Partshere  
Lexmark and HP New Oem and refurb parts
Partshere, Toners, HP printers and parts About Partshere Contact Partshere Partshere Support Partshere Order Status Partshere Login
 
top bar
 
Rate this page:
See HP parts for this model:

HP parts available for Q1342A HP LaserJet 1000

7121-8042 Bezel - HP logo (jewel) - for HP LaserJet series printers
RA0-1185-000CN Bracket - Left side fuser bracket (L-shaped) - Provides mounting support for the fusing assembly
RA0-1186-000CN Bracket - Right side fuser bracket (L-shaped) - Provides mounting support for the fusing assembly
RA0-1104-000CN Bushing - Roller bushing/retainer
Q1342-60001 Cable - Cable pod assembly - Includes USB cable with attached pod assembly
Q1342-69001 Cable - Cable pod assembly - Includes USB cable with attached pod assembly
RG0-1097-000CN Cable - 4-wire cable assembly
6R932 Cartridge - 15x hi yield black toner
C7115-60101 Cartridge - Ultra-Precise Black toner cartridge - Will print approximately 2,500 pages
C7115-60101 Cartridge - Ultra-Precise Black toner cartridge - Will print approximately 2,500 pages
C7115A Cartridge - Ultraprecise black toner cartridge - Will print approximately 2,500 pages based on a 5% print density
C7115X Cartridge - Ultraprecise black toner cartridge - Will print approximately 3,500 pages based on a 5% print density
WT2-5694-000CN Clamp - Snap-in cable clamp
5090-3379 Cleaner - Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills
RA0-1177-000CN Cover - Front cover - Lower front of printer - With opening for inserting the paper input tray assembly
RA0-1403-000CN Cover - Left side cover - Has cut-out for the cable pod assembly
RA0-1405-000CN Cover - Paper tray cover - Lift-up translucent aqua plastic cover for the input paper tray
RF0-1073-000CN Cover - Right side cover assembly - Has molded-in air intake louvers
RG0-1016-000CN Cover - Rear cover assembly - Includes rear cover and fold down face-up (or straight through) paper output tray (Tray is NOT sold separately)
RG0-1091-000CN Door - Toner cartridge door - Fold down door used when accessing the toner cartridge
92296T Film - Film (Transparency) for LaserJet II, LaserJet III, LaserJet 4 Series, LaserJet 4L Series
92296U Film - Film (Transparency) for LaserJet 33x0 MFP Seriess, LaserJet 4100 Series, LaserJet P2xxx Printer, Color LaserJet CM1015 MFP
RA0-1003-000CN Foot - Rubber foot - For bottom of printer - Three used
RA0-1197-000CN Foot - Rubber foot for HP LaserJet 1200 Series
RG9-1493-000CN Fuser Assembly - Fuser Assembly - For 100VAC to 120VAC operation - Bonds the toner to the paper with heat
RG9-1493-060CN Fuser Assembly - Fusing assembly - For 100VAC to 120VAC operation - Bonds the toner to the paper with heat
RG9-1494-000CN Fuser Assembly - Fuser Assembly - For 220VAC to 240VAC operation - Bonds the toner to the paper with heat
RG9-1494-040CN Fuser Assembly - Fuser Assembly - For 220VAC to 240VAC operation - Bonds the toner to the paper with heat
RA0-1088-000CN Gear - 29 tooth gear for HP LaserJet 1200 Series
RA0-1089-000CN Gear - 17 tooth gear for HP LaserJet 1200 Series
RA0-1176-000CN Gear - 69 tooth gear - Large gear with ribs and six small holes
RA0-1172-000CN Gear Assembly - 17 tooth gear assembly - Includes the 17 tooth gear mounted on a black plastic lever/bracket
RG0-1020-000CN Gear Assembly - Gear/clutch assembly - Includes two gear bodies and internal spring
RY7-5081-000CN Gear Assembly - Gear/clutch assembly kit - Includes double-gear body, shaft attachment piece and spring
RA0-1072-000CN Ground - Grounding Plate - L-shaped, spring steel
RA0-1161-000CN Guide - Front guide assembly - Ribbed plastic piece that runs the width of the printer
RG9-1498-000CN Laser Scanner - Laser/Scanner assembly for HP LaserJet printers and MFP models.
