| Part |
Picture |
Description |
| C2688-67107 |
EIO box assembly - Has expansion card slots |
| C2688-67109 |
Replacement print mechanism assembly - Includes printer base , chassis, carriage and paper motors, pivot, carriage, carriage plate, wing assemblies, and main logic harness |
| C2688-69001 |
Replacement DeskJet 2200 printer - Does not include power cord or ink cartridges |
| C3398A |
HP Business InkJet 2200/2250 paper input tray 2 - Holds 250 sheets |
| C4530-00033 |
Encoder strip spring |
| C4811A |
No. 11 cyan ink printhead |
| C4812A |
No. 11 magenta ink printhead |
| C4813A |
No. 11 yellow ink printhead |
| C4836AL |
No. 11 standard capacity cyan ink cartridge (holds 28ccs of ink) - Prints approximately1750 pages at 5% density per color (Latin America) |
| C4837AA |
No. 11 standard capacity magenta ink cartridge (holds 28ccs of ink) - Prints approximately1750 pages at 5% density per color (Asia/Pacific) |
| C4837AE |
No. 11 standard capacity magenta ink cartridge (holds 28ccs of ink) - Prints approximately1750 pages at 5% density per color (Europe) - |
| C4837AL |
No. 11 standard capacity magenta ink cartridge (holds 28ccs of ink) - Prints approximately1750 pages at 5% density per color (Latin America) |
| C4837AN |
HP 11 Standard Capacity Magenta Ink Cartridge - 28cc, prints approximately 1750 pages at 5% density per color (USA) |
| C4838AE |
No. 11 standard capacity yellow ink cartridge (holds 28ccs of ink) - Prints approximately1750 pages at 5% density per color (Europe) - |
| C5935A |
PCL5/PostScript 2 upgrade kit for HP 2200/2250 - Includes one PostScript 2 / PCL 5C upgrade module with integrated 96MHz processor and 16MB RAM |
| F1457B |
64MB, 100MHz, 3.3v, 144-pin SDRAM SO-DIMM memory module |
| F1457C |
64MB, 133MHz, 3.3v, 144-pin SDRAM SO-DIMM memory module |
| J3110A |
Ethernet 10Base-T (RJ-45) EIO network GENUINE HP JETDIRECT 600N internal print server PC board |
| J3112A |
JetDirect 600N token ring LAN interface board - DB-9 and RJ-45 connectors |
| J4167A |
JetDirect 610N token ring LAN interface board - DB-9 and RJ-45 connectors |
| J7934G |
HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM |
| C2688-67085 |
PCL5/PostScript 2 module |
| C2688-67088 |
Nameplate - DeskJet 2250 printer logo |
| C2688-67090 |
Cable assembly - Large 10-pin (M) connector with 3 pins not used to both a 3-pin (F) connector and a 5-pin (F) connector with 1-pin not used - Overall length is 35.3cm (13.9in) |
| C2693-67001 |
Tray extension assembly (Stopper) - Dark gray plastic tray with a paper stop that slides under the input tray - Extends to accomodate different media lenths |
| C2693-67005 |
Right side end cap - Covers the right side of the printer |
| C2693-67006 |
Keypad assembly |
| C2693-67008 |
Top/front access door assembly - Print cartridge access door - Includes the access door and the main back panel |
| C2693-67009 |
Main logic PCA cover - Has cut outs for the USB interface socket and parallel interface socket |
| C2693-67010 |
Main logic PCA - Configured for English font |
| C2693-67012 |
Power supply PC board - 100-240VAC input, 50/60Hz, 1.0A, 90 watts - 18VDC output (2.2A) and 32VDC output (0.64A), 60 watts max |
| C2693-67013 |
Power supply insulator - Black plastic shield |
| C2693-67014 |
Main Logic Harness - From the Main Logic board to Carriage Motor, Encoder board, Index Sensor, Output Motor, Line Feed Motor, and Service Station Motor |
| C2693-67017 |
Carriage drive motor assembly (includes pulley) |
| C2693-67020 |
Drive roller assembly - Includes shaft with 6 rollers, pivot assembly, and gears - Does not include plastic encoder disc |
| C2693-67022 |
Pivot Guide - C shaped plastic pieces that guides the Pivot on the Drive Roller |
| C2693-67023 |
Upper paper guide - Guides media through paper path |
| C2693-67024 |
Output roller assembly - Roller assembly at the front of the printer (where the paper comes out) - Includes shaft with 10 rollers and surrounding internal and external plastic |
| C2693-67025 |
Output belt - Drives the output roller |
| C2693-67027 |
Starwheel assembly - Includes starwheel chassis assembly and starwheels |
| C2693-67029 |
Rail cover - Mounts over the starwheel assembly |
| C2693-67031 |
Linefeed encoder disk |
| C2693-67036 |
Carriage PC board |
| C2693-67038 |
Spot sensor ribbon cable - Has 4-pin (F) connectors - 4.6cm (1.8in) long |
| C2693-67040 |
Service station motor |
| C2693-67041 |
Wiper - Cleans ink and debris from print nozzles |
| C2693-69054 |
Main Logic PCA - Flash ROM version for specialized fonts |
| C6821A |
Professional glossy InkJet brochure and flyer paper - A3 size (29.7cm x 42.0cm) - Glossy on both sides - 50 sheets per box |
| C8173-67019 |
Power supply PC board - 100-240VAC input, 50/60Hz, 1.0A, 90 watts - 18VDC output (2.2A) and 32VDC output (0.64A), 60 watts max |
| C8173-67022 |
Service station motor - Provides power to rotate service station assembly parts |
