C2643A-AbsorberAbsorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
C2643A-AC_AdapterAC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
C2643A-ActuatorActuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
C2643A-Arm_DeliveryArm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
C2162-60009Cable - Cable assembly - Has 5-pin (F) connector on each end - 26.5cm (10.4in) long
C2643A-Cable_CarriageCable Carriage - Cable assembly which connects the main logic board to the carriage motor
C2643A-Cable_InterfaceCable Interface - Parallel cable - connects from your printer to computer via your parallel port.
C2643A-Cable_MchnsmCable Mechanism - Cable assembly which connects the main logic board to the print mechanism
C2643A-Cable_PanelCable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.
C2643A-Cable_USBCable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.
C2643A-CamCam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position
C2643A-Cap_LifterCap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.
C2164-67809Carriage - Ink cartridge carriage assembly - Includes trailing cable
C2643A-Carriage_AssyCarriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
C2643A-Carriage_BaseCarriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
C2643A-Carriage_BeltCarriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
C2643A-Carriage_CableCarriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
C2643A-Carriage_Latch_CVRCarriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
C2643A-Carriage_MotorCarriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
C2643A-Carriage_OnlyCarriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
C2643A-Carriage_PC_BRDCarriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
5183-5267Cartridge - Return kit with box and instructions - For returning defective Thermal InkJet (TIJ) 2.0 cartridges
C2643A-ChassisChassis - Chassis assembly - the large plastic item that forms the base of the print mechanism
C2162-00011Clip - ESD clip - Protects stepper motor from ESD damage
C2643A-Clutch_FeedClutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.
C2643A-Control_PanelControl Panel - Control panel assembly - control buttons and display on top front of the unit.
C2164-40101Cover - Top cover - Main upper housing with molded input tray - Does NOT include cartridge access top cover
C2643-60104Cover - I/O cover - Allows access to logic PCA I/O port connector
C2643A-Cover_BackCover Back - Back cover of printer, it is usually removed to clear paper jams.
C2643A-Cover_CartridgeCover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
C2643A-Cover_MainCover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
C2643A-DeflectorDeflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
C2184-69012Print Mechanism - Print mechanism assembly - Complete mechanism with carriage movement, paper picking and service station (quiet kick)
C2643A-Print_MchnsmPrint Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
C2643A-Repair_InkJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C2162-20005Rod - Carriage rod - Supports horizontal carriage movement
C2643A-Sensor_OutSensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray
C2643A-Sensor_SpotSensor Spot - Spot sensor assembly is attached to the carriage assembly.
C2643A-SeparatorSeparator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
C2643A-GuideService Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
C6450-60020Service Manual - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1
C6450-60021Service Manual - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1
C2164-67811Service Station - Service station assembly with motor - Mechanical assembly that moves the service station sled
C2643A-Service_StationService Station - Service station assembly - for conditioning the printheads when the carriage is in its home position
C4562-60045Service Station - Service station assembly - Includes motor
C6450-60102Sled - Service station sled assembly - Mounts on top of the service station - Performs capping and wiping functions for the print cartridges
C2643A-SLED_AssySLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly
C2643A-SliderSlider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.
C4549-40025Slider - Rear slider - Prevents the carriage from tilting forward
C2643A-SpittonSpitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process
C2124-00001Spring - Encoder spring - Provides tension for encoder strip
C2124-20008Spring - Limiter spring - Provides tension for rotation limiter
C2145-00017Spring - Lever arm spring - Provides tension between the lever arm and the pressure plate lifter
C2162-20004Spring - Pivot spring - Provides tension for pivot to return to upright position
C2162-67806Spring - Preloader - Applies downward pressure on drive shaft
C2164-00016Spring - Sled bias spring - Holds sled in position in service station
C2643A-Spring_CmprsnSpring Compression - Compression spring - on pulley wedge for carriage belt tension
C6822AStickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C6823AStickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C4549-60035Stop - Paper width adjustment stop - Adjusts for input paper width
C6450-60007Stop - Output tray extender, length adjustment, and paper catch
C4562-60018Storage System - Garage assembly - Holds print cartridge when not in use - Also referred to as a 'cartridge humidor'
C2124-80008Strip - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position
C2643A-Trailing_CblTrailing Cable - Trailing cable for scanner - cable connects from scanner to pc board.
C2164-67808Tray - Paper output tray assembly - Includes output tray, left and right wings, envelope spring - Contains slot so single envelopes may be fed into printer mechanism
C2643A-Tray_AssyTray Assembly - Paper input tray assembly for loading paper (bottom).
C2643A-Tray_Assy_CVRTray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit.