RM1-1318-000CN |
Adjuster - Duplexer paper size adjuster assembly - Includes the adjustment lever, holder bracket, and the two drive gears in a spring loaded arm - Mounts on the top right side of the duplexer assembly |
RC2-0392-000CN |
Arm - Arm, tag for HP LaserJet P2xxx Printer |
RC2-0405-000CN |
Arm - Cam arm - Attaches to the drawer connector |
RC2-0419-000CN |
Base - Multipurpose paper input tray separation pad base - Where the separation pad attaches to |
RB2-2895-000CN |
Bushing - Shaft bushing/retainer - Right side pickup roller support bushing |
RB2-2896-000CN |
Bushing - Shaft bushing/retainer - Left side pickup roller support bushing |
RC1-3665-000CN |
Bushing - Bushing/shaft retainer (Plastic) - Small plastic cylinder with four nubs that twist - Locks into the side frame |
RC2-0387-000CN |
Cam - Multipurpose paper input tray left side cam - Small plastic cam that moves inside the paper pick-up roller holder |
RC2-0388-000CN |
Cam - Multipurpose paper input tray right side cam - Small plastic cam that moves inside the paper pick-up roller holder - Usde on the multipurpose tray |
H2639PE |
Care Pack - HP 1 year Post Warranty Next business day Onsite LaserJet 1160/ 1320/ P201x Hardware Support |
H3110E |
Care Pack - HP Network Install InkJet/Personal LaserJet Service |
H5465E |
Care Pack - HP 3year Next business day Exchange LaserJet P2014 P2015 Service |
H5473E |
Care Pack - HP 3year Next business day LaserJet P2014 P2015 Hardware Support |
H5738PE |
Care Pack - HP 1year Post Warranty Next business day Exchange LaserJet 1160/ 1320/ P201x Service |
HC126PE |
Care Pack - HP 1year Post Warranty Phone Assist LaserJet 1xxx/ P20xx ScanJet 2xxx-6xxx Service |
Q7553A |
Cartridge - HP 53A LaserJet P2015 Black Cartridge Contains one HP LaserJet P2015 Black print cartridge. Prints approximately 3, 000 pages. |
Q7553X |
Cartridge - HP 53X LaserJet Black Print Cartridge - Prints approximately 7000 pages |
RC2-0420-000CN |
Cover - Multipurpose paper input tray pick-up roller cover - Plastic cover that protects the paper pick-up roller |
RL1-1529-000CN |
Cover - Left side cover assembly - For the LaserJet P2010 printer series |
RL1-1530-000CN |
Cover - Right side cover assembly - For the LaserJet P2010 printer series |
RM1-4252-000CN |
Cover - Tray 2 c cover assy |
RM1-4270-000CN |
Cover - Rear cover assembly - Plastic cover that protects the rear part of the printer |
RM1-4272-000CN |
Cover - Top cover assembly - For the LaserJet P2010 printer series |
RM1-4277-000CN |
Cover - Cover, rear for HP LaserJet P2xxx Printer |
RM1-4277-020CN |
Cover - Rear cover assembly - For the LaserJet P2010 printer series |
RM1-4266-000CN |
Door - Cartridge door assembly - Complete assembly |
RM1-4253-000CN |
Drive Assembly - Main drive assembly |
RM1-4255-000CN |
Drive Assembly - Duplexing drive assembly - Includes normal rotation drive assembly and reverse rotation drive assembly |
RM1-4256-000CN |
Drive Assembly - Normal rotation gear assembly - Includes the internal/external geared body, two planetary gears, outer gear with shaft, and the black ratchet gear |
RM1-4257-000CN |
Drive Assembly - Reverse rotation gear assembly - Includes the internal/external geared body, two planetary gears, outter gear with shaft, and the white ratchet gear |
RM1-4258-000CN |
Duplexer - Duplexer assembly - Enables double-sided printing by flipping the page over in the printing process |
RK2-1589-000CN |
Fan - Fan assembly - For the LaserJet P2010 printer series |
92296T |
Film - Film (Transparency) for LaserJet II, LaserJet III, LaserJet 4 Series, LaserJet 4L Series |
92296U |
Film - Film (Transparency) for LaserJet 33x0 MFP Seriess, LaserJet 4100 Series, LaserJet P2xxx Printer, Color LaserJet CM1015 MFP |
RC1-3472-000CN |
Flag - Paper sensor flag - cylindrical plastic piece with a flag on each end (One senses the paper, the other activates the photo-sensor) |
CE517A |
Flash Card - HP 8MB/64MB 16 Bit Flash/DDR2 SO DIMM |
RM1-4247-000CN |
Fuser Assembly - Fuser Assembly - Bonds toner to paper with heat - For 110-127VAC (+/- 10%) operation |
RM1-4247-020CN |
Fuser Assembly - Fusing assembly - For 110-127 VAC (+/- 10%) operation - Bonds toner to paper with heat |
RM1-4248-000CN |
Fuser Assembly - Fuser Assembly - Bonds toner to paper with heat - For 220-240VAC (+/- 10%) operation |
