| C5870-80007 |
Absorber - Spittoon sponge - Absorbs excess ink from cartridges |
| C6687A-Absorber |
Absorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters. |
| C6687A-AC_Adapter |
AC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached. |
| C6687A-Actuator |
Actuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm). |
| C6687A-ADF_Arm |
ADF Arm - Senses paper in the ADF area tray / feeder tray. this is a front flapper arm - part of the paper separation mechanism for the paper pickup assembly - mounts just in front of the front separation belts in the ADF assembly. |
| C6687A-ADF_Feed_Assy |
ADF Feed Assembly - ADF assembly - does not include ADF input tray. ADF assembly includes the complete ADF assembly (motor, gears, rollers, sensor, does not include the ADF pad or plastic flatbed cover. (for entire unit please see ADF unit assembly). |
| C6687A-ADF_Input_Tray |
Adf Input Tray - ADF tray ( for automatic document feeder) this is where papers are placed for feeding into unit. |
| C6687A-ADF_Motor |
ADF Motor - ADF motor - the scanner ADF motor is located on left rear corner of ADF drive, location varies from each unit. however, this is the main motor on the ADF unit. |
| C6687A-ADF_Output_Tray |
ADF Out Put Tray - ADF out put tray is where paper come out of ADF (automatic document feeder). For this unit, we will ship the entire ADF Assembly. |
| C6687A-ADF_Pad |
ADF Pad - ADF paper seperation pad assembly - mounts in the center of the ADF separation pad frame assembly. this pad prevents from multiple feeding or preventing paper jams while faxing scanning or copying. |
| C6687A-ADF_PC_BRD |
ADF PC Board - Control Board on the ADF unit |
| C6687A-ADF_Roller_Kit |
ADF Roller Kit - ADF upper pick roller replacement kit. these are the rollers that feed paper into the feeder to be scan copy or faxed. |
| C6687A-ADF_Scanner |
ADF Scanner - ADF scanner (optical) assembly - includes the chassis assembly, scanner lens assembly (includes the charge coupled device (ccd)), the scanning lamp, ADF analog processor board, and ADF inverter board - this is the assembly that scans, copies documents. |
| C6687A-ADF_Sensor_BRD |
ADF Sensor Board - ADF sensor pc board assembly - narrow strip pc board with the two document skew sensors, registration sensor, and timing sensor - mounts on top of the registration guide assembly in the ADF main assembly |
| C6687A-ADF_Unit_Assy |
ADF Unit Assembly - Complete replacement assembly unit for Officejet Copier top assembly only. This includes the ADF (automatic document feeder) for this unit. |
| C6409-40021 |
Adjuster - Carriage rod adjuster - Used to support and align the carriage rod (2 used) - This item should be replaced only by trained, experienced service personnel |
| C6687A-Arm_Delivery |
Arm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm |
| C6687A-Arm_Door |
Arm Door - Carriage access door sensor arm |
| C6687A-Arm_Pickup |
Arm Pick Up - Paper detection arm - for registration plate on picking up paper |
| C6687A-Arm_Plate |
Arm Plate - Lever arm - used to lift the pressure plate lifter |
| C6687A-Arm_Sensing |
Arm Sensing - Arm assembly senses paper in bottom tray |
| C6687A-Arm_Tension |
Arm Tension - Tension arm - maintains tension on carriage belt |
| C6409-00013 |
Backbone - BacKBone - Large metal item where the main logic PCA and the carriage drive motor are mounted - This item should be replaced only by trained, experienced service personnel |
| C6680-60059 |
Base - Scanner base assembly - Includes base and both ribbon cables |
| C6687A-Battery |
Battery - Battery pack for hp printer |
| C4557-40049 |
Belt - Carriage drive belt - Moves printhead side to side |
| C6680-80070 |
Belt - Scanner belt - Moves the scanner module back and forth under the scanner glass |
| C6687A-Belt_ADF |
Belt ADF - Transport belt motor - provides the drive to transport paper through the ADF unit. this belt goes in the ADF assembly drive unit |
| C6687A-Belt_Carriage |
Belt Carriage - Carriage belt - moves the carriage assembly across the carriage rod |
| C6687A-Belt_Duplex |
Belt Duplex - Duplex timing belt - small belt that goes on the duplexer unit |
| C6687A-Belt_Paper |
Belt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly. |
| C6687A-Belt_Scanner |
Belt Scanner - Scanner assembly belt. belt moves the scanner while copying or scanning documents. |
| C6680-40050 |
Bezel - Scanner bezel - Top part of the scanner assembly - The scanner glass mounts in this bezel |
| C6680-60035 |
Bezel - Control panel bezel - Installed over the control panel - English |
| C6680-60037 |
Bezel - Control panel bezel - Installed over the control panel - French |
| C6687A-Bezel |
Bezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel |
| C2145-00037 |
Blade - ESD blade for HP DeskJet 870C Series |
| C4557-40128 |
Brace - Left backbone brace - Provides support for backbone |
| C4557-40130 |
Brace - Left wall brace - Provides support for left wall |
| C5870-40020 |
Brace - Right backbone brace - Installed on right side of printer base to provide support for backbone |
| C5870-00010 |
Bracket - Paper motor mounting bracket |
| C6687A-Bracket_Left |
Bracket Left - Left bracket - carriage rod adjustment bracket (left) |
| C6687A-Bracket_Right |
Bracket Right - Right bracket - carriage rod adjustment bracket (right) |
| C6687A-Bracket_Tension |
