HP parts available for C6429C HP DeskJet 955C PrinterC6426-80019 Absorber - Sponge - Absorbs excess ink and debris from cleaning print cartridges
C6429C-Absorber Absorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
C6429C-AC_Adapter AC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
C6429C-Actuator Actuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
C6429C-Arm_Delivery Arm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
C6429C-Arm_Door Arm Door - Carriage access door sensor arm
C6429C-Arm_Pickup Arm Pick Up - Paper detection arm - for registration plate on picking up paper
C6429C-Arm_Plate Arm Plate - Lever arm - used to lift the pressure plate lifter
C6429C-Arm_Sensing Arm Sensing - Arm assembly senses paper in bottom tray
C6429C-Arm_Tension Arm Tension - Tension arm - maintains tension on carriage belt
C6409-00009 Backbone - Backbone - Large metal item attached to the front of the printer base
C6455-00006 Backbone - Backbone - Large metal item attached to the front of the printer base
C6429-40031 Bar - Paper pusher bar (Bar with three levers) - Pushes the printed paper from the pivot and feed roller assembly on to the output paper tray
C6455-40050 Base - Belt attachment base - Mounts on rear of carriage assembly - Covers carriage PC board and holds belt attachment tower
C6429C-Battery Battery - Battery pack for hp printer
C6426-40018 Beam - Belt attachment beam (I-shaped) - Used to secure the belt attachment tower to the carriage assembly
C6426-40113 Bearing - Bearing for roller shaft
C6429-40008 Bearing - Roller bearing for HP DeskJet 6940 Series
C6426-40115 Belt - Carriage belt - Moves the carriage assembly across the carriage rod
C6429-40001 Belt - Paper drive belt
C6429C-Belt_Carriage Belt Carriage - Carriage belt - moves the carriage assembly across the carriage rod
C6429C-Belt_Paper Belt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly.
C6429C-Bezel Bezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel
C2145-00037 Blade - ESD blade for HP DeskJet 870C Series
C6426-00003 Bracket - IEC connector bracket - Holds the power cord socket
C6429-00014 Bracket - Paper drive assembly bracket - Paper drive motor, cluster gear and the encoder PC board all mount to this item
C6429C-Bracket_Left Bracket Left - Left bracket - carriage rod adjustment bracket (left)
C6429C-Bracket_Right Bracket Right - Right bracket - carriage rod adjustment bracket (right)
C6429C-Bracket_Tension Bracket Tension - Belt tension bracket - holds the carriage belt idler pulley
C6426-40032 Button - Top cover latch button
C6426-40039 Button - Side latch button
5063-1256 Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
5063-1257 Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
C2950A Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
C2951A Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
C2990A Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long
C2991A Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long
C6426-60007 Cable - Cable assembly - Has many connectors: a 30-pin (F), a 2-pin (F), two 3-pin (F), a 4-pin (F), two 5-pin (F), and an 8-pin (F) - Overall length is 67.3cm (26.5in)
C6426-60059 Cable - Cable assembly - Has 4-pin (F) connectors - 4.9cm (1.9in) long
C6429-80084 Cable - Carriage assembly flex cable - Has 24-pin (M) edge connectors - 38.6cm (15.2in) long
C6518A Cable - Universal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long
C6429C-Cable_Carriage Cable Carriage - Cable assembly which connects the main logic board to the carriage motor
C6429C-Cable_Interface Cable Interface - Parallel cable - connects from your printer to computer via your parallel port.
C6429C-Cable_Mchnsm Cable Mechanism - Cable assembly which connects the main logic board to the print mechanism
C6429C-Cable_Panel Cable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.
C6429C-Cable_USB Cable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.
C6426-40064 Cam - Drawer cam - Short, spring loaded lever attached to the paper tray frame - Used to draw input tray into position
C6429C-Cam Cam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position
C6429C-Cap_Lifter Cap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.
