| Q6675-60093 |
Adapter - 3-inch spindle adaptor kit, includes two adaptors. |
| CH538-67018 |
Belt - Belt assembly - Includes belt tensioner - For 44-inch plotters |
| CH538-67051 |
Bumper - Left and right side upper roll support bumpers - For the Designjet T series printers |
| CH538-67052 |
Bumper - Left and right side lower roll support bumpers - For the Designjet T series printers |
| Q5669-60687 |
Bushing - Carriage rear bushing |
| CH538-67044 |
Carriage - Carriage with cutter Assembly - For the Designjet T770/T790/T1200/T1300/T2300 printer series |
| CR647-67025 |
Carriage - Carriage with cutter Assembly - For the Designjet T770/T790/T1200/T1300/T2300 printer series |
| Q6675-60043 |
Carriage - Carriage rail oiler For HP DesignjetT1200/T770/T790/T620/T110/T610/T1120/T2300/Z5200 Rial oiler assy svc |
| CH538-67002 |
Cover - Lower roll cover assembly - With pinches - For DesignJet printers |
| CH538-67003 |
Cover - Upper roll cover assembly - Includes pinches - For Designjet printers |
| CH538-67013 |
Cover - Left cover assembly - Includes the ink door - For the Designjet T1200 printer series |
| CH538-67014 |
Cover - Right cover - For the Designjet T1200 printer series |
| CH538-67047 |
Cover - T1200 Roll Cover bi-stable spring. Roll cover bi-stable springs left and right - For Designjet printers |
| CH538-67050 |
Cover - Roll cover freewheel assembly - For Designjet printers |
| CK837-67002 |
Cover - Carriage cover - For the DesignJet T1120/620 printer series |
| CN727-60050 |
Cover - Left side cover assembly (Carbonite) - Includes the ink door |
| CN727-60083 |
Cover - Right side cover - Does not include the right side ink door cover |
| CN727-60091 |
Cover - Back cover assembly (Carbonite) - Includes deflector |
| Q6683-60203 |
Cover - Right cover assembly - Does not include the right ink cartridge door - For the DesignJet T1100/T1100ps printer series |
| Q6687-60064 |
Cover - Front cover assembly - For 44-inch plotters |
| Q6659-60236 |
Cross Brace - Cross-brace - Connects and supports the two stand legs - For 44-inch plotters |
| CN727-67023 |
Cutter - HP Designjet T770 T1200 T2300 Cutter Assembly |
| CH538-67017 |
Door - Left ink cartridge door - For Designjet printers |
| CN727-60074 |
Door - Right side ink door assembly |
| Q6659-60182 |
Foam - Full bleed foam kit - For 44-inch plotters |
| CH539-69001 |
Foot - Foot Svs Black 2 pcs, Foot Assembly SV Foot assembly (Black) - Includes two feet |
| CH639-69001 |
Foot - T series and Z series HP Designjet Plotters. New Foot Assembly SV Foot assembly (Black) - Includes two feet |
| Q5669-60715 |
Foot - Foot assembly - Includes one foot and one support tube;The following part(s) are related to part Q5669-60715. May we suggest CH539-69001 |
| CN727-67042 |
Formatter - Formatter board only - (will not include the hard disk drive CK837-67035) - For the Hewlett Packard Designjet T2300/T790/T1300 Formatter SV series Formatter board - (Formatter with hard disk drive/ with current firmware order CR647-67027). |
| CR647-67029 |
Formatter - T790/T1300 Formatter w/ HDD for HP Designjet Plotter Units. |
| Q6675-60044 |
Guide - Right side roll guide assembly |
| Q6677-60019 |
Guide - Left side roll guide assembly - For 44-inch plotters;Click to order the functional equivalent: Q6677-67006 |
| CR647-67007 |
Hard Drive - MSG SATA HDD w/FW SV Hard Drive with Firmware |
| CR647-67018 |
Hard Drive - MSG SATA HDD w/FW SV Hard Drive with Firmware |
| CR647-67021 |
Hard Drive - MSG SATA HDD w/FW SV Hard Drive with Firmware |
| CR647-67028 |
Hard Drive - SATA HDD W/FW SV, MSG SATA HDD w/FW SV Hard Drive with Firmware (New OEM) |
| CH538-67022 |
Hardware - Converger assembly - For the 44-inch Designjet printers |
| Q6683-60188 |
Ink Supply Station - Left ink supply station - For the DesignJet T1100/T610 printer series |
| Q6675-67004 |
Ink System - Ink system purgers -for Hewlett Packard plotter units, ink system purge, - includes six units. |
| Q6675-67005 |
Ink System - Ink system purgers - Includes 100 units |
| CH538-67006 |
Kit - Cable kit - For the Designjet T series printers |
| CN727-67016 |
Kit - Cables kit - eMFP and ferrite cables |
| CH538-67020 |
Label - Serial number label - For the Designjet T1200/T770 printer series |
| CK837-67001 |
Latch - Carriage latch - For the DesignJet T1120/620 printer series |
| Q5669-60716 |
Leg - Leg assembly - Side support for the plotter - Does NOT include the foot assembly |
| Q5669-67054 |
Lifter - Starwheel lifter assembly - For the DesignJet T1100/T610 printer series |
| CH538-67040 |
Maintenance Kit - Preventive maintenance kit 2 service station - Includes the drop detector and the service station spittoon - For the Designjet T1200, T770, T790, T795, T1300 and T2300 printer series |
| Q6659-60237 |