Bracket Tension - Belt tension bracket - holds the carriage belt idler pulley |
| 5063-1254 |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 3.0m (9.8ft) long -- Mini Connector |
| 5063-1255 |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long mini-connector. |
| C2946A |
Cable - 8120-8724 IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin high density IEEE-1284C (M) connector (type C) - 3.0m (9.8ft) long mini connector. |
| C2947A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long |
| C4557-60022 |
Cable - Cable assembly - An 11-pin (F) connector to two 3-pin (F) connectors and a 7-pin (F) connector - 36.8cm (14.5in) long |
| C4557-80075 |
Cable - Carriage assembly flex cable - 40.3cm (15.9in) long |
| C5870-60140 |
Cable - Cable assembly - 12-pin (F) connector, 5-pin (F) connector, and 7-pin (F) connector - 43.9cm (17.3in) long |
| C6680-60002 |
Cable - Scanner motor cable |
| C6680-60057 |
Cable - Ribbon cable - Has 10-pin (M) connectors - 71.8cm (28.3in) long |
| C6680-80002 |
Cable - Ribbon cable - Has 26-pin (M) edge connectors - 15.5cm (6.1in) long |
| C6680-80003 |
Cable - Centronics parallel interface cable - 25-pin (M) with thumbscrews to 36-pin Centronics (M) - 2m (6.6ft) long miniconnector |
| C6680-80010 |
Cable - Cable assembly - 16-pin (F) connector to 34.9cm (13.8in) cable with 3-pin (F) connector, 56.6cmn (22.3in) cable with 3-pin (F) connector, 59.4cm (23.4in) cable with 7-pin (F) connector, and 61cm (24in) cable with 5-pin (F) connector |
| C6680-80050 |
Cable - Scanner module trailing cable - Has 20-pin (M) edge connectors - 42.9cm (16.9in) long |
| C6687A-Cable_Carriage |
Cable Carriage - Cable assembly which connects the main logic board to the carriage motor |
| C6687A-Cable_Interface |
Cable Interface - Parallel cable - connects from your printer to computer via your parallel port. |
| C6687A-Cable_Mchnsm |
Cable Mechanism - Cable assembly which connects the main logic board to the print mechanism |
| C6687A-Cable_Panel |
Cable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display. |
| C6687A-Cable_USB |
Cable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing. |
| C4557-40034 |
Cam - Drawer cam - Short, spring loaded lever attached to the base of the wing frame - Used to draw input tray into position |
| C6409-40040 |
Cam - Pick cam - Controls pressure plate and lever |
| C6687A-Cam |
Cam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position |
| C6687A-Cap_Lifter |
Cap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place. |
| C6409-40031 |
Carriage - Ink cartridge carriage |
| C6409-60003 |
Carriage - Ink cartridge carriage assembly - This item should be replaced only by trained, experienced service personnel |
| C6687A-Carriage_Assy |
Carriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider. |
| C6687A-Carriage_Base |
Carriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base |
| C6687A-Carriage_Belt |
Carriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting. |
| C6687A-Carriage_Cable |
Carriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side). |
| C6687A-Carriage_Latch |
Carriage Latch - A-arm latch - retains latch over the printheads on the carriage |
| C6687A-Carriage_Latch_CVR |
Carriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle. |
| C6687A-Carriage_Motor |
Carriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement. |
| C6687A-Carriage_Only |
Carriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly). |
| C6687A-Carriage_PC_BRD |
Carriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it. |
| 51645A |
Cartridge - HP InkJet Crtg 45A Black Large NAM |
| 51645AA |
Cartridge - HP Inkjet Crtg 45A Black Large AP |
| 51645AC |
Cartridge - HP Inkjet Crtg 45A Black Large Can |
| 51645AE |
Cartridge - Black print cartridge (high capacity) - Prints approximately 840 pages based on 5% density on a 8-inch by 10-inch print area (Europe) |
| 51645AL |
Cartridge - Black print cartridge (high capacity) - Prints approximately 840 pages based on 5% density on a 8-inch by 10-inch print area (Latin America) |
| 51645G |
Cartridge - Black print cartridge (economy) - Prints approximately 415 pages based on 5% density on a 8 inch by 10 inch print area (USA) |
| 51645GA |
Cartridge - HP 45 Economy Black InkJet Print Cartridge - Prints approximately 415 pages based on 5% density on a 8-inch by 10-inch print area (Asia Pacific) |
| 51645GC |
Cartridge - Black print cartridge (economy) - Prints approximately 415 pages based on 5% density on a 8-inch by 10-inch print area (Canada) |
| 51645GL |
Cartridge - HP 45 Economy Black InkJet Print Cartridge - Prints approximately 415 pages based on 5% density on a 8-inch by 10-inch print area (Latin America) |
| C1823A |
Cartridge - Tri-Color Ink Print Cartridge - Prints Approximately 475 |
| C1823AA |
Cartridge - HP Ink Crtg 23A Color AP |
| C1823AC |
Cartridge - Tri-color ink print cartridge - Prints approximately 475 pages based on 13.5% total density (4.5% for each colors) on a 8-inch by 10-inch print area (Canada) |
| C1823AE |
Cartridge - THP Ink Crtg 23A Color EUR |
| C1823AL |
Cartridge - HP Ink Crtg 23A Color LAR |
| C1823D |
Cartridge - HP 23 Tri-color InkJet cartridge - 30 ml - Prints approximately 640 color graphics pages (actual yield depends on specific use including images printed, printer, print settings and other factors)(North America) |
