Partshere  
Lexmark and HP New Oem and refurb parts
Partshere, Toners, HP printers and parts
 
top bar
 
www.Partshere.com / HP Printers /  HP OfficeJet J4680 AIO HP Support Page/ HP Service Parts SmartSearch
 
Rate this page:

CB783A - OfficeJet J4680 AIO

 

HP OfficeJet J4680 AIO (CB783A)


MFG Part Number: CB783A
 
Printer Support
  HP Care Pack for OfficeJet J4680 AIO
Printer Support Techical Help HP Service Manual paper book for HPOfficeJet J4680 AIO Buy the full service manual
HP Printer Picture Diagrams Picture Diagrams
OEM HP Parts List for HP OfficeJet J4680 AIO View full list of service parts
See HP parts for this model:

HP printer parts available for CB783A HP OfficeJet J4680 AIO Printer

CB783A-Absorber Absorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters. For OfficeJet J4680 AIO - CB783A-Absorber
CB783A-AC_Adapter AC_Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached. For OfficeJet J4680 AIO - CB783A-AC_Adapter
CB783A-Actuator Actuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm). For OfficeJet J4680 AIO - CB783A-Actuator
Q3093-80004 Adapter - Adapter - Two to four wire phone cord adaptor - Q3093-80004
CB779-40001 ADF - Window for Automatic Document Feeder (ADF) - A clear plastic window that snaps into place in the bottom of the ADF assembly - CB779-40001
CB779-60004 ADF - ADF assembly - For the OfficeJet J4580 All-in-One printer series - CB779-60004
CB780-60020 ADF - Automatic document feeder (ADF) input tray - CB780-60020
CB783A-ADF_Arm ADF_Arm - Senses paper in the ADF area tray / feeder tray. this is a front flapper arm - part of the paper separation mechanism for the paper pickup assembly - mounts just in front of the front separation belts in the ADF assembly. For OfficeJet J4680 AIO - CB783A-ADF_Arm
CB783A-ADF_Feed_Assy ADF_Feed_Assembly - ADF assembly - does not include ADF input tray. ADF assembly includes the complete ADF assembly (motor, gears, rollers, sensor, does not include the ADF pad or plastic flatbed cover. (for entire unit please see ADF unit assembly). For OfficeJet J4680 AIO - CB783A-ADF_Feed_Assy
CB783A-ADF_Input_Tray ADF_Input_Tray - ADF tray ( for automatic document feeder) this is where papers are placed for feeding into unit. For OfficeJet J4680 AIO - CB783A-ADF_Input_Tray
CB783A-ADF_Motor ADF_Motor - ADF motor - the scanner ADF motor is located on left rear corner of ADF drive, location varies from each unit. however, this is the main motor on the ADF unit. For OfficeJet J4680 AIO - CB783A-ADF_Motor
CB783A-ADF_Output_Tray ADF_Out_Put_Tray - ADF out put tray is where paper come out of ADF (automatic document feeder). For this unit, we will ship the entire ADF Assembly. For OfficeJet J4680 AIO - CB783A-ADF_Output_Tray
CB783A-ADF_Pad ADF_Pad - ADF paper seperation pad assembly - mounts in the center of the ADF separation pad frame assembly. this pad prevents from multiple feeding or preventing paper jams while faxing, scanning, or copying. For OfficeJet J4680 AIO - CB783A-ADF_Pad
CB783A-ADF_PC_BRD ADF_PC_Board - Control Board on the ADF unit For OfficeJet J4680 AIO - CB783A-ADF_PC_BRD
CB783A-ADF_Roller_Kit ADF_Roller_Kit - ADF upper pick roller replacement kit. these are the rollers that feed paper into the feeder to be scan, copy, or faxed. For OfficeJet J4680 AIO - CB783A-ADF_Roller_Kit
CB783A-ADF_Scanner ADF_Scanner - ADF scanner (optical) assembly - includes the chassis assembly, scanner lens assembly (includes the charge coupled device (ccd)), the scanning lamp, ADF analog processor board, and ADF inverter board - this is the assembly that scans, copies documents. For OfficeJet J4680 AIO - CB783A-ADF_Scanner
CB783A-ADF_Sensor_BRD ADF_Sensor_Board - ADF sensor pc board assembly - narrow strip pc board with the two document skew sensors, registration sensor, and timing sensor - mounts on top of the registration guide assembly in the ADF main assembly For OfficeJet J4680 AIO - CB783A-ADF_Sensor_BRD
CB783A-ADF_Unit_Assy ADF_Unit_Assembly - Complete replacement assemlby unit. copier top assembly only. ADF not available for this unit, TOP Cover only will be shipped with order. For OfficeJet J4680 AIO - CB783A-ADF_Unit_Assy
CB783A AllinOne - HP OfficeJet J4680 All-In-One Printer - CB783A
CB783A-Arm_Delivery Arm_Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm For OfficeJet J4680 AIO - CB783A-Arm_Delivery
CB783A-Arm_Door Arm_Door - Carriage access door sensor arm For OfficeJet J4680 AIO - CB783A-Arm_Door
CB783A-Arm_Pickup Arm_Pick_Up - Paper detection arm - for registration plate on picking up paper For OfficeJet J4680 AIO - CB783A-Arm_Pickup
CB783A-Arm_Plate Arm_Plate - Lever arm - used to lift the pressure plate lifter For OfficeJet J4680 AIO - CB783A-Arm_Plate
CB783A-Arm_Sensing Arm_Sensing - Arm assembly senses paper in bottom tray For OfficeJet J4680 AIO - CB783A-Arm_Sensing
CB783A-Arm_Tension Arm_Tension - Tension arm - maintains tension on carriage belt For OfficeJet J4680 AIO - CB783A-Arm_Tension
CB780-40001 Base - Base assembly - Bottom cover of printer - CB780-40001
CB780-40026 Base - Scanner module assembly base - CB780-40026
CB783A-Battery Battery - Battery pack for hp printer For OfficeJet J4680 AIO - CB783A-Battery
CB783A-Belt_ADF Belt_ADF - Transport belt motor - provides the drive to transport paper through the ADF unit. this belt goes in the ADF assembly drive unit For OfficeJet J4680 AIO - CB783A-Belt_ADF
CB783A-Belt_Carriage Belt_Carriage - Carriage belt - moves the carriage assembly across the carriage rod For OfficeJet J4680 AIO - CB783A-Belt_Carriage
CB783A-Belt_Duplex Belt_Duplex - Duplex timing belt - small belt that goes on the duplexer unit For OfficeJet J4680 AIO - CB783A-Belt_Duplex
CB783A-Belt_Paper Belt_Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly. For OfficeJet J4680 AIO - CB783A-Belt_Paper
CB783A-Belt_Scanner Belt_Scanner - Scanner assembly belt. belt moves the scanner while copying or scanning documents. For OfficeJet J4680 AIO - CB783A-Belt_Scanner
CB780-40027 Bezel - Bezel for HP Officejet J4000 All-in-One Printer series, HP Officejet J4000 All-in-One - CB780-40027
CB783A-Bezel Bezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel For OfficeJet J4680 AIO - CB783A-Bezel
CB783A-Bracket_Left Bracket_Left - Left bracket - carriage rod adjustment bracket (left) For OfficeJet J4680 AIO - CB783A-Bracket_Left
CB783A-Bracket_Right Bracket_Right - Right bracket - carriage rod adjustment bracket (right) For OfficeJet J4680 AIO - CB783A-Bracket_Right
CB783A-Bracket_Tension Bracket_Tension - Belt tension bracket - holds the carriage belt idler pulley For OfficeJet J4680 AIO - CB783A-Bracket_Tension
8120-8909 Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Austria) - 8120-8909
8120-8910 Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Belgium) - 8120-8910
8120-8911 Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Denmark) - 8120-8911
8120-8912 Cable - Telephone cable (Germany) - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end, Germany phone plug on other end - 8120-8912
8120-8913 Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Israel) - 8120-8913
8120-8914 Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Italy) - 8120-8914
8120-8915 Cable - Telephone cable (four conductor) - RJ-11 (M) to telephone plug/socket connector - 3m (9.8ft) long (Netherlands) - 8120-8915
