| RB1-7293-000CN |
Arm - Paper exit sensor arm |
| RB1-7293-020CN |
Arm - Paper exit sensor arm |
| C3948-40010 |
Bezel - I/O bezel - I/O connector bezel |
| RB1-7184-000CN |
Bushing - Pickup roller bushing |
| RB1-7246-000CN |
Bushing - Pressure roller bushing |
| RB1-7288-020CN |
Bushing - Exit roller bushing |
| RB2-1690-000CN |
Bushing - Fuser exit roller bushing |
| 5063-1254 |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 3.0m (9.8ft) long -- Mini Connector |
| 5063-1255 |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long mini-connector. |
| 5064-3422 |
Cable - Telephone cable (Australia, New Zealand) |
| 8120-8668 |
Cable - IEEE 1284 Bi-Tronics parallel interface cable - DB-25 (M) connector (type A) to IEEE 1284C 36-pin (M) connector (type C) - 2.0m (6.6ft) long Miniconnector |
| 8121-0811 |
Cable - Telephone cable (2-wire) - RJ11 (M) connectors - 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal, and Spain) |
| 8121-1037 |
Cable - IEEE 1284 Bi-Tronics parallel interface cable - DB-25 (M) connector (type A) to IEEE 1284C 36-pin (M) connector (type C) - 2.0m (6.6ft) long |
| C2946A |
Cable - 8120-8724 IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin high density IEEE-1284C (M) connector (type C) - 3.0m (9.8ft) long mini connector. |
| C2947A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long |
| C3948-60102 |
Cable - Ribbon cable - Has 30-pin (M) connectors - 9.1cm (3.6in) long |
| C3948-60112 |
Cable - Telephone cable (Australia/Ireland) |
| C3948-60113 |
Cable - Telephone cable with ferrite - The wall socket end has both a 4-pin (M) connector and a 4-pin (F) tap - The other end has an RJ-ll (M) connector - 2.9m (9.7ft) long (United Kingdom) |
| C3948-60114 |
Cable - Telephone cable (Netherlands) |
| C3948-60115 |
Cable - Telephone cable (France) |
| C3948-60116 |
Cable - Telephone cable (Germany) |
| RG5-2029-000CN |
Cable - Cable assembly for HP LaserJet 5L Series |
| RG5-2032-000CN |
Cable - Cable assembly for HP LaserJet 5L Series |
| RG5-2033-000CN |
Cable - Cable assembly for HP LaserJet 5L Series |
| RG5-2035-000CN |
Cable - Cable assembly for HP LaserJet 5L Series |
| RG5-3661-000CN |
Cable - Cable assembly for HP LaserJet 6L Series |
| RG5-3662-000CN |
Cable - Cable assembly for HP LaserJet 6L Series |
| RG5-4233-000CN |
Cable - Cable assembly for HP LaserJet 3150 Series |
| RG5-4237-000CN |
Cable - Grounding cable - Document scanner grounding cable |
| RG5-4238-000CN |
Cable - CIS grounding cable - Scanner grounding cable |
| RH2-5346-000CN |
Cable - Ribbon cable - Has two 26-pin (M) edge connectors - 15.1cm (6.0in) long |
| 5184-5205 |
Cartridge - Black (Micro-Fine) toner (EP) cartridge - Will print approximately 2,500 pages based on a 5 percent print density |
| 6R908 |
Cartridge - 06a yield black toner |
| C3906A |
Cartridge - Black (Micro-Fine) toner (EP) cartridge - Will print approximately 2,500 pages based on a 5 percent print density |
| R74-7003-150 |
Cartridge - Epa yield black toner |
| WT2-0276-000CN |
Clamp - Wire clamp - Holds wire/cable in place |
| WT2-0367-000CN |
Clamp - Cable clamp - Holds cable in place |
| RB1-7223-000CN |
Clip - Pickup roller shaft grounding clip |
| RB1-7197-000CN |
Clutch - Clutch - On left side of pickup roller assembly shaft |
| RB1-7197-020CN |
Clutch - Clutch - On left side of pickup roller assembly shaft |
| VS1-5057-002CN |
Connector - Fuser electrical connector |
| VS1-7177-002CN |
Connector - Fuser electrical connector |
| RG5-4769-000CN |
Control Panel - Control panel assembly |
| RB1-7234-000CN |
Cover - Cap - Covers hole in chassis - Located on the front left side |
| RB2-3341-000CN |
Cover - Right side chassis cover |
| RB2-3345-000CN |
Cover - Engine self test switch cover |
| RB2-3349-000CN |
Cover - Bottom front cover |
| RB2-3360-000CN |
Cover - Left back side chassis cover |
| RB2-3361-000CN |
Cover - Back side chassis cover |
| RB2-3450-000CN |
Cover - Top front chassis cover |
| RB2-3451-000CN |
Cover - Front left side chassis cover |
| RB2-3452-000CN |
Cover - Pressure release lever cover - Paper jam release lever |
