C5870-80007 |
Absorber - Spittoon sponge - Absorbs excess ink from cartridges |
C6414N-Absorber |
Absorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters. |
C6414N-AC_Adapter |
AC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached. |
C6414N-Actuator |
Actuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm). |
C6409-40021 |
Adjuster - Carriage rod adjuster - Used to support and align the carriage rod (2 used) - This item should be replaced only by trained, experienced service personnel |
C6414N-Arm_Delivery |
Arm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm |
C6414N-Arm_Door |
Arm Door - Carriage access door sensor arm |
C6414N-Arm_Pickup |
Arm Pick Up - Paper detection arm - for registration plate on picking up paper |
C6414N-Arm_Plate |
Arm Plate - Lever arm - used to lift the pressure plate lifter |
C6414N-Arm_Sensing |
Arm Sensing - Arm assembly senses paper in bottom tray |
C6414N-Arm_Tension |
Arm Tension - Tension arm - maintains tension on carriage belt |
C6409-00013 |
Backbone - BacKBone - Large metal item where the main logic PCA and the carriage drive motor are mounted - This item should be replaced only by trained, experienced service personnel |
C6414N-Battery |
Battery - Battery pack for hp printer |
C4557-40049 |
Belt - Carriage drive belt - Moves printhead side to side |
C6414N-Belt_Carriage |
Belt Carriage - Carriage belt - moves the carriage assembly across the carriage rod |
C6414N-Belt_Paper |
Belt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly. |
C6414N-Bezel |
Bezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel |
C2145-00037 |
Blade - ESD blade for HP DeskJet 870C Series |
C4557-40128 |
Brace - Left backbone brace - Provides support for backbone |
C4557-40130 |
Brace - Left wall brace - Provides support for left wall |
C5870-40020 |
Brace - Right backbone brace - Installed on right side of printer base to provide support for backbone |
C5870-00010 |
Bracket - Paper motor mounting bracket |
C6414N-Bracket_Left |
Bracket Left - Left bracket - carriage rod adjustment bracket (left) |
C6414N-Bracket_Right |
Bracket Right - Right bracket - carriage rod adjustment bracket (right) |
C6414N-Bracket_Tension |
Bracket Tension - Belt tension bracket - holds the carriage belt idler pulley |
5063-1256 |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
5063-1257 |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
C2951A |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
C2990A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long |
C2991A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long |
C4557-60022 |
Cable - Cable assembly - An 11-pin (F) connector to two 3-pin (F) connectors and a 7-pin (F) connector - 36.8cm (14.5in) long |
C4557-80075 |
Cable - Carriage assembly flex cable - 40.3cm (15.9in) long |
C5870-60140 |
Cable - Cable assembly - 12-pin (F) connector, 5-pin (F) connector, and 7-pin (F) connector - 43.9cm (17.3in) long |
C6414N-Cable_Carriage |
Cable Carriage - Cable assembly which connects the main logic board to the carriage motor |
C6414N-Cable_Interface |
Cable Interface - Parallel cable - connects from your printer to computer via your parallel port. |
C6414N-Cable_Mchnsm |
Cable Mechanism - Cable assembly which connects the main logic board to the print mechanism |
C6414N-Cable_Panel |
Cable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display. |
C6414N-Cable_USB |
Cable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing. |
C4557-40034 |
Cam - Drawer cam - Short, spring loaded lever attached to the base of the wing frame - Used to draw input tray into position |
C6409-40040 |
Cam - Pick cam - Controls pressure plate and lever |
C6414N-Cam |
Cam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position |
C6414N-Cap_Lifter |
Cap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place. |
C6409-40031 |
Carriage - Ink cartridge carriage |
C6409-60003 |