Media Bin - Media bin (Gray) - Includes bin and support - Mounts to the printer stand legs - For 44-inch plotters |
| CH538-67027 |
Motor - T1200/T770 Media Advance Trans Media advance transmission - For DesignJet printers |
| Q6718-67017 |
Motor - Starwheel motor assembly - For the DesignJet printers T series and Z series. |
| Q6677-60018 |
Overdrive Assembly - Print zone overdrive assembly - For 44-inch plotters |
| CH538-67005 |
Panel - Left side panel - For Designjet printers |
| CN727-67039 |
Panel - T2300 T790 T1300 Series front touch panel signed service |
| CH538-67039 |
Paper Path Module - Clean out - For the 44-inch Designjet T1200/T770 printer series |
| Q6687-60093 |
Paper Path Module - Paper advance calibration kit - For 44-inch plotters |
| CK837-67005 |
PC Board - Carriage PCA - Controls movement of carriage assembly - For the DesignJet T1120/620 printer series |
| CN727-60002 |
PC Board - Interconnect PCA - For the Designjet T2300 printer series |
| CN727-60115 |
PC Board - Formatter board only - (will not include the hard disk drive CK837-67035) - For the Hewlett Packard Designjet T2300/T790/T1300 Formatter SV series Formatter board - (Formatter with hard disk drive/ with current firmware order CR647-67027). |
| CN727-67020 |
PC Board - Interconnect PCA - For the DesignJet T2300 printer series |
| CN727-67035 |
PC Board - Formatter board only - (will not include the hard disk drive CK837-67035) - For the Hewlett Packard Designjet T2300/T790/T1300 Formatter SV series Formatter board - (Formatter with hard disk drive/ with current firmware order CR647-67029). |
| CN727-67038 |
PC Board - T2300 Engine PCA w/ PSU SV |
| CR647-67011 |
PC Board - Engine PCA w/PSU SV Engine PCA w/PSU SV for Hewlett Packard Designjet T series. |
| CH538-67037 |
Pinch Assembly - Pincharm assembly for roll cover - For the Designjet T1200 printer series |
| Q6687-60085 |
Pinchwheel - Pinchwheel assembly - For the DesignJet T1100/T610 printer series |
| Q6659-60089 |
Platen - Output platen assembly - For 44-inch plotters |
| Q6718-67033 |
Power Supply - Power supply unit (PSU) assembly - For DesignJet printersPower supply unit (PSU) assembly - For DesignJet printers |
| CR651B-Repair_DesignJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| CH538-67033 |
Sensor - Single sheet sensor - For the Designjet T series printers |
| CH538-67041 |
Sensor - T1200 Roll Cover Sensor w/cabl Lower left support sensor with cable - For the DesignJet T series printers |
| CH538-67071 |
Sensor - WINDOW SENSOR W SHIELD SVWindow position sensor - Includes shield |
| CR647-67023 |
Sensor - MSG signed analog encoder PC board (for calibration and alignment line sensor order Q6683-67004) |
| CR647-67024 |
Sensor - Line sensor service |
| Q5669-60666 |
Sensor - Drop detector sensor assembly |
| Q5669-67068 |
Sensor - Out of paper sensor (OOPS - paper sensor.(for media sensor unit order CN727-69003). |
| Q5669-67801 |
Sensor - Out of paper sensor (OOPS - paper sensor.(for media sensor unit order CN727-69003). |
| CR651B-Manual_DesignJet |
Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. |
| CH538-60051 |
Service Station - Preventive Maintenance Kit #2. Service station - Includes the drop detector and the service station spittoon - For the Designjet T1200/T770 printer series |
| Q5669-67807 |
Solenoid - Pen to paper space (PPS) solenoid - For the DesignJet T1100/T610 printer series |
| CH538-67046 |
Spacer - Left and right side wall spacers - For the Designjet T series printers |
| Q6687-67001 |
Spindle - 44-inch take-up reel spindle assembly |
| Q5669-67049 |
Spitton - Left-side spittoon assembly - Holds expelled ink from cartridge during refresh cycle |
| CK839-67009 |
Starwheel - Starwheel assembly - For 44-inch plotters |
| Q6687-60060 |
Starwheel - Starwheel assembly - For 44-inch plotters |
| CK839-67005 |
Strip - Encoder strip - Includes the encoder - For the 44inch DesignJet T1120/620 printer series |
| CH538-67029 |
Support - Lower right side support - For the Designjet T1200 printer series |
| CN727-60045 |
Support - Roll cover support (Carbonite) - Located on the upper left side |
| Q5669-60690 |
Tool - Flex contacts cleaning tool |
| Q5669-60691 |
Tool - Pinch insertion tool sv For Designjet printers |
| Q6675-67017 |
Tool - Spanner tool for HP HP DesignJet T1120 SD Multifunction Printer |
| Q6675-67018 |
Tool - Media driver tool kit - Includes the handle for media driver tool support and the media driver ddjustment tool |
| Q6687-60084 |
Tool - Pinchwheel insertion tool - For Designjet printers |
| CN727-60053 |
Trim - Integrated front trim (Carbonite) - Includes both right and left sides |
| CR649-67006 |
Tube - Tube system - Includes the trailing Cable and ferrite parts - Tube System 44 Assy SV w/ MOD TC plotters |
| Q5669-67063 |
Tube - Basket tubes - For Hewlett Packard DesignJet printers |
View service parts