HP parts list for C4662A HP officejet 300 all-in-one printer
C2890-80026Absorber - Ink absorber for HP OfficeJet 330 Series
C4662A-AbsorberAbsorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
C4662A-AC_AdapterAC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
C4662A-ActuatorActuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
C4662A-ADF_ArmADF Arm - Senses paper in the ADF area tray / feeder tray. this is a front flapper arm - part of the paper separation mechanism for the paper pickup assembly - mounts just in front of the front separation belts in the ADF assembly.
C4662A-ADF_Feed_AssyADF Feed Assembly - ADF assembly - does not include ADF input tray. ADF assembly includes the complete ADF assembly (motor, gears, rollers, sensor, does not include the ADF pad or plastic flatbed cover. (for entire unit please see ADF unit assembly).
C4662A-ADF_Input_TrayAdf Input Tray - ADF tray ( for automatic document feeder) this is where papers are placed for feeding into unit.
C4662A-ADF_MotorADF Motor - ADF motor - the scanner ADF motor is located on left rear corner of ADF drive, location varies from each unit. however, this is the main motor on the ADF unit.
C4662A-ADF_Output_TrayADF Out Put Tray - ADF out put tray is where paper come out of ADF (automatic document feeder). For this unit we will ship the entire ADF Assembly.
C4662A-ADF_PadADF Pad - ADF paper seperation pad assembly - mounts in the center of the ADF separation pad frame assembly. this pad prevents from multiple feeding or preventing paper jams while faxing scanning or copying.
C4662A-ADF_Roller_KitADF Roller Kit - ADF upper pick roller replacement kit. these are the rollers that feed paper into the feeder to be scan copy or faxed.
C4662A-ADF_ScannerADF Scanner - ADF scanner (optical) assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - this is the lower assembly that scans copies documents.
C4662A-ADF_Sensor_BRDADF Sensor Board - ADF sensor pc board assembly - narrow strip pc board with the two document skew sensors, registration sensor, and timing sensor - mounts on top of the registration guide assembly in the ADF main assembly
C4662A-ADF_Unit_AssyADF Unit Assembly - Complete replacement assembly unit for Officejet Copier top assembly only. This includes the ADF (automatic document feeder) for this unit.
C2890-40076Adjuster - Adjuster - Used to adjust pen-to-paper spacing
C4662-69001All-In-One InkJet - Replacement OfficeJet (Option ABA: US - English) - For HP HP repair use ONLY
C4662-69002All-In-One InkJet - Replacement OfficeJet (Option ABF Canada/France) - For HP authorized service only
C4662-69007All-In-One InkJet - Replacement OfficeJet (Option ABF Canada/English) - For HP authorized service only
C2890-40070Arm - Lever arm - Used to lift the pressure plate lifter
C4662A-Arm_DeliveryArm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
C2950ACable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
C2951ACable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
C2990ACable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long
C2991ACable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long
C6735-80001Cable - Telephone cable (2-wire) - RJ11 (M) connectors - 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal, and Spain)
Q3500-80001Cable - Telephone cable (2 Conductor) - RJ11 (M) to RJ11 (M) 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal and Spain)
C4662A-Cable_CarriageCable Carriage - Cable assembly which connects the main logic board to the carriage motor
C4662A-Cable_InterfaceCable Interface - Parallel cable - connects from your printer to computer via your parallel port.
C4662A-Cable_MchnsmCable Mechanism - Cable assembly which connects the main logic board to the print mechanism
C4662A-Cable_PanelCable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.
C4662A-Cable_USBCable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.
C4662A-CamCam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position
C2890-40068Cap - Left/right lifter cap - Holds the pressure plate lifter in place
C2890-40075Cap - Center lifter cap - Holds the pressure plate lifter and the kicker spring in place
C4662A-Cap_LifterCap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.
C2890-60082Carriage - Carriage assembly - Includes flex cable and bushings
C4662A-Carriage_AssyCarriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
C4662A-Carriage_BaseCarriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
C4662A-Carriage_BeltCarriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
C4662A-Carriage_CableCarriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
C4662A-Carriage_Latch_CVRCarriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
C4662A-Carriage_MotorCarriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
C4662A-Carriage_OnlyCarriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
C4662A-Carriage_PC_BRDCarriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
5183-5267Cartridge - Return kit with box and instructions - For returning defective Thermal InkJet (TIJ) 2.0 cartridges
C2890-60052Chassis - Print mechanism chassis assembly - The base structure of the print mechanism
C4662A-ChassisChassis - Chassis assembly - the large plastic item that forms the base of the print mechanism
1400-1724Clamp - Clamp - Cable tie installed to top of power supply cover and main PCA shield
C2890-40031Clutch - Clutch drum - Installed between clutch spring and left bushing on shaft of stripper roller
C4662A-Clutch_ADFClutch ADF - ADF paper clutch unit. clutch that controls movement on the ADF feeder
C4662A-Clutch_FeedClutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.