| C1823DA |
Cartridge - HP Ink Crtg 23D Large Color AP |
| C1823DC |
Cartridge - HP Ink Crtg 23D Large Color Can |
| C1823DE |
Cartridge - Tri-color ink print cartridge - prints approximately 360 pages based on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (europe) |
| C1823DL |
Cartridge - HP Ink Crtg 23D Large Color LAR |
| C1823G |
Cartridge - Tri-color ink economy print cartridge - Prints approximately 180 pages based on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (USA) |
| C1823GA |
Cartridge - Tri-color ink economy print cartridge - Prints approximately 180 pages based on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (Asia/Pacific) |
| C1823GL |
Cartridge - Tri-color ink economy print cartridge - Prints approximately 180 pages based on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (Latin America) |
| C1823T |
Cartridge - Tri-color ink cartridges (two-pack of C1823D) - Each prints approximately 360 pages on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (USA) |
| C1823TA |
Cartridge - Tri-color ink cartridges (two-pack of C1823D) - Each prints approximately 360 pages on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (Asia/Pacific) |
| C1823TE |
Cartridge - Tri-color ink cartridges (two-pack of C1823D) - Each prints approximately 360 pages on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (Europe) |
| C1823TL |
Cartridge - Tri-color ink cartridges (two-pack of C1823D) - Each prints approximately 360 pages on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (Latin America) |
| C6613AN |
Cartridge - Black print cartridges (high capacity) - (two-pack of 51645A) each prints approximately 840 pages based on 5% density on a 8-inch (20.3cm) by 10-inch (25.4cm) print area (USA) |
| C6618AN |
Cartridge - Tri-color ink cartridges (two-pack of C1823D) - Each prints approximately 360 pages on 13.5% total density (4.5% for each color) on a 8-inch (20.3cm) by 10-inch (25.4cm) print area (USA) |
| C5870-00006 |
Channel - Width adjust channel |
| C6680-40020 |
Chassis - Middle chassis - Covers printer mechanism and provides the mounting platform for the scanner/control panel assembly |
| C6687A-Chassis |
Chassis - Chassis assembly - the large plastic item that forms the base of the print mechanism |
| C4557-00043 |
Clip - Paperclip - Holds upper paper guide pinch rollers in place |
| C5870-00002 |
Clip - Service station ESD grounding clip |
| C6687A-Clutch_ADF |
Clutch ADF - ADF paper clutch unit. clutch that controls movement on the ADF feeder |
| C6687A-Clutch_Feed |
Clutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit. |
| C6680-60082 |
Control Panel - Control panel (Keypad) assembly - Does NOT include cable |
| C6687A-Control_Panel |
Control Panel - Control panel assembly - control buttons and display on top front of the unit. |
| C5870-40016 |
Cover - Service station bonnet - Top cover of the spittoon - Has cutout for pallet/link assembly |
| C6680-40100 |
Cover - Top cover (Document cover) - Does not include foam pad |
| C6680-60027 |
Cover - Top cover (Document cover) assembly - Includes cover, foam pad, and hinge |
| C6687A-Cover_Back |
Cover Back - Back cover of printer, it is usually removed to clear paper jams. |
| C6687A-Cover_Cartridge |
Cover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves. |
| C6687A-Cover_Main |
Cover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off. |
| C6687A-Deflector |
Deflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly |
| C6687A-Display |
Display - Status led display (LCD display assembly). |
| C4557-40026 |
Door - Output door - Separates output media from input media |
| C6680-60014 |
Door - Pen access door assembly - Lift up access door for changing print cartridges - Includes door and latch |
| C6680-60065 |
Door - Rear paper jam cleanout door assembly |
| C6680-60070 |
Door - Rear cleanout door assembly kit - Paper jam cleanout door |
| C6687A-Door_Carriage |
Door Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open. |
| C6687A-Door_Cartridge |
Door Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door. |
| C6687A-Door_Rear |
Door Rear - Rear cleanout door assembly - rear paper jam clean out door assembly. |
| C6687A-Drive_Assy |
Drive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring. |
| C6687A-Drive_Assy_ADF |
Drive Assy ADF - Media chassis assembly (paper drive) - moves paper from ADF assembly to scanner assembly - includes media chassis, rollers, gears, flag, sensor, deflector, cable, springs |
| C6687A-Duplexer |
Duplexer - Auto duplexer assembly - provides double sided printing capability |
| C4557-80019 |
Encoder - Paper motor encoder disk |
| C6687A-Encoder |
Encoder - Encoder spring - provides tension for encoder strip |
| C6687A-Encoder_Disk |
Encoder Disk - Disk encoder - helps to provide position information of the paper |
| C6687A-Encoder_Strip |
Encoder Strip - Encoder strip - carriage position sensor reference |
| C6687A-Extender_ADF |
Extender ADF - Paper extension for the automatic document feeder (ADF) input tray |
| C6687A-Extender_Input |
Extender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths |
| C6687A-Extender_Output |
Extender Output - Paper exit tray extension |
| C6687A-Fan_PC_BRD |
Fan PC Board - Fan to cool power supply unit |
| C6687A-Fan_Vaccum |
