| C8157-67037 |
Absorber - Absorber base - Foam to absorb ink spillage from service station |
| C8159A-Absorber |
Absorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters. |
| C8159A-AC_Adapter |
AC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached. |
| C8159A-Actuator |
Actuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm). |
| C8159A-ADF_Arm |
ADF Arm - Senses paper in the ADF area tray / feeder tray. this is a front flapper arm - part of the paper separation mechanism for the paper pickup assembly - mounts just in front of the front separation belts in the ADF assembly. |
| C8159A-ADF_Feed_Assy |
ADF Feed Assembly - ADF assembly - does not include ADF input tray. ADF assembly includes the complete ADF assembly (motor, gears, rollers, sensor, does not include the ADF pad or plastic flatbed cover. (for entire unit please see ADF unit assembly). |
| C8159A-ADF_Input_Tray |
Adf Input Tray - ADF tray ( for automatic document feeder) this is where papers are placed for feeding into unit. |
| C8159A-ADF_Motor |
ADF Motor - ADF motor - the scanner ADF motor is located on left rear corner of ADF drive, location varies from each unit. however, this is the main motor on the ADF unit. |
| C8159A-ADF_Output_Tray |
ADF Out Put Tray - ADF out put tray is where paper come out of ADF (automatic document feeder). For this unit, we will ship the entire ADF Assembly. |
| C8159A-ADF_Pad |
ADF Pad - ADF paper seperation pad assembly - mounts in the center of the ADF separation pad frame assembly. this pad prevents from multiple feeding or preventing paper jams while faxing, scanning, or copying. |
| C8159A-ADF_PC_BRD |
ADF PC Board - Control Board on the ADF unit |
| C8159A-ADF_Roller_Kit |
ADF Roller Kit - ADF upper pick roller replacement kit. these are the rollers that feed paper into the feeder to be scan, copy, or faxed. |
| C8159A-ADF_Scanner |
ADF Scanner - ADF scanner (optical) assembly - includes the chassis assembly, scanner lens assembly (includes the charge coupled device (ccd)), the scanning lamp, ADF analog processor board, and ADF inverter board - this is the assembly that scans, copies documents. |
| C8159A-ADF_Sensor_BRD |
ADF Sensor Board - ADF sensor pc board assembly - narrow strip pc board with the two document skew sensors, registration sensor, and timing sensor - mounts on top of the registration guide assembly in the ADF main assembly |
| C8159A-ADF_Unit_Assy |
ADF Unit Assembly - Complete replacement assembly unit for Officejet Copier, top assembly only. This includes the ADF (automatic document feeder) for this unit. |
| C8159A-Arm_Delivery |
Arm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm |
| C8159A-Arm_Door |
Arm Door - Carriage access door sensor arm |
| C8159A-Arm_Pickup |
Arm Pick Up - Paper detection arm - for registration plate on picking up paper |
| C8159A-Arm_Plate |
Arm Plate - Lever arm - used to lift the pressure plate lifter |
| C8159A-Arm_Sensing |
Arm Sensing - Arm assembly senses paper in bottom tray |
| C8159A-Arm_Tension |
Arm Tension - Tension arm - maintains tension on carriage belt |
| C8157-67040 |
Base - Carriage base assembly - Electronic PCA and optical sensor (Operating voltages 32v, 5v, and 3.3v) - Holds print cartridges and moves them across paper to enable printing (Does NOT include belt) |
| C8159A-Battery |
Battery - Battery pack for hp printer |
| C8157-67039 |
Belt - Carriage belt - Plastic/rubber toothed belt for transferring mechanical power from motor to carriage |
| C8159A-Belt_ADF |
Belt ADF - Transport belt motor - provides the drive to transport paper through the ADF unit. this belt goes in the ADF assembly drive unit |
| C8159A-Belt_Carriage |
Belt Carriage - Carriage belt - moves the carriage assembly across the carriage rod |
| C8159A-Belt_Duplex |
Belt Duplex - Duplex timing belt - small belt that goes on the duplexer unit |
| C8159A-Belt_Paper |
Belt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly. |
| C8159A-Belt_Scanner |