| RB2-3468-000CN |
Cover - Left side printer door hinge cover |
| RB2-3469-000CN |
Cover - Right side printer door hinge cover |
| RG5-3474-020CN |
Delivery - Delivery assembly - Attaches to the lower center area of the internal chassis - Includes four White 'multi-ridged' and two other delivery rollers and their associated springs |
| RG5-4770-000CN |
Door - Printer door assembly |
| RG5-3485-030CN |
Feeder - Feed assembly - Has idler roller, sensor flag and paper input sensor |
| RF5-2663-000CN |
Foot - Rubber foot - Replacement rubber foot for the bottom support (four used) |
| RB1-7177-000CN |
Frame - Paper feed frame - Main frame that parts such as pickup roller assembly and separation pad are installed on |
| RG5-4678-000CN |
Fuser Assembly - Heating element assembly (For 100V to 120V operation) - Bonds the toner to the paper with heat |
| RG5-4681-000CN |
Fuser Assembly - Heating element assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat |
| RS5-0796-000CN |
Gear - Pressure roller shaft gear |
| RY7-5005-000CN |
Gear - Gear kit - Includes first five gears on front left side area of the internal chassis - Gear kit #1 |
| RY7-5007-000CN |
Gear Assembly - Fuser release assembly - Gear/tab assembly on left side of internal main chassis - Includes housing, two gears, and fuser release tab |
| RY7-5036-000CN |
Gear Assembly - Gear kit #3 - Includes first four gears driven by main motor |
| RB1-7129-000CN |
Ground - Case grounding strap (metal) |
| RB1-7130-000CN |
Guide - Fuser cable guide |
| RB1-7176-000CN |
Guide - Sheet guide - Mylar strip paper guide |
| RB1-7247-000CN |
Guide - Fusing assembly paper guide |
| RB1-7341-000CN |
Guide - Right side toner cartridge guide |
| RB2-3350-000CN |
Guide - Formatter cable guide |
| RB2-3365-000CN |
Guide - Sheet arching guide - 2 used - Mylar strips that direct paper to output bin |
| RB2-3401-000CN |
Guide - Duct 1 - For Paper output and aids in cooling |
| RB2-3401-040CN |
Guide - Duct 1 - For Paper output and aids in cooling |
| RB2-3402-000CN |
Guide - Duct 2 - Helps provide heat dissipation |
| RB2-3409-000CN |
Guide - Cable guide for HP LaserJet 3100 Series |
| RB2-3436-000CN |
Guide - Document scanner guide |
| RF5-1514-000CN |
Guide - Left side toner cartridge guide - Back half of guide |
| RF5-1515-000CN |
Guide - Right side toner cartridge guide - Back half of guide |
| RF5-1533-000CN |
Guide - Pressure roller ground guide - Protects pressure roller ground cable |
| RF5-2358-000CN |
Guide - Transfer roller guide |
| RG5-3452-000CN |
Guide - Transfer guide assembly (Ribbed plastic piece) - Mounting support for the transfer roller |
| RG5-3475-000CN |
Guide - Separation guide assembly - Includes the face-up/face-down paper selection lever/deflector and fusing assembly exit roller assembly |
| RG5-3478-000CN |
Guide - Paper guide - Inside spur assembly |
| RG5-3479-000CN |
Guide - Paper guide - Outside spur assembly |
| RG5-4768-000CN |
Guide - Upper paper guide - Guides paper through scanner path |
| WT2-5178-000CN |
Guide - Cable guide - For the control panel cable |
| WT2-5498-000CN |
Guide - Frame cable guide |
| HB1-2895-000CN |
Holder - Document scanner separation pad holder |
| RB1-7107-000CN |
Holder - Gear holder - For gear kit #1 |
| RB2-3366-000CN |
Holder - Formatter cable guide holder |
| RB2-3465-000CN |
Holder - Left side hinge holder |
| RB2-3466-000CN |
Holder - Right side hinge holder |
| RG5-3453-000CN |
Interlock - Interlock assembly - Detects if EP (Toner) door is open |
| C4256-60107 |
Kit - LaserJet 3100/3150 CD-ROM - Service/support training and documentation on CD-ROM - All tests via the WEB |
| RG5-3497-000CN |
Laser Scanner - Laser/scanner assembly |
| RB1-7185-000CN |
Leg - Left leg - Small leg on left side of paper kick plate |
| RB1-7186-000CN |
Leg - Right leg - Small leg on right side of paper kick plate |
| RB1-7105-000CN |
Lever - Fuser release lever - Part of fuser release assembly |
| RB2-3448-000CN |
Lever - Paper path lever - Selects `In Order` or `Straight Thru` |
| RG5-3476-000CN |