Fan Vaccum - Vacuum fan assembly |
| C6687A-Feed_Rollers |
Feed Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk |
| C6687A-Feed_Rollers_ADF |
Feed Rollers ADF - ADF feed roller kit - includes all rollers that feed paper through the feeder. |
| 9170-1655 |
Ferrite Assembly - Ferrite core for HP OfficeJet K60 |
| 9170-1821 |
Ferrite Assembly - Ferrite core - Attaches to the control panel ribbon cable |
| C6680-80042 |
Ferrite Assembly - Ferrite core - Attaches to the scanner ribbon cable |
| C3828A |
Film - Film (Transparency) for OfficeJet R65 Series, PhotoSmart P1000, PhotoSmart P1100, OfficeJet G55 Series Transparency Film 200 SHEETS. |
| C3832A |
Film - Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package |
| C3834A |
Film - Film (Transparency) for DeskJet 1600 Series, DeskJet 2000 Series, DeskJet 800 Series, DeskJet 600 Series |
| C3835A |
Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series |
| C6051A |
Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series |
| C6053A |
Film - Film (Transparency) for Color InkJet cp1700 Series, DeskJet 1180 Series, DeskJet 9300 Series, DeskJet 1280 Series |
| C5870-40024 |
Flag - OOPS flag - Media sensor - Mounts on the top right edge of the upper paper guide |
| C6680-40001 |
Flag - A4 flag - Media sensor - Mounts on the top left edge of the upper paper guide |
| C6687A-Flag_ADF |
Flag ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounths on the front frame of the ADF paper pickup assembly |
| C6687A-Flag_Paper |
Flag Paper - OOPS flag - out of paper sensor |
| C4557-40118 |
Foot - Rubber foot - Replacement rubber foot for the bottom of the printer (four used) |
| C6687A-Formatter |
Formatter - Formatter board assembly, this board communicates with your computer device and has MAC port connector. |
| C5870-40039 |
Frame - Wing frame - Chassis for in/out tray components |
| C6687A-Front_Panel |
Front Panel - Front panel assembly - includes lcd and actuator buttons |
| C4557-40007 |
Gear - Pick gear for HP Color Copier 170 |
| C4557-40021 |
Gear - Feed roller idler gear |
| C4557-40079 |
Gear - Transfer gear (double gear) |
| C4557-40095 |
Gear - Encoder gear for HP Color Copier 260 |
| C4557-40102 |
Gear - Feed roller cluster gear |
| C5870-40017 |
Gear - Cluster gear (large gear) |
| C6687A-Gear_Assy |
Gear Assembly - ADF gear assembly driven by ADF main motor |
| C6687A-Gear_Cluster |
Gear Cluster - Cluster gear, large gear on service station |
| C6687A-Gear_Double |
Gear Double - Transfer gear - has double gear attached on service station |
| C6687A-Gear_Main |
Gear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller. |
| C6687A-Gear_Station |
Gear Station - Gears on shaft of spittoon station |
| C6687A-Glass_ADF_Window |
Glass ADF Window - Small glass piece used when scanning - copying - faxing with ADF feeder for this unit will ship Q5888-00002. |
| C6680-60020 |
Glass Assembly - Scanner glass assembly - Glass plate on which the documents are placed to be scanned - Mounts in the scanner bezel |
| C6687A-Glass_Assy |
Glass Assembly - Main top copier glass assembly. |
| C4557-40013 |
Guide - Rear paper guide - Guides media through rear of printer |
| C4557-40020 |
Guide - Lower guide - Platform for seperator peg, spring and pad |
| C4557-40121 |
Guide - Encoder disk guide |
| C5870-40037 |
Guide - Length adjuster - Media input length adjuster |
| C6409-40022 |
Guide - Upper paper guide - Guides media through paper path |
| C6409-40034 |
Guide - Left wall pusher - Pushes against left side of media to maintain correct edge alignment |
| C6410-40005 |
Guide - Width adjust (Purple) - Holds media against right wall of input tray |
| C6687A-Guide_Paper |
Guide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken |
| C6680-40101 |
Hinge - Hinge - For the top cover (Document lid) on the scanner |
| C6687A-Hinge_Cvr |
Hinge - Single cover end M-Hinge Hinge is for top cover supporting opening and closing of the cover. Most covers use 2 hinges this price includes 1pc Hinge. |
| C6687A-Holder |
Holder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place. |
| C6680-60026 |
Idler - Scanner belt idler assembly - Maintains scanner belt tension |
| C6687A-Idler |
Idler - Scanner belt idler assembly - maintains scannter belt tension. |
| C6687A-Ink_DLVRY |
Ink Delivery System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly |
| C6687A-Ink_Supply_Station |
Ink Supply Station - Ink supply service station (iss) assembly |
| C6049A |
Iron On Transfers - Iron-On Transfers for DeskJet 2500C Series, HP DeskJet D1400 Printer Series, DeskJet D24XX Series, DeskJet F4180 Series |
| C6680-60071 |
Kit - Control panel (Keypad) assembly kit - Does NOT include cable |
| C4557-40042 |
Latch - Plastic latch (Y-shaped) |
| C4557-60045 |
Latch - Cartridge latch (Black) - Holds black ink cartridge in place |
| C4557-60046 |
Latch - Cartridge latch (Color) - Holds color ink cartridge in place |
| C6680-40053 |
Latch - Latch (Wavy slot) |
| C4557-00037 |
Lever - Pressure plate lever - Transfers upward pressure from the separator lifter to the kicker |
| C5870-40022 |
Lever - Paper pusher - Small, spring loaded lever attached to pivot - Pushes against left side of paper to maintain right edge alignment |
| C6411-40006 |
Lever - Banner lever - Used to choose either single sheet paper or continuous feed (Banner) paper |