Carriage - Ink cartridge carriage assembly - This item should be replaced only by trained, experienced service personnel |
C6414N-Carriage_Assy |
Carriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider. |
C6414N-Carriage_Base |
Carriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base |
C6414N-Carriage_Belt |
Carriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting. |
C6414N-Carriage_Cable |
Carriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side). |
C6414N-Carriage_Latch |
Carriage Latch - A-arm latch - retains latch over the printheads on the carriage |
C6414N-Carriage_Latch_CVR |
Carriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle. |
C6414N-Carriage_Motor |
Carriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement. |
C6414N-Carriage_Only |
Carriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly). |
C6414N-Carriage_PC_BRD |
Carriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it. |
C6615AA |
Cartridge - HP Inkjet Cartridge 15 Black AP |
C6615AC |
Cartridge - HP Inkjet Cartridge 15 Black Can |
C6615AE |
Cartridge - HP Inkjet Cartridge 15 Black EUR) |
C6615AL |
Cartridge - HP Inkjet Cartridge 15 Black LAR) |
C6615AN |
Cartridge - No. 15 Black Ink Print Cartridge - 21 ml Ink (for USA) |
C6615DA |
Cartridge - No. 15 Black ink print cartridge - 25 ml ink (Asia Pacific) |
C6615DC |
Cartridge - HP 15 Black InkJet Cartridge Can |
C6615DE |
Cartridge - HP 15 Black InkJet Cartridge EUR |
C6615DL |
Cartridge - HP 15 Black InkJet Cartridge LAR |
C6615DN |
Cartridge - No. 15 Black ink print cartridge - 25 ml ink (USA) |
C6625AA |
Cartridge - No. 17 Tri-color ink print cartridge (Asia/Pacific) |
C6625AE |
Cartridge - No. 17 Tri-color ink print cartridge (Europe) |
C6625AL |
Cartridge - No. 17 Tri-color ink print cartridge (Latin America) |
C6625AN |
Cartridge - No. 17 Tri-color ink print cartridge (USA) |
C5870-00006 |
Channel - Width adjust channel |
C6414N-Chassis |
Chassis - Chassis assembly - the large plastic item that forms the base of the print mechanism |
C5870-00002 |
Clip - Service station ESD grounding clip |
C6414N-Clutch_Feed |
Clutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit. |
C6414N-Control_Panel |
Control Panel - Control panel assembly - control buttons and display on top front of the unit. |
C4557-60020 |
Cover - Left side case for HP DeskJet 700 Series |
C5870-40016 |
Cover - Service station bonnet - Top cover of the spittoon - Has cutout for pallet/link assembly |
C6409-60162 |
Cover - Right side case |
C6411-40008 |
Cover - Main logic PCA cover - Has cut outs for the USB interface socket, parallel interface socket, and power module socket |
C6414N-Cover_Back |
Cover Back - Back cover of printer, it is usually removed to clear paper jams. |
C6414N-Cover_Cartridge |
Cover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves. |
C6414N-Cover_Main |
Cover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off. |
C6414N-Deflector |
Deflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly |
C6414N-Display |
Display - Status led display (LCD display assembly). |
C4557-40026 |
Door - Output door - Separates output media from input media |
C4557-60076 |
Door - Rear cleanout door assembly - Paper jam cleanout door |
C5870-40045 |
Door - Top/front access door - Print cartridge access door - Solid door without a window opening |
C6458-60001 |
Door - Top/front access door assembly - Print cartridge access door with strawberry colored window - Includes installation instructions |
C6458-60002 |
Door - Top/front access door assembly - Print cartridge access door with strawberry colored window - Does not include installation instructions |
C6458A |
Door - Top/front access door assembly - Print cartridge access door with Strawberry colored window - Replaces the existing door |
C6459-60001 |
Door - Top/front access door assembly - Print cartridge access door with lime window - With installation instructions |