RG9-1498-040CN Laser Scanner - Laser/Scanner assembly - Mounts on top of the print structure frame
RG0-1087-000CN LED - LED status panel assembly (or control panel) - Plastic front cover support with two LED's
RA0-1182-000CN Lever - Shutter lever - Spring loaded lever - Mounts to the top of the laser/scanner assembly
RA0-1023-000CN Link - Connecting link
5851-1890 Manual - LaserJet part list booklet - Covers LaserJet 1005, 1010, 1012, 1015, 1200, 2300, 3300mfp, 4100mfp, 5000, 5100, 8150 and 9000 series printers - Volume I - This is only listing of service parts for these printers
5851-1891 Manual - LaserJet quick reference service guide (monochrome) - Volume IV
Q1342-90901 Manual - LaserJet 1000 Series getting started guide (English, French, Spanish and Portuguese)
Q1342-90902 Manual - LaserJet 1000 Series getting started guide (English, Hebrew, Turkish, Russian, Hungarian, Polish, French, Slovakian and Czechoslovakian)
Q1342-90903 Manual - LaserJet 1000 Series getting started guide (English, Swedish, Finnish, Danish, Norwegian, Hebrew, Latvian, Lithuanian and Estonian)
Q1342-90904 Manual - LaserJet 1000 Series getting started guide (English, Polish, Czechoslovakian, Hungarian, Slovakian, Slovenian, Croatian and Romanian)
Q1342-90905 Manual - LaserJet 1000 Series getting started guide (English, Russian, Kazakh, Bulgarian and Turkish)
Q1342-90906 Manual - LaserJet 1000 Series getting started guide (English, Arabic and French)
Q1342-90907 Manual - LaserJet 1000 Series getting started guide (English and Simplified Chinese)
Q1342-90908 Manual - LaserJet 1000 Series getting started guide (English, Traditional Chinese (Taiwanese), Thai, Bahasa Indonesian, Vietnamese and Korean)
Q1342-90922 Manual - Q1342-90922
RH7-1505-000CN Motor - Stepper motor assembly
RF0-1014-000CN Pad - Separation pad assembly Separation pad assembly
RF0-1014-020CN Pad - Separation pad assembly
RA0-1127-000CN Pan - Support pan (case) for the engine controller PC board
Q1298A Paper - LaserJet Satin finish tough paper - A size (8.5 x 11-inches) - Will not tear and will withstand outdoor weather conditions - Can print on both sides
Q1298B Paper - LaserJet Satin finish tough paper - A4 size (21.0cm x 29.7cm) - Will not tear and will withstand outdoor weather conditions - Can print on both sides - 50 sheets per box
RG0-1090-000CN PC Board - Connector PC board assembly - Has connector for the cable
RG0-1093-000CN PC Board - Engine control PC board - Main logic and power supply board
RG0-1094-000CN PC Board - Engine control PC board - Main logic and power supply board for the printer (For 220-240VAC operation)
RG0-1085-000CN Pickup Assembly - Paper pickup assembly - Includes the feed roller assembly, separation pad, plastic housing and other associated parts - Does not include pickup roller
RG0-1006-000CN Plate - Paper lift plate assembly - Plastic plate assembly that includes the two blue paper width adjusters
RG0-1083-040CN Plate - Right side plate assembly - Includes the right side plate, drive motor, most all drive gears, and cam levers - Does not come with the pickup roller solenoid or 69 tooth gear
RG0-1084-060CN Plate - Left side plate assembly - Internal metal plate that the connector PC board mounts to
8120-6800 Power Cord - Power cord (Flint Gray) - 3-wire, 16 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 240V in Israel)
8120-6869 Power Cord - Power cord (Flint Gray) - 3-wire, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Argentina)
8120-8382 Power Cord - Power cord (Flint Gray) - 18 AWG, 1.8m (6.0ft) long - Has straight (F) receptacle (For 120V in the USA and Canada)
8120-8707 Power Cord - Power cord (Flint Gray) - 17 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 220VAC in China)