Belt Scanner - Scanner assembly belt. belt moves the scanner while copying or scanning documents. |
| C8159A-Bezel |
Bezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel |
| C8159A-Bracket_Left |
Bracket Left - Left bracket - carriage rod adjustment bracket (left) |
| C8159A-Bracket_Right |
Bracket Right - Right bracket - carriage rod adjustment bracket (right) |
| C8159A-Bracket_Tension |
Bracket Tension - Belt tension bracket - holds the carriage belt idler pulley |
| 8121-0868 |
Cable - Universal Serial Bus (USB) interface cable (Black) - Type 'A' connector to type 'B' connector - 1.83m (6.0ft) long |
| C6518A |
Cable - Universal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long |
| C8157-67041 |
Cable - Trailing cable assembly - Flat ribbon cable (Signal and Power, Voltages 32v, 3.3v, 5v) - Enables electrical signal transmission between carriage and main PCA |
| C8157-67068 |
Cable - Ethernet crossover cable |
| C8157-67069 |
Cable - Universal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long |
| C8157-69069 |
Cable - Universal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long |
| Q1647-80001 |
Cable - Scanner trailing cable - Connect the scanner assembly to the main logic PC board |
| C8159A-Cable_Carriage |
Cable Carriage - Cable assembly which connects the main logic board to the carriage motor |
| C8159A-Cable_Interface |
Cable Interface - Parallel cable - connects from your printer to computer via your parallel port. |
| C8159A-Cable_Mchnsm |
Cable Mechanism - Cable assembly which connects the main logic board to the print mechanism |
| C8159A-Cable_Panel |
Cable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display. |
| C8159A-Cable_USB |
Cable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing. |
| C8157-67056 |
Cage - PCA cage - Metal casing to house the PCA logic board |
| C8157-67057 |
Cage - PCA cage plate - Metal casing to house the PCA logic board |
| C8159A-Cam |
Cam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position |
| C8159A-Cap_Lifter |
Cap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place. |
| C8159A-Carriage_Assy |
Carriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider. |
| C8159A-Carriage_Base |
Carriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base |
| C8159A-Carriage_Belt |
Carriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting. |
| C8159A-Carriage_Cable |
Carriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side). |
| C8159A-Carriage_Latch |
Carriage Latch - A-arm latch - retains latch over the printheads on the carriage |
| C8159A-Carriage_Latch_CVR |
Carriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle. |
| C8159A-Carriage_Motor |
Carriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement. |
| C8159A-Carriage_Only |
Carriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly). |
| C8159A-Carriage_PC_BRD |
Carriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it. |
| 5069-7161 |
Cartridge - Thermal InkJet 4.0 ink cartridge return kit (10x12 bag) (United States) |
| C9385AE |
Cartridge - HP 88 Black Ink Cartridge - Print cartridge volume 20.5ml (Europe) |
| C9385AL |
Cartridge - HP 88 Black Ink Cartridge - Print cartridge volume 20.5ml (Latin America) |
| C9385AN |
Cartridge - HP 88 Black Ink Cartridge (C9385AN) |
| C9386AE |
Cartridge - HP 88 Cyan Ink Cartridge - Print cartridge volume 9.0ml (Europe) |
| C9386AL |
Cartridge - HP 88 Cyan Ink Cartridge - Print cartridge volume 9.0ml (Latin America) |
| C9386AN |
Cartridge - HP 88 Cyan Ink Cartridge (C9386AN) |
| C9387AE |
Cartridge - HP 88 Magenta Ink Cartridge - Print cartridge volume 9.0ml (Europe) |
| C9387AL |
Cartridge - HP 88 Magenta Ink Cartridge - Print cartridge volume 9.0ml (Latin America) |
| C9387AN |
Cartridge - HP 88 Magenta Ink Cartridge (C9387AN) |
| C9388AE |
Cartridge - HP 88 Yellow Ink Cartridge - Print cartridge volume 9.0ml (Europe) |
| C9388AL |
Cartridge - HP 88 Yellow Ink Cartridge - Print cartridge volume 9.0ml (Latin America) |
| C9388AN |
Cartridge - HP 88 Yellow Ink Cartridge (C9388AN) |