8120-8916 Cable - Telephone cable (Finland and Norway) - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end, Norway phone plug on other end - 8120-8916
8120-8918 Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Sweden) - 8120-8918
8120-8920 Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Turkey) - 8120-8920
8120-8921 Cable - Telephone cable (five conductor) - RJ-11 (M) to BS-601A (M/F) - 3m (9.8ft) long (for the U.K., New Zealand, and Hong Kong) - 8120-8921
8120-8922 Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 phone plug connectors (Eastern Europe, Czechoslovakia, Slovenia, and Hungary) - 8120-8922
8120-8923 Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (France, Morocco, and Tunisa) - 8120-8923
8121-0811 Cable - Telephone cable (2-wire) - RJ11 (M) connectors - 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal, and Spain) - 8121-0811
8121-0844 Cable - Telephone cable with bill tone filter - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Switzerland) - 8121-0844
8121-0868 Cable - Universal Serial Bus (USB) interface cable (Black) - Type 'A' connector to type 'B' connector - 1.83m (6.0ft) long - 8121-0868
CB783A-Cable_Carriage Cable_Carriage - Cable assembly which connects the main logic board to the carriage motor For OfficeJet J4680 AIO - CB783A-Cable_Carriage
CB783A-Cable_Interface Cable_Interface - Parallel cable - connects from your printer to computer via your parallel port. For OfficeJet J4680 AIO - CB783A-Cable_Interface
CB783A-Cable_Mchnsm Cable_Mechanism - Cable assembly which connects the main logic board to the print mechanism For OfficeJet J4680 AIO - CB783A-Cable_Mchnsm
CB783A-Cable_Panel Cable_Panel - Control panel assembly - includes ribbon cable, this is the cable that connects to the control panel or display. For OfficeJet J4680 AIO - CB783A-Cable_Panel
CB783A-Cable_USB Cable_USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing. For OfficeJet J4680 AIO - CB783A-Cable_USB
CB783A-Cam Cam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position For OfficeJet J4680 AIO - CB783A-Cam
CB783A-Cap_Lifter Cap_Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place. For OfficeJet J4680 AIO - CB783A-Cap_Lifter
UG071E Care_Pack - HP 3 year Care Pack w/Next Day Exchange for OfficeJet Printers - UG071E
UG101E Care_Pack - HP 2 year Care Pack w/Next Day Exchange for OfficeJet Printers - UG101E
UQ206E Care_Pack - HP 2 Year Care Pack w/Next Bus Day Exchange and Enhanced Tech Phone support - OfficeJet Printers - UQ206E
UQ207E Care_Pack - HP 3 Year Care Pack w/Next Bus Day Exchange and Enhanced Tech Phone support - OfficeJet Printers - UQ207E
UQ219E Care_Pack - HP 4y Nbd Exch w/Enh Ph IPG prtr -E SVC UQ219E - UQ219E
US284E Care_Pack - HP Basic Installation Service for one consumer printer with wireless capability - US284E
US285E Care_Pack - HP Premium Installation Service with wireless network setup for up to three PCs and/or printers - US285E
CB783A-Carriage_Assy Carriage_Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider. For OfficeJet J4680 AIO - CB783A-Carriage_Assy
CB783A-Carriage_Base Carriage_Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base For OfficeJet J4680 AIO - CB783A-Carriage_Base
CB783A-Carriage_Belt Carriage_Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting. For OfficeJet J4680 AIO - CB783A-Carriage_Belt
CB783A-Carriage_Cable Carriage_Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side). For OfficeJet J4680 AIO - CB783A-Carriage_Cable
CB783A-Carriage_Latch Carriage_Latch - A-arm latch - retains latch over the printheads on the carriage For OfficeJet J4680 AIO - CB783A-Carriage_Latch