C6459-60002 |
Door - Top/front access door assembly - Print cartridge access door with lime colored window - Does not include installation instructions |
C6459A |
Door - Top/front access door assembly - Print cartridge access door with Lime colored window - Replaces the existing door |
C6460-60001 |
Door - Top/front access door assembly - Print cartridge access door with tangerine colored window - Includes installation instructions |
C6460-60002 |
Door - Top/front access door assembly - Print cartridge access door with tangerine window - Without installation instructions |
C6460A |
Door - Top/front access door assembly - Print cartridge access door with Tangerine colored window - Replaces the existing door |
C6461-60001 |
Door - Top/front access door assembly - Print cartridge access door with grape colored window - Includes installation instructions |
C6461-60002 |
Door - Top/front access door assembly - Print cartridge access door with grape colored window - Does not include installation instructions |
C6461A |
Door - Top/front access door assembly - Print cartridge access door with Grape colored window - Replaces the existing door |
C6462-60001 |
Door - Top/front access door assembly - Print cartridge access door with blueberry colored window - Includes installation instructions |
C6462-60002 |
Door - Top/front access door assembly - Print cartridge access door with blueberry colored window - Does not include installation instructions |
C6462A |
Door - Top/front access door assembly - Print cartridge access door with Blueberry colored window - Replaces the existing door |
C6414N-Door_Carriage |
Door Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open. |
C6414N-Door_Cartridge |
Door Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door. |
C6414N-Door_Rear |
Door Rear - Rear cleanout door assembly - rear paper jam clean out door assembly. |
C6414N-Drive_Assy |
Drive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring. |
C6414N-Duplexer |
Duplexer - Auto duplexer assembly - provides double sided printing capability |
C4557-80019 |
Encoder - Paper motor encoder disk |
C6414N-Encoder |
Encoder - Encoder spring - provides tension for encoder strip |
C6414N-Encoder_Disk |
Encoder Disk - Disk encoder - helps to provide position information of the paper |
C6414N-Encoder_Strip |
Encoder Strip - Encoder strip - carriage position sensor reference |
C6414N-Extender_Input |
Extender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths |
C6414N-Extender_Output |
Extender Output - Paper exit tray extension |
C6414N-Fan_PC_BRD |
Fan PC Board - Fan to cool power supply unit |
C6414N-Fan_Vaccum |
Fan Vaccum - Vacuum fan assembly |
C6414N-Feed_Rollers |
Feed Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk |
9170-1655 |
Ferrite Assembly - Ferrite core for HP OfficeJet K60 |
C3828A |
Film - Film (Transparency) for OfficeJet R65 Series, PhotoSmart P1000, PhotoSmart P1100, OfficeJet G55 Series Transparency Film 200 SHEETS. |
C3832A |
Film - Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package |
C3834A |
Film - Film (Transparency) for DeskJet 1600 Series, DeskJet 2000 Series, DeskJet 800 Series, DeskJet 600 Series |
C3835A |
Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series |
C3837A |
Film - Film (Glossy) for DeskJet 1600 Series, OfficeJet 700 Series, DeskJet 895, DeskJet 895 Series |
C6051A |
Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series |
C6053A |
Film - Film (Transparency) for Color InkJet cp1700 Series, DeskJet 1180 Series, DeskJet 9300 Series, DeskJet 1280 Series |
C5870-40024 |
Flag - OOPS flag - Media sensor - Mounts on the top right edge of the upper paper guide |
C6414N-Flag_Paper |
Flag Paper - OOPS flag - out of paper sensor |
C4557-40118 |
Foot - Rubber foot - Replacement rubber foot for the bottom of the printer (four used) |
C6414N-Formatter |
Formatter - Formatter board assembly, this board communicates with your computer device and has MAC port connector. |