| C9391AE |
Cartridge - HP 88 Large Cyan Ink Cartridge - Print cartridge volume 17.ml (Europe) |
| C9391AL |
Cartridge - HP 88 Large Cyan Ink Cartridge |
| C9391AN |
Cartridge - HP 88XL Cyan Ink Cartridge (C9391AN), High Yield |
| C9392AE |
Cartridge - HP 88 Large Magenta Ink Cartridge - Print cartridge volume 17.ml (Europe) |
| C9392AL |
Cartridge - HP 88 Large Magenta Ink Cartridge |
| C9392AN |
Cartridge - HP 88XL Magenta Ink Cartridge (C9392AN), High Yield |
| C9393AE |
Cartridge - HP 88 Large Yellow Ink Cartridge - Print cartridge volume 17.ml (Europe) |
| C9393AL |
Cartridge - HP 88 Large Yellow Ink Cartridge |
| C9393AN |
Cartridge - HP 88XL Yellow Ink Cartridge (C9393AN), High Yield |
| C9396AE |
Cartridge - HP 88 Large Black Ink Cartridge - Print cartridge volume 58.9ml (Europe) |
| C9396AL |
Cartridge - HP 88 Large Black Ink Cartridge |
| C9396AN |
Cartridge - HP 88XL Black Ink Cartridge (C9396AN), High Yield |
| PRM9393AN |
Cartridge - Hi yeild yellow ink |
| C8157-67014 |
Case - Main printer case |
| C8157-67018 |
Case - Printer base - Forms the base of the printer with the right and left walls (does NOT include picking mechanism, service station, carriage, or PCA) |
| C8159A-Chassis |
Chassis - Chassis assembly - the large plastic item that forms the base of the print mechanism |
| C8159A-Clutch_ADF |
Clutch ADF - ADF paper clutch unit. clutch that controls movement on the ADF feeder |
| C8159A-Clutch_Feed |
Clutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit. |
| C8159A-Control_Panel |
Control Panel - Control panel assembly - control buttons and display on top front of the unit. |
| C8157-67006 |
Cover - Rail adjustment cover - removable cover that allows access to the rail adjuster |
| C8157-67009 |
Cover - Cover for printer - Provides access to areas of printer for changing the printhead |
| C8157-67010 |
Cover - Right cover panel - Base and DTN models |
| C8157-67011 |
Cover - Right cover panel - DTWN model |
| C8157-67012 |
Cover - Rear printer cover |
| C8157-67013 |
Cover - Left printer cover |
| C8159A-Cover_Back |
Cover Back - Back cover of printer, it is usually removed to clear paper jams. |
| C8159A-Cover_Cartridge |
Cover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves. |
| C8159A-Cover_Main |
Cover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off. |
| C8159A-Deflector |
Deflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly |
| C8159A-Display |
Display - Status led display (LCD display assembly). |
| C8157-67007 |
Door - IDS door - Provides access to areas of printer for changing ink supplies |
| C8157-67008 |
Door - Door - Main printer door |
| C8159A-Door_Carriage |
Door Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open. |
| C8159A-Door_Cartridge |
Door Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door. |
| C8159A-Door_Rear |
Door Rear - Rear cleanout door assembly - rear paper jam clean out door assembly. |
| C8159A-Drive_Assy |
Drive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring. |
| C8159A-Drive_Assy_ADF |
Drive Assy ADF - Media chassis assembly (paper drive) - moves paper from ADF assembly to scanner assembly - includes media chassis, rollers, gears, flag, sensor, deflector, cable, springs |
| C8157-67020 |
Duplexer - Duplexer - Allows printing on both sides of paper - Provides access for paper jam clearance - Helps with print output handling |
| C8159A-Duplexer |
Duplexer - Auto duplexer assembly - provides double sided printing capability |
| C8255-60001 |
Duplexer - HP automatic 2-sided printing accessory |
| C8255A |
Duplexer - HP automatic 2-sided printing accessory |
| C8157-67030 |
Encoder - Encoder disk - Plastic disk part - Helps to provide position information of the paper |
| C8157-67033 |
Encoder - Encoder strip - Plastic ribbon part - Helps to provide position information of the carriage to the main PCA |
| C8159A-Encoder |
Encoder - Encoder spring - provides tension for encoder strip |
| C8159A-Encoder_Disk |