8120-8871 Power Cord - Power cord (Black) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Thailand, Cambodia, Vietnam, and the Philippines)
8121-0516 Power Cord - Power cord (Flint Gray) - 18 AWG, 1.9m (6.25ft) long - Has straight (F) receptacle (For 220V in Europe)
8121-0517 Power Cord - Power cord (Flint Gray) - 18 AWG, 1.9m (6.25ft) long - Has straight (F) receptacle (For 240V in the UK, Hong Kong, Singapore, and Malaysia)
8121-0518 Power Cord - Power cord (Flint Gray) - 18 AWG, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220V in Denmark)
8121-0519 Power Cord - Power cord (Flint Gray) - 18 AWG, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220V in Switzerland)
8121-0520 Power Cord - Power cord (Flint Gray) - 18 AWG, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 240V in India)
8121-0524 Power Cord - Power cord (Flint Gray) - 18 AWG, 1.9m (6.25ft) long - Has straight (F) receptacle (For 240V in Australia)
8121-0737 Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 240VAC in India and South Africa)
8121-0738 Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220VAC in Switzerland)
Q1299A Protector - Sheet protectors - 0.1mm (4.0 mil) thick polypropylene sheet protectors for 'A' size (8.5-inches x 11-inches) documents - Has top and side openings for easy insertion and removal of documents - 50 sleeves per box
Q1299B Protector - Sheet protectors - 0.1mm (4.0 mil) thick polypropylene sheet protectors for 'A4' size (210mm x 297mm) documents - Has top and side openings for easy insertion and removal of documents - 50 sleeves per box
Q1342A-Repair_LaserJet Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
RF0-1003-000CN Roller - Face-up (straight through) output roller - Metal shaft with two rollers
RG0-1005-000CN Roller - Paper feed roller assembly - Includes feed roller, feed roller base assembly, retainer bushings, paper input leading edge sensor, sensor flag and spring
RG0-1010-000CN Roller - Output roller assembly - Includes face-down delivery roller, four spring-loaded pressure rollers, support frame, and drive gear
RG9-1483-000CN Roller - Transfer roller assembly - Transfers static charge to the media being printed on
RL1-0303-000CN Roller - Paper pickup roller (D-shaped roller) - Picks up media from the paper input tray
RY7-5082-000CN Screw - Screw kit - Includes nine bags of different size screws
RG0-1072-000CN Sensor - Paper sensor PC board - Small board with optical flag sensor (Flag not included)
RG0-1082-000CN Sensor - Delivery sensor PC board - Small board with optical flag sensor (Flag not included)
Q1342A-Manual_Laser Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams.
RG0-1007-020CN Shaft - Paper pickup shaft assembly - Includes the shaft, the two cams, pickup roller holder, and end cap
RH7-5315-000CN Solenoid - 24V DC Solenoid - Engages the pickup roller gear/clutch assembly
RA0-1128-000CN Spacer - Printed circuit board spacer
RA0-1035-000CN Spring - Torsion spring - Provides high voltage connection to the toner cartridge (developing cylinder)
RA0-1169-000CN Spring - Compression spring
RA0-1200-000CN Spring - Torsion spring - Provides high voltage connection to the toner cartridge (primary charging roller)
RA0-1173-000CN Support - Mounting support
RA0-1184-000CN Support - Right side cover mounting support
RG0-1013-000CN Tray - Printer input paper tray assembly - Includes bottom tray, blue paper length adjustment lever, and extension arm (Does NOT include the paper tray cover)

bottom bar

Helpfull Links:   | HP Printer Parts 1 2 3 4 5 | SmartSearch |
Home
       Contact Us        Support       Order Status       Site Map   

Copyright © 2016 Partshere.com   Privacy Policy     Terms and Conditions     Send us your Feedback