CB783A-Carriage_Latch_CVR Carriage_Latch_Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle. For OfficeJet J4680 AIO - CB783A-Carriage_Latch_CVR
CB783A-Carriage_Motor Carriage_Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement. For OfficeJet J4680 AIO - CB783A-Carriage_Motor
CB783A-Carriage_Only Carriage_Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly). For OfficeJet J4680 AIO - CB783A-Carriage_Only
CB783A-Carriage_PC_BRD Carriage_PC_Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it. For OfficeJet J4680 AIO - CB783A-Carriage_PC_BRD
5069-7146 Cartridge - Ink cartridge return kit (TIJ 2.x) - Includes box and instructions - 5069-7146
5969-7553 Cartridge - Ink cartridge return kit (TIJ 2.x, non-US) - Includes box and instructions (Europe) - 5969-7553
CC653-30001 Cartridge - Cartridge for HP Officejet J4000 All-in-One, HP OfficeJet J4000 All-In-One Printer series - CC653-30001
CC653AE Cartridge - Cartridge for HP Officejet J4000 All-in-One, HP OfficeJet J4000 All-In-One Printer series - CC653AE
CC653AN Cartridge - Cartridge for HP Officejet J4000 All-in-One, HP OfficeJet J4000 All-In-One Printer series - CC653AN
CC654AE Cartridge - Cartridge for HP Officejet J4000 All-in-One, HP OfficeJet J4000 All-In-One Printer series - CC654AE
CC654AN Cartridge - Cartridge for HP Officejet J4000 All-in-One, HP OfficeJet J4000 All-In-One Printer series - CC654AN
CC656-30001 Cartridge - Cartridge for HP Officejet J4000 All-in-One, HP OfficeJet J4000 All-In-One Printer series - CC656-30001
CC656AE Cartridge - Cartridge for HP Officejet J4000 All-in-One, HP OfficeJet J4000 All-In-One Printer series - CC656AE
CC656AN Cartridge - Cartridge for HP Officejet J4000 All-in-One, HP OfficeJet J4000 All-In-One Printer series - CC656AN
CB783A-Chassis Chassis - Chassis assembly - the large plastic item that forms the base of the print mechanism For OfficeJet J4680 AIO - CB783A-Chassis
CB783A-Clutch_ADF Clutch_ADF - ADF paper clutch unit. clutch that controls movement on the ADF feeder For OfficeJet J4680 AIO - CB783A-Clutch_ADF
CB783A-Clutch_Feed Clutch_Feed - Clutch unit resposible for unit picking up paper from the pick up unit. For OfficeJet J4680 AIO - CB783A-Clutch_Feed
CB783-40001 Control_Panel - Control panel - Enables user interaction and communication with printer - WiFi enabled - CB783-40001
CB783-60002 Control_Panel - Control panel - Enables user interaction and communication with printer - WiFi enabled - CB783-60002
CB783A-Control_Panel Control_Panel - Control panel assembly - control buttons and display on top front of the unit. For OfficeJet J4680 AIO - CB783A-Control_Panel
CB780-60019 Cover - Document cover - Plastic lid that covers scanner glass - CB780-60019
CB780-60021 Cover - Automatic document feeder (ADF) top cover - Typically used for clearing paper jams - CB780-60021
CB783A-Cover_Back Cover_Back - Back cover of printer, it is usually removed to clear paper jams. For OfficeJet J4680 AIO - CB783A-Cover_Back
CB783A-Cover_Cartridge Cover_Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves. For OfficeJet J4680 AIO - CB783A-Cover_Cartridge
CB783A-Cover_Main Cover_Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off. For OfficeJet J4680 AIO - CB783A-Cover_Main
CB783A-Deflector Deflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly For OfficeJet J4680 AIO - CB783A-Deflector
CB783A-Display Display - Status led display (LCD display assembly). For OfficeJet J4680 AIO - CB783A-Display
CB783A-Door_Carriage Door_Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open. For OfficeJet J4680 AIO - CB783A-Door_Carriage
CB783A-Door_Cartridge Door_Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door. For OfficeJet J4680 AIO - CB783A-Door_Cartridge
CB783A-Door_Rear Door_Rear - Rear cleanout door assembly - rear paper jam clean out door assembly. For OfficeJet J4680 AIO - CB783A-Door_Rear
CB783A-Drive_Assy Drive_Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring. For OfficeJet J4680 AIO - CB783A-Drive_Assy
CB783A-Drive_Assy_ADF Drive_Assy_ADF - Media chassis assembly (paper drive) - moves paper from ADF assembly to scanner assembly - includes media chassis, rollers, gears, flag, sensor, deflector, cable, springs For OfficeJet J4680 AIO - CB783A-Drive_Assy_ADF
CB783A-Duplexer Duplexer - Auto duplexer assembly - provides double sided printing capability For OfficeJet J4680 AIO - CB783A-Duplexer
CB783A-Encoder Encoder - Encoder spring - provides tension for encoder strip For OfficeJet J4680 AIO - CB783A-Encoder
CB783A-Encoder_Disk Encoder_Disk - Disk encoder - helps to provide position information of the paper For OfficeJet J4680 AIO - CB783A-Encoder_Disk
CB783A-Encoder_Strip Encoder_Strip - Encoder strip - carriage position sensor reference For OfficeJet J4680 AIO - CB783A-Encoder_Strip
CB783A-Extender_ADF Extender_ADF - Paper extension for the automatic document feeder (ADF) input tray For OfficeJet J4680 AIO - CB783A-Extender_ADF
CB783A-Extender_Input Extender_Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths For OfficeJet J4680 AIO - CB783A-Extender_Input
CB783A-Extender_Output Extender_Output - Paper exit tray extension For OfficeJet J4680 AIO - CB783A-Extender_Output
CB783A-Fan_PC_BRD Fan_PC_Board - Fan to cool power supply unit For OfficeJet J4680 AIO - CB783A-Fan_PC_BRD
CB783A-Fan_Vaccum Fan_Vaccum - Vacuum fan assembly For OfficeJet J4680 AIO - CB783A-Fan_Vaccum
CB783A-Feed_Rollers Feed_Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk For OfficeJet J4680 AIO - CB783A-Feed_Rollers
CB783A-Feed_Rollers_ADF Feed_Rollers_ADF - ADF feed roller kit - includes all rollers that feed paper through the feeder. For OfficeJet J4680 AIO - CB783A-Feed_Rollers_ADF
CB783A-Flag_ADF Flag_ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounths on the front frame of the ADF paper pickup assembly For OfficeJet J4680 AIO - CB783A-Flag_ADF
CB783A-Flag_Paper Flag_Paper - OOPS flag - out of paper sensor For OfficeJet J4680 AIO - CB783A-Flag_Paper
CB783A-Formatter Formatter - Formatter board assembly, this board communicates with your computer device and has MAC port connector. For OfficeJet J4680 AIO - CB783A-Formatter
CB783A-Front_Panel Front_Panel - Front panel assembly - includes lcd and actuator buttons For OfficeJet J4680 AIO - CB783A-Front_Panel
CB783A-Gear_Assy Gear_Assembly - ADF gear assembly driven by ADF main motor For OfficeJet J4680 AIO - CB783A-Gear_Assy
CB783A-Gear_Cluster Gear_Cluster - Cluster gear, large gear on service station For OfficeJet J4680 AIO - CB783A-Gear_Cluster
CB783A-Gear_Double Gear_Double - Transfer gear - has double gear attached on service station For OfficeJet J4680 AIO - CB783A-Gear_Double
CB783A-Gear_Main Gear_Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller. For OfficeJet J4680 AIO - CB783A-Gear_Main
CB783A-Gear_Station Gear_Station - Gears on shaft of spittoon station For OfficeJet J4680 AIO - CB783A-Gear_Station
CB779-00001 Glass - Scanner glass assembly - Glass plate on which the documents are placed to be scanned - CB779-00001
CB783A-Glass_ADF_Window Glass_ADF_Window - No Small glass piece used when scanning - copying - faxing with ADF feeder for this unit, will ship Q5888-00002. For OfficeJet J4680 AIO - CB783A-Glass_ADF_Window
CB783A-Glass_Assy Glass_Assembly - Main top copier glass assembly. For OfficeJet J4680 AIO - CB783A-Glass_Assy
CB783A-Guide_Paper Guide_Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken For OfficeJet J4680 AIO - CB783A-Guide_Paper
CB783A-Hinge_Cvr Hinge - Single cover end M-Hinge, Hinge is for top cover supporting opening and closing of the cover. Most covers use 2 hinges, this price includes 1pc Hinge. For OfficeJet J4680 AIO - CB783A-Hinge_Cvr
CB783A-Holder Holder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place. For OfficeJet J4680 AIO - CB783A-Holder
CB783A-Idler Idler - Scanner belt idler assembly - maintains scannter belt tension. For OfficeJet J4680 AIO - CB783A-Idler
CB783A-Ink_DLVRY Ink_Delivery_System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly For OfficeJet J4680 AIO - CB783A-Ink_DLVRY
CB783A-Ink_Supply_Station Ink_Supply_Station - Ink supply service station (iss) assembly For OfficeJet J4680 AIO - CB783A-Ink_Supply_Station
CB780-40012 LCD - Display LCD assembly - For the OfficeJet J4580 All-in-One printer series - CB780-40012
CB783A-Lid_Cover_Assy Lid_Cover_Assy - Top glass copier cover. Lid that pressed document onto the glass for copying or scanning document. For OfficeJet J4680 AIO - CB783A-Lid_Cover_Assy
CB783A-Motor_ADF Motor_ADF - ADF motor unit - drives ADF rollers on the feeder assembly For OfficeJet J4680 AIO - CB783A-Motor_ADF
CB783A-Motor_Carriage Motor_Carriage - Carriage motor - motor that drives the carriage assembly For OfficeJet J4680 AIO - CB783A-Motor_Carriage
CB783A-Motor_Scanner Motor_Scanner - Scanner unit motor - drives the scanner unit to scan documents to be copied, fax, or scanned. For OfficeJet J4680 AIO - CB783A-Motor_Scanner
CB783A-MTR_Srvce_Station Motor_Service_Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly For OfficeJet J4680 AIO - CB783A-MTR_Srvce_Station
CB783A-Exchange-OfficeJet Officejet_Unit_Exchange - Replace your Officejet for another and return yours for a core refund, keep your supplies and accessories. Working unit ships without supplies and accessories. For OfficeJet J4680 AIO - CB783A-Exchange-OfficeJet
CB783A-Overlay Overlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately. For OfficeJet J4680 AIO - CB783A-Overlay
CB783A-Pad_ADF Pad_ADF - Pad separator - (located on ADF unit) assembled from plastic and rubber components; to help in separating sheet of media during faxing, scanning, or copying. For OfficeJet J4680 AIO - CB783A-Pad_ADF
CB783A-Pad_Tray Pad_Tray - Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing For OfficeJet J4680 AIO - CB783A-Pad_Tray
51634Y Paper - Media for HP Q5761A - 51634Y
Q5458A Paper - Paper (Glossy) for DeskJet 300, DeskJet 640 Series, Designjet 30gp, DesignJet 130 Series - Q5458A
Q6568A Paper - Paper (Glossy) for DeskJet 660 Series, DeskJet 300, DesignJet 1055 Series, DeskJet 5550 Series - Q6568A
Q6569A Paper - Paper (Matte) for DeskJet 660 Series, DeskJet 300, DesignJet 1055 Series, DeskJet 5550 Series - Q6569A
Q7853A Paper - Paper (Glossy) for Business Inkjet 1200 Series, OfficeJet Pro K550 Series, Business Inkjet 2800 Series, DeskJet 9800 - Q7853A
CB780-60064 Paper_Path_Module - Cleanout assembly - Enables easier paper jam clearance - CB780-60064
C2890-60107 PC_Board - Main PC Board for HP CZ296B - C2890-60107
CB783A-PC_BRD PC_Board - Ink cartridge carriage assembly pc board - includes carriage pc board only For OfficeJet J4680 AIO - CB783A-PC_BRD
CB783A-PC_BRD_DC PC_Board_DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board. For OfficeJet J4680 AIO - CB783A-PC_BRD_DC
CB783A-Pinchwheel Pinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs For OfficeJet J4680 AIO - CB783A-Pinchwheel
8121-0889 Power_Cord - Power cord (Black) - 2-wire, 18 AWG, 0.5m (1.6ft) long - Has straight (F) C7 receptacle (Opt. 953) - 8121-0889
8121-0893 Power_Cord - Power cord (Black) - 2-wire, 17 AWG, 0.5m (1.6ft) long - Has straight (F) C7 receptacle (For 240V in UK, Singapore, Malaysia, and Hong Kong, Opt. 955) - 8121-0893
8121-0895 Power_Cord - Power cord (Black) - 2-wire, 17 AWG, 0.5m (1.6ft) long - Has straight (F) C7 receptacle (For use in Europe, Opt. 954) - 8121-0895
8121-0898 Power_Cord - Power cord (Black) - 2-wire, 17 AWG, 0.5m (1.6ft) long - Has straight (F) C7 receptacle (For use in Argentina, Opt. 950) - 8121-0898
8121-0899 Power_Cord - Power cord (Black) - 2-wire, 17 AWG, 0.5m (1.6ft) long - Has straight (F) C7 receptacle (For use in Chile, Opt. 959) - 8121-0899
8121-1015 Power_Cord - Power cord (Black) - 18 AWG, 3-wire, 0.5m (1.64ft) long - Has straight (F) C13 receptacle (Europe) - 8121-1015
8121-1028 Power_Cord - Power cord (Black) - 18 AWG, 3-wire, 0.5m (1.64ft) long - Has straight (F) C13 receptacle (for South Africa and Bhutan) - 8121-1028
8121-1082 Power_Cord - Pwr-cord opt-964 2 cond 0.5-m-lg rohs - 8121-1082
CB783A-Power_Cord Power_Cord - Power module power cord- wall outlet cable to power module only. does not include power module. For OfficeJet J4680 AIO - CB783A-Power_Cord
0957-2242 Power_Module - Power module - Input voltage 100-240VAC, 50/60Hz - Output voltage 32VDC, 625mA, 20 watts - Requires separate 2-wire power cord with C7 connector - 0957-2242
CB783A-Power_MDLE Power_Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord For OfficeJet J4680 AIO - CB783A-Power_MDLE
CB783A-Power_MDLE_Assy Power_Module_Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord For OfficeJet J4680 AIO - CB783A-Power_MDLE_Assy
CB783A-Power_Supply Power_Supply - Power supply board (internal pwr supply unit in the office machine). For OfficeJet J4680 AIO - CB783A-Power_Supply
CB783A-Power_Supply_BRD Power_Supply_Board - High voltage power supply board For OfficeJet J4680 AIO - CB783A-Power_Supply_BRD
CB783A-Print_Mchnsm Print_Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables. For OfficeJet J4680 AIO - CB783A-Print_Mchnsm
CB783-67001 Printer - Printer for HP Officejet J4000 All-in-One, HP Officejet J4000 All-in-One Printer series - CB783-67001
CB783A-Pulley Pulley - Paper pick up tray motor pulley. For OfficeJet J4680 AIO - CB783A-Pulley
CB783A-Pulley_ADF Pulley_ADF - ADF feeder motor pulley For OfficeJet J4680 AIO - CB783A-Pulley_ADF
CB783A-Rod_Carriage Rod_Carriage - Carriage rod - shaft that the carriage assembly rides on For OfficeJet J4680 AIO - CB783A-Rod_Carriage
CB783A-Rod_Scanner Rod_Scanner - Scanner rod - shaft that the scanner assembly rides on For OfficeJet J4680 AIO - CB783A-Rod_Scanner
CB783A-Roller_ADF Roller_ADF - Feeder ADF roller for picking up paper from ADF unit. For OfficeJet J4680 AIO - CB783A-Roller_ADF
CB783A-Roller_Exit Roller_Exit - Paper exit rollers - out put assembly. For OfficeJet J4680 AIO - CB783A-Roller_Exit
CB783A-Roller_Pickup Roller_Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray For OfficeJet J4680 AIO - CB783A-Roller_Pickup
CB780-60022 Scanner - Scanner assembly - For the OfficeJet J4580 All-in-One printer series - CB780-60022
CB783A-Scanner Scanner - Copier scanner (optical) assembly - includes the chassis assembly, scanner lens assembly (includes the charge coupled device (ccd)), the scanning lamp, ADF analog processor board, and ADF inverter board - major portion of the ADF main assembly. For OfficeJet J4680 AIO - CB783A-Scanner
CB783A-Scanner_Assy Scanner_Assembly - Scanner assembly includes the entire ADF unit and entire scanner unit. For OfficeJet J4680 AIO - CB783A-Scanner_Assy