C5870-40039 |
Frame - Wing frame - Chassis for in/out tray components |
C6414N-Front_Panel |
Front Panel - Front panel assembly - includes lcd and actuator buttons |
C4557-40007 |
Gear - Pick gear for HP Color Copier 170 |
C4557-40021 |
Gear - Feed roller idler gear |
C4557-40079 |
Gear - Transfer gear (double gear) |
C4557-40095 |
Gear - Encoder gear for HP Color Copier 260 |
C4557-40102 |
Gear - Feed roller cluster gear |
C5870-40017 |
Gear - Cluster gear (large gear) |
C6414N-Gear_Assy |
Gear Assembly - ADF gear assembly driven by ADF main motor |
C6414N-Gear_Cluster |
Gear Cluster - Cluster gear, large gear on service station |
C6414N-Gear_Double |
Gear Double - Transfer gear - has double gear attached on service station |
C6414N-Gear_Main |
Gear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller. |
C6414N-Gear_Station |
Gear Station - Gears on shaft of spittoon station |
C6414N-Glass_ADF_Window |
Glass ADF Window - Small glass piece used when scanning - copying - faxing with ADF feeder for this unit will ship Q5888-00002. |
C6414N-Glass_Assy |
Glass Assembly - Main top copier glass assembly. |
C4557-40020 |
Guide - Lower guide - Platform for seperator peg, spring and pad |
C4557-40121 |
Guide - Encoder disk guide |
C5870-40037 |
Guide - Length adjuster - Media input length adjuster |
C6409-40022 |
Guide - Upper paper guide - Guides media through paper path |
C6409-40030 |
Guide - Spring guide for HP DeskJet 880C Series |
C6409-40034 |
Guide - Left wall pusher - Pushes against left side of media to maintain correct edge alignment |
C6410-40005 |
Guide - Width adjust (Purple) - Holds media against right wall of input tray |
C6414N-Guide_Paper |
Guide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken |
C6409-80031 |
Holder - Right carriage restraint (holder) - Used to protect the carriage assembly from damage during shipment |
C6414N-Holder |
Holder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place. |
C6414N-Idler |
Idler - Scanner belt idler assembly - maintains scannter belt tension. |
C6414N-Ink_DLVRY |
Ink Delivery System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly |
C6414N-Ink_Supply_Station |
Ink Supply Station - Ink supply service station (iss) assembly |
C6049A |
Iron On Transfers - Iron-On Transfers for DeskJet 2500C Series, HP DeskJet D1400 Printer Series, DeskJet D24XX Series, DeskJet F4180 Series |
C6050A |
Iron On Transfers - Iron-On Transfers for OfficeJet K80 Series, OfficeJet 700 Series, OfficeJet T45 Series, OfficeJet T65 Series |
C6065A |
Iron On Transfers - Iron-On Transfers for DeskJet 6620 Series, OfficeJet V40 Series, PSC 2100 Series All in One, DeskJet 640 Series |
C4557-60009 |
Keypad - Keypad assembly |
C4557-40090 |
Knob - Rear cleanout door knob |
C4557-40042 |
Latch - Plastic latch (Y-shaped) |
C4557-60045 |
Latch - Cartridge latch (Black) - Holds black ink cartridge in place |
C4557-60046 |
Latch - Cartridge latch (Color) - Holds color ink cartridge in place |
C4557-00037 |
Lever - Pressure plate lever - Transfers upward pressure from the separator lifter to the kicker |
C5870-40022 |
Lever - Paper pusher - Small, spring loaded lever attached to pivot - Pushes against left side of paper to maintain right edge alignment |
C6411-40006 |
Lever - Banner lever - Used to choose either single sheet paper or continuous feed (Banner) paper |
C4557-40063 |
Lifter - Separator lifter - Used to lift the separator peg |
C6429-60025 |
Link - Kicker bar cam link (spring loaded) |
C6413-90023 |
Manual - Manual for DeskJet 880 Series, DeskJet 895 Series, DeskJet 895, DeskJet 800 Series |
C6419-90025 |
Manual - Manual for DeskJet 840 Series, DeskJet 843, DeskJet 841 Series, DeskJet 6620 Series |
C6419-90026 |
Manual - DeskJet users guide for Microsoft Windows (English, Danish, Estonian, Finnish, Lithuanian, Norwegian, and Swedish) |
C6419-90027 |
