| Q6675-60093 |
Adapter - 3-inch spindle adaptor kit, includes two adaptors. |
| CH538-67018 |
Belt - Belt assembly - Includes belt tensioner - For 44-inch plotters |
| CH538-67021 |
Belt - T1200/T770 Belt tensioner SV |
| CH539-69001 |
Bracket - Foot Svs Black 2 pcs, Foot Assembly SV Foot assembly (Black) - Includes two feet |
| CH538-67051 |
Bumper - Left and right side upper roll support bumpers - For the Designjet T series printers |
| CH538-67052 |
Bumper - Left and right side lower roll support bumpers - For the Designjet T series printers |
| Q5669-60687 |
Bushing - one Carriage rear bushing (one sold) Carriage Rear Bushing For HP T610 T620 Z2100 Z3100 T1100 T770 T790 and compatible models. |
| CH538-67044 |
Carriage - Carriage with cutter Assembly - For the Designjet T770/T790/T1200/T1300/T2300 printer series |
| CR647-67025 |
Carriage - Carriage with cutter Assembly - For the Designjet T770/T790/T1200/T1300/T2300 printer series |
| Q6675-60043 |
Carriage - Carriage rail oiler For HP DesignjetT1200/T770/T790/T620/T110/T610/T1120/T2300/Z5200 Rial oiler assy svc |
| C9370A |
Cartridge - HP 72 Photo Black Ink Cartridge - Print cartridge volume 130ml |
| C9371A |
Cartridge - HP 72 Cyan Ink Cartridge - Print cartridge volume 130ml |
| C9372A |
Cartridge - HP 72 Magenta Ink Cartridge - Print cartridge volume 130ml |
| C9373A |
Cartridge - HP 72 Yellow Ink Cartridge - Print cartridge volume 130ml |
| C9374A |
Cartridge - HP 72 Gray Ink Cartridge - Print cartridge volume 130ml |
| C9397A |
Cartridge - HP 72 Photo Black Ink Cartridge - Print cartridge volume 69ml |
| C9398A |
Cartridge - HP 72 Cyan Ink Cartridge - Print cartridge volume 69ml |
| C9399A |
Cartridge - HP 72 Magenta Ink Cartridge - Print cartridge volume 69ml |
| C9400A |
Cartridge - HP 72 Yellow Ink Cartridge - Print cartridge volume 69ml |
| C9401A |
Cartridge - HP 72 Gray Ink Cartridge - Print cartridge volume 69ml |
| C9403A |
Cartridge - HP 72 Matte Black Ink Cartridge - Print cartridge volume 130ml |
| CH575A |
Cartridge - HP 726 Matte Black Ink Cartridge - Print cartridge volume 300ml |
| CN727-67019 |
Control Panel - Touch control panel - For the Designjet T2300 printer series. |
| CN727-67041 |
Control Panel - T2300 T790 T1300 Series front touch panel signed service |
| CH538-67002 |
Cover - Lower roll cover assembly - With pinches - For DesignJet printers |
| CH538-67003 |
Cover - Upper roll cover assembly - Includes pinches - For Designjet printers |
| CH538-67013 |
Cover - Left cover assembly - Includes the ink door - For the Designjet T1200 printer series |
| CH538-67014 |
Cover - Right cover - For the Designjet T1200 printer series |
| CH538-67047 |
Cover - T1200 Roll Cover bi-stable spring. Roll cover bi-stable springs left and right - For Designjet printers |
| CH538-67050 |
Cover - Roll cover freewheel assembly - For Designjet printers |
| CK837-67002 |
Cover - Carriage cover - For the DesignJet T1120/620 printer series |
| CK837-67003 |
Cover - Carriage PCA covers - For the DesignJet T1120/620 printer series |
| CK837-67028 |
Cover - T1120/620 Carriage PCA Covers SV |
| CN727-60050 |
Cover - Left side cover assembly (Carbonite) - Includes the ink door |
| CN727-60083 |
Cover - Right side cover - Does not include the right side ink door cover |
| CN727-60091 |
Cover - Back cover assembly (Carbonite) - Includes deflector |
| CR651-67001 |
Cover - T1300 Top cover SV |
| Q6683-60203 |
Cover - Right cover assembly - Does not include the right ink cartridge door - For the DesignJet T1100/T1100ps printer series |
| Q6687-60064 |
Cover - Front cover assembly - For 44-inch plotters |
| Q6659-60236 |
Cross Brace - Cross-brace - Connects and supports the two stand legs - For 44-inch plotters |
| CN727-67023 |