UG605E Care Pack - HP 2 year Care Pack w/Next Day Exchange for Printers
C6429-60162 Carriage - Carriage assembly - Includes carriage, felt, felt retainers, ink cartridge latches - Does not include trailing cable, PC board, belt attachment hardware, or slider
C6429C-Carriage_Assy Carriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
C6429C-Carriage_Base Carriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
C6429C-Carriage_Belt Carriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
C6429C-Carriage_Cable Carriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
C6429C-Carriage_Latch Carriage Latch - A-arm latch - retains latch over the printheads on the carriage
C6429C-Carriage_Latch_CVR Carriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
C6429C-Carriage_Motor Carriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
C6429C-Carriage_Only Carriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
C6429C-Carriage_PC_BRD Carriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
51645A Cartridge - HP InkJet Crtg 45A Black Large NAM
51645AA Cartridge - HP Inkjet Crtg 45A Black Large AP
51645AC Cartridge - HP Inkjet Crtg 45A Black Large Can
51645AE Cartridge - Black print cartridge (high capacity) - Prints approximately 840 pages based on 5% density on a 8-inch by 10-inch print area (Europe)
51645AL Cartridge - Black print cartridge (high capacity) - Prints approximately 840 pages based on 5% density on a 8-inch by 10-inch print area (Latin America)
51645G Cartridge - Black print cartridge (economy) - Prints approximately 415 pages based on 5% density on a 8 inch by 10 inch print area (USA)
51645GA Cartridge - HP 45 Economy Black InkJet Print Cartridge - Prints approximately 415 pages based on 5% density on a 8-inch by 10-inch print area (Asia Pacific)
51645GC Cartridge - Black print cartridge (economy) - Prints approximately 415 pages based on 5% density on a 8-inch by 10-inch print area (Canada)
51645GL Cartridge - HP 45 Economy Black InkJet Print Cartridge - Prints approximately 415 pages based on 5% density on a 8-inch by 10-inch print area (Latin America)
C6578AA Cartridge - HP Inkjet Cartridge 78 Large Color AP
C6578AC Cartridge - HP Inkjet Cartridge 78 Large Color Can
C6578AE Cartridge - HP Inkjet Cartridge 78 Large Color EUR
C6578AL Cartridge - HP 78XL Tri-color Inkjet Print Cartridge - Prints approximately 750 standard pages
C6578AN Cartridge - HP 78XL Tri-color InkJet Print Cartridge - Prints approximately 1200 color graphic pages (North America)
C6578DA Cartridge - HP Inkjet Cartridge 78 Color AP
C6578DC Cartridge - HP Inkjet Cartridge 78 Color Can
C6578DE Cartridge - Tri-color ink economy print cartridge - Prints approximately 450 pages based on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (Europe)
C6578DL Cartridge - HP Inkjet Cartridge 78 Color LAR
C6578DN Cartridge - HP 78 Tri-color InkJet Print Cartridge - 19ml - Prints approximately 450 color graphic pages (North America)
C6613AN Cartridge - Black print cartridges (high capacity) - (two-pack of 51645A) each prints approximately 840 pages based on 5% density on a 8-inch (20.3cm) by 10-inch (25.4cm) print area (USA)
C6429C-Chassis Chassis - Chassis assembly - the large plastic item that forms the base of the print mechanism
C5870-00002 Clip - Service station ESD grounding clip
C6409-20002 Clip - Rod mounting clip
C6426-00005 Clip - Ferrite clip - Used to hold trailing cable ferrite in place
C6426-00018 Clip - Capture clip for HP DeskJet 952C
C6429C-Clutch_Feed Clutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.
C6429C-Control_Panel Control Panel - Control panel assembly - control buttons and display on top front of the unit.
C6426-40014 Cover - Top Cover (Bonnet) - Mounts on Top of the Spittoon in the
C6426-40028 Cover - Top cover for HP DeskJet 955C
C6426-40029 Cover - Rear connector cover
C6426-40050 Cover - Cover plate for HP DeskJet 970C Series
C6426-40062 Cover - Paper tray right side cover
C6426-40063 Cover - Paper tray left side cover
C6426-40080 Cover - Left side cover
C6426-40081 Cover - Right side cover
C6426-40086 Cover - Cover - For rear paper cleanout door assembly
C6431-60139 Cover - Top cover (Bonnet)
C6429C-Cover_Back Cover Back - Back cover of printer, it is usually removed to clear paper jams.
C6429C-Cover_Cartridge Cover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
C6429C-Cover_Main Cover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
C6429C-Deflector Deflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
C6429C-Display Display - Status led display (LCD display assembly).
C6426-60038 Door - Rear cleanout door assembly - Paper jam cleanout door
C6429-40019 Door - Print cartridge access door - Does not include window
C6429C-Door_Carriage Door Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open.