RM1-4248-020CN |
Fuser Assembly - Fuser Assembly - Bonds toner to paper with heat - For 220-240VAC (+/- 10%) operation |
RU5-0331-000CN |
Gear - 29-tooth gear (White plastic) - Main drive gear for the fusing assembly - Mounts on the right end of the fusing assembly |
RU5-0332-000CN |
Gear - 19-tooth gear (White plastic) |
RM1-1301-000CN |
Gear Assembly - Double gear assembly - Includes the gear body, inset gear (both with a toothless area) and compression spring - For driving the paper pickup roller |
RC2-0339-000CN |
Guide - Left lower cartridge guide |
RC2-0346-000CN |
Guide - Right lower cartridge guide |
RC2-0425-000CN |
Guide - Left upper cartridge guide |
RC2-0426-000CN |
Guide - Right upper cartridge guide |
RC2-1569-000CN |
Guide - DC cable guide - Attaches to the main drive assembly |
RM1-4263-000CN |
Guide - Paper feed guide assembly |
RC2-0334-000CN |
Holder - Solenoid holder/mount - For solenoid SL2 – Used on multipurpose tray |
RC2-0349-000CN |
Holder - Fan holder - Holds the cooling fan |
RC2-0386-000CN |
Holder - Paper pick-up roller holder |
RC2-0396-000CN |
Holder - Drawer connector holder |
RM1-4262-000CN |
Laser Scanner - Laser/Scanner assembly - Mounts on top of print structure |
RM1-1321-000CN |
Link - Shutter link assembly - Spring loaded link which engages the shutter on the laser/scanner assembly (blocking the laser beam) when the toner cartridge access door is opened - Mounts on the left front of the laser/scanner support shelf |
CB366-90905 |
Manual - Service manual - For the LaserJet P2015 series printers |
CB420A |
Memory - HP 32MB, 144-pin, DDR2 SDRAM DIMM |
CB421A |
Memory - 64MB, 144-pin, DDR2 SDRAM DIMM memory module |
CB422A |
Memory - HP 128MB, 144-pin, DDR2 SDRAM DIMM |
CB423A |
Memory - 256MB, 144-pin, DDR2 SDRAM DIMM memory module |
RK2-1567-000CN |
Motor - MOTOR, DC DC Motor - Provides power for drive assembly - Located on the right side of printer - Motor (M1) |
RL1-1524-000CN |
Pad - Multipurpose paper input tray separation pad |
RM1-1298-000CN |
Pad - Separation pad assembly - Includes the pad and spring located on the arm in the holder frame - Mounts toward the front of the tray 2 |
HPM1120 |
Paper - HP Multipurpose Paper - A size (8.5 x 11-inches) - 500 sheets |
Q7804-60001 |
PC Board - Formatter PC board assembly (no network) - For the LaserJet P2015 series - Includes firmware. (Q7805-60001 network). |
Q7804-69003 |
PC Board - Formatter PC board assembly - For the LaserJet P2015 series - Includes firmware |
Q7805-60001 |
PC Board - Formatter PC board assembly (network) - For the LaserJets P2015 with networking - Includes firmware. (Q7804-60001 no network). |
Q7805-60002 |
PC Board - Formatter PC board assembly - For the LaserJets P2015 with networking - Includes firmware. |
Q7805-67903 |
PC Board - Formatter PC board assembly - For the LaserJets P2015 with networking - Includes firmware. |
Q7805-69003 |
PC Board - Formatter PC board assembly - For the LaserJets P2015 with networking - Includes firmware. |
RM1-1262-000CN |
PC Board - Duplexer control board - Small PC board that mounts just above and to the left of the fan on the right side plate assembly |
RM1-4273-000CN |
PC Board - Engine controller board (ECU) - 110VAC - For LaserJet P2010 printer series |
RM1-4274-000CN |
PC Board - Engine controller board (ECU) - 220VAC - For the LaserJet P2010 printer series |
J7942A |
PC Board Interface - HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module |
J7942G |
PC Board Interface - HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module |
J7951G |
PC Board Interface - HP Jetdirect ew2400 802.11g wireless print server module - Includes power supply, USB cable, LAN/Ethernet cable, setup documentation and software |
8121-0564 |
Power Cord - Power cord (Black) - 2.0m (6.6ft) long - Has straight (F) C13 receptacle (For 240V in India) |
8121-0729 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220V in Argentina) |
8121-0731 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (75in) long - Has straight (F) C13 receptacle (For 220V in Europe)Limited supply only. |
8121-0733 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220VAC in Denmark) |
8121-0734 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 220V in Brazil and Thailand) |