Cutter - HP Designjet T770 T1200 T2300 Cutter Assembly |
| CH538-67017 |
Door - Left ink cartridge door - For Designjet printers |
| CN727-60074 |
Door - Right side ink door assembly |
| CH538-67073 |
Encoder - Encoder disk - Helps provide position the information of the paper |
| Q5669-60702 |
Encoder - Encoder disk - Helps provide position the information of the paper |
| Q6687-60067 |
Encoder - ENCODER STRIP 44 SV Encoder strip - Includes the encoder strip spring and nut - For DesignJet printers |
| 51642A |
Film - Polyester matte film - 61cm (24in) x 36.6m (120ft) roll |
| 51642B |
Film - Polyester matte film - 91.4cm (36in) x 36.6m (120ft) roll |
| Q6659-60182 |
Foam - Full bleed foam kit - For 44-inch plotters |
| CH639-69001 |
Foot - T series and Z series HP Designjet Plotters. New Foot Assembly SV Foot assembly (Black) - Includes two feet |
| CR647-67029 |
Formatter - T790/T1300/ Z5400 Formatter w/ HDD for HP Designjet Plotter Units. |
| Q6675-60044 |
Guide - Right side roll guide assembly |
| Q6675-67026 |
Guide - Right Roll Guide SVC |
| Q6677-60019 |
Guide - Left side roll guide assembly - For 44-inch plotters;Click to order the functional equivalent: Q6677-67006 |
| Q6677-67006 |
Guide - Left Roll Guide SVC |
| CR647-67007 |
Hard Drive - MSG SATA HDD w/FW SV Hard Drive with Firmware |
| CR647-67018 |
Hard Drive - MSG SATA HDD w/FW SV Hard Drive with Firmware |
| CR647-67021 |
Hard Drive - MSG SATA HDD w/FW SV Hard Drive with Firmware |
| CR647-67028 |
Hard Drive - SATA HDD W/FW SV, MSG SATA HDD w/FW SV Hard Drive with Firmware (New OEM) |
| CR650-67001 |
Hard Drive - MSG SATA HDD w/FW SV Hard Drive with Firmware |
| CH538-67022 |
Hardware - Converger assembly - For the 44-inch Designjet printers |
| Q6683-60188 |
Ink Supply Station - Left ink supply station - For the DesignJet T1100/T610 printer series |
| Q6675-67004 |
Ink System - Ink system purgers -for Hewlett Packard plotter units, ink system purge, - includes six units. |
| Q6675-67005 |
Ink System - Ink system purgers - Includes 100 units |
| CH538-67006 |
Kit - Cable kit - For the Designjet T series printers |
| CN727-67016 |
Kit - Cables kit - eMFP and ferrite cables |
| CH538-67020 |
Label - Serial number label - For the Designjet T1200/T770 printer series |
| CR651-67003 |
Label - Support Label T1300 nameplate SV |
| CR652-67001 |
Label - Support Label T1300ps nameplate SV |
| CK837-67001 |
Latch - Carriage latch - For the DesignJet T1120/620 printer series |
| Q5669-60716 |
Leg - Leg assembly - Side support for the plotter - Does NOT include the foot assembly |
| Q5669-67054 |
Lifter - Starwheel lifter assembly - For the DesignJet T1100/T610 printer series |
| CH538-67024 |
Maintenance Kit - Preventive maintenance kit 1 - Includes the carriage with cutter assembly, scan-axis motor, tube system with trailing cable, and belt - For the 44-inch Designjet T Series printers. |
| CH538-67024 |
Maintenance Kit - Preventive maintenance kit 1 - Includes the carriage with cutter assembly, scan-axis motor, tube system with trailing cable, and belt - For the 44-inch Designjet T Series printers. |
| CH538-67040 |
Maintenance Kit - Preventive maintenance kit 2 service station - Includes the drop detector and the service station spittoon - For the Designjet T1200 T770 T790 T795 T1300 and T2300 printer series |
| CR649-67003 |
Maintenance Kit - Preventive maintenance kit 1 - Includes the carriage with cutter assembly, scan-axis motor, tube system with trailing cable, and belt - For the 44-inch Designjet T Series printers. |
| CR649-67003 |
Maintenance Kit - Preventive maintenance kit 1 - Includes the carriage with cutter assembly, scan-axis motor, tube system with trailing cable, and belt - For the 44-inch Designjet T Series printers. |