C6429C-Door_Cartridge Door Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.
C6429C-Door_Rear Door Rear - Rear cleanout door assembly - rear paper jam clean out door assembly.
C6429C-Drive_Assy Drive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.
C6426-60033 Duplexer - Replacement duplexer module assembly - installs in rear of printer (in place of the rear clean out door assembly) - for performing two-sided printing (c6463a)
C6429C-Duplexer Duplexer - Auto duplexer assembly - provides double sided printing capability
C6463A Duplexer - Duplexer Module - REPLACEMENT DUPLEXER MODULE ASSEMBLY - INSTALLS IN REAR OF PRINTER (IN PLACE OF THE REAR CLEAN OUT DOOR ASSEMBLY)
C6487-60050 Duplexer - Replacement duplexer module assembly - installs in rear of printer (in place of the rear clean out door assembly) - for performing two-sided printing (c6463a)
C8955A Duplexer - Replacement duplexer module assembly - installs in rear of printer (in place of the rear clean out door assembly) - for performing two-sided printing.
C4557-80019 Encoder - Paper motor encoder disk
C6429C-Encoder Encoder - Encoder spring - provides tension for encoder strip
C6429C-Encoder_Disk Encoder Disk - Disk encoder - helps to provide position information of the paper
C6429C-Encoder_Strip Encoder Strip - Encoder strip - carriage position sensor reference
C6429C-Extender_Input Extender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths
C6429C-Extender_Output Extender Output - Paper exit tray extension
C6429C-Fan_PC_BRD Fan PC Board - Fan to cool power supply unit
C6429C-Fan_Vaccum Fan Vaccum - Vacuum fan assembly
C6429C-Feed_Rollers Feed Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk
9170-1796 Ferrite Assembly - Trailing cable ferrite
C3828A Film - Film (Transparency) for OfficeJet R65 Series, PhotoSmart P1000, PhotoSmart P1100, OfficeJet G55 Series Transparency Film 200 SHEETS.
C3832A Film - Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package
C3834A Film - Film (Transparency) for DeskJet 1600 Series, DeskJet 2000 Series, DeskJet 800 Series, DeskJet 600 Series
C3835A Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series
C6051A Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series
C6053A Film - Film (Transparency) for Color InkJet cp1700 Series, DeskJet 1180 Series, DeskJet 9300 Series, DeskJet 1280 Series
C6426-40052 Flag - OOPS flag - (out of paper) media sensor lever flag - Mounts on the top right edge of the upper paper guide
C6426-40089 Flag - DOOPS flag - Lifts the out of paper sensor (OOPS) flag out of the way when media is moving back towards the duplexer module - Mounts on the upper paper guide behind OOPS flag
C6429C-Flag_Paper Flag Paper - OOPS flag - out of paper sensor
C4557-40118 Foot - Rubber foot - Replacement rubber foot for the bottom of the printer (four used)
C6429C-Formatter Formatter - Formatter board assembly, this board communicates with your computer device and has MAC port connector.
C6426-60064 Frame - Paper tray frame assembly - Includes paper tray frame, paper tray cover, paper tray side covers, springs, and cam
C6429C-Front_Panel Front Panel - Front panel assembly - includes lcd and actuator buttons
C4557-40021 Gear - Feed roller idler gear
C4557-40079 Gear - Transfer gear (double gear)
C4557-40095 Gear - Encoder gear for HP Color Copier 260
C5870-40017 Gear - Cluster gear (large gear)
C6426-40042 Gear - Dual gear - 20 tooth/60 tooth
C6426-40044 Gear - Gear - 48 tooth
C6426-40045 Gear - Gear - 72 tooth - For roller shaft
C6426-40103 Gear - Kicker bar cam gear - Gear with cam lobe and offset pin
C6426-40112 Gear - Pickup roller gear assembly
C6429-40005 Gear - Cluster gear for HP OfficeJet K60
C6426-60034 Gear Assembly - Pivot plate assembly - Three small gears, a washer, and a spring mounted on a plastic carrier
C6429C-Gear_Assy Gear Assembly - ADF gear assembly driven by ADF main motor
C6429C-Gear_Cluster Gear Cluster - Cluster gear, large gear on service station
C6429C-Gear_Double Gear Double - Transfer gear - has double gear attached on service station
C6429C-Gear_Main Gear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller.