8121-0735 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220V in Chile) |
8121-0736 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (75in) long - Has straight (F) C13 receptacle (For 100V in Japan) |
8121-0737 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 240VAC in India and South Africa) |
8121-0738 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220VAC in Switzerland) |
8121-0739 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 240V in Singapore, Hong Kong and the U.K.) |
8121-0740 |
Power Cord - Power cord (Black) - 3-wire, 18 AWG, 1.9m (75in) long - Has straight (F) C13 receptacle (for 120V in the USA, Canada, Mexico, and Taiwan) |
8121-0837 |
Power Cord - Power cord (Black) - 18 AWG, 2.5m (8.2ft) long - Has straight C13 (F) receptacle (for 240V on Australia and New Zealand) |
8121-0964 |
Power Cord - Power cord (Black) - 16 AWG (1.25 sq.mm.), 1.9m (6.2ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, and Thailand) |
8121-1004 |
Power Cord - Power cord (Flint Gray) - Three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220VAC in Israel) |
CB456A |
Product - Product for LaserJet P2xxx Printer |
CB449A-Repair_LaserJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
RM1-4265-000CN |
Retainer - Paper retainer assembly - Bracket assembly with two flapper levers - Keeps paper in the top output bin from sliding back into the printer |
RC1-0950-000CN |
Roller - M.p. roller for HP CB366A |
RC1-3470-000CN |
Roller - Idler roller (plastic) - Free wheeling roller - Two used |
RL1-0527-000CN |
Roller - Top output bin delivery roller assembly - Plastic rod with four rubber wheels (two narrow and two wide) |
RL1-0540-000CN |
Roller - Paper pickup roller - Includes the D shaped pickup roller spindle with the rubber tire - Does NOT include (RC1-3470-000CN) the idler rollers on each side of the pickup roller |
RL1-1525-000CN |
Roller - Multipurpose paper input tray pick-up roller |
RM1-4244-000CN |
Roller - Registration assembly - Set of rollers before toner cartridge and after feed rollers |
RM1-4279-000CN |
Roller - Transfer roller - Transfer charge roller |
XA9-1420-000CN |
Screw - M3 pan head phillips screw with captive flat and split-lock washers - 8mm long |
XA9-1422-000CN |
Screw - M4 X 12mm machine screw with washer |
XA9-1495-000CN |
Screw - 4 Wafer head machine screw included - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal |
XA9-1503-000CN |
Screw - M3 truss head (Flanged) phillips screw (Black oxide finish) - 6mm long |
XA9-1504-000CN |
Screw - M3 truss head (flanged) screw - 8mm long |
XB4-7300-809CN |
Screw - M3 self-tapping pan head phillips screw (Black oxide finish) - 8mm long |
XB4-7401-005CN |
Screw - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates |
RM1-1283-000CN |
Sensor - Top sensor assembly - Includes the bracket and flags for the top of page detection sensor (PS912), and paper width detection sensor (PS913) - Mounts behind the registration roller assembly |
RM1-4245-000CN |
Sensor - Paper width sensor assembly |
CB449A-Manual_Laser |
Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. |
RM1-4169-000CN |
Service Parts - Pwr inlet assy for HP CB366A |
RC1-3471-000CN |
Shaft - Drive shaft - Drives pickup roller |
RK2-0420-000CN |
Solenoid - 24V DC Solenoid (SL3) - Engages the 'normal' and 'reverse' ratchet gears on the duplex drive gear assembly - Mounts on the right side plate assembly |
RK2-1587-000CN |
Solenoid - Multipurpose paper input tray solenoid (SL2) |
RU5-2323-000CN |
Spring - Compression spring |
RU5-2335-000CN |
Spring - Compression spring - Applies downward pressure on the memory tag arm to contact the toner cartridge |
RU5-2894-000CN |
Spring - Compression spring - Located on the separation pad base of the multipurpose tray |
Q5931A |
Tray - Optional 250-sheet paper tray assembly - Includes base assembly and removable paper cassette - Adds an additional bottom paper tray (tray 3) to the LaserJet |
RC1-3483-000CN |
Tray - HP Laserjet printer 250 sheet paper tray unit |
RM1-1295-000CN |
Tray - Tray 2 rear assy |
RM1-4251-000CN |
Tray - 250-sheet paper input tray 2 cassette - Pull out cassette that paper is loaded into |
RM1-1292-080CN |
Tray Assembly - 250-sheet input paper tray (tray 2) assembly - Includes the tray body and front cover assemblies |