Part |
Picture |
Description |
RM1-3222-020CN |
Lifter-drive-assembly |
RM1-3222-150CN |
Lifter drive assy |
RM1-3225-000CN |
Front grip support assembly |
RM1-3226-000CN |
Rear grip support assembly |
RM1-3228-000CN |
Intermediate transfer belt (ITB) front lock support assembly |
RM1-3230-000CN |
Transfer contact holder assembly |
RM1-3232-000CN |
Thermopile case assembly |
RM1-3233-000CN |
Left side wall cover assembly |
RM1-3235-000CN |
Yellow partition plate assembly |
RM1-3237-000CN |
Magenta partition plate assembly |
RM1-3238-000CN |
Cyan partition plate assembly |
RM1-3239-000CN |
Right side wall cover assembly |
RM1-3240-000CN |
Intermediate transfer belt (ITB) drawer assembly |
RM1-3242-000CN |
Hewlett Packard fuser assembly kit / 110-127V FIXING assy Kit Part Number, Fuser Assembly - Bonds toner to paper with heat - For 110VAC to 127VAC (+/- 10%) operation. |
RM1-3242-030CN |
Fuser Assembly - For 110 VAC to 127 VAC (+/- 10%) operation - Bonds toner to paper with heat |
RM1-3244-000CN |
Fuser Assembly - Bonds toner to paper with heat - For 220VAC to 240VAC (+/- 10%) operation |
RM1-3244-030CN |
Fuser Assembly - For 220VAC to 240VAC (+/- 10%) operation - Bonds toner to paper with heat |
RM1-3247-000CN |
Fuser one way gear assembly |
RM1-3247-020CN |
Fuser one way gear assembly |
RM1-3250-000CN |
Photo sensor (SR26) assembly - Fuser home position sensor |
RM1-3252-000CN |
Main switch (SW11) holder assembly |
RM1-3253-000CN |
Formatter board cage assembly - Metal shield and enclosure for the formatter board |
RM1-3254-000CN |
Cartridge contact holder assembly |
RM1-3258-000CN |
Color plane registration sensor assembly |
RM1-3280-000CN |
Intermediate transfer belt (ITB) estrangement drive assembly |
RM1-3286-000CN |
Drum motor (M15) assembly - Drives the photosensitive drum and the primary charging roller in the black imaging drum |
RM1-3291-000CN |
Multi-purpose/tray 1 guide assembly |
RM1-3293-000CN |
Face down paper delivery assembly |
RM1-3293-010CN |
Face down paper delivery assembly |
RM1-3307-000CN |
Intermediate transfer belt (ITB) assembly HP Color LaserJet Transfer Kit. CP6015/CM6030/CM6040 Transfer Kit prints approximately 150, 000 pages |
RM1-3307-040CN |
Intermediate transfer belt (ITB) assembly HP Color LaserJet Transfer Kit. CP6015/CM6030/CM6040 TRANSFER Kit prints approximately 150, 000 pages |
RM1-3307-080CN |
Assy-Intermediate Transfer Belt |
RM1-3319-000CN |
2nd transfer roller assembly |
RM1-3333-000CN |
Right door sub assembly |
RM1-3340-000CN |
Face down end tray assembly |
RM1-3341-000CN |
Multi-purpose/tray 1 drop down door paper input tray assembly |
RM1-3345-000CN |
Multi-purpose/tray 1 paper pick-up assembly |
RM1-3345-110CN |
Mp. paper pick-up assy m.p. paper pick-up assy |
RM1-3354-000CN |
Rear mount cover plate assembly |
RM1-3356-000CN |
Printer front door assembly |
RM1-3357-000CN |
Front cover assembly - Plastic cover that protects the front door assembly |
RM1-3357-030CN |
Front Cover Assy |
RM1-3360-000CN |
Switchback cover assembly |
RM1-3364-000CN |
Exhaust fan assembly - Cools the fuser area |
RM1-3366-000CN |
Multi-purpose/tray 1 drive assembly |
RM1-3366-010CN |
Drive assembly - For use with multi-purpose/tray 1 |
RM1-3383-000CN |
Toner feed motor (M17) cable |
RM1-3385-000CN |
Toner feed motor (M16) cable |
RM1-3389-000CN |
Control Panel cable |
RM1-3390-000CN |
Face-down unit 1 cable |
RM1-3391-000CN |
Face-down unit 2 cable |
RM1-3423-000CN |
Dc controller pcb assy, DC controller board assembly - Mounts on the rear of the print engine frame (right of the formatter board). |
RM1-3423-020CN |
DC controller board assembly - Mounts on the rear of the print engine frame (right of the formatter board). Replacement clj2605dtn engine 110v. |
RM1-3436-000CN |
Pc board jumper from control panel pcb to formatter board. board sits on right plate assembly. boar has flat cable and connector j701 to j703. rk2-1253 rm1-3436 |
RM1-3450-000CN |
Laser Scanner Assembly, CLJ CP6015/CM6030/CM6040/CM6049 Series. |
RM1-3459-030CN |
