| CQ869-67048 |
Accessory - SPI Loading Accessory SERV |
| CQ871-67049 |
Accessory - Loading accessory - For use with 104-inch plotters |
| Q6651-60081 |
Accessory - Lubrication felts kit - For DesignJet printers |
| CH955-67084 |
Actuator - Shutter bump (actuator) - For Designjet printers |
| CQ871-67056 |
Actuator - SOL (spectrophotometer) actuator assembly - Used to open the shutter |
| CQ871-67090 |
Air Pressure System - Air Pressure System (APS) assembly - Contains two air pumps which are used to force the ink through the tubes to the carriage assembly |
| CQ871-67101 |
Arm - Metal CAM ARM SERV |
| CQ871-67050 |
Bar - Take-Up Reel (TUR) tension bar |
| CQ871-67024 |
Belt - Belt assembly - Includes tensioner |
| CQ871-67028 |
Box - Electronics box assembly - Includes base and cover |
| CH955-67114 |
Brace - Right-side arc assembly - Brace that is used for the cover assemblies to connect onto |
| CH955-67115 |
Brace - Left-side arc assembly - Brace that is used for the cover assemblies to connect onto |
| CH955-67089 |
Bracket - Curing holder bracket - For use with 104-inch plotters |
| CQ869-67009 |
Bracket - Left side scan-axis bracket |
| Q1273-60086 |
Bracket - Right bracket assembly - Used to connect the right cover assembly |
| CQ871-67008 |
Cabinet - Power cabinet assembly - For use with plotters |
| CH955-67099 |
Cable - Carriage Flex cables SERV. Carriage flex cables - For Designjet printers |
| CQ871-67003 |
Cable - Electronics box cables - For use with plotters |
| CQ871-67013 |
Cable - Top cover fans cable - For use with plotters |
| CQ871-67016 |
Cable - Curing fans cable |
| CQ871-67020 |
Cable - Drying fans cable - For use with plotters |
| CQ871-67021 |
Cable - Window lock sensor cable |
| CQ871-67044 |
Cable - Trailing cable - Transfers the processed encoder signal to the engine PCA (SRK and TC 104 SERV) |
| CQ871-67067 |
Cable - Optical Media Advance Sensor (OMAS) cable |
| CQ871-67081 |
Cable - Cables - Connected on the service station side of the printer |
| CQ871-67104 |
Cable - SRK and TC 104 SERV VERSION 2 |
| Q1273-60245 |
Cable - Ink supply station to cartridge cable connector one sold (assembly takes up to 6). |
| CQ871-67085 |
Carriage - Carriage assembly - Does not include the carriage PCA, SOL sensor, or the line sensor |
| CN705A |
Cartridge - HP 792 Black Latex Designjet Ink Cartridge - Print cartridge volume 775ml |
| CN706A |
Cartridge - HP 792 Cyan Latex Designjet Ink Cartridge - Print cartridge volume 775ml |
| CN707A |
Cartridge - HP 792 Magenta Latex Designjet Ink Cartridge - Print cartridge volume 775ml |
| CN708A |
Cartridge - HP 792 Yellow Latex Designjet Ink Cartridge - Print cartridge volume 775ml |
| CN709A |
Cartridge - 792 775ml lt cyan latex designJet ink, HP 792 DesignJet L26500 L28500 Cyan Ink Cartridge |
| CN710A |
Cartridge - HP 792 Light Magenta Latex Designjet Ink Cartridge - Print cartridge volume 775ml |
| CH622A |
Cleaner - HP 789 Designjet Printhead Cleaning Container |
| CR278A |
Cleaner - HP 792 Designjet Printhead Cleaning Kit |
| CQ871-67096 |
Clip - Tube clips - For use with 104-inch plotters |
| CQ871-67054 |
Control Panel - Control panel assembly - For use with the 104-inch Designjet L28500 printer |
| CH955-67048 |
Cover - Top cover fan - Includes grill |
| CH955-67050 |
Cover - Top cover fan diffusor - Includes all fan diffusors - For Designjet printers |
| CQ871-67009 |
Cover - Cable plate and cover - For use with Designjet printers |
| CQ871-67027 |