Encoder Disk - Disk encoder - helps to provide position information of the paper |
| C8159A-Encoder_Strip |
Encoder Strip - Encoder strip - carriage position sensor reference |
| C8159A-Extender_ADF |
Extender ADF - Paper extension for the automatic document feeder (ADF) input tray |
| C8159A-Extender_Input |
Extender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths |
| C8159A-Extender_Output |
Extender Output - Paper exit tray extension |
| C8159A-Fan_PC_BRD |
Fan PC Board - Fan to cool power supply unit |
| C8159A-Fan_Vaccum |
Fan Vaccum - Vacuum fan assembly |
| C8159A-Feed_Rollers |
Feed Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk |
| C8159A-Feed_Rollers_ADF |
Feed Rollers ADF - ADF feed roller kit - includes all rollers that feed paper through the feeder. |
| C8159A-Flag_ADF |
Flag ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounths on the front frame of the ADF paper pickup assembly |
| C8159A-Flag_Paper |
Flag Paper - OOPS flag - out of paper sensor |
| C8157-67044 |
Foam - Carriage felt - Foam with lubricant for the carriage rod |
| C8157-67067 |
Foam - Carriage cusion contraint - Small piece of foam, part of packaging material for printer |
| C8159A-Formatter |
Formatter - Formatter board assembly, this board communicates with your computer device and has MAC port connector. |
| C8159A-Front_Panel |
Front Panel - Front panel assembly - includes lcd and actuator buttons |
| C8159A-Gear_Assy |
Gear Assembly - ADF gear assembly driven by ADF main motor |
| C8159A-Gear_Cluster |
Gear Cluster - Cluster gear, large gear on service station |
| C8159A-Gear_Double |
Gear Double - Transfer gear - has double gear attached on service station |
| C8159A-Gear_Main |
Gear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller. |
| C8159A-Gear_Station |
Gear Station - Gears on shaft of spittoon station |
| C8159A-Glass_ADF_Window |
Glass ADF Window - Small glass piece used when scanning - copying - faxing with ADF feeder for this unit will ship Q5888-00002. |
| C8159A-Glass_Assy |
Glass Assembly - Main top copier glass assembly. |
| C8157-67029 |
Guide - Lower paper guide assembly - Molded plastic part guides the paper during paper advancement |
| C8159A-Guide_Paper |
Guide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken |
| C8157-67027 |
Hanger - Hanger assembly - Stamped steel part used to hold the casings |
| C8157-67051 |
Harness - Wiring harness - (Power supply to main logic PCA) - Electrical wires with plastic connectors; Enables transmission of electrical signals |
| C8157-67059 |
Harness - Drop detector wiring harness - Wires with connectors that connect to the drop detector |
| C8157-67060 |
Harness - Main wiring harness - Electrical wires with plastic connectors - Enables transmission of electrical signals |
| C8157-67061 |
Harness - Motor wiring harness - Electrical wires with plastic connectors (signal and power voltages 5v, 12v, 32v) - Enables transmission of electrical signals |
| C8159A-Hinge_Cvr |
Hinge - Single cover end M-Hinge, Hinge is for top cover supporting opening and closing of the cover. Most covers use 2 hinges, this price includes 1pc Hinge. |
| C8159A-Holder |
Holder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place. |
| C8159A-Idler |
Idler - Scanner belt idler assembly - maintains scannter belt tension. |
| C8157-67034 |
Ink Delivery System - IDS replacement assembly - Feeds ink from ink cartridges to printheads |
| C8159A-Ink_DLVRY |
Ink Delivery System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly |
| C8157-67036 |
Ink Supply Station - Ink supply station assembly - Includes motor (output voltage 17v, input voltage 32v) - Holds the ink cartridges and pumps ink through the IDS into the printheads |
| C8159A-Ink_Supply_Station |
Ink Supply Station - Ink supply service station (iss) assembly |
| J7942-61041 |
JetDirect - HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector |
| C8157-67064 |
Label - Label - Serial number label |
| C8157-67065 |
Label - Label - Wireless MAC ID label |
