk interface - Has EtherTwist (10Base-T) , ThinLAN (10Base-2) , and LocalTalk (DIN-8) connectors |
| J2555B |
PC Board Interface - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors |
| J2590A |
PC Board Interface - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors |
| J2591-69001 |
PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors |
| J2591A |
PC Board Interface - External JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors |
| J2594-69001 |
PC Board Interface - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors |
| J3264A |
PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN |
| J3265-69001 |
PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors |
| J3265G |
PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
| C4723-60247 |
Pinch Assembly - Pincharm assembly - Curved black plastic plate with four small rubber rollers - Does NOT include spring or bushing |
| C4704-60294 |
Platen - Entry platen assembly - Cover/guide that is next to the paper drive (platen) roller |
| 8120-0698 |
Power Cord - Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in the USA and Canada) |
| 8120-1378 |
Power Cord - Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam) |
| 8121-0877 |
Power Cord - Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in the USA and Canada) |
| J2337-60001 |
Print Server - LAN Interface Board with EtherTwist (10Base-T) and ThinLAN |
| J2372-60001 |
Print Server - LAN Interface Board with EtherTwist (10Base-T) and ThinLAN |
| J2554-61015 |
Print Server - LAN and LocalTalk Interface - EtherTwist (10Base-T), ThinLAN |
| J2555-61016 |
Print Server - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors |
| J2591-61011 |
Print Server - External JetDirect LAN Interface Module with EtherTwist |
| J2593-61011 |
Print Server - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) input connectors and three parallel (DB-25) output connectors w/power supply. |
| J3265A |
Print Server - External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
| J4100-61001 |
Print Server - JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors |
| C4704-60020 |
Pulley - Idler pulley - For carriage (Y-axis) belt - On right end of plotter |
| C4723-60249 |
Refill Assembly - Refill assembly - Mounted inside the left hand cover - Includes motor and gears |
| C6085A-Repair_DesignJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| C6084-60002 |
RIP Server - Raster Image Processor (RIP) server assembly - External unit used to improve print speed and provide networking for a DesignJet large format printer - Kanji version for Japan |
| C6084-69001 |
RIP Server - Raster Image Processor (RIP) server assembly - External unit used to improve print speed and provide networking for a DesignJet large format printer - Not for Japan |
| C6084-69002 |
RIP Server - Raster Image Processor (RIP) server assembly - External unit used to improve print speed and provide networking for a DesignJet large format printer - Kanji version for Japan |
| C4700-60042 |
Roller - Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder |
| C4704-60199 |
Rollfeed Assembly - Brake/housing assembly (on right side) - Accepts the flange end of the spindle rod assembly - Includes the 2 housing pieces, 2 brake shoes, brake gear, brake lever, and springs |
| 0460-2536 |
Saddle - Edge wire saddle for Y-axis bracket |
| C4704-60029 |
Sensor - Right end cover and window closed sensors - Includes cable and connector |
| C4704-60052 |
Sensor - Pincharm sensor |
| C4704-60058 |
Sensor - Left end cover sensor - Includes cable and connector |
| C4704-60195 |
Sensor - Media sensor assembly |
| C4723-60071 |
Sensor - Take-up reel sensor assembly |
| C4723-60096 |
Sensor - Carriage assembly - Includes carriage assembly, line sensor, encoder, rear bushing, calibration pen, digitizing sight, guages - Trailing cable and cable clamp not included |
| C4723-69071 |
Sensor - Take-up reel sensor assembly |
| C4723-69096 |
Sensor - Carriage assembly - Includes carriage assembly, line sensor, encoder, rear bushing, calibration pen, digitizing sight, guages - Trailing cable and cable clamp not included |
| C6085A-Manual_DesignJet |
Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. |
| C7769-90066 |
Service Manual - DesignJet support DVD-ROM - Version A.04.01 - Has product information, user's manuals, service manuals, diagnostic software, test drawings, newsletters, and service notes |