Lever - Face-up/face-down shaft and media deflector |
| CK-8006-000CN |
Lubricant - Grease for HP LaserJet 5L Series |
| H3975-60001 |
Maintenance Kit - Maintenance Kit (120V) - Includes fuser, separation pad kit, transfer roller, pickup roller, exit roller assembly, and idler roller - Procedure may require service manual (sold separately). |
| H3975-60002 |
Maintenance Kit - Maintenance Kit (220V) - Includes fuser, separation pad kit, transfer roller, pressure roller, pickup roller, exit roller assembly and idler roller - Procedure requires service manual |
| 5851-1891 |
Manual - LaserJet quick reference service guide (monochrome) - Volume IV |
| C4256-90904 |
Manual - LaserJet 3150 users manual (French) |
| C4256-90915 |
Manual - LaserJet 3150 users manual (Nordic) |
| C4256-90952 |
Manual - LaserJet 3150 users manual (English) |
| C4256-90956 |
Manual - Manual for LaserJet 3100 Series, LaserJet 3150 Series |
| RH7-1320-000CN |
Motor - HP Motor for LaserJets |
| RH7-1376-000CN |
Motor - Scanner motor for HP LaserJet 3150 Series |
| RB2-3346-000CN |
Mount - Speaker mount/cover |
| RB2-3393-000CN |
Overlay - Keypad overlay - Allows customer to notate specific fax numbers to the one touch keypad |
| RB2-3430-000CN |
Pad - Separation pad - Document scanner separation pad onlyholder and frame are on the scanner unit. |
| RB2-4114-000CN |
Pad - Backing pad - Plastic backing support for separation pad |
| RY7-5077-000CN |
Pad - Printer separation pad kit - Includes main pad, spring, and two smaller subpads - Also order pickup roller assembly (RY7-5008-000CN) |
| C3948-60001 |
PC Board - LIU - Phone line input unit - US only |
| C3948-60002 |
PC Board - LIU - Phone line input unit - World wide unit |
| C3949-60002 |
PC Board - Formatter (Main Logic) board |
| C3949-69002 |
PC Board - Formatter (Main Logic) board |
| RG5-4690-000CN |
PC Board - ECU board - Engine controller unit/power system controller board - Logic and power supply combined PCA - 110V |
| RG5-4691-000CN |
PC Board - ECU board - Engine controller unit/power system controller board - Logic and power supply combined PCA - 220V |
| RG5-3484-070CN |
Pickup Assembly - Paper pickup assembly |
| RB2-1632-000CN |
Plate - Gear support plate - For gear kit #2 |
| RB2-3342-000CN |
Plate - Chassis bottom plate |
| RB2-3364-000CN |
Plate - Formatter board mounting plate |
| RB2-3467-000CN |
Plate - Grounding plate - Chassis ground clips |
| RB2-4118-000CN |
Plate - Grounding plate - Chassis ground for back plate |
| RF5-1517-000CN |
Plate - Fuser pressure plate - Guides paper over fuser roller |
| RF5-2372-000CN |
Plate - Paper kick plate (middle) |
| 8120-6809 |
Power Cord - Power cord (Dove Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in the U.K., Hong Kong, Singapore, Malaysia) |
| 8120-6810 |
Power Cord - Power cord (Flint Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in Australia, New Zealand) |
| 8120-6811 |
Power Cord - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 220V in Europe, Saudi Arabia, South Africa, India, and Korea) |
| 8120-6812 |
Power Cord - Power cord (Flint Gray) - 18 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 120VAC in the United States, Canada, Mexico, Philippines, and Taiwan) |
| 8120-6813 |
Power Cord - Power cord (Dove Gray) - Three Conductor, 2.3M (7.5ft) long - Has straight (F) C13 receptacle (For 240VAC in the United Kingdom, Hong Kong, Singapore, Malaysia) |
| 8120-6814 |
Power Cord - Power cord (Flint Gray) - 17 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 220VAC in Denmark) |
| RB1-7334-000CN |
Protector - Jam prevention protector - Installs in the delivery assembly - Allows paper jams to be cleared without damaging the printer |
| C7083A-Repair_LaserJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| RB1-7226-000CN |
Roller - Idler roller - Shaft with roller on both ends - Part of feed assembly |
| RB1-7284-000CN |
Roller - Delivery roller #1 - White 'Multi-ridged' roller - Four are used in delivery assembly |
| RB2-1634-000CN |