| C8157-67066 |
Label - Label - Ethernet MAC address label |
| C8159A-Lid_Cover_Assy |
Lid Cover Assy - Top glass copier cover. Lid that pressed document onto the glass for copying or scanning document. |
| C8157-67045 |
Motor - Carriage motor assembly - Motor that drives the carriage assembly during printing |
| C8157-67062 |
Motor - Bracket motor assembly - Includes motor (rated operating voltage 19v) and two sensors(output voltage 5v, input voltage 5v) - Drives the linefeed rollers to advance the paper during printing |
| C8159A-Motor_ADF |
Motor ADF - ADF motor unit - drives ADF rollers on the feeder assembly |
| C8159A-Motor_Carriage |
Motor Carriage - Carriage motor - motor that drives the carriage assembly |
| C8159A-Motor_Scanner |
Motor Scanner - Scanner unit motor - drives the scanner unit to scan documents to be copied, fax, or scanned. |
| C8159A-MTR_Srvce_Station |
Motor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly |
| 6040-0990 |
Oil - Special lubricating oil - For carriage slider rod surface - (5cc oil) |
| C8159A-Overlay |
Overlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately. |
| C8157-67032 |
Pad - Pad separator - Assembled from plastic and rubber components - Assists in separating sheets of media during printing |
| C8159A-Pad_ADF |
Pad ADF - Pad separator - (located on ADF unit) assembled from plastic and rubber components; to help in separating sheet of media during faxing, scanning, or copying. |
| C8159A-Pad_Tray |
Pad Tray - Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing |
| C1820A |
Paper - Banner paper - A size (8.5 x 11-inches), 24 lb, perforated for easy separation - 100 sheets total per pack (5 stacks of 20 continuous sheets) |
| HPA510 |
Paper - Everyday Copy and Print Paper - A size (8.5 x 11-inches) - 500 Sheets per package |
| HPM1120 |
Paper - HP Multipurpose Paper - A size (8.5 x 11-inches) - 500 sheets |
| HPP1122 |
Paper - HP Printing Paper - A size (8.5 x 11-inches) - 500 sheets |
| Q1429A |
Paper - Paper (Glossy) for DesignJet 5000 Series, DesignJet 500, DesignJet 800 Series, OfficeJet Pro K550 Series |
| Q1977A |
Paper - Paper (Glossy) for Deskjet 460 Series, OfficeJet Pro K550 Series, Business Inkjet 2800 Series, DeskJet 9800 |
| Q1988A |
Paper - Paper (Glossy) for PhotoSmart 420 Series, HP Photosmart 422 Portable Photo Studio, PhotoSmart 475 Series, Photosmart 475 series compact photo printer |
| Q2506A |
Paper - Premium Plus Photo Paper (Satin Matte) - 10.2cm (4in) x 15.2cm (6in) finished size - 10.2cm (4in) x 16.5cm (6.5in) with tab - 60 sheets |
| Q5458A |
Paper - Paper (Glossy) for DeskJet 300, DeskJet 640 Series, Designjet 30gp, DesignJet 130 Series |
| Q5492A |
Paper - Paper (Matte) for DesignJet 130 Series, OfficeJet Pro K550 Series, HP OfficeJet Pro K550 Color Printer, OfficeJet Pro L7555 Color |
| Q5495A |
Paper - Premium Plus Photo paper (High Gloss) - B size (11 x 17-inches) - 25 sheets |
| Q6569A |
Paper - Premium Plus Soft-Gloss Photo Paper (Matte) - A size (8.5 x 11-inches) - 25 sheets (North America) |
| Q6595A |
Paper - HP Premium Presentation Paper - B size (11 x 17-inches)- 100 sheets |
| Q6638A |
Paper - Paper (Glossy) for DeskJet 300, DeskJet 640 Series, Designjet 30gp, DesignJet 130 Series |
| Q7852A |
Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper |
| Q7853A |
Paper - Paper (Glossy) for Business Inkjet 1200 Series, OfficeJet Pro K550 Series, Business Inkjet 2800 Series, DeskJet 9800 |
| Q7854A |
Paper - Paper (Glossy) for DeskJet D1311 Series, DeskJet F4180 Series, HP Deskjet F4100 All-in-One printer series, DeskJet F4140 Series |
| Q7906A |
Paper - Advanced Glossy Photo Paper - 10.2cm (4in) x 15.2cm (6in) finished size - 10.2cm (4in) x 16.5cm (6.5in) with tab - 100 sheets |
| Q8015A |
Paper - Holiday Photo Cards - 10.2cm (4in) x 21.6cm (8.5in) - Includes 40 cards, 40 envelopes, and a CD-ROM with 150 holiday templates |
| Q8016A |
Paper - Holiday Photo Cards - 10.2cm (4in) x 21.6cm (8.5in) - Includes 20 cards, 20 envelopes, and a CD-ROM with 150 holiday templates |