| C8173-67024 |
Spot sensor assembly - Mounts on the side of the carriage |
| J3258A |
External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN |
| J3258B |
External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN |
| J4155A |
External JetDirect 70X home print server - Uses telephone wiring to establish a local area network for remote printer operation - For Microsoft Windows 95/98/NT 4.0 - Uses 1Mbps HomePNA version 1.0 signals |
| J6060A |
HP Jet Direct 300X external print server module (Three pack) (10Base-T and 100Base-T) - Connects between printer parallel port and LAN network - Three Pack |
| C2697-67003 |
Case lock - Plastic C-clip on both sides of battery compartment |
| C2697-67004 |
I/O ESD film - Provides ESD protection for I/O PCA |
| C2697-67007 |
Key panel - Printer buttons and LEDs - At top of printer |
| C2697-67014 |
Power supply PCA - Input from battery or power jack PCA |
| C2697-67017 |
Power jack PCA - Power input jack from power module |
| C3397A |
DeskJet 350 Macintosh adapter - Connects HP DeskJet 340 to Macintosh - Includes I/O cable, driver and font disks |
| C3131A |
2MB, 70nS, 36-bit SIMM memory module - For HP LaserJet 4P, 4+, 4V, 5, 5N, 5M, 5P, 5Si |
| C3540-40017 |
Input tray support |
| C3540-60023 |
Ortho wiper assembly |
| C3540-60038 |
Front top cover - Allows attachment of cartridge access door - Does not include labels |
| C3540-60065 |
Heater and guide assembly |
| C3540-60233 |
Center drive assembly - Includes paper drive motor, drive rollers, and starwheels |
| C3540-90002 |
C3540A/C3541A DeskJet 1600C and 1600CM users guide (Finnish / Swedish) |
| C3540-90005 |
C3540A/C3541A DeskJet 1600C and 1600CM users guide (Spanish, Italian) |
| D3578-69001 |
32MB, 70nS, 36-bit parity SIMM memory module |
| C4530-40206 |
LFA gear cluster (Dual gear) |
| C4530-40254 |
IDS skirt - Small cover installs on right front of machine |
| C4530-40279 |
Rubber bumper foot |
| C4530-40293 |
Carriage base slider |
| C4530-60044 |
Cable assembly for HP DeskJet 2000 Series |
| C4530-60057 |
Cable assembly - Has 3-pin (F) connectors - 7.0cm (2.8in) long |
| C4530-60059 |
Color wiper - Cleans ink and debris from print nozzles |
| C4530-60136 |
Idler pulley assembly - Holds right end of carriage belt |
| C4530-60146 |
Main cable harness assembly with ferrites - Has many connectors: a large 10-pin (F), three 2-pin (F), four 3-pin (F), a 5-pin (F), a 6-pin (F), a 7-pin (F), a 9-pin (F), a 12-pin (F), and two 30-pin (F) - Overall length is 88.3cm (34.8in) |
| C4530-67000 |
Replacement printer - HP 2000C color printer |
| C4530-67812 |
Ink Delivery System - Carries ink from ink supply station to ink cartridges |
| C4530-67817 |
Ink supply station assembly |
| C4530-67910 |
Paper pickup roller cleaning kit |
| C4530-69308 |
Main logic PC board |
| C4530-69319 |
Main logic PC board - For the HP DeskJet 2000 C/N/se/xi series |
| C4530-69320 |
Main Logic PC board |
| C4530-69801 |
Print mechanism core - Includes carriage base assembly, carriage plate assembly, carriage shaft, carriage belt, paper path module, base assembly - Does not include other items such as service station or ink supply station |
| C4601-69002 |
Accessory paper tray/feeder assembly - Holds 250 sheets of paper |
| C4531-00001 |
Ground plane - Grounds the power supply and logic board (Old style) |
| C4531-00006 |
Ground plane - Grounds the power supply and logic board (New style) |
| C4531-40008 |
Key Pivot - Link between panel actuators and micro switches |
| C4531-40011 |
Carriage flex cable clip - Holds the flex cable |
| C4531-40024 |
Tray latch - Holds paper tray in place |
| C4531-40029 |
Ink cartridge access cover - Lift-up top/front cover |
| C4531-40032 |
Nameplate bezel - Attaches to the left front of cover |
| C4531-60014 |
Pressure plate assembly - Lifts paper stack to be printed |
| C4531-60017 |
Light pipe assembly - Transfers light from LED to keypad assembly - Includes keypad buttons and actuator links |
| C4531-67803 |
Head drive PCA - Has temperature and optical sensors - Drives the print cartridge |
| C4531-80011 |
Wing holder - Secures output tray wings during shipping |
| C4531-80020 |
Carton - Cardboard Shipping Carton |
| C4531-80041 |
Nameplate - DeskJet 820CXI printer logo |
| C4555-00002 |
Paper motor ground strap |
| C4555-67804 |
Pivot - Large plastic item which contains the Pickup Rollers |
| C5876-40008 |
Power button actuator - Power button/arm from front panel |
| C4547-40001 |
Nameplate - C4547A DeskJet 600C printer logo |
| C4547-60003 |
C4547A DeskJet 600C users guide (US English) |
| C4548-40001 |
Nameplate - C4548A DeskJet 660Cse printer logo |
| C4548-60003 |
C4548A DeskJet 660Cse users guide (US English) |
| C4549-40001 |
Top cover - Main upper housing with molded input tray - Does NOT include cartridge access top cover - Quartz Gray |
| C4549-40009 |
Nameplate - C4549A DeskJet 680 Printer logo |