| Q6659-60237 |
Media Bin - Media bin (Gray) - Includes bin and support - Mounts to the printer stand legs - For 44-inch plotters |
| CH538-67010 |
Motor - T1200/T770 Scan Axis Motor SV, SCAN AXIS MOTOR - HP T1200 T1300 T2300 T770 T790 |
| CH538-67027 |
Motor - T1200/T770 Media Advance Trans Media advance transmission - For DesignJet printers |
| CH538-67076 |
Motor - Scan Axis Motor Poly-V, SCAN AXIS MOTOR - HP T1200 T1300 T2300 T770 T790 |
| Q6718-67017 |
Motor - Starwheel motor assembly - For the DesignJet printers T series and Z series. |
| Q6677-60018 |
Overdrive Assembly - Print zone overdrive assembly - For 44-inch plotters |
| CH538-67005 |
Panel - Left side panel - For Designjet printers |
| CN727-67039 |
Panel - T2300 T790 T1300 Series front touch panel signed service |
| Q1956A |
Paper - HP Heavyweight Coated Paper - 106.7cm (42in) x 68.6m (225ft) roll |
| CH538-67039 |
Paper Path Module - Clean out - For the 44-inch Designjet T1200/T770 printer series |
| CK837-67019 |
Paper Path Module - Media advance transmission - For the DesignJet T1120SD/T1120/620 printer series |
| Q6687-60093 |
Paper Path Module - Paper advance calibration kit - For 44-inch plotters |
| CK837-67005 |
PC Board - Carriage PCA - Controls movement of carriage assembly - For the DesignJet T1120/620 printer series |
| CN727-60002 |
PC Board - Interconnect PCA - For the Designjet T2300 printer series |
| CN727-60115 |
PC Board - Formatter board only - (will not include the hard disk drive CK837-67035) - For the Hewlett Packard Designjet T2300/T790/T1300 Formatter SV series Formatter board - (Formatter with hard disk drive/ with current firmware order CR647-67027). |
| CN727-67015 |
PC Board - Formatter board - will not include the hard disk drive - For the Hewlett Packard Designjet T2300/T790/T1300 Formatter SV series Formatter board - (Formatter with hard disk drive/ with current firmware order CR647-67027). |
| CN727-67018 |
PC Board - Engine PCA - Includes the Power Supply Unit (PSU) - For the DesignJet T2300 printer series |
| CN727-67020 |
PC Board - Interconnect PCA - For the DesignJet T2300 printer series |
| CN727-67035 |
PC Board - Formatter board only - (will not include the hard disk drive CK837-67035) - For the Hewlett Packard Designjet T2300/T790/T1300 Formatter SV series Formatter board - (Formatter with hard disk drive/ with current firmware order CR647-67029). |
| CN727-67038 |
PC Board - T2300 Engine PCA w/ PSU SV |
| CN727-67042 |
PC Board - Formatter board only - (will not include the hard disk drive CK837-67035) - For the Hewlett Packard Designjet T2300/T790/T1300/Z5400 Formatter SV series Formatter board - (Formatter with hard disk drive/ with current firmware order CR647-67027). |
| CR647-67011 |
PC Board - Engine PCA w/PSU SV Engine PCA w/PSU SV for Hewlett Packard Designjet T series. |
| CR651-67005 |
PC Board - Formatter board only - (will not include the hard disk drive CK837-67035) - For the Hewlett Packard Designjet T2300/T790/T1300 Formatter SV series Formatter board - (Formatter with hard disk drive/ with current firmware order CR647-67027). |
| CR651-67006 |
PC Board - Engine PCA w/PSU SV Engine PCA w/PSU SV for Hewlett Packard Designjet T series. |
| CH538-67037 |
Pinch Assembly - Pincharm assembly for roll cover - For the Designjet T1200 printer series |
| Q5669-60705 |
Pinch Assembly - Pinch lift assembly - Molded plastic part - Guides the paper during paper advancement |
| Q6687-60085 |
Pinchwheel - Pinchwheel assembly - For the DesignJet T1100/T610 printer series |
| Q6659-60089 |
Platen - Output platen assembly - For 44-inch plotters |
| CN727-67022 |
Power Supply - Z3200/T2300/T1120/T620 Power Supply SV |
| CR651-67004 |
Power Supply - Power Supply SV for the DesignJet T790 T1300 plotter parts. |