| Q8690A |
Paper - Paper (Glossy) for DeskJet 300, DeskJet 640 Series, Designjet 30gp, DesignJet 130 Series |
| Q8695A |
Paper - Paper (Glossy) for HP Photosmart C3100 Series All-in-one, PhotoSmart C3180 Series, PhotoSmart C3150 Series, PhotoSmart C3140 Series |
| Q8696A |
Paper - Paper (Glossy) for DeskJet 300, DeskJet 640 Series, Designjet 30gp, DesignJet 130 Series |
| Q8744A |
Paper - Paper (Glossy) for HP OfficeJet Pro K550 Color Printer, HP DeskJet 460 Mobile Printer, DeskJet 450 Series, OfficeJet v40 All-In-One |
| C8157-67019 |
Paper Path Module - Cleanout assembly - Mechanical part assembled from molded plastic and steel components - Enables straight paper path for printing of thick media and odd sized media - Enables easier paper jam clearance |
| C2890-60107 |
PC Board - Main PC Board for HP CZ296B |
| C8157-67042 |
PC Board - Carriage PCA - Electronic circuit board that controls the printhead function - Input voltage 32v, Operating voltage 32v, 5v, 3.3v, 1.8v |
| C8157-67046 |
PC Board - Wireless PCA module - PCA that provides wireless interface to the printer |
| C8157-67047 |
PC Board - Control panel assembly - Electronic PCA (Output voltage 5v, Input voltage 5v) - Enables user interaction and communication with printer |
| C8157-67048 |
PC Board - DTN control panel assembly - Electronic PCA (Output voltage 5v, Input voltage 5v) - Enables user interaction and communication with printer |
| C8157-67049 |
PC Board - DTNW control panel assembly - Electronic PCA (Output voltage 5v, Input voltage 5v) - Enables user interaction and communication with printer |
| C8157-67052 |
PC Board - Duplexer,cleanout interconnect PCA - PCA (Output voltage 5v, Input voltage 5v) - Enables recognition of duplexer |
| C8157-67053 |
PC Board - Main PCA logic board - Controls the function of the entire printer (input voltage 32v, operating voltages 32v, 5v, 3.3v, 1.8v) |
| C8157-67054 |
PC Board - DTN main PCA logic board - Controls the function of the entire printer (input voltage 32v, operating voltages 32v, 5v, 3.3v, 1.8v) |
| C8157-67055 |
PC Board - DTWN main PCA logic board - Controls the function of the entire printer (input voltage 32v, operating voltages 32v, 5v, 3.3v, 1.8v) |
| C8157-67058 |
PC Board - Drop detector PCA - Electronic circuit board that is enclosed in a metal casing - Enables the detection of missing nozzles in pens so that the printer can compensate |
| C8159A-PC_BRD |
PC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only |
| C8159A-PC_BRD_DC |
PC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board. |
| C8157-67028 |
Pinch Assembly - Pinch lift assembly - Molded plastic part - Guides the paper during paper advancement |
| C8159A-Pinchwheel |
Pinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs |
| C8157-67025 |
Platen - Platen - Structure to hold up the paper up during printing as well as adsorb overspray during printing |
| 8120-6260 |
Power Cord - Power cord (Black) - 18 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for USA, Canada, Taiwan, Latin America, and Saudi Arabia) |
| 8120-6800 |
Power Cord - Power cord (Flint Gray) - 3-wire, 16 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 240V in Israel) |
| 8120-8382 |
Power Cord - Power cord (Flint Gray) - 18 AWG, 1.8m (6.0ft) long - Has straight (F) receptacle (For 120V in the USA and Canada) |
| 8121-0516 |
Power Cord - Power cord (Flint Gray) - 18 AWG, 1.9m (6.25ft) long - Has straight (F) receptacle (For 220V in Europe) |
| 8121-0517 |
Power Cord - Power cord (Flint Gray) - 18 AWG, 1.9m (6.25ft) long - Has straight (F) receptacle (For 240V in the UK, Hong Kong, Singapore, and Malaysia) |
| 8121-0518 |
Power Cord - Power cord (Flint Gray) - 18 AWG, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220V in Denmark) |
| 8121-0519 |
Power Cord - Power cord (Flint Gray) - 18 AWG, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220V in Switzerland) |
| 8121-0520 |