| C6687A-Lid_Cover_Assy |
Lid Cover Assy - Top glass copier cover. Lid that pressed document onto the glass for copying or scanning document. |
| C4557-40063 |
Lifter - Separator lifter - Used to lift the separator peg |
| C4557-40084 |
Link - Pivot link for HP Color Copier 270 |
| C4557-40085 |
Link - Link pin for HP Color Copier 160 |
| C6429-60025 |
Link - Kicker bar cam link (spring loaded) |
| 6040-0788 |
Lubricant - Silicon Grease in a Syringe |
| C6688-60003 |
Module - Scanner module assembly - Moves along scanner slider rod to scan documents |
| C4557-60003 |
Motor - Carriage motor assembly (Includes pulley) |
| C5870-60004 |
Motor - Service station motor assembly - Includes PC board and gear |
| C6409-60004 |
Motor - Paper advance motor |
| C6680-60023 |
Motor - Motor and gear assembly - Drives scanner module - Does not include motor cable |
| C6687A-Motor_ADF |
Motor ADF - ADF motor unit - drives ADF rollers on the feeder assembly |
| C6687A-Motor_Carriage |
Motor Carriage - Carriage motor - motor that drives the carriage assembly |
| C6687A-Motor_Scanner |
Motor Scanner - Scanner unit motor - drives the scanner unit to scan documents to be copied, fax, or scanned. |
| C6687A-MTR_Srvce_Station |
Motor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly |
| C6680-60068 |
NamePlate - Nameplate - OfficeJet R40 series logo |
| C6687-60002 |
NamePlate - Nameplate - OfficeJet R40xi logo |
| C6687A-Overlay |
Overlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately. |
| C4557-80027 |
Pad - Length adjust pad (Poron) - Mounted under the fine length adjuster |
| C6687A-Pad_ADF |
Pad ADF - Pad separator - (located on ADF unit) assembled from plastic and rubber components; to help in separating sheet of media during faxing, scanning, or copying. |
| C6687A-Pad_Tray |
Pad Tray - Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing |
| C6426-60054 |
Pallet - Pallet/link assembly - Installed between spittoon and sled cap assembly - Mounting platform for the wiper and capping systems parts |
| C4557-40098 |
Panel - Paper tray left inner panel (left cheek cap) - Mounts between left wing and left outer panel |
| C4557-40099 |
Panel - Paper tray right inner panel (right cheek cap) - Mounts between right wing and right outer panel |
| C4557-40116 |
Panel - Paper tray left outer panel (left cheek) - Attaches to left edge of wing frame |
| C5870-40019 |
Panel - Paper tray panel (right cheek) - Attaches to the right edge of the wing frame |
| C6680-40021 |
Panel - Left side panel - Covers the left side of the print mechanism |
| C6680-40022 |
Panel - Right side panel - Covers the right side of the print mechanism |
| C6680-40026 |
Panel - Rear panel - Covers the back of the printer and the ground plane assembly |
| 51634Y |
Paper - HP Premium Inkjet Paper - A size (8.5 x 11-inches) - 200 sheets |
| 51634Z |
Paper - InkJet non-glossy LX paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package |
| C1812A |
Paper - Greeting card paper pack (White) - A size (8.5 x 11-inches) - Includes 20 sheets and 20 envelopes |
| C1820A |
Paper - Banner paper - A size (8.5 x 11-inches), 24 lb, perforated for easy separation - 100 sheets total per pack (5 stacks of 20 continuous sheets) |
| C1824A |
Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 500 sheets |
| C1825A |
Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 500 sheets |
| C1853A |
Paper - Premium InkJet Heavyweight Paper - A4 size (21.0cm x 29.7cm) - Coated on both sides - 100 sheets |
| C3833A |
Paper - Premium Glossy InkJet Paper - A size (8.5 x 11-inches) - 10 sheets |
| C5976A |
Paper - Bright white InkJet paper - A size (8.5 x 11-inches) - 200 sheets per package |
| C5976B |
Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 250 sheets |
| C5977A |
Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 200 sheets |
| C5977B |
Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 250 sheets |
| C6039A |
Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper |
| C6044A |
Paper - HP Photo Greeting Cards (Glossy) - A size (8.5 x 11-inches) - 10 scored half-fold glossy cards and envelopes |
| C6045A |
Paper - HP Photo Greeting Cards (Glossy) - A4 size (21.0cm x 29.7cm) - 10 scored half-fold glossy cards and envelopes |
| C6817A |
Paper - Brochure and flyer paper - Glossy on both sides - A size (8.5 x 11-inches), 98 brightness - 50 sheets |
| C6828A |
Paper - Greeting card paper pack (Ivory, Matte) - A size (8.5 x 11-inches) - Felt textured - Includes 20 sheets and 20 envelopes |
| C6831A |
Paper - HP Premium Plus Glossy Photo Paper - A size (8.5 x 11-inches) - 20 sheets |
| C6944A |
Paper - Premium Plus Paper (High Gloss) - 10.2cm (4in) x 15.2cm (6in) - 20 sheets |
| C6955A |
Paper - Professional Brochure and Flyer Paper (Matte) - A size (8.5 x 11-inches) - 50 sheets |
| C6979A |
Paper - Premium Photo Paper (Glossy) - A size (8.5 x 11-inches) - 50 sheets |
| C6983A |
Paper - Photo quality InkJet paper - With two sided semi-gloss finish - A size (8.5 x 11-inches) - 25 sheets per package |
| C7007A |
Paper - Photo Quality InkJet Paper (Matte) - With two sided matte finish - A size (8.5 x 11-inches) - 100 sheets |
| C7013A |
Paper - Colorfast photo paper - A size (8.5 x 11-inches) - 20 sheets per package |
| C7018A |
Paper - Photo Greeting Cards (White, Matte) - A size (8.5 x 11-inches), half fold, pre-scored - Includes 20 cards and 20 envelopes |