| 0624-0795 |
Service Parts - Screw Filter |
| C4955-80013 |
Service Parts - Printhead/Cleaner Light Magent |
| C6020A |
Service Parts - HP Coated Paper 36-inch x 150 ft 98 gsm |
| C6021A |
Service Parts - HP Heavyweight Coated 24-inch x 100 roll |
| C6022A |
Service Parts - HP Heavyweight Coated 36-inch x 100 roll |
| C7886A |
Service Parts - LF Proofing Gloss |
| Q1254-60025 |
Service Parts - English/korean for HP 32054F |
| Q1745A |
Service Parts - Paper Backed Fabric Polyester - 91.4cm (36in) x 10.1m (33ft) roll (USA) |
| Q1748A |
Service Parts - Paper Backed Fabric Silk Satin - 91.4cm (36in) x 10.1m (33ft) roll (USA) |
| C4723-60276 |
Service Station - Service station assembly for Hewlett Packard Designjet Plotters. |
| C2848-60032 |
Shaft - Pincharm shaft assembly - Includes cam journals mounted on each end |
| C6071-60368 |
Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Japanese) |
| C6072-60284 |
Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (German) |
| C6072-60285 |
Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (French) |
| C6072-60286 |
Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (Spanish) |
| C6072-60287 |
Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (Italian) |
| C6072-60304 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (German) |
| C6072-60305 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (French) |
| C6072-60306 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Spanish) |
| C6072-60307 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Italian) |
| C7779-60040 |
Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Chinese) |
| C7779-60042 |
Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Korean) |
| C7779-60043 |
Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Taiwanese) |
| C7779-60044 |
Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (German) |
| C7779-60045 |
Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (French) |
| C7779-60046 |
Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Spanish) |
| C7779-60047 |
Software - ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series (Italian) |
| C4704-60317 |
Spindle - Rollfeed spindle rod assembly - Includes flange and core spindle spacer |
| C6246-60010 |
Spindle - 36-inch take-up reel spindle assembly |
| C1633-80004 |
Spring - Extension spring - Holds the rollfeed access cover closed |
| C1633-80005 |
Spring - Compression spring - Installed between pincharm assembly and bushing |
| C1633-80014 |
Spring - Compression spring - For the rear bushing on the carriage |
| C4699-00016 |
Spring - Encoder spring for HP DesignJet 510ps |
| C4704-80009 |
Spring - Service station spring |
| C4704-60143 |
Starwheel - Big starwheel mount assembly - Includes cover, body, spring and two starwheels |
| C4713-60035 |
Starwheel - Starwheel mount assembly - Includes cover, body, spring and two starwheels |
| C6236A |
Storage System - DesignJet CP ink system storage container - Holds printheads and printhead cleaners when not in use |
| C4704-40070 |
Strip - Capping strips ( E-size) - Two strips that snap together on the ends of the bin arms |
| C4704-60224 |
Strip - Encoder strip - Used to determine carriage position, 36inch. |
| C4704-40026 |
Support - Roller support bracket |
| C4714-60147 |
Support - Media bin support (E-size) |
| C4723-60072 |
Support - Take-up reel left hand support assembly |
| C6246-60009 |
Support - Take-up reel support assembly |
| C4704-60056 |
Switch - Power switch - Includes cable |
| C4704-60261 |
Switch - Stand-by switch asembly |
| C6246A |
Take Up Assembly - Take-up reel kit for DesignJet 2000CP/2500CP - Includes take-up reel spindle assembly, left and right take-up reel supports, take-up reel sensor assembly, empty core tubes, and media weight tubes |
| C4723-60063 |
Tensioner - Y-axis tensioner assembly - Applies tension to carriage belt - Includes wedge, tensioner spring, and housing |
| C4704-60084 |
Tray - Plotter stand tray assembly |
| C4704-60113 |
Trim - Right trim assembly - At right of entry platen |
| C4723-60111 |
Trim - Left trim assembly - At left of entry platen |
| C6246-60011 |
Tube - Media weight and core kit for the take-up reel |
| C6775A |
Vinyl Adhesive - Colorfast adhesive vinyl (328 gsm) - 91.4cm (36in) x 12.2m (40ft) roll - For regular ink or UV-resistant ink |
| C4704-60087 |
Window - Lift-up viewing window |
Techical Help
View service parts