C6429C-Gear_Station Gear Station - Gears on shaft of spittoon station
C6429C-Glass_ADF_Window Glass ADF Window - Small glass piece used when scanning - copying - faxing with ADF feeder for this unit will ship Q5888-00002.
C6429C-Glass_Assy Glass Assembly - Main top copier glass assembly.
C4557-40121 Guide - Encoder disk guide
C6409-40030 Guide - Spring guide for HP DeskJet 880C Series
C6426-40021 Guide - Upper paper guide (Does NOT include any attaching parts) - Spring loaded flat plate that presses the media against the top of the feed roller assembly - Caution: this part can easily be broken
C6426-40033 Guide - Rear guide - Large plastic piece in the duplexer in which the rollers and springs mount on
C6426-40034 Guide - Inner guide - The large, curved plastic guide installed in the rear of the duplexer surrounding the roller shafts
C6426-40035 Guide - Flip guide (Curved plastic piece with large fins)
C6426-40036 Guide - Slot cover flap (Curved plastic piece with small fins)
C6426-40098 Guide - Lower paper guide housing (Does NOT include any attaching parts)
C6428-40002 Guide - Lower paper guide (Curved plastic paper guide) - The six guide rollers mount on this piece
C6429-60141 Guide - Inner paper guide (Includes antistatic brush) - Guides the paper through the print mech and over the upper paper guide
C6429-60158 Guide - Media input length adjuster assembly - Includes both coarse and fine length adjusters
C6429-60159 Guide - Width adjust - Holds media against right wall of input tray
C6429C-Guide_Paper Guide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken
C6426-40067 Handle - Paper input tray left handle
C6426-40068 Handle - Paper input tray right handle
C6429C-Holder Holder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place.
C6426-40007 Housing - Housing for power supply PC board
C6429C-Idler Idler - Scanner belt idler assembly - maintains scannter belt tension.
C6429C-Ink_DLVRY Ink Delivery System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly
C6429C-Ink_Supply_Station Ink Supply Station - Ink supply service station (iss) assembly
C6049A Iron On Transfers - Iron-On Transfers for DeskJet 2500C Series, HP DeskJet D1400 Printer Series, DeskJet D24XX Series, DeskJet F4180 Series
C6050A Iron On Transfers - Iron-On Transfers for OfficeJet K80 Series, OfficeJet 700 Series, OfficeJet T45 Series, OfficeJet T65 Series
C6065A Iron On Transfers - Iron-On Transfers for DeskJet 6620 Series, OfficeJet V40 Series, PSC 2100 Series All in One, DeskJet 640 Series
C6429-60180 Keypad - Keypad and cover assembly - Quartz Gray
C6426-40118 Kicker - Kicker bar - Restacks paper in paper input tray stack after the top sheet is picked
C6428-40001 Knob - Latch knob - Mounts on the rear paper cleanout door assembly
C4557-40042 Latch - Plastic latch (Y-shaped)
C6426-00007 Latch - Wedge latch for HP DeskJet 950C Series
C6426-00015 Lever - Pressure plate lever - Transfers upward pressure from the separator lifter to the kicker
C6426-40100 Lifter - Separator peg lifter - Used to lift and retain the separator peg under spring tension - Caution: if this part is installed incorrectly, printer will NOT function
C6429-60025 Link - Kicker bar cam link (spring loaded)
C4557-60003 Motor - Carriage motor assembly (Includes pulley)
C5870-60004 Motor - Service station motor assembly - Includes PC board and gear
C6429-60004 Motor - Paper drive motor assembly - Includes pulley
C6429C-Motor_Carriage Motor Carriage - Carriage motor - motor that drives the carriage assembly
C6429C-MTR_Srvce_Station Motor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly
C6429-40091 NamePlate - Nameplate - C6429C DeskJet 955C printer logo
C6429C-Overlay Overlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately.