Cover - Left side cover assembly - For use with 104-inch plotters |
| CQ871-67031 |
Cover - Curing covers - For use with 104-inch plotters |
| CQ871-67038 |
Cover - Top cover - For use with the 104-inch Designjet L28500 printer |
| CQ871-67042 |
Cover - Curing fans cover - Does not include fans |
| CQ871-67046 |
Cover - Right side connector cover |
| CQ871-67063 |
Cover - Right side cover - Does not include door |
| CQ871-67069 |
Cover - Back cover - For use with the 104-inch Designjet L28500 printer |
| CH955-67007 |
Cutter - Cutter assy serv RoHS |
| CQ869-67064 |
Deflector - AirCURTAIN deflector - Includes seven deflectors - For use with Designjet printers |
| CQ871-67064 |
Door - Right side door - For use with plotters |
| CQ871-67036 |
Drive Assembly - Hard disk drive (HDD) - Contains the firmware of the printer |
| CQ871-67012 |
Encoder - Encoder strip - Includes encoder sensor |
| CQ871-67068 |
Encoder - Drive roller encoder - For use with 104-inch plotters |
| CQ871-67116 |
Encoder - HP Encoder SVS Kit Boomer |
| CH955-67062 |
Fan - Curing fan SERV |
| CH955-67088 |
Fan - Rear dryer fan - Contains one fan // Dryer Fan SERV for HP DesignJet L25500 Series |
| CQ109-67022 |
Fan - Vacuum fan assembly Hewlett Packard Designjet Plotter. |
| CQ871-67066 |
Gear - Gears kit - Includes the roller brake |
| CQ871-67017 |
Grille - Dryer grilles - For use with 104-inch plotters |
| CQ871-67018 |
Grille - Curing grilles - For use with 104-inch plotters |
| CQ869-67052 |
Guide - SPI Drain Tube Guide SERV |
| CQ871-67052 |
Hardware - Dryer plastic isolators - For use with 104-inch plotters |
| CQ871-67060 |
Hardware - Vacuum extra assembly - Includes frame, tubes, and pipes |
| CQ871-67006 |
Heater - Control heaters - For use with 104-inch plotters |
| CQ871-67007 |
Hinge - Window hinges - Located on the arc side |
| CQ869-67049 |
Holder - SPI edge holder SERV |
| CQ871-67062 |
Holder - Curing resistor holders |
| Q6651-60343 |
Holder - Quick reference guide holder |
| CH955-67037 |
Hub - Spindle Hub SERV |
| CQ871-67065 |
Kit - Hardware kit - Contains various tools and screws to assemble the stand assembly - For use with 104-inch plotters |
| CQ871-67079 |
Kit - Grounding cables kit - Includes the Ink Supply Station (ISS) grounding cable, arc safety ground cable, and the drying safety ground cable |
| CQ871-67080 |
Kit - ISS-side cables kit - Includes cover switch extension, converters O/P power drying/curing, vapor/curing fans, IR SNS cooling fan, substrate crash, PM-differential PCA cable, analog encoder, drying fans, IR sensors, scan motor fan, printMech to EOLA |
| Q1273-60273 |
Kit - Service station cable - Includes printhead cleaner door switch |
| CQ871-67025 |
Label - Labels - For use with the Designjet L28500 printer |
| CQ871-67057 |
Lever - Pinchwheel lever assembly |
| Q1273-60103 |
Lever - Input feed roller levers (two used) |
| CH955-67047 |
Lock - Window locks - Locks the transparent window in place |
| CQ869-67077 |
Lubricant - Synthetic oil – 10 x 3.5oz (100g) plastic bottles |
| CH955-67070 |
Maintenance Kit - Cleaning maintenance kit - For DesignJet printers |
| CQ871-67092 |
Maintenance Kit - Maintenance kit 1 - Includes the scan-axis motor, encoder strip and sensor, ink tubes assembly and trailing cable, belt and tension kit assembly, carriage assembly (without PCA, cutter, color sensor), line sensor, carriage PCA cover, and paper jam sensor |
| CQ871-67093 |