| C7019A |
Paper - HP Textured Half-fold Greeting Cards (White) - A size (8.5 x 11-inches) |
| C7020A |
Paper - Scored Tri-fold Brochure Paper (Glossy) - A size (8.5 x 11-inches) - 100 sheets |
| Q2509A |
Paper - Paper (Semi-Glossy) for DesignJet 130 Series, DeskJet 1220 Series, Business InkJet 2600 Series, DeskJet 450 Series |
| Q7852A |
Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper |
| C4557-40016 |
Paper Stacker - Kicker - Restacks paper in stack after top sheet is picked |
| C4557-60062 |
PC Board - Banner PCA and cable assembly |
| C6409-60200 |
PC Board - Paper encoder PCA - Controls operation of paper motor |
| C6409-60237 |
PC Board - Ink cartridge carriage PC board |
| C6680-60202 |
PC Board - Interconnect PC board |
| C6687A-PC_BRD |
PC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only |
| C7281-68001 |
PC Board - Main logic PC board |
| C6687A-PC_BRD_DC |
PC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board. |
| C5870-40029 |
Pin - Separator peg for HP DeskJet 895C |
| C6687A-Pinchwheel |
Pinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs |
| C6409-40028 |
Plate - Belt Attachment Plate - Mounted to back of Ink Cartridge Carriage Assembly - Used to attach the Carriage Drive Belt |
| C6429-60016 |
Plate - Shift Plate Assembly - Five Plastic Gears Held in a Two |
| C6455-60057 |
Plate - Shift plate assembly - Five plastic gears held in a two piece plastic frame - Attaches to feedroller assembly |
| 8120-6260 |
Power Cord - Power cord (Black) - 18 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for USA, Canada, Taiwan, Latin America, and Saudi Arabia) |
| 8120-6261 |
Power Cord - Power cord (Black) - 3-wire, 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240VAC in the United Kingdom, Hong Kong, Singapore, and Ireland) |
| 8120-6262 |
Power Cord - Power cord (Black) - 18 AWG, 3-wire, 1.0m (3.3ft) - Has straight (F) C13 receptacle (for 240VAC in Europe except for Denmark, Ireland, Switzerland) |
| 8120-8878 |
Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Argentina) |
| 8120-8879 |
Power Cord - Power cord (Black) - 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240V in Australia) |
| 8120-8880 |
Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Chile) |
| 8120-8881 |
Power Cord - Power cord (Black) - 17 AWG, three conductor, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Denmark) |
| 8120-8882 |
Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240VAC in the United Kingdom, Hong Kong, Singapore, and Ireland) |
| 8120-8883 |
Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220V in Israel) |
| 8120-8884 |
Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220V in Korea) |
| 8120-8885 |
Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Switzerland) |
| 8120-8886 |
Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240V in South Africa, Israel, and India) |
| 8121-0564 |
Power Cord - Power cord (Black) - 2.0m (6.6ft) long - Has straight (F) C13 receptacle (For 240V in India) |
| 8121-1003 |
Power Cord - Power cord (Black) - 3-wire, 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle - Opt919 (For 220V in Israel) |
| C6687A-Power_Cord |
Power Cord - Power module power cord- wall outlet cable to power module only. does not include power module. |
| 0950-3807 |
Power Module - Power module (worldwide/universal) - 100-240VAC input voltage, 50-60Hz - 18VDC output voltage, 40 watts - Requires a separate, detachable AC power cord with C13 connector |
| C6680-60079 |
Power Module - Power module kit with AC power cord |
| C6687A-Power_MDLE |
Power Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord |
| C6687A-Power_MDLE_Assy |
Power Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord |
| C6687A-Power_Supply |
Power Supply - Power supply board (internal pwr supply unit in the office machine). |
| C6687A-Power_Supply_BRD |
Power Supply Board - High voltage power supply board |
| C6687A-Print_Mchnsm |
Print Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables. |
| C6687A-Pulley |
Pulley - Paper pick up tray motor pulley. |
| C6687A-Pulley_ADF |
Pulley ADF - ADF feeder motor pulley |
| 5183-5268 |
Recovery Kit - Recovery Kit for DeskJet 1200 Series, DeskJet 850 Series, DeskJet 1000 Series, DeskJet 1100 Series |
| 5184-2833 |
Recovery Kit - Return kit - For returning defective Thermal InkJet (TIJ) 2.5 cartridges - Includes box and instructions |
| C6687A-Repair_InkJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| C4557-00024 |
Retainer - Ferrite retainer - Holds head drive flex cable ferrite |
| C4557-20026 |
Retainer - Felt retainer - Holds the lubricating felt to the side of the carriage |
| C6409-20004 |
Rod - Carriage rod - Shaft that the carriage assembly rides on - This item should be replaced only by trained, experienced service personnel |
| C6680-20070 |
Rod - Scanner slider rod - Scanner module moves along this rod |
| C6687A-Rod_Carriage |
Rod Carriage - Carriage rod - shaft that the carriage assembly rides on |
| C6687A-Rod_Scanner |
Rod Scanner - Scanner rod - shaft that the scanner assembly rides on |
| C4557-20002 |
Roller - Pinch roller - Provides downward pressure on media as it passes by upper paper guide |
| C4557-40015 |
Roller - Rear roller (Black) - Between paper and rear paper guide |