| Q6718-67033 |
Power Supply - Power supply unit (PSU) assembly - For DesignJet printersPower supply unit (PSU) assembly - For DesignJet printers |
| C9380A |
Printhead - HP 72 Gray and Photo Black Printhead |
| C9380A |
Printhead - HP 72 Gray and Photo Black Printhead |
| C9383A |
Printhead - HP 72 Magenta and Cyan Printhead |
| C9383A |
Printhead - HP 72 Magenta and Cyan Printhead |
| C9384A |
Printhead - HP 72 Matte Black and Yellow Printhead |
| C9384A |
Printhead - HP 72 Matte Black and Yellow Printhead |
| CR652A-Repair_DesignJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| CH538-67033 |
Sensor - Single sheet sensor - For the Designjet T series printers |
| CH538-67041 |
Sensor - T1200 Roll Cover Sensor w/cabl Lower left support sensor with cable - For the DesignJet T series printers |
| CK837-67020 |
Sensor - Encoder sensor assembly - For the DesignJet T1120SD/T1120/620 printer series |
| CR647-67023 |
Sensor - MSG signed analog encoder PC board (for calibration and alignment line sensor order Q6683-67004) |
| CR647-67024 |
Sensor - Line sensor service |
| Q5669-60666 |
Sensor - Drop detector sensor assembly |
| Q5669-60706 |
Sensor - Pinchwheel lifter sensor sv |
| Q5669-67068 |
Sensor - Out of paper sensor (OOPS - paper sensor.(for media sensor unit order CN727-69003). |
| Q5669-67801 |
Sensor - Out of paper sensor (OOPS - paper sensor.(for media sensor unit order CN727-69003). |
| Q6683-67004 |
Sensor - Line sensor - Detects paper width and skew - Measures calibration accuracy and printhead alignment |
| CR652A-Manual_DesignJet |
Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. |
| CH538-60051 |
Service Station - Preventive Maintenance Kit #2. Service station - Includes the drop detector and the service station spittoon - For the Designjet T1200 T770 T790 T795 T1300 and T2300 printer series |
| CH538-67046 |
Spacer - Left and right side wall spacers - For the Designjet T series printers |
| Q6687-67001 |
Spindle - 44-inch take-up reel spindle assembly |
| Q5669-67049 |
Spitton - Left-side spittoon assembly - Holds expelled ink from cartridge during refresh cycle |
| CK839-67009 |
Starwheel - Starwheel assembly - For 44-inch plotters |
| Q6687-60060 |
Starwheel - Starwheel assembly - For 44-inch plotters |
| CK839-67005 |
Strip - Encoder strip - Includes the encoder - For the 44inch DesignJet T1120/620 printer series |
| CH538-67029 |
Support - Lower right side support - For the Designjet T1200 printer series |
| CN727-60044 |
Support - Roll cover support (Carbonite) - Located on the upper right side |
| CN727-60045 |
Support - Roll cover support (Carbonite) - Located on the upper left side |
| CR651-67007 |
Support - Upper right roll cover support (Carbonite Black) - Located on the upper right side of the Designjet |
| Q5669-60690 |
Tool - Flex contacts cleaning tool |
| Q5669-60691 |
Tool - Pinch insertion tool sv For Designjet printers |
| Q6675-67017 |
Tool - Spanner tool for HP HP DesignJet T1120 SD Multifunction Printer |
| Q6675-67018 |
Tool - Media driver tool kit - Includes the handle for media driver tool support and the media driver ddjustment tool |
| Q6687-60084 |
Tool - Pinchwheel insertion tool - For Designjet printers |
| CN727-60053 |
Trim - Integrated front trim (Carbonite) - Includes both right and left sides |
| CN727-60097 |
Tube - Tube system - Includes the trailing Cable and ferrite parts - Tube System 44 Assy SV w/ MOD TC plotters |
| CR649-67006 |
Tube - Tube system - Includes the trailing Cable and ferrite parts - Tube System 44 Assy SV w/ MOD TC plotters |
| Q5669-67063 |
Tube - Basket tubes - For Hewlett Packard DesignJet printers |
| CR651-67002 |
Window - T1300 window 44 SV |
Techical Help
View service parts