Maintenance Kit - Maintenance kit 2 - Includes the service station, line sensor, paper jam sensor, ink maintenance kit, and lubrication felts - For use with 104-inch plotters |
| CQ871-67094 |
Maintenance Kit - Maintenance kit 3 - Includes the drop detector, ink funnel, roller transmission, ink maintenance kit, lubrication felts, and line sensor - For use with 104-inch plotters |
| CQ871-67117 |
Maintenance Kit - New SMK1 104 Serv |
| CR279A |
Maintenance Kit - HP 792 Designjet Ink Maintenance kit |
| CQ871-67004 |
Module - Right side rewinder module - For use with 104-inch plotters |
| CQ871-67026 |
Module - Left side rewinder module - For use with 104-inch plotters |
| CQ871-67041 |
Module - Curing module - The curing module fixes (cures) the latex ink - Does not include fans, resist, and IR sensor |
| CQ871-67043 |
Module - Dryer module - Evaporates most of the water content of the ink to provide the correct temperature for satisfactory print quality |
| CQ871-67061 |
Module - Vaccum extra module - Includes the Eola control board |
| Q6651-60270 |
Module - Optical Media Advance Sensor (OMAS) module |
| CH955-67053 |
Motor - Web wiper motor assembly - Includes plate |
| CQ871-67058 |
Motor - Media motor - For use with 104-inch plotters |
| CQ871-67071 |
Motor - Scan-axis motor, Scan axis motor 104 SERV V2 - For use with Designjet printers. |
| CQ871-67105 |
Motor - Scan axis motor 104 SERV V2 |
| CQ871-67073 |
Mylar - MI profile and mylar - For use with 104-inch plotters |
| CH955-67054 |
PC Board - Ink Service Station (ISS) PCA - For Designjet plotters |
| CQ105-67061 |
PC Board - Eola PCA service kit - There are 2 Eola PCAs to control 4 brushless blowers in order to generate the required vacuum to hold the substrate - One is connected to the print mechanism PCA (left side) and the other to the mini interconnect PCA (right side) |
| CQ109-67020 |
PC Board - Formatter board (Main PCA) - Includes processor, heatsink, and fan |
| CQ109-67034 |
PC Board - Carriage PCA board - For DesignJet printers |
| CQ109-67048 |
PC Board - Formatter PCA and proc and HS |
| CQ109-67054 |
PC Board - Formatter PCA with less noise FAN |
| CQ869-67061 |
PC Board - Optical Media Advance Sensor (OMAS) PCA board |
| CQ871-67001 |
PC Board - Interconnect PC board - For use with plotters |
| CQ871-67002 |
PC Board - Engine PC board - This board is the main controller of the printer |
| CQ871-67030 |
PC Board - Print mechanism PC board - Controls all the mechatronics of the printer |
| CQ871-67082 |
PC Board - Ink Service Station (ISS) pre-driver PCA - For Designjet plotters |
| Q6651-60066 |
Pinchwheel - Pnch wheels kit serv Pinchwheel kit - For Designjet plotters. |
| CQ871-67011 |
Platen - Output platen - For use with 104-inch plotters |
| CQ871-67037 |
Platen - Print platen assembly - For use with 104-inch plotters |
| CQ871-67072 |
Platen - MI platen - For use with 104-inch plotters |
| CH955-67006 |
Power Supply - Power Supply Unit (PSU) - DesignJet L25500 printer series |
| CQ871-60048 |
Power Supply - Control heaters - For use with 104-inch plotters, 4300W Power Supply. |
| CQ871-67074 |
Power Supply - Extra Power Supply Unit (PSU) - Output voltage 24VAC - There is only one LED in the extra PSU (this LED indicates that the output 24 V voltage is being delivered and it is operating normally) |
| CQ871-67055 |
Primer - Primer valve - Includes the tubes assembly |
| Q6651-60265 |
Primer - Primer assembly - For the DesignJet Z6100 printer series |
| CN702A |
Printhead - HP 792 Yellow/Black Designjet Printhead |
| CN703A |