| C4557-60025 |
Roller - Pivot feed roller - Shaft with 4 hard rollers - Does not include other items such as gear or encoder |
| C5870-40030 |
Roller - Pivot assembly - Large plastic Item below the feed roller assembly - Picks and feeds media through print mechanism - Should be replaced only by experienced service personnel |
| C5870-60092 |
Roller - Pickup roller assembly - Shaft with large rollers, gear, and 2 bearings - Picks paper from paper input tray - Available for trade sales in Europe and Asia/Pacific - Available for authorized service centers only in USA |
| C6409-60037 |
Roller - Pivot feed roller assembly - Shaft with small rollers and paper encoder - This item should be replaced only by trained, experienced service personnel |
| C6426-60049 |
Roller - Pickup roller - Shaft with large rollers - Does not include other items such as gear or bearings |
| C6687A-Roller_ADF |
Roller ADF - Feeder ADF roller for picking up paper from ADF unit. |
| C6687A-Roller_Exit |
Roller Exit - Paper exit rollers - out put assembly. |
| C6687A-Roller_Pickup |
Roller Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray |
| C6687A-Scanner |
Scanner - Copier scanner (optical) assembly - includes scanner assembly only scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly. |
| C6687A-Scanner_Assy |
Scanner Assembly - Copier scanner & glass assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly. |
| C6687A-Scanner_Belt |
Scanner Belt - Scanner belt attaches from the scanner to the scanner motor. |
| C6687A-Scanner_Cable |
Scanner Cable - Flex circuit cable which connects to the scanner assembly. also known as flat cable, this cable moves along with the scanner unit (side to side) as it scans documents. |
| C6687A-Scanner_Motor |
Scanner Motor - Scanner driving motor |
| C6687A-Scanner_Unit |
Scanner Unit - Scanner unit includes the entire scanner base but not the ADF portion. |
| C6687A-Sensor_ADF |
Sensor ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly |
| C6687A-Sensor_Exit |
Sensor Exit - Exit media sensor sv |
| C6687A-Sensor_Open |
Sensor Open - Door sensor assembly - open door sensor |
| C6687A-Sensor_Out |
Sensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray |
| C6687A-Sensor_Spot |
Sensor Spot - Spot sensor assembly is attached to the carriage assembly. |
| C4557-60011 |
Separator - Separator pad for HP DeskJet 700 Series |
| C6687A-Separator |
Separator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays. |
| C6687A-Guide |
Service Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair. |
| C6680-10020 |
Service Manual - Service manual on CD-ROM for printer/scanner/copier 500 series, color copier 160/170/260/270 and OfficeJet R series |
| 0515-2199 |
Service Parts - Screw T8 4-20x6mm,Plas |
| 0515-2552 |
Service Parts - Screw,Plastic M4 |
| 0515-2849 |
Service Parts - Scr-M3x14 Taptite |
| 0515-2873 |
Service Parts - Screw-Sidecase |
| 0515-2898 |
Service Parts - Scr-M3x5 |
| 0515-2901 |
Service Parts - Scr-Tapping Assy |
| 0515-2902 |
Service Parts - Screw-Tapping |
| 0515-3002 |
Service Parts - Mech-Screw 2.5x0.45x6 |
| C2145-60040 |
Service Parts - X Bias Spring Assy |
| C4557-20025 |
Service Parts - Pin-X3 Datum |
| C4557-40006 |
Service Parts - New# C5870-40031 |
| C4557-60002 |
Service Parts - New Part#c6426-60049/Utg Pick Shaft Assy |
| C4557-60030 |
Service Parts - New#c6409-60200 Utg/Paper Encoder Pca |
| C4557-60086 |
Service Parts - New# C6426-60054 Pallet/Link |
| C5870-40031 |
Service Parts - Bearing-Feedroller |
| C5870-40051 |
Service Parts - Zassa |
| C6409-60002 |
Service Parts - Pca Crg |
| C6409-60038 |
Service Parts - Shift Plate Assy |
| C6409-60119 |
Service Parts - Order: C6429-60025 |
| C6409-60135 |
Service Parts - Order C6409-60236 |
| C6455-00011 |
Service Parts - Spring, Length Adjust |
| C6680-40140 |
Service Parts - Gr Plate |
| C6680-60021 |
Service Parts - Scn Module Assy |
| C6680-60028 |
Service Parts - New# C6680-60027 Foam Pad Assy |
| C6680-60029 |
Service Parts - New# C6680-60082 CONTROL PANEL |
| C6680-60060 |
Service Parts - Color Copy Target Rev B |
| C6680-60151 |
Service Parts - Pca, Inter Connect |
| C6680-60154 |
Service Parts - NEW# c6680-60197 MAIN PCA |
| C6680-60196 |
Service Parts - Wizard Main Pca |
| C6680-60197 |
Service Parts - Pca-Main |
| C6681-00001 |
Service Parts - Order: C6680-00020 |
| C6681-40002 |
Service Parts - New# C6682-60014 Hinge Lower |
| C6681-60033 |
Service Parts - New# C6682-60033/Ay, Lift Plate |
| C6682-60024 |
Service Parts - New# C6683-60025/Nameplate R60 |
| C6683-00020 |
Service Parts - Clip-Retainer Cable |
| C6685-60024 |
Service Parts - Left Wall Assy (Purple Paper Adj) |
| C6688A-UK3 |
Service Parts - Color Copier 170 |
| C6690-69003 |
Service Parts - Cc 1xx Exchange Unit |
| C7281-60005 |
Service Parts - Control Panel, Psc500 |
| C7281-60011 |
Service Parts - Control Panel, psc500 |
| C6687A-Service_Station |
Service Station - Service station assembly - for conditioning the printheads when the carriage is in its home position |
| C4557-20027 |
Shaft - Cartridge latch shaft near top of carriage |
| C4557-40066 |
Shaft - Drive shaft with molded gears on each end |
| C4557-00038 |
Shield - Paper motor ESD shield |
| C6680-00041 |
Shield - Main PC board shield (Upper) |
| C6680-60058 |
Shield - Main PC board shield (Lower) |
| C4557-60013 |