C6409-80003 Pad - Lubricating felt pad (C-shaped) - Lubricates the carriage assembly as it moves across the carriage rod
C6426-60054 Pallet - Pallet/link assembly - Installed between spittoon and sled cap assembly - Mounting platform for the wiper and capping systems parts
51634Y Paper - HP Premium Inkjet Paper - A size (8.5 x 11-inches) - 200 sheets
51634Z Paper - InkJet non-glossy LX paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package
C1812A Paper - Greeting card paper pack (White) - A size (8.5 x 11-inches) - Includes 20 sheets and 20 envelopes
C1820A Paper - Banner paper - A size (8.5 x 11-inches), 24 lb, perforated for easy separation - 100 sheets total per pack (5 stacks of 20 continuous sheets)
C1821A Paper - Banner paper - A4 size (21.0cm x 29.7cm), 24 lb, perforated for easy separation - 100 sheets total per pack (5 stacks of 20 continuous sheets)
C1824A Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 500 sheets
C1825A Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 500 sheets
C1853A Paper - Premium InkJet Heavyweight Paper - A4 size (21.0cm x 29.7cm) - Coated on both sides - 100 sheets
C5976A Paper - Bright white InkJet paper - A size (8.5 x 11-inches) - 200 sheets per package
C5976B Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 250 sheets
C5977A Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 200 sheets
C5977B Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 250 sheets
C6039A Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper
C6042A Paper - Paper (Matte) for DeskJet D14XX Series, DeskJet D42XX Series, PhotoSmart 7350 Printer, PhotoSmart 7150 Printer
C6043A Paper - Paper (Photo) for DeskJet 1100 Series, DeskJet 1120 Series, DeskJet 1220 Series, DeskJet 1200 Series
C6055A Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper
C6587AN Paper - Printable Expressions all occasions card kit - Includes 20 greeting cards and envelopes, and a CD-ROM with 24 original pieces of art
C6765A Paper - Paper (Glossy) for PSC 1500 Series, PSC 1500 Series All-In-One, PhotoSmart D71XX Series, PhotoSmart D73XX Series
C6817A Paper - Brochure and flyer paper - Glossy on both sides - A size (8.5 x 11-inches), 98 brightness - 50 sheets
C6818A Paper - Paper (Glossy) for OfficeJet 5615 Series, OfficeJet 5605 Series, OfficeJet 6310 All-in-One, OfficeJet 6301 Series
C6828A Paper - Greeting card paper pack (Ivory, Matte) - A size (8.5 x 11-inches) - Felt textured - Includes 20 sheets and 20 envelopes
C6831A Paper - HP Premium Plus Glossy Photo Paper - A size (8.5 x 11-inches) - 20 sheets
C6832A Paper - Paper (Glossy) for DeskJet F4180 Series, HP Deskjet F4100 All-in-One printer series, DeskJet F4140 Series, DeskJet F4135 All-In-One
C6944A Paper - Premium Plus Paper (High Gloss) - 10.2cm (4in) x 15.2cm (6in) - 20 sheets
C6945A Paper - Premium Plus glossy InkJet photographic paper - 10.0cm (3.9in) x 15.0cm (5.9in) - 20 sheets per package
C6951A Paper - Paper (Matte) for PSC 1400 Series, OfficeJet 5610 Series, OfficeJet 5605 Series, OfficeJet 5615 Series
C6955A Paper - Professional Brochure and Flyer Paper (Matte) - A size (8.5 x 11-inches) - 50 sheets
Q7852A Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper
C6426-60058 PC Board - Interconnect PC board - Small square PC board with 4 contact pads for the duplexer module
C6429-60208 PC Board - Power supply PC board
C6429-60319 PC Board - Carriage PC board - Contains the print cartridge control circuitry - For Japan only
C6429-69319 PC Board - Carriage PC board - Contains the print cartridge control circuitry - For Japan only
C6429-69364 PC Board - Main logic PC board
C6429C-PC_BRD PC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only
C6455-60079 PC Board - Paper drive assembly encoder PC board
C8154-60073 PC Board - Interconnect PC board - Small square PC board with four contact pads for the duplexer module
C6429C-PC_BRD_DC PC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.
C6429C-PC_BRD_Interface PC Board Interface - Internal print server lan interface board - plugs into peripheral eio. usefull for networking and multiple users.