DC controller board - DC Controller for LaserJet M5025/M5035 series |
RM1-3471-000CN |
Door switch - Indicates when toner cartridge door is open |
RM1-3474-000CN |
Door switch - Indicates when fuser door is open |
RM1-3492-000CN |
Laser Scanner Assembly for Hewlett Packard LaserJet 2605 color series units. (for non 1600 / 2600 see RM1-1970-000CN). |
RM1-3525-000CN |
Fuser Assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat - Slides in and locks in lower rear of printer |
RM1-3529-000CN |
500-sheet paper input tray - For use with tray 3, 4, or 5 |
RM1-3531-000CN |
Auto-close assembly - Use for the 1x500-sheet and the 3x500-sheet |
RM1-3531-060CN |
Auto-close assembly - Use for the 1x500-sheet and the 3x500-sheetAuto-close assembly - Use for the 1x500-sheet and the 3x500-sheet Replaced: RM1-3531-000CN |
RM1-3533-000CN |
1 x 500-sheet input tray paper pick-up assembly |
RM1-3533-010CN |
Paper Pick-Up Assy |
RM1-3537-000CN |
3 x 500-sheet paper input tray right door assembly |
RM1-3538-000CN |
1 x 500-sheet paper input tray right door assembly |
RM1-3559-000CN |
Intermediate paper transfer unit (IPTU) driver PCA assembly |
RM1-3560-000CN |
Drawer cable - Locaten on the fin lock assembly in the intermediate feed main body |
RM1-3561-000CN |
Intermediate paper transfer unit (IPTU) drawer connector cable assembly - Located on the fin lock assembly |
RM1-3563-000CN |
Motor cable - For media feed stepping DC motor (M202) |
RM1-3564-000CN |
Motor cable - For media feed stepping DC motor (M201) |
RM1-3569-000CN |
1 x 500-sheet input tray paper feed PCA assembly |
RM1-3569-030CN |
500 sheet input tray PCA PAPER FEED PCB ASSY PAPER FEED PCB ASSY |
RM1-3570-000CN |
Option paper sensor PCA assembly |
RM1-3571-000CN |
Paper pick-up option drawer cable |
RM1-3572-000CN |
Pick-up option door switch cable |
RM1-3573-000CN |
Pick-up option PCA connect cable |
RM1-3574-000CN |
Option sensor PCA connect cable |
RM1-3575-000CN |
Paper pick-up option cable - Used for the 1 x 500-sheet input tray |
RM1-3576-000CN |
Pick-up option lifter unit cable |
RM1-3581-000CN |
Dc controller pcb assy |
RM1-3581-050CN |
DC Controller PCB |
RM1-3582-000CN |
High voltage transfer PC board assembly |
RM1-3585-000CN |
Memory tag PCA assembly |
RM1-3589-000CN |
Interlock switch assembly - Where the right door open detection sensor (SR11) mounts on |
RM1-3594-000CN |
Low voltage power supply assembly |
RM1-3599-000CN |
MFP AC cable - Has connector J3005 on one side and J301 on the other |
RM1-3610-000CN |
DC controller board power cable |
RM1-3612-000CN |
Fixing joint cable |
RM1-3617-000CN |
Front cable - Connetcs the environment sensor, the delivery unit cooling fan, the cartridge front area cooling fan, and the VOC fan to the DC controler PC board |
RM1-3618-000CN |
Rear lower cable |
RM1-3619-000CN |
Rear upper cable |
RM1-3620-000CN |
Scanner joint cable |
RM1-3622-000CN |
Panel joint cable |
RM1-3623-000CN |
Interface joint cable |
RM1-3624-000CN |
Color plane registration joint cable |
RM1-3630-000CN |
Multi-purpose/tray 1 cable |
RM1-3640-000CN |
Waste toner sensor cable |
RM1-3641-030CN |
Paper feed PCA assembly - Located on the rear part of the high capacity input (HCI) feeder main body |
RM1-3647-000CN |
Multi-sensor cable - Used for the 3 x 500-sheet paper feeder tray |
RM1-3651-000CN |
Door open switch cable - Used for the 3 x 500-sheet paper feeder tray |
RM1-3652-000CN |
Reversing assembly for duplexer assembly |
RM1-3652-040CN |
Reversing assembly for duplexer assemblyDUPLEXING REVERSE ASS Y Replaced: RM1-3652-000CN |
RM1-3665-000CN |
Duplexing feed assembly |
RM1-3682-000CN |
Damper gear assembly - Includes 70-tooth gear and one way hinge - Located on the damper assembly |
RM1-3683-000CN |
Lower left side cover assembly - Located on the intermediate feed main body |
RM1-3683-020CN |
Side cover assy |
RM1-3684-020CN |
Drive belt assembly - Drives the paper feed belt |
RM1-3685-000CN |
Fin lock assembly |
RM1-3686-000CN |
Intermediate lowerr feed guide assembly |