HP parts list for C2848A HP DesignJet 600 Printer (E/A0-size)
5188-6700Adapter - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector
541481-001-00Adapter - Universal AC power adapter - wide-range 40c - Requires separate country-specific power cord with C7 connector. Motorola 541481-001-00 EADP-15PB ONT1120GE-PS 12V Power Supply Delta Electronics
C2858-60115Bail - Bail assembly - Has star wheel assemblies attached
1500-0855Belt - HP Designjet 600, 650C Motor Belt (Small belt).Y axis drive belt.
1500-0856Belt - Carriage belt for HP DesignJet 36inch size plotters.
C1633-40038Bracket - Left bail bracket for Hewlett Packard Designjet Plotters.
C2847-00051Bracket - Y-tensioner bracket on left side plate
C1633-40082Bushing - Pincharm spring retaining bushing
C3195-40064Bushing - Rear slider rod bushing (Spring loaded) - Slides into the rear center of the carriage assembly
17255DCable - RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long
17302ACable - RS-232C serial cable - 25-pin (M) to 8-pin (M) DIN - 1.5m (4.9ft) long
24540-80010Cable - Centronics (parallel) cable - 36-pin (M) to 25-pin (M) - 2.0m (6.6ft) long
24542GCable - RS-232C serial cable - 25-pin (M) to 9-pin (F) - 3.0m (9.8ft) long
5063-1256Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
5063-1257Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
A6144-63008Cable - RS-232C serial cable - 25-pin (M) to 9-pin (F) - 3.0m (9.8ft) long
C1633-60050Cable - Carriage assembly trailing cable - 28-pin (F) connector to 28-pin (F) connector attached to mounting hardware - 1.6m (5.3ft) long
C2847-60019Cable - Ribbon cable - 5-pin (F) connector to 5-pin (F) connector - 40.3cm (15.9in) long
C2847-60034Cable - Ribbon cable - Has 12-pin (F) connectors - 1.2m (3.9ft) long
C2913ACable - RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long
C2950ACable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
C2951ACable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
C2990ACable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long
C2991ACable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long
C1633-40052Cam - Bail lift cam - Activates the bail lift lever (part of the bail lift mechanism kit)
C2858-40043Cap - Spindle end cap - Small core spacer - Removes for loading the media roll. Please order spindle assembly.
C3172-40006Cap - Spindle end cap - Small core spacer - Removes for loading the media roll. Please order spindle assembly.
C1633-60120Carriage - Carriage assembly - Includes carriage PC board. HP carriage assembly used in specific Hewlett-Packard DesignJet wide-format printers C2847A C2848A Designjet 600 200 220 and similar models.
C2847-60071Carriage - Carriage assembly - Includes carriage PC board. HP carriage assembly used in specific Hewlett-Packard DesignJet wide-format printers C2847A C2848A Designjet 600 200 220 and similar models.
5183-5267Cartridge - Return kit with box and instructions - For returning defective Thermal InkJet (TIJ) 2.0 cartridges
1492-0145Caster - Lockable caster assembly - Includes stem and washer
C6247ACleaner - DesignJet cleaning kit - Includes cleaning solution and 20 cleaning rags
C1633-40092Clip - Starwheel clip for HP DesignJet-C1633A
C2847-60057Control Panel - Control panel assembly control panel assembly for the Hewlett Packard DesignJet 650C plotter.
C2847-60087Control Panel - Control panel assembly control panel assembly for the Hewlett Packard DesignJet 650C plotter.
