C2145-60071Absorber - Blotter (absorber) assembly - Includes frame and blotter pads
C2145-80021Absorber - Blotter pad - Cleans the ink cartridge before being capped - Narrow pad for black ink cartridge (one per package)
C2145-80022Absorber - Blotter pad - Cleans the ink cartridge before being capped wide pad for color ink cartridge (one per package)
C4569A-AbsorberAbsorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
C4569A-AC_AdapterAC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
C2145-40046Actuator - Door actuator - Actuates access door open switch
C4555-40064Actuator - Form feed actuator - Form feed button/arm from front panel
C4555-40065Actuator - Power button actuator - Power button/arm from front panel
C4569A-ActuatorActuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
C2145-40059Adjuster - Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
C2145-40090Adjuster - Pivot stop adjuster - Installed near left end of carriage plate
C4555-40043Adjuster - Z axis service station adjustment (ZASSA)
C2145-40020Arm - Lever arm - Provides linkage between the pivot assembly and the pressure plate lifter
C4555-40066Arm - Clutch actuator arm - Used to engage the pivot gears
C4569A-Arm_DeliveryArm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
C4569A-Cap_LifterCap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.
C2145-67851Carriage - Carriage assembly - Does not include trailing cable
C4569A-Carriage_AssyCarriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
C4569A-Carriage_BaseCarriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
C4569A-Carriage_BeltCarriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
C4569A-Carriage_CableCarriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
C4569A-Carriage_Latch_CVRCarriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
C4569A-Carriage_MotorCarriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
C4569A-Carriage_OnlyCarriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
C4569A-Carriage_PC_BRDCarriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
C4555-67803Chassis - Print mechanism chassis assembly - The base structure of the print mechanism - Replacement for type 3 mechanisms only - Ensure the pivot gear has horizontal (Not helical) teeth
C4569A-ChassisChassis - Chassis assembly - the large plastic item that forms the base of the print mechanism
C2145-40084Clamp - Nose clamp - Holds black cartridge in place
C2145-40085Clamp - Nose clamp - Holds color cartridge in place
C2145-40101Clamp - Right pivot clamp (Right Z-STOP) - Holds the right end of the pivot assembly in place
C2145-40117Clamp - Left pivot clamp (Left Z-STOP) - Holds the left end of the pivot assembly in place
C4531-40009Clamp - Belt attachment - Anchors drive belt to carriage
C4555-40062Clamp - Carriage flex clamp - Houses the flex cable Preloader clamp - Holds carriage pre-loader and spring
C4555-40063Clamp - Chassis clamp - Retains chassis in the base assembly
C4569A-Clutch_FeedClutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.
C4569A-Control_PanelControl Panel - Control panel assembly - control buttons and display on top front of the unit.
C2145-00016Cover - Power supply cover - Shields and protects power supply PC board
C4555-40046Cover - Top cover - Does not include carriage access door
C4555-40049Cover - Side cover - Service station access door
C4569A-Cover_BackCover Back - Back cover of printer, it is usually removed to clear paper jams.
C4569A-Cover_CartridgeCover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
C4569A-Cover_MainCover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
C4569A-DeflectorDeflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
C2145-40083Preloader - Carriage pre-loader - Holds the carriage against the carriage rod
C4555-67805Preloader - Drive roller pre-loader - Applies tension to the drive roller shaft
C4531-60014Pressure Assembly - Pressure plate assembly - Lifts paper stack to be printed
C4555-67801Print Mechanism - Complete Mechanism - Includes Mechanical Carriage Movement,
C4555-69801Print Mechanism - Complete mechanism - Includes mechanical carriage movement, paper picking, and service station operations
C4569A-Print_MchnsmPrint Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
C4569A-Repair_InkJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C2145-20019Retainer - Washer retainer - Holds carriage rod lubrication washers in place
C2145-20007Rod - Carriage rod - Shaft that the carriage assembly rides on
C4569A-SeparatorSeparator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
C4569A-GuideService Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
C6450-60020Service Manual - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1
C6450-60021Service Manual - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1
C2145-67812Service Station - Service station tumbler assembly
C2145-67850Service Station - Service station housing assembly
C4569A-Service_StationService Station - Service station assembly - for conditioning the printheads when the carriage is in its home position
C4602-67901Service Station - Service station kit - Includes housing, absorber, pre-filter, cartridge blotter pads, tumbler assembly, tools, and instructions
C4555-00006Shield - EMI shield for HP DeskJet 870C Series
C4569A-SLED_AssySLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly
C4569A-SliderSlider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.
C2145-00046Spring - Pivot spring - Provides tension for the pivot
C4569A-Spring_CmprsnSpring Compression - Compression spring - on pulley wedge for carriage belt tension
C6822AStickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C6823AStickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C2145-00042Stiffener - Encoder stiffener - Prevents oscillation of encoder strip
C2145-80016Strip - Encoder strip - Carriage position sensor reference
C2145-40151Support - Chimney wall - Wall support of spittoon
C4555-40051Support - I/O deck - Holds wings and single sheet width adjuster
9301-1717Tool - 35cc syringe - For use with carriage slider rod lubricant
C4569A-Trailing_CblTrailing Cable - Trailing cable for scanner - cable connects from scanner to pc board.