Sled - Sled cap assembly - Top cover of the service station assembly - Includes print cartridge caps (gaskets which keep the cartridges from drying out when not printing) |
| C6687A-SLED_Assy |
SLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly |
| C5870-40036 |
Slider - Integrated slider for carriage assembly |
| C6687A-Slider |
Slider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side. |
| C4557-40069 |
Snap - Cap snap - Installed between pallet/link assembly and sled cap assembly - Used to hold the cap spring |
| C4557-40150 |
Snap - Pivot snap - Used to hold pivot to pick feed roller shaft |
| C6687A-Speaker |
Speaker - Speaker assembly - includes speaker cable. |
| C5870-40014 |
Spitton - Spittoon base - The bottom of the service station assembly |
| C6687A-Spitton |
Spitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process |
| C2145-00033 |
Spring - ESD spring - Installed between ESD blade and carriage PC board |
| C4557-00009 |
Spring - Separator spring - Provides pressure between separator assembly and the center drive roller |
| C4557-00011 |
Spring - Drawer spring - Holds input drawer in place |
| C4557-00012 |
Spring - Right wing spring - Applies pressure to right wing during paper output |
| C4557-00017 |
Spring - Belt tension spring - Provides tension for carriage belt |
| C4557-00018 |
Spring - Encoder spring - Provides tension for encoder strip |
| C4557-00026 |
Spring - Cap spring - Provides upward pressure on the sled cap assembly to seal the parked print cartridges |
| C4557-00029 |
Spring - Left wall spring (front) - Holds left wall assembly in position |
| C4557-00030 |
Spring - Left wall spring (rear) - Provides pressure against media |
| C4557-00031 |
Spring - Paper length adjuster spring - Provides tension for paper input length adjuster |
| C4557-00033 |
Spring - Link spring - Provides tension to shaft of pick cam gear |
| C4557-00035 |
Spring - Paper pusher spring - Maintains alignment in paper tray |
| C4557-20003 |
Spring - Rear roller spring - Flexible axle for rear roller |
| C4557-20007 |
Spring - Pinch spring - Provides tension on upper paper guide |
| C4557-20009 |
Spring - Latch spring - Provides friction for the knob on the rear cleanout door assembly |
| C4557-20020 |
Spring - Envelope spring - Holds envelopes in position for picking |
| C4557-20024 |
Spring - Shifter spring - Provides tension on the pivot |
| C4557-20028 |
Spring - EOR tension spring - Maintains tension on wear strip |
| C5870-20002 |
Spring - Paper stacker (kicker) spring |
| C6409-00017 |
Spring - Wing torsion spring - Provides pressure on the wing during paper output |
| C6680-80020 |
Spring - Door spring - Connects to the pen access door and holds the door open when changing the print cartridges |
| C6680-80074 |
Spring - Idler spring - Provides tension for the scanner belt idler assembly |
| C6687A-Spring_Cmprsn |
Spring Compression - Compression spring - on pulley wedge, for carriage belt tension |
| C6822A |
Stickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet |
| C6823A |
Stickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet |
| C6410-40006 |
Stop - Fine paper length adjuster (Purple) - Holds paper firmly against the back of the paper input tray |
| C4557-80001 |
Strip - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position |
| C5870-00004 |
Strip - Wear strip - Long, spring loaded strip mounted in top of backbone - Used to ensure smooth ink cartridge carriage motion |
| C6409-00008 |
Support - Upper paper guide support - Base for upper paper guide |
| C6680-40009 |
Support - Glass assembly support - Retains the scanner glass inside the scanner bezel |
| C6687A-Trailing_Cbl |
Trailing Cable - Trailing cable for scanner - cable connects from scanner to pc board. |
| C4557-60049 |
Tray - Paper input tray pressure plate |
| C5870-40028 |
Tray - Paper input tray base - Does not include the pressure plate assembly |
| C6680-60078 |
Tray - Paper input tray assembly kit (Complete - Purple) - Plugs into front paper output tray assembly - Entire assembly |
| C5870-60081 |
Tray Assembly - Paper input tray assembly (partial) - Includes only base of tray and pressure plate assembly |
| C6410-60005 |
Tray Assembly - Paper input tray assembly (complete) - Entire assembly - Purple |
| C6411-60004 |
Tray Assembly - Paper tray left side assembly (Left cheek assembly) - Includes left cheek, banner PCA and cable assembly, banner switch lever |
| C6687A-Tray_Assy |
Tray Assembly - Paper input tray assembly for loading paper (bottom). |
| C6687A-Tray_Assy_CVR |
Tray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit. |
| C6687A-Tray_Base |
Tray Base - Tray base- bottom base of the paper input tray. |
| C4557-60109 |
Turnaround Assembly - Turnaround assembly - Provides carriage belt tension - Does not include spring |
| C4557-40068 |
Vent - Cap vent - For equalizing the print cartridge capping pressure |
| C4557-80002 |
Washer - Felt washer - Used to lubricate the carriage rod |
| C6687A-Window |
Window - Top/front access door assembly - print cartridge access door window. |
| C4557-40024 |
Wing - Left wing - Holds printed paper after being ejected |
| C4557-40025 |
Wing - Right wing - Holds printed paper after being ejected |
| C4557-60014 |
Wiper - Wiper assembly - Metal base with plastic wipers |
View service parts