C1633-40047Cover - Right end cover - For end of upper stand (Chassis) assembly
C2847-60062Cover - Left end cover assembly - For end of upper stand (Chassis)
C4706-60084Cover - Rollfeed access cover - Opens forward to allow access to paper spindle assembly - Includes cover and springs
C3186-00034Cross Brace - Cross-brace - Brace that connects and supports the two stand legs
C2858-60021Cutter - Cutter mechanism assembly - Auto cutter for rollfeed paper
3160-0814Fan - Tubeaxial fan (Matsushita FBK-09A12M2-MOD) - 82.5mm (3.25in) mount hole spacing, 25.5mm (1.0in) thick, 12VDC, 35.3CFM
51642AFilm - Polyester matte film - 61cm (24in) x 36.6m (120ft) roll
51642BFilm - Polyester matte film - 91.4cm (36in) x 36.6m (120ft) roll
51642CFilm - Polyester matte film - B size (11 x 17-inches) - 40 sheets
51642FFilm - Film (Matte) for DesignJet-C1633A, DesignJet 600, DesignJet 650, DesignJet 200 D size
51642GFilm - Polyester Matte Film - D Size - 22 x 34 inches (40 Sheets)
51642HFilm - Film (Matte) for DesignJet-C1633A, DesignJet 600, DesignJet 650, DesignJet 200 D size
51642JFilm - Polyester matte film - Architectural D size (24 x 36-inches) - 40 sheets
51642KFilm - Polyester matte film - E size (34 x 44-inches) - 40 sheets
51642NFilm - Polyester matte film - Architectural E size (36 x 48-inches) - 40 sheets
C2847-60089IC ROM - ROM (Firmware) kit (Version 3.4) - For main logic board
J2552AJetDirect - JetDirect CARD RJ45 10 BASE-T INTERNAL PRINT SERVER 10-100Base-TX or 10Base-2 Local Talk
J2593AJetDirect - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) input connectors and three parallel (DB-25) output connectors w/power supply.
J4106-60002JetDirect - Hewlett Packard HP JetDirect 400N Internal Print Server J4106-60002 J4106A ID FOR RECV ONLY ORDER J4106-61001 (INTL USE ONLY)
C2847-60061Kit - Hardware kit - Package of 6 screws for stand assembly
C3195-00057Label - Safety label - Provides warning that encoder strip is sharp
C2848-60002Leg - Leg assembly - Side support with foot bar and two casters
C2847-40013Lever - Bail engaging lever - Used to move engaging lever gear
C2858-60209Lifter - Bail lift mechanism kit - Includes cam gear, engaging lever, engaging lever gear, engaging lever spring, Y-tensioner bracket, bail lift cam, cam gear support, screws, and washers
C6072-60281Manual - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (English)
C6072-60301Manual - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (English)
C1633-00019Media Bin - Media bin back - For top of wire rack below plotter
C1633-00020Media Bin - Media bin front - Main part of wire rack below plotter
C1633-00044Media Bin - Media bin adjust - Adjustable media bottom stop in wire rack
C2065AMemory - 4MB, 80nS, 36-bit SIMM memory module - For HP Plotters, LaserJet IIISi, 4/4M, 4Si/MX and other models.
C2066AMemory - 8MB, 80nS, 36-bit SIMM memory module - For HP LaserJet IIISi, 4/4M, 4Si/MX
J2382-69003Module - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
J2383-61005Module - External token ring interface module - Has DB-9 connector
J2590-61011Module - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors
J2590-69001Module - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors
J2592-61001Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
J2592-69001Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
J2593-69001Module - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) input connectors and three parallel (DB-25) output connectors w/power supply.