Power Cord - Power cord (Flint Gray) - 18 AWG, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 240V in India) |
| 8121-0564 |
Power Cord - Power cord (Black) - 2.0m (6.6ft) long - Has straight (F) C13 receptacle (For 240V in India) |
| 8121-0729 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220V in Argentina) |
| 8121-0730 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (75in) long - Has straight (F) C13 receptacle (For 240V in Australia) |
| 8121-0734 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 220V in Brazil and Thailand) |
| 8121-0735 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220V in Chile) |
| 8121-0737 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 240VAC in India and South Africa) |
| 8121-0738 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220VAC in Switzerland) |
| 8121-0740 |
Power Cord - Power cord (Black) - 3-wire, 18 AWG, 1.9m (75in) long - Has straight (F) C13 receptacle (for 120V in the USA, Canada, Mexico, and Taiwan) |
| 8121-0742 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (75in) long - Has straight (F) C13 receptacle (For 220VAC in China) |
| 8121-0964 |
Power Cord - Power cord (Black) - 16 AWG (1.25 sq.mm.), 1.9m (6.2ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, and Thailand) |
| C8159A-Power_Cord |
Power Cord - Power module power cord- wall outlet cable to power module only. does not include power module. |
| C8159A-Power_MDLE |
Power Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord |
| C8159A-Power_MDLE_Assy |
Power Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord |
| C8157-67050 |
Power Supply - AC power supply assembly - 100-240V, 50/60Hz to 32VDC, 50/60Hz ac (worldwide operation) |
| C8159A-Power_Supply |
Power Supply - Power supply board (internal pwr supply unit in the office machine). |
| C8159A-Power_Supply_BRD |
Power Supply Board - High voltage power supply board |
| C8159A-Print_Mchnsm |
Print Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables. |
| J7942-61021 |
Print Server - HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing network peripherals with USB ports, in a 10/100 TX LAN environment - Has one Hi-Speed USB 2.0 printer port and one RJ-45 10/100 Base-TX connector |
| J7942-61031 |
Print Server - JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing network peripherals with USB ports, in a 10/100 TX LAN environment - Has one Hi-Speed USB 2.0 printer port and one RJ-45 10/100 Base-TX connector |
| C8157-67002 |
Printer - Inkjet printer - Officejet Pro K550DTN - Does NOT include duplexer or second bin |
| C8157-67003 |
Printer - Printer for OfficeJet Pro K550 Series, HP OfficeJet Pro K550 Color Printer |
| C8157-67005 |
Printer - Printer for OfficeJet Pro K550 Series, HP OfficeJet Pro K550 Color Printer |
| C8158-69300 |
Printer - Printer for OfficeJet Pro K550 Series, HP OfficeJet Pro K550 Color Printer |
| C9381A |
Printhead - HP 88 Black and Yellow printhead |
| C9382A |
Printhead - HP 88 Magenta and Cyan printhead |
| C8159A-Pulley |
Pulley - Paper pick up tray motor pulley. |
| C8159A-Pulley_ADF |
Pulley ADF - ADF feeder motor pulley |
| 5969-7555 |
Recovery Kit - Thermal InkJet 4.0 ink cartridge return kit (non-United States) |
| C8159A-Repair_InkJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| C8157-67043 |
Retainer - Bearing retainer - Metal piece that holds the felt-carriage |
| C8157-67038 |
Rod - Carriage rod - A metal rod where the carriage travels on |
| C8159A-Rod_Carriage |
Rod Carriage - Carriage rod - shaft that the carriage assembly rides on |
| C8159A-Rod_Scanner |
Rod Scanner - Scanner rod - shaft that the scanner assembly rides on |
| C8157-67021 |
Roller - Pick roller assembly - Used to pick paper from the paper trays |
| C8157-67024 |
Roller - Full output roller assembly - Rubber rollers to drive the printed paper out of printer. |
| C8157-67026 |
Roller - Output roller (secondary) assembly - Rubber rollers to drive the printed paper out of printer |
| C8157-67031 |
Roller - Drive roller grit assembly advances paper during printing |