CB783A-Scanner_Belt Scanner_Belt - Scanner belt attaches from the scanner to the scanner motor. For OfficeJet J4680 AIO - CB783A-Scanner_Belt
CB783A-Scanner_Cable Scanner_Cable - Flex circuit cable which connects to the scanner assembly. also known as flat cable, this cable moves along with the scanner unit (side to side) as it scans documents. For OfficeJet J4680 AIO - CB783A-Scanner_Cable
CB783A-Scanner_Motor Scanner_Motor - Scanner driving motor For OfficeJet J4680 AIO - CB783A-Scanner_Motor
CB783A-Scanner_Unit Scanner_Unit - Scanner unit includes the entire scanner base, but not the ADF portion. For OfficeJet J4680 AIO - CB783A-Scanner_Unit
CB783A-Sensor_ADF Sensor_ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly For OfficeJet J4680 AIO - CB783A-Sensor_ADF
CB783A-Sensor_Exit Sensor_Exit - Exit media sensor sv For OfficeJet J4680 AIO - CB783A-Sensor_Exit
CB783A-Sensor_Open Sensor_Open - Door sensor assembly - open door sensor For OfficeJet J4680 AIO - CB783A-Sensor_Open
CB783A-Sensor_Out Sensor_Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray For OfficeJet J4680 AIO - CB783A-Sensor_Out
CB783A-Sensor_Spot Sensor_Spot - Spot sensor assembly is attached to the carriage assembly. For OfficeJet J4680 AIO - CB783A-Sensor_Spot
CB783A-Separator Separator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays. For OfficeJet J4680 AIO - CB783A-Separator
CB783A-Guide Service_Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair. For OfficeJet J4680 AIO - CB783A-Guide
CB783A-Repair-InkJet Service_Printer - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. For OfficeJet J4680 AIO - CB783A-Repair-InkJet
CB783A-Service_Station Service_Station - Service station assembly - for conditioning the printheads when the carriage is in its home position For OfficeJet J4680 AIO - CB783A-Service_Station
CB783A-SLED_Assy SLED_Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly For OfficeJet J4680 AIO - CB783A-SLED_Assy
CB783A-Slider Slider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side. For OfficeJet J4680 AIO - CB783A-Slider
CB783A-Speaker Speaker - Speaker assembly - includes speaker cable. For OfficeJet J4680 AIO - CB783A-Speaker
CB783A-Spitton Spitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process For OfficeJet J4680 AIO - CB783A-Spitton
CB783A-Spring_Cmprsn Spring_Compression - Compression spring - on pulley wedge, for carriage belt tension For OfficeJet J4680 AIO - CB783A-Spring_Cmprsn
CB783A-Trailing_Cbl Trailing_Cable - Trailing cable for scanner - cable connects from scanner to pc board. For OfficeJet J4680 AIO - CB783A-Trailing_Cbl
CB780-60045 Tray - Paper input tray - to load printer paper into this assembly ( paper tray unit). - CB780-60045
CB783-60007 Tray - Input tray assembly - Holds paper supply for printer - CB783-60007
CB783A-Tray_Assy Tray_Assembly - Paper input tray assembly for loading paper (bottom). For OfficeJet J4680 AIO - CB783A-Tray_Assy
CB783A-Tray_Assy_CVR Tray_Assembly_Cover - Tray cover - the top cover for the paper pick up tray unit. For OfficeJet J4680 AIO - CB783A-Tray_Assy_CVR
CB783A-Tray_Base Tray_Base - Tray base- bottom base of the paper input tray. For OfficeJet J4680 AIO - CB783A-Tray_Base
CB783A-Window Window - Top/front access door assembly - print cartridge access door window. For OfficeJet J4680 AIO - CB783A-Window

bottom bar

Helpfull Links:   | HP Printer Parts 1 2 3 4 5 | SmartSearch |
Home
       About Us       Contact Us        RFQ       Support       Site Map   

Copyright© 2014 Partshere.com   Privacy Policy  Terms and Conditions     Send us your Feedback