Manual - DeskJet users guide for Microsoft Windows (Croatian, Czechoslovakian, Hungarian, Polish, Rumanian, Slovakian, Slovenian, and Turkish) |
C6419-90028 |
Manual - Manual for DeskJet 841 Series, DeskJet 6620 Series, DeskJet 840 Series, DeskJet 843 |
C6419-90029 |
Manual - Manual for DeskJet 840 Series, DeskJet 843, DeskJet 841 Series, DeskJet 6620 Series |
C6419-90030 |
Manual - Manual for DeskJet 840 Series, DeskJet 843, DeskJet 841 Series, DeskJet 6620 Series |
C6419-90031 |
Manual - DeskJet users guide for Microsoft Windows (English, Simplified Chinese, Traditional Chinese, Korean, and Thai) |
C6419-90037 |
Manual - Manual for DeskJet 840 Series, DeskJet 843, DeskJet 841 Series, DeskJet 6620 Series |
C6419-90038 |
Manual - Manual for DeskJet 840 Series, DeskJet 843, DeskJet 841 Series, DeskJet 6620 Series |
J3264-69001 |
Module - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors |
C4557-60003 |
Motor - Carriage motor assembly (Includes pulley) |
C5870-60004 |
Motor - Service station motor assembly - Includes PC board and gear |
C6409-60004 |
Motor - Paper advance motor |
C6414N-Motor_Carriage |
Motor Carriage - Carriage motor - motor that drives the carriage assembly |
C6414N-MTR_Srvce_Station |
Motor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly |
C6414-40001 |
NamePlate - Nameplate - DeskJet 840C printer logo |
C6414-40002 |
NamePlate - Nameplate - DeskJet 842C printer logo |
C6414N-Overlay |
Overlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately. |
C4557-80027 |
Pad - Length adjust pad (Poron) - Mounted under the fine length adjuster |
C6426-60054 |
Pallet - Pallet/link assembly - Installed between spittoon and sled cap assembly - Mounting platform for the wiper and capping systems parts |
C4557-40098 |
Panel - Paper tray left inner panel (left cheek cap) - Mounts between left wing and left outer panel |
C4557-40099 |
Panel - Paper tray right inner panel (right cheek cap) - Mounts between right wing and right outer panel |
C5870-40019 |
Panel - Paper tray panel (right cheek) - Attaches to the right edge of the wing frame |
51634Y |
Paper - HP Premium Inkjet Paper - A size (8.5 x 11-inches) - 200 sheets |
51634Z |
Paper - InkJet non-glossy LX paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package |
C1812A |
Paper - Greeting card paper pack (White) - A size (8.5 x 11-inches) - Includes 20 sheets and 20 envelopes |
C1820A |
Paper - Banner paper - A size (8.5 x 11-inches), 24 lb, perforated for easy separation - 100 sheets total per pack (5 stacks of 20 continuous sheets) |
C1821A |
Paper - Banner paper - A4 size (21.0cm x 29.7cm), 24 lb, perforated for easy separation - 100 sheets total per pack (5 stacks of 20 continuous sheets) |
C1824A |
Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 500 sheets |
C1825A |
Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 500 sheets |
C1853A |
Paper - Premium InkJet Heavyweight Paper - A4 size (21.0cm x 29.7cm) - Coated on both sides - 100 sheets |
C5976A |
Paper - Bright white InkJet paper - A size (8.5 x 11-inches) - 200 sheets per package |
C5976B |
Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 250 sheets |
C5977A |
Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 200 sheets |
C5977B |
Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 250 sheets |
C6039A |
Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper |
C6042A |
Paper - Paper (Matte) for DeskJet D14XX Series, DeskJet D42XX Series, PhotoSmart 7350 Printer, PhotoSmart 7150 Printer |
C6043A |
Paper - Paper (Photo) for DeskJet 1100 Series, DeskJet 1120 Series, DeskJet 1220 Series, DeskJet 1200 Series |
C6044A |
Paper - HP Photo Greeting Cards (Glossy) - A size (8.5 x 11-inches) - 10 scored half-fold glossy cards and envelopes |
C6045A |
Paper - HP Photo Greeting Cards (Glossy) - A4 size (21.0cm x 29.7cm) - 10 scored half-fold glossy cards and envelopes |
C6055A |
Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper |
C6057A |
Paper - Paper (Photo) for DeskJet 2500C Series, DeskJet 2000 Series, DeskJet 700 Series, DeskJet 890 Series |
C6419-90009 |
Paper - DeskJet Setup Poster - For Apple Macintosh - Has instructions for USB cable setup (English) |
C6419-90021 |
Paper - DeskJet Setup Poster - For Microsoft Windows - Has instructions for both parallel and USB cable setup (English) |
C6587AN |
Paper - Printable Expressions all occasions card kit - Includes 20 greeting cards and envelopes, and a CD-ROM with 24 original pieces of art |
C6817A |
Paper - Brochure and flyer paper - Glossy on both sides - A size (8.5 x 11-inches), 98 brightness - 50 sheets |
C6955A |
Paper - Professional Brochure and Flyer Paper (Matte) - A size (8.5 x 11-inches) - 50 sheets |
Q7852A |
Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper |
C4557-40016 |
Paper Stacker - Kicker - Restacks paper in stack after top sheet is picked |
C6409-60200 |
PC Board - Paper encoder PCA - Controls operation of paper motor |
C6414N-PC_BRD |
PC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only |
C6414N-PC_BRD_DC |
PC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board. |
C6414N-PC_BRD_Interface |
PC Board Interface - Internal print server lan interface board - plugs into peripheral eio. usefull for networking and multiple users. |
J2591-69001 |
PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors |
J3265-69001 |
PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors |
C5870-40029 |
Pin - Separator peg for HP DeskJet 895C |
C6414N-Pinchwheel |
Pinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs |
C4557-40014 |
Plate - Back Plate - Holds Latch Spring, Knob and Latch Components of Rear Cleanout Assembly |
C6409-40028 |
Plate - Belt Attachment Plate - Mounted to back of Ink Cartridge Carriage Assembly - Used to attach the Carriage Drive Belt |
C6455-60057 |
Plate - Shift plate assembly - Five plastic gears held in a two piece plastic frame - Attaches to feedroller assembly |
8120-8336 |
Power Cord - Power cord (Quartz Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 100V in Japan) |
8120-8337 |
Power Cord - Power cord (Quartz Gray) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in Australia and New Zealand) |
8120-8341 |
Power Cord - Power cord (Quartz Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in the United Kingdom) |
8120-8345 |
Power Cord - Power cord (Quartz Gray) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in South Africa and India) |
8120-8346 |
Power Cord - Power cord (Quartz Gray) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in China) |
8120-8900 |
Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 120V in the United States, Canada, Brazil, Latin America, and Saudi Arabia) Part 8120-8330 is no longer supplied. Please order the replacement, 8120-8900 |
8121-0023 |
Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in Europe, Asia Pacific, Germany, Spain, France, Netherlands, Switzerland, Italy, and Portugal) |
C6414N-Power_Cord |
Power Cord - Power module power cord- wall outlet cable to power module only. does not include power module. |
0957-2340 |
Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories. |
0957-2481 |
Power Module - Pwra brk uni 12vdc 15w |
5188-5676 |
Power Module - Power module (wall mount) - Input voltage 100VAC, 47/63Hz - Output voltage 13VDC, 800mA, 10.4 watts (for use in Japan) |
5188-6700 |
Power Module - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector |
C4557-60004 |
Power Module - Power supply module - 100V/240V, 50/60Hz - Requires separate AC power cord |
C6409-60014 |
Power Module - Power supply module - 100V/240V, 50/60Hz - Requires separate AC power cord - For worldwide use |
C6414N-Power_MDLE |
Power Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord |
C6414N-Power_MDLE_Assy |
Power Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord |
C6414N-Power_Supply |