Roller - Paper pickup roller for unit. This is the roller that goes on the paper pick up roller shaft - shaft roller assembly that feeds paper from paper input assembly. Roller only. (shaft and roller see part number RG5-3486-040CN) |
| RB2-1685-000CN |
Roller - Delivery roller #2 |
| RB2-1699-000CN |
Roller - Idler roller for feed assembly |
| RF5-1534-000CN |
Roller - Transfer roller - Located underneath toner (EP) cartridge |
| RF5-2364-000CN |
Roller - Pressure roller - Shaft/roller with gear on left side of roller located underneath the heating element |
| RF5-2365-000CN |
Roller - Pressure roller - Shaft/roller with gear on left side of roller located underneath the heating element |
| RF5-2367-000CN |
Roller - Exit roller assembly - Shaft with four black rollers - Rollers are aligned with and work in conjunction with the white 'Multi-ridged' rollers of the delivery assembly |
| RF5-2368-000CN |
Roller - Fuser exit roller assembly - Shaft and rollers - Attaches to separation guide assembly |
| RG5-3486-040CN |
Roller - Pickup roller assembly - Shaft/roller assembly that feeds paper from paper input assemblies - Also order separation pad kit |
| RG5-4772-000CN |
Roller - Paper pickup roller assembly for document scanner |
| RG5-4239-000CN |
Scanner - Contact image sensor assembly - Scanner LED |
| RG5-4771-000CN |
Scanner - Document scanner assembly - Includes motor, rollers and guides - Does NOT include image sensor assembly |
| RY7-5009-000CN |
Sensor - Paper sensor flag/arm - Detects leading and trailing edges of paper |
| RF5-1492-000CN |
Separator - HEWLETT PACKARD LaserJet sub pad assembly right and left pads. |
| RY7-5055-000CN |
Separator - Scanner separation pad kit - Kit includes separation pad, separation backing pad and separation pad holder |
| C7083A-Manual_Laser |
Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. |
| RG5-1947-000CN |
Shaft - Idler roller shaft assembly |
| C3948-00002 |
Shield - RFI shield for HP LaserJet 3100 Series |
| RF5-2664-000CN |
Shield - Back shield - Reinforcement plate |
| C5316-80011 |
Sleeve - Document carrier sleeve - 2 full size and 2 half size sleeves - Sleeve sealed on three sides |
| RB2-3351-000CN |
Sleeve - Cable sleeve - Protective tube for control panel cable |
| C6072-60304 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (German) |
| C6072-60305 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (French) |
| C6072-60306 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Spanish) |
| C6072-60307 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Italian) |
| RH7-5139-000CN |
Solenoid - Paper pickup solenoid |
| RB2-3347-000CN |
Spacer - ECU PC board spacer between PC board and bottom plate |
| RB2-3454-000CN |
Spacer - Spacer - Between cable guide and printer door on left side |
| RH6-3845-000CN |
Speaker - Speaker for HP LaserJet 3100 Series |
| RB1-7172-000CN |
Spring - Grounding spring - Grounds kick plate |
| RB1-7199-000CN |
Spring - Grounding spring - Grounds transfer guide |
| RB1-7286-000CN |
Spring - Spring - Used with the #1 delivery rollers |
| RB1-7287-000CN |
Spring - Spring - Used with the #2 delivery rollers (two used) |
| RB1-7294-000CN |
Spring - Spring - For paper exit sensor arm |
| RS5-2501-000CN |
Spring - Spring - Located underneath paper kick plate |
| RS5-2508-000CN |
Spring - Compression spring - Provides tension for pressure plate |
| RB2-3354-000CN |
Strap - Door strap - ADF door support |
| RB1-7255-000CN |
Support - Left side pressure roller support |
| RB1-7256-000CN |
Support - Right side pressure roller support |
| RB2-3581-000CN |
Torque Limiter - Torque limiter - Limits rotation of feed rollers |
| RB2-3362-000CN |
Tray - Printer paper input tray - Rear paper input support |
| RB2-3410-000CN |
Tray - Printer paper output tray - Behind scanner input support |
| RB2-3455-000CN |
Tray - ADF input tray - Automatic document feeder input support |
| RB2-3470-000CN |
Tray - ADF output paper tray - Automatic document output support |
| RG5-3488-000CN |
Tray - Input bin assembly - Paper input supply bin |
| RG5-4763-000CN |
Tray - Single sheet input slot - Manual feed tray |
Techical Help
View service parts