J3258B PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
J3263G PC Board Interface - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network
C6426-40102 Peg - Separator Peg - Pushes up the separator pad during the paper pick operation
C6429C-Pinchwheel Pinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs
C6426-40020 Pivot - Pivot - Large plastic item installed over the Feed Roller Assembly
C6429-40093 Pivot - Pivot
C6426-60020 Plate - Pressure plate - Mounts in the rear of the paper input tray - Used to push the paper stack into the feed roller
C6455-60057 Plate - Shift plate assembly - Five plastic gears held in a two piece plastic frame - Attaches to feedroller assembly
8120-6317 Power Cord - Power cord (Black) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in South Africa, India, and Saudi Arabia)
8120-8336 Power Cord - Power cord (Quartz Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 100V in Japan)
8120-8337 Power Cord - Power cord (Quartz Gray) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in Australia and New Zealand)
8120-8341 Power Cord - Power cord (Quartz Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in the United Kingdom)
8120-8345 Power Cord - Power cord (Quartz Gray) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in South Africa and India)
8120-8346 Power Cord - Power cord (Quartz Gray) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in China)
8120-8900 Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 120V in the United States, Canada, Brazil, Latin America, and Saudi Arabia) Part 8120-8330 is no longer supplied. Please order the replacement, 8120-8900
8121-0022 Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in the United Kingdom)
8121-0023 Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in Europe, Asia Pacific, Germany, Spain, France, Netherlands, Switzerland, Italy, and Portugal)
C6429C-Power_Cord Power Cord - Power module power cord- wall outlet cable to power module only. does not include power module.
C6429C-Power_MDLE Power Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord
C6429C-Power_MDLE_Assy Power Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord
0957-2125 Power Supply - HP Ac Adapter (31V/ 2.42A) Power Supply unit for HP Business InkJet Printers.
C6426-60003 Power Supply - Power Supply PC Board
C6429C-Power_Supply Power Supply - Power supply board (internal pwr supply unit in the office machine).
C6429C-Power_Supply_BRD Power Supply Board - High voltage power supply board
C6429C-Print_Mchnsm Print Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
J3263A Print Server - External JetDirect 300X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) or 100Base-TX (RJ-45) LAN
C6429C-Pulley Pulley - Paper pick up tray motor pulley.
C6426-00001 Rail - Upper rail for HP DeskJet 952C
C6426-40026 Rail - Paper pusher rail
C6429C-Repair_InkJet Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C6426-00006 Retainer - Felt retainer - Holds the carriage lubrication felt on both sides of the pen carriage assembly
C6409-20003 Rod - Carriage rod - Slider/guide rod for the pen carriage assembly
C6429C-Rod_Carriage Rod Carriage - Carriage rod - shaft that the carriage assembly rides on
C6429C-Rod_Scanner Rod Scanner - Scanner rod - shaft that the scanner assembly rides on
C4557-20002 Roller - Pinch roller - Provides downward pressure on media as it passes by upper paper guide
C4557-40015 Roller - Rear roller (Black) - Between paper and rear paper guide
C4557-60025 Roller - Pivot feed roller - Shaft with 4 hard rollers - Does not include other items such as gear or encoder
C6426-60035 Roller - Roller shaft assembly - Shaft with three large rollers, two bearings, and one gear
C6426-60049 Roller - Pickup roller - Shaft with large rollers - Does not include other items such as gear or bearings
C6429-60144 Roller - Pickup roller assembly - Shaft with large rollers, gear, and 2 bearings - Feeds paper from the paper input tray into the print mechanism
C6455-60056 Roller - Pivot and feed roller assembly - Includes pivot and shaft with 4 rollers, gears, encoder disk, bearings - Feeds the media under the carriage assembly and print cartridges
C6429C-Roller_Exit Roller Exit - Paper exit rollers - out put assembly.
C6429C-Roller_Pickup Roller Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray
C6426-60013 Sensor - Spot sensor assembly
C6429C-Sensor_Exit Sensor Exit - Exit media sensor sv
C6429C-Sensor_Open Sensor Open - Door sensor assembly - open door sensor
C6429C-Sensor_Out Sensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray
C6429C-Sensor_Spot Sensor Spot - Spot sensor assembly is attached to the carriage assembly.