J2594-61011Module - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors
J3258-61021Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
J4102-61021Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
J4102-69022Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
3140-0854Motor - Stepper motor for HP DesignJet 600 D size
C2847-60221Motor - Motor assembly - Includes power cable
C2848-60003Motor - Motor/encoder assembly (includes helical drive gear) - 'X' axis drive - NOTE: motor and gear are only sold as a set
C2847-00038NamePlate - Nameplate - DesignJet 600 printer logo
C4706-60121Overdrive Assembly - Overdrive support assembly (E)
C2847-60023Overlay - Control panel overlay (English)
C2847-60024Overlay - Control panel overlay (German)
C2847-60025Overlay - Control panel overlay (Spanish)
C2847-60026Overlay - Control panel overlay (French)
C2847-60027Overlay - Control panel overlay (Japanese)
C2847-60028Overlay - Control panel overlay (Italian)
C2847-60032Overlay - Control panel overlay (Portuguese)
C3196-60113Packaging - Repackaging Kit - for Main Plotter Unit
C1860APaper - HP Bright white InkJet paper - 61cm (24in) x 45.7m (150ft) roll
C1861APaper - HP Bright white InkJet paper - 91.4cm (36in) x 45.7m (150ft) roll
C3850APaper - Opaque bond paper - 91.4cm (36in) x 45.7m (150ft) roll
C3851APaper - Opaque bond paper - 61cm (24in) x 45.7m (150ft) roll
C3854APaper - Opaque bond paper - Architectural E size (36 x 48-inches) - 100 sheets
C3855APaper - Bright White Inkjet Paper - 61cm (24in) x 45.7m (150ft) roll
C3859APaper - Paper - transparencies, continuous forms - Roll A0 91.4 cm x 45.7 m) - 67 g/m2 - 1 pcs.
C6020BPaper - Coated paper (98 gsm) - 91.4cm (36in) x 45.7m (150ft) roll (USA, Canada, and Latin America)
C6036APaper - Bright white InkJet paper - 91.4cm (36in) x 45.7m (150ft) roll
J2373-60001PC Board - Token ring interface board - Has DB-9 connector
J2550-69013PC Board - EtherTwist 10Base-T LAN interface board
J2555-69013PC Board - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors
J3258-61011PC Board - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
J4100-69001PC Board - JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors
J2550BPC Board Interface - EtherTwist (10Base-T) LAN interface board, JetDirect card has one 10 Mbps RJ45 Ethernet connector.
J2552BPC Board Interface - LAN and LocalTalk interface - Has EtherTwist (10Base-T) , ThinLAN (10Base-2) , and LocalTalk (DIN-8) connectors
J2555BPC Board Interface - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors
J2590APC Board Interface - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors
J2591-69001PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
J2591APC Board Interface - External JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
J2594-69001PC Board Interface - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors
J3258-61041PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
J3258BPC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
J3264APC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN
J3265-69001PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors
J3265GPC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
J4101BPC Board Interface - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network
J4102BPC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
C1633-60039Pinch Assembly - Pincharm assembly - Curved black plastic plate with four small rubber rollers - Does NOT include spring or bushing
8120-0698Power Cord - Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in the USA and Canada)
8120-1351Power Cord - Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei)
8120-1369Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China)
8120-1378Power Cord - Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam)
8120-1689Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam)
8120-2104Power Cord - Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Switzerland)
8120-2956Power Cord - Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Denmark)
8120-4211Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in South Africa and India)
8120-4753Power Cord - Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 100V in Japan)
8120-6302Power Cord - Daisy chain power cord (Dove Gray) - 18 AWG, 1.2m (4.0ft) long - Has C14 (M) plug for power input and C13 (F) plug for power output
8121-0877Power Cord - Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in the USA and Canada)
0950-2372Power Module - Power supply module - 100-240VAC input, 47-63Hz, requires separate AC power cord - 5VDC output, 1A, 5 watts
0950-3169Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.
0950-3171Power Module - Power supply module - 220-240VAC input, 47-53Hz - 13VDC output, 300mA (U. K. and Hong Kong)
0950-3349Power Module - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector Power supply module - 120VAC input, 60Hz - 12VDC output, 1.0A
0950-3351Power Module - Wall mount power supply module (MEI-AH ED12009) - 220VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (South Korea)
0950-3352Power Module - Wall mount power supply module (MEI-AH ED12010) - 100VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (for use in Japan)
0950-3354Power Module - Wall mount power supply module (MEI-AH ED12010) - 220-250VAC input, 47-53Hz - 13VDC output, 800mA, 10.4 watts (South Africa)
0957-2109Power Module - Power supply module - 209-253VAC input, 47-53Hz - 13VDC output, 800mA (Europe and Israel)
0957-2110Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.