Power Supply - Power supply board (internal pwr supply unit in the office machine). |
C6414N-Power_Supply_BRD |
Power Supply Board - High voltage power supply board |
C6414N-Print_Mchnsm |
Print Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables. |
C6414N-Pulley |
Pulley - Paper pick up tray motor pulley. |
5183-5268 |
Recovery Kit - Recovery Kit for DeskJet 1200 Series, DeskJet 850 Series, DeskJet 1000 Series, DeskJet 1100 Series |
5184-2833 |
Recovery Kit - Return kit - For returning defective Thermal InkJet (TIJ) 2.5 cartridges - Includes box and instructions |
C6414N-Repair_InkJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
C4557-20026 |
Retainer - Felt retainer - Holds the lubricating felt to the side of the carriage |
C6409-80030 |
Retainer - Left carriage retainer - Protects the carriage assembly from damage during shipment |
C6409-20004 |
Rod - Carriage rod - Shaft that the carriage assembly rides on - This item should be replaced only by trained, experienced service personnel |
C6414N-Rod_Carriage |
Rod Carriage - Carriage rod - shaft that the carriage assembly rides on |
C6414N-Rod_Scanner |
Rod Scanner - Scanner rod - shaft that the scanner assembly rides on |
C4557-20002 |
Roller - Pinch roller - Provides downward pressure on media as it passes by upper paper guide |
C4557-40015 |
Roller - Rear roller (Black) - Between paper and rear paper guide |
C4557-60025 |
Roller - Pivot feed roller - Shaft with 4 hard rollers - Does not include other items such as gear or encoder |
C5870-40030 |
Roller - Pivot assembly - Large plastic Item below the feed roller assembly - Picks and feeds media through print mechanism - Should be replaced only by experienced service personnel |
C5870-60092 |
Roller - Pickup roller assembly - Shaft with large rollers, gear, and 2 bearings - Picks paper from paper input tray - Available for trade sales in Europe and Asia/Pacific - Available for authorized service centers only in USA |
C6409-60037 |
Roller - Pivot feed roller assembly - Shaft with small rollers and paper encoder - This item should be replaced only by trained, experienced service personnel |
C6426-60049 |
Roller - Pickup roller - Shaft with large rollers - Does not include other items such as gear or bearings |
C6414N-Roller_Exit |
Roller Exit - Paper exit rollers - out put assembly. |
C6414N-Roller_Pickup |
Roller Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray |
C6414N-Sensor_Exit |
Sensor Exit - Exit media sensor sv |
C6414N-Sensor_Open |
Sensor Open - Door sensor assembly - open door sensor |
C6414N-Sensor_Out |
Sensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray |
C6414N-Sensor_Spot |
Sensor Spot - Spot sensor assembly is attached to the carriage assembly. |
C4557-60011 |
Separator - Separator pad for HP DeskJet 700 Series |
C6414N-Separator |
Separator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays. |
C6414N-Guide |
Service Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair. |
C6450-60021 |
Service Manual - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1 |
C6414N-Service_Station |
Service Station - Service station assembly - for conditioning the printheads when the carriage is in its home position |
C4557-20027 |
Shaft - Cartridge latch shaft near top of carriage |
C4557-40066 |
Shaft - Drive shaft with molded gears on each end |
C4557-00038 |
Shield - Paper motor ESD shield |
C6409-00007 |
Shield - Main logic PCA EMI shield |
C4557-60013 |
Sled - Sled cap assembly - Top cover of the service station assembly - Includes print cartridge caps (gaskets which keep the cartridges from drying out when not printing) |
C6414N-SLED_Assy |
SLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly |
C5870-40036 |
Slider - Integrated slider for carriage assembly |
C6414N-Slider |
Slider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side. |
C4557-40069 |
Snap - Cap snap - Installed between pallet/link assembly and sled cap assembly - Used to hold the cap spring |