Printhead - HP 792 Cyan/Light Cyan Designjet Printhead |
| CN704A |
Printhead - HP 792 Light Magenta/Magenta Designjet Printhead |
| Q6651-60335 |
Printhead - Setup printhead kit - For the DesignJet Z6100 printer series / HP Designjet Plotter Set of 8 Ink System Purgers |
| CH955-67083 |
Protector - Color sensor (SOL) shutter protector |
| CQ871-67051 |
Protector - Dryer protector - For use with 104-inch plotters |
| CQ871A-Repair_DesignJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| CQ871-67022 |
Resistor - Curing resistors - For use with 104-inch plotters |
| CH955-67065 |
Roller - Output roller support - Includes the pins |
| CQ871-67047 |
Roller - Entry roller - For use with 104-inch plotters |
| CQ871-67059 |
Roller - Drive roller - For use with 104-inch plotters |
| CQ871-67077 |
Screw - Screw set - For use with 104-inch plotters |
| CH955-67046 |
Sensor - Window lock sensor SERV |
| CH955-67066 |
Sensor - Temperature Optical Media Advance Sensor (TOMAS) assembly |
| CH955-67101 |
Sensor - Cal sol assy serv, Color sensor (SOL) assembly. |
| CM765-67001 |
Sensor - Service door sensor assembly - Includes screws |
| CQ869-67021 |
Sensor - SPI media presence sensor SERV |
| CQ869-67060 |
Sensor - SPI Drop D & Funnel Trans SERV Drop detector sensor and funnel transmission |
| CQ869-67062 |
Sensor - Line sensor assembly - Includes line sensor holder and cable |
| CQ871-67005 |
Sensor - Window lock sensor - For use with 104-inch plotters |
| CQ871-67014 |
Sensor - Drying IR sensor - Detects the temperature and sends this information to the heater control assembly |
| CQ871-67015 |
Sensor - Curing IR sensor and fan - For use with 104-inch plotters |
| CQ871-67033 |
Sensor - Paper jam sensor |
| CQ871-67035 |
Sensor - Take-Up Reel (TUR) sensor module |
| CQ871-67053 |
Sensor - Media lever sensor |
| CQ871A-Manual_DesignJet |
Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. |
| CQ869-67053 |
Service Parts - Ink funnel - For use with Designjet printers |
| CQ871-67045 |
Service Parts - Ink waste management - For use with Designjet printers |
| CQ869-67026 |
Service Station - Service station assembly - Includes the service station cable |
| CQ871-67078 |
Shelf - Rear and Front tube shelf - For use with 104-inch plotters |
| CQ871-67040 |
Spindle - 3-inch spindle - For use with 104-inch plotters |
| Q6651-60341 |
Stop - Carriage stopper - Includes carriage stopper screw and media-axis motor bracket |
| CQ871-67010 |
Switch - Curing thermal switch assembly |
| CQ871-67019 |
Take Up Assembly - Take-Up Reel (TUR) diverter - For use with 104-inch plotters |
| CQ871-67034 |
Take Up Assembly - Right side Take-Up Reel (TUR) module |
| CQ871-67048 |
Take Up Assembly - Left side Take-Up Reel (TUR) module |
| CH955-67111 |
Tool - Broken bag fixing tools |
| Q1273-60296 |
Tool - Instant dry photo gloss calibration sheets |
| CH955-67028 |
Tray - Cartridge trays - Located on the lower Ink Supply Station (ISS) |
| CQ871-67029 |
Trim - Left side trim assembly |
| CQ871-67032 |
Trim - Curing trims - For use with 104-inch plotters |
| CQ871-67084 |
Trim - Right side trim assembly |
| CH955-67108 |
Vinyl Adhesive - CAL HP Perm. Gloss Adhesive Vinyl |
| CQ871-67023 |
Wheel - Complete pinch wheels - For use with 104-inch plotters |
| CH955-67055 |
Window - Transparent window - Located on the front panel window cover - For 42-inch plotters |
| CQ871-67039 |
Window - Window assembly - Does not include the dryer assembly - For use with 104-inch plotters |
View service parts