0957-2134Power Module - Wall mount power supply module (MEI-AH ED12010) - 100VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (for use in Japan)
0957-2197Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.
0957-2340Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.
C3195-60168Power Module - Power Supply Board for Hewlett Packard Plotters.
0950-2623Power Supply - Switching power supply (Delta DPS-158ABA) - 100-240VAC input, 47-63Hz - Four DC outputs (5.15V, +12V, -12V, 24V) - 158 watts - Includes upgrade sticker
0957-2192Power Supply - Power supply module - 209-253VAC input, 47-53Hz - 13VDC output, 800mA (Europe and Israel)
0957-2194Power Supply - Wall mount power supply module (MEI-AH ED12009) - 220VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (South Korea)
0957-2228Power Supply - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.
0957-2229Power Supply - Power module (wall mount)- Input voltage 220-250VAC, 47/53Hz - Output voltage 13VDC, 800mA, 10.4W (Worldwide)
5188-5673Power Supply - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector Power supply module - 120VAC input, 60Hz - 12VDC output, 1.0A
J2371-60001Print Server - EtherTwist (10Base-T) Interface Board (J2371A)
J3265APrint Server - External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
J4100-61001Print Server - JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors
J4101-61011Print Server - External JetDirect LAN interface module with EtherTwist 10Base-T/100BaseTX connector
J4169-61001Print Server - JetDirect 610N Internal Print Server (10Base-T and 100Base-TX) LAN Interface Board - Has one RJ-45 connector
07570-60105Pulley - Idler pulley - For main drive belt
07570-60112Pulley - Idler drive pulley - Applies tension to the pen carriage drive belt (small belt)
C3170-60009Pulley - Reduction pulley - Includes 2 Bearings Shaft (0.16in Diameter on Both Ends) Flange Pulley and Instructions
C2848A-Repair_DesignJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C2859-60004Roller - Paper drive (platen) roller assembly - Long gear driven roller
C4700-60042Roller - Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder
C4704-60199Rollfeed Assembly - Brake/housing assembly (on right side) - Accepts the flange end of the spindle rod assembly - Includes the 2 housing pieces, 2 brake shoes, brake gear, brake lever, and springs
C2847-60021Sensor - Media sensor assembly - Includes cable
C2847-60022Sensor - Pincharm sensor - Includes cable
C3180-60034Sensor - Pincharm sensor - Includes cable
C2848A-Manual_DesignJetService Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams.
C7769-90066Service Manual - DesignJet support DVD-ROM - Version A.04.01 - Has product information, user's manuals, service manuals, diagnostic software, test drawings, newsletters, and service notes
C2847-60083Service Station - Hewlett Packard Service station kit assembly for Designjet and Plotters.
C6072-60284Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (German)
C6072-60285Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (French)
C6072-60286Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (Spanish)
C6072-60287Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (Italian)
C6072-60304Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (German)
C6072-60305Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (French)
C6072-60306Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Spanish)
C6072-60307Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Italian)
C2848-60011Spindle - Rollfeed spindle rod assembly (E-size 36 inch ) - Includes spindle and end caps
C3173ASpindle - E/A0 rollfeed spindle rod assembly for DesignJet 6xx/7xx - Includes spindle and end caps
C1633-80004Spring - Extension spring - Holds the rollfeed access cover closed
C1633-80005Spring - Compression spring - Installed between pincharm assembly and bushing
C1633-80014Spring - Compression spring - For the rear bushing on the carriage
C1633-60051Starwheel - Starwheel assembly - Small plastic wheel with metal teeth
C4713-60035Starwheel - Starwheel mount assembly - Includes cover, body, spring and two starwheels
C4714-60098Strip - Encoder strip assembly (E-size) - Includes encoder strip and encoder strip spring. Encoder strip 36" for HP DesignJet 700 750 430 450 and similar units.
Repair It
Exchange It
View Supplies
Service Manual