C4557-40150 |
Snap - Pivot snap - Used to hold pivot to pick feed roller shaft |
C6414N-Speaker |
Speaker - Speaker assembly - includes speaker cable. |
C5870-40014 |
Spitton - Spittoon base - The bottom of the service station assembly |
C6414N-Spitton |
Spitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process |
C2145-00033 |
Spring - ESD spring - Installed between ESD blade and carriage PC board |
C4557-00009 |
Spring - Separator spring - Provides pressure between separator assembly and the center drive roller |
C4557-00011 |
Spring - Drawer spring - Holds input drawer in place |
C4557-00017 |
Spring - Belt tension spring - Provides tension for carriage belt |
C4557-00018 |
Spring - Encoder spring - Provides tension for encoder strip |
C4557-00026 |
Spring - Cap spring - Provides upward pressure on the sled cap assembly to seal the parked print cartridges |
C4557-00029 |
Spring - Left wall spring (front) - Holds left wall assembly in position |
C4557-00030 |
Spring - Left wall spring (rear) - Provides pressure against media |
C4557-00031 |
Spring - Paper length adjuster spring - Provides tension for paper input length adjuster |
C4557-00033 |
Spring - Link spring - Provides tension to shaft of pick cam gear |
C4557-00035 |
Spring - Paper pusher spring - Maintains alignment in paper tray |
C4557-20003 |
Spring - Rear roller spring - Flexible axle for rear roller |
C4557-20007 |
Spring - Pinch spring - Provides tension on upper paper guide |
C4557-20009 |
Spring - Latch spring - Provides friction for the knob on the rear cleanout door assembly |
C4557-20020 |
Spring - Envelope spring - Holds envelopes in position for picking |
C4557-20024 |
Spring - Shifter spring - Provides tension on the pivot |
C4557-20028 |
Spring - EOR tension spring - Maintains tension on wear strip |
C5870-20002 |
Spring - Paper stacker (kicker) spring |
C6409-00017 |
Spring - Wing torsion spring - Provides pressure on the wing during paper output |
C6414N-Spring_Cmprsn |
Spring Compression - Compression spring - on pulley wedge, for carriage belt tension |
C6822A |
Stickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet |
C6823A |
Stickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet |
C6410-40006 |
Stop - Fine paper length adjuster (Purple) - Holds paper firmly against the back of the paper input tray |
C4557-80001 |
Strip - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position |
C5870-00004 |
Strip - Wear strip - Long, spring loaded strip mounted in top of backbone - Used to ensure smooth ink cartridge carriage motion |
C6409-00008 |
Support - Upper paper guide support - Base for upper paper guide |
C6414N-Trailing_Cbl |
Trailing Cable - Trailing cable for scanner - cable connects from scanner to pc board. |
C4557-60049 |
Tray - Paper input tray pressure plate |
C5870-40028 |
Tray - Paper input tray base - Does not include the pressure plate assembly |
C5870-60081 |
Tray Assembly - Paper input tray assembly (partial) - Includes only base of tray and pressure plate assembly |
C6414N-Tray_Assy |
Tray Assembly - Paper input tray assembly for loading paper (bottom). |
C6414N-Tray_Assy_CVR |
Tray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit. |
C6414N-Tray_Base |
Tray Base - Tray base- bottom base of the paper input tray. |
C4557-60109 |
Turnaround Assembly - Turnaround assembly - Provides carriage belt tension - Does not include spring |
C4557-40068 |
Vent - Cap vent - For equalizing the print cartridge capping pressure |
C4557-80002 |
Washer - Felt washer - Used to lubricate the carriage rod |
C6414N-Window |
Window - Top/front access door assembly - print cartridge access door window. |
C4557-40024 |
Wing - Left wing - Holds printed paper after being ejected |
C4557-40025 |
Wing - Right wing - Holds printed paper after being ejected |
C4557-60014 |
Wiper - Wiper assembly - Metal base with plastic wipers |