| C8159A-Roller_ADF |
Roller ADF - Feeder ADF roller for picking up paper from ADF unit. |
| C8159A-Roller_Exit |
Roller Exit - Paper exit rollers - out put assembly. |
| C8159A-Roller_Pickup |
Roller Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray |
| C8159A-Scanner |
Scanner - Copier scanner (optical) assembly - includes scanner assembly only scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly. |
| C8159A-Scanner_Assy |
Scanner Assembly - Copier scanner & glass assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly. |
| C8159A-Scanner_Belt |
Scanner Belt - Scanner belt attaches from the scanner to the scanner motor. |
| C8159A-Scanner_Cable |
Scanner Cable - Flex circuit cable which connects to the scanner assembly. also known as flat cable, this cable moves along with the scanner unit (side to side) as it scans documents. |
| C8159A-Scanner_Motor |
Scanner Motor - Scanner driving motor |
| C8159A-Scanner_Unit |
Scanner Unit - Scanner unit includes the entire scanner base, but not the ADF portion. |
| C8157-67063 |
Sensor - Sirius sensor assembly - Sensor that helps to determine the end and start of a page |
| C8159A-Sensor_ADF |
Sensor ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly |
| C8159A-Sensor_Exit |
Sensor Exit - Exit media sensor sv |
| C8159A-Sensor_Open |
Sensor Open - Door sensor assembly - open door sensor |
| C8159A-Sensor_Out |
Sensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray |
| C8159A-Sensor_Spot |
Sensor Spot - Spot sensor assembly is attached to the carriage assembly. |
| C8159A-Separator |
Separator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays. |
| C8159A-Guide |
Service Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair. |
| C8157-67909 |
Service Parts - Fw Upgrade Cd K550 Series |
| C8157-69300 |
Service Parts - EUR Exch Refurb OJ Pro K550 |
| C8157-67035 |
Service Station - Service Station for OfficeJet Pro K550 Series, HP OfficeJet Pro K550 Color Printer |
| C8159A-Service_Station |
Service Station - Service station assembly - for conditioning the printheads when the carriage is in its home position |
| C8159A-SLED_Assy |
SLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly |
| C8159A-Slider |
Slider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side. |
| C8159A-Speaker |
Speaker - Speaker assembly - includes speaker cable. |
| C8159A-Spitton |
Spitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process |
| C8159A-Spring_Cmprsn |
Spring Compression - Compression spring - on pulley wedge, for carriage belt tension |
| C8157-67023 |
Stand - Auto pen to paper spacing stand - Helps maintain the correct distance of the carriage to paper |
| C8157-67022 |
Starwheel - Starwheel assembly - Ensures paper handover from feedrollers to output rollers |
| Q8046A |
Stickers - HP CD/DVD Tattoos - 13cm (5in) x 18cm (7in) - 15 sheets (USA, Latin America, and Canada) |
| Q8047A |
Stickers - HP CD/DVD Tattoos - 13cm (5in) x 18cm (7in) - 15 sheets (Europe, Middle East, and Africa) |
| C8159A-Trailing_Cbl |
Trailing Cable - Trailing cable for scanner - cable connects from scanner to pc board. |
| C8157-67015 |
Tray - Paper output tray - For the collection of printed paper |
| C8157-67016 |
Tray - Paper input tray (Tray 2) - Optional 350-sheet paper input tray that sits underneath the OfficeJet Pro K550 printer (Part of C8256A) |
| C8157-67017 |
Tray - Paper input tray (Tray 1) - Standard 250-sheet paper input tray - Holds paper ready for printing by printer |
| C8256A |
Tray - Paper input tray (Tray 2) - Optional 350-sheet paper input tray that sits underneath the OfficeJet Pro K550 printer |
| C8159A-Tray_Assy |
Tray Assembly - Paper input tray assembly for loading paper (bottom). |
| C8159A-Tray_Assy_CVR |
Tray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit. |
| C8159A-Tray_Base |
Tray Base - Tray base- bottom base of the paper input tray. |
| C8159A-Window |
Window - Top/front access door assembly - print cartridge access door window. |
View service parts