C2621A-AbsorberAbsorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
0950-2435AC Adapter - Power supply module (Autoranging) - 100-240VAC input, 50/60Hz, 0.35-0.2A, 30-50VA, requires separate AC power cord - 10.6VDC output, 1.32A, 17 watts - For worldwide use
C2621A-AC_AdapterAC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
C2621A-ActuatorActuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
C2621A-Arm_DeliveryArm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
C2621A-Carriage_AssyCarriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
C2621A-Carriage_BaseCarriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
C2621A-Carriage_BeltCarriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
C2621A-Carriage_CableCarriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
C2621A-Carriage_Latch_CVRCarriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
C2621A-Carriage_MotorCarriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
C2621A-Carriage_OnlyCarriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
C2621A-Carriage_PC_BRDCarriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
5183-5267Cartridge - Return kit with box and instructions - For returning defective Thermal InkJet (TIJ) 2.0 cartridges
C4039ACase - Carrying case - Will also hold notebook computer
C3004ACharger - Portable recharger for DeskJet Portable and DeskJet/DeskWriter 310, 320, 340 - Powers printer, charges battery pack inside printer, charges up to 2 battery packs outside printer - Includes AC power cord for 120V in USA/Canada
C3060ACharger - Portable recharger for DeskJet 300J - Powers printer, charges battery pack inside printer, charges up to 2 battery packs outside printer - Includes power cord for 100VAC in Japan
C3062ACharger - Portable recharger for DeskJet/DeskWriter 3xx - Powers printer, charges battery pack inside printer, charges up to 2 battery packs outside printer - Includes power cord for 240VAC operation in UK
C3063ACharger - Portable recharger for DeskJet/DeskWriter 3xx - Powers printer, charges battery pack inside printer, charges up to 2 battery packs outside printer - Includes power cord for 230VAC operation in Europe
C3064ACharger - Portable recharger for DeskJet/DeskWriter 3xx - Powers printer, charges battery pack inside printer, charges up to 2 battery packs outside printer - Includes power cord for 240VAC operation in Australia, New Zealand, China
C2621A-ChassisChassis - Chassis assembly - the large plastic item that forms the base of the print mechanism
C2621A-Clutch_FeedClutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.
C2655-69000Color InkJet - DeskJet for DeskJet 320, DeskJet 340 Series
C2621A-Control_PanelControl Panel - Control panel assembly - control buttons and display on top front of the unit.
C2621-60216Cover - Battery access cover - For battery compartment on bottom of printer
C2621A-Cover_BackCover Back - Back cover of printer, it is usually removed to clear paper jams.
C2621A-Cover_CartridgeCover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
C2621A-Cover_MainCover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
C2621A-DeflectorDeflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
C2621A-Print_MchnsmPrint Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
C2621A-Repair_InkJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C2621A-Sensor_OutSensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray
C2621A-Sensor_SpotSensor Spot - Spot sensor assembly is attached to the carriage assembly.
C2621A-SeparatorSeparator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
C2621A-GuideService Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.