C4557-60011 Separator - Separator pad for HP DeskJet 700 Series
C6429C-Separator Separator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
C6429C-Guide Service Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
C6429C-Service_Station Service Station - Service station assembly - for conditioning the printheads when the carriage is in its home position
C4557-40066 Shaft - Drive shaft with molded gears on each end
C4557-60013 Sled - Sled cap assembly - Top cover of the service station assembly - Includes print cartridge caps (gaskets which keep the cartridges from drying out when not printing)
C6426-40037 Sled - Long roller sled - Installed over rear roller
C6426-40038 Sled - Short roller sled - Installed over rear roller
C6429C-SLED_Assy SLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly
C6426-40001 Slider - Slider for carriage assembly - Rides along the upper guide rail on the print mechanism chassis
C6429C-Slider Slider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.
C6455-40026 Slider - Slider for carriage assembly - Rides along the upper guide rail on the print mechanism chassis
C4557-40069 Snap - Cap snap - Installed between pallet/link assembly and sled cap assembly - Used to hold the cap spring
C6429C-Speaker Speaker - Speaker assembly - includes speaker cable.
C6426-40085 Spitton - Spittoon base - The bottom and main housing of the service station assembly - Holds any residual ink from the print cartridge cleaning process
C6429C-Spitton Spitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process
C2145-00033 Spring - ESD spring - Installed between ESD blade and carriage PC board
C4557-00009 Spring - Separator spring - Provides pressure between separator assembly and the center drive roller
C4557-00017 Spring - Belt tension spring - Provides tension for carriage belt
C4557-00026 Spring - Cap spring - Provides upward pressure on the sled cap assembly to seal the parked print cartridges
C4557-20003 Spring - Rear roller spring - Flexible axle for rear roller
C4557-20007 Spring - Pinch spring - Provides tension on upper paper guide
C4557-20009 Spring - Latch spring - Provides friction for the knob on the rear cleanout door assembly
C4557-20024 Spring - Shifter spring - Provides tension on the pivot
C6409-00011 Spring - Encoder spring - Provides tension for encoder strip
C6426-00017 Spring - Lifter spring - Provides upper tension on the kicker bar (cam follower) lift plate
C6426-20002 Spring - Send RFQ below for updated Price and Description
C6426-20005 Spring - Spring for rear rollers
C6426-20008 Spring - Envelope spring assembly - Aligns envelopes when inserted into the envelope feed slot
C6426-20011 Spring - Rod spring - Installed on right side of backbone
C6426-20012 Spring - Tray spring - Installed near front of paper tray frame - Used in conjunction with the drawer cam to hold the paper input tray assembly in position
C6429C-Spring_Cmprsn Spring Compression - Compression spring - on pulley wedge, for carriage belt tension
C6822A Stickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C6823A Stickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C6429-60157 Stop - Fine paper length adjuster - Holds paper firmly against the back of the paper input tray
C4557-80001 Strip - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position
C6426-00004 Support - Upper paper guide support - Support bracket which attaches to the print mech frame for mounting the upper paper guide
C6426-40117 Support - Side latch spring support
C6426-40017 Tower - Belt attachment tower - Used to attach the carriage belt to the carriage assembly
C6429C-Trailing_Cbl Trailing Cable - Trailing cable for scanner - cable connects from scanner to pc board.
C6426-40097 Tray - Paper output business tray cover
C6426-40123 Tray - Paper input tray base
C6429-40062 Tray - Paper output business tray cover - Seperates the output media from the input media
C6429-60156 Tray Assembly - Paper input business tray/drawer assembly - Includes tray base, pressure plate, width adjust, length adjust, and paper tray handles
C6429C-Tray_Assy Tray Assembly - Paper input tray assembly for loading paper (bottom).
C6429C-Tray_Assy_CVR Tray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit.
C6429C-Tray_Base Tray Base - Tray base- bottom base of the paper input tray.
C4557-60109 Turnaround Assembly - Turnaround assembly - Provides carriage belt tension - Does not include spring
C4557-40068 Vent - Cap vent - For equalizing the print cartridge capping pressure
C6429-40027 Window - Window - For print cartridge access door
C6429-60155 Window - Print cartridge access door assembly - Includes door and window
C6429C-Window Window - Top/front access door assembly - print cartridge access door window.
C6429-60006 Wingframe - Right wingframe assembly - Supports paper from the print mechanism prior to exiting to the paper tray frame assembly
C6429-60007 Wingframe - Left wingframe assembly - Supports paper from the print mechanism prior to exiting to the paper tray frame assembly
C4557-60014 Wiper - Wiper assembly - Metal base with plastic wipers