C2890-60013Connector - Power input connector and cable assembly
C3800-60001Control Panel - Control panel panel assembly - Does NOT include the overlay
C4662A-Control_PanelControl Panel - Control panel assembly - control buttons and display on top front of the unit.
C2890-40001Cover - Main cover - Covers front, rear and both sides - Does not include other items such as top access cover, control panel, overlay, or paper trays
C2890-40038Cover - Lens cover - Installed near the rear of the scanner module assembly
C2890-60064Cover - Top cover/access door - Includes fax/copy input tray and flip out extension for legal size documents
C4662A-Cover_BackCover Back - Back cover of printer, it is usually removed to clear paper jams.
C4662A-Cover_CartridgeCover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
C4662A-Cover_MainCover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
C2128-00051Damper - Carriage belt damper - Installed under right end of carriage belt
C4662A-DeflectorDeflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
C4662A-Door_CarriageDoor Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open.
C4662A-Door_CartridgeDoor Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.
C4662A-Door_RearDoor Rear - Rear cleanout door assembly - rear paper jam clean out door assembly.
C4662A-Drive_AssyDrive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.
C4662A-Drive_Assy_ADFDrive Assy ADF - Media chassis assembly (paper drive) - moves paper from ADF assembly to scanner assembly - includes media chassis, rollers, gears, flag, sensor, deflector, cable, springs
C3828AFilm - Film (Transparency) for OfficeJet R65 Series, PhotoSmart P1000, PhotoSmart P1100, OfficeJet G55 Series Transparency Film 200 SHEETS.
C3832AFilm - Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package
C3834AFilm - Film (Transparency) for DeskJet 1600 Series, DeskJet 2000 Series, DeskJet 800 Series, DeskJet 600 Series
C3835AFilm - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series
C3835SFilm - HP Premium Trans Film 250 Sht Value Pack
C3836AFilm - Premium High-Gloss Film - A size (8.5 x 11-inches) - 50 sheets
C3837AFilm - Film (Glossy) for DeskJet 1600 Series, OfficeJet 700 Series, DeskJet 895, DeskJet 895 Series
C6051AFilm - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series
C6053AFilm - Film (Transparency) for Color InkJet cp1700 Series, DeskJet 1180 Series, DeskJet 9300 Series, DeskJet 1280 Series
C2890-40050Flag - Width sensor flag - Mounts in the main PC board
C2890-40108Flag - OOPS flag - Media sensor - Mounts on top of the paper guide between the right and center pinch rollers
C4662A-Flag_ADFFlag ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounths on the front frame of the ADF paper pickup assembly
C2890-69177Print Mechanism - Print mechanism - Does not include automatic document feeder parts, paper drive assembly parts, scanner parts, or trays
C4662A-Print_MchnsmPrint Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
C4662A-Repair_InkJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C2170-00002Retainer - Carriage rod retainer - Holds left end of carriage rod
C2162-20005Rod - Carriage rod - Supports horizontal carriage movement
C4662A-Roller_PickupRoller Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray
C4661-60008Scanner - Scanner module assembly - Includes lens cover, scanner LED array, LED window, and scanner module assembly base
C4662A-ScannerScanner - Copier scanner (optical) assembly - includes scanner assembly only scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.
C4662A-Scanner_AssyScanner Assembly - Copier scanner & glass assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.
C4662A-Scanner_CableScanner Cable - Flex circuit cable which connects to the scanner assembly. also known as flat cable, this cable moves along with the scanner unit (side to side) as it scans documents.
C4662A-Sensor_ADFSensor ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly
C4662A-SeparatorSeparator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
C4662A-GuideService Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
C2890-60080Service Station - Service station assembly - Includes service station base (frame) and sled retainer
C4662A-Service_StationService Station - Service station assembly - for conditioning the printheads when the carriage is in its home position
C2128-00002Spring - Kicker spring - Provides tension for the kicker
C2128-00003Spring - Helper spring - Used to lift the pressure plate assembly
C2128-00006Spring - Separator spring - Provides pressure between the separator assembly and the center drive roller
C2890-00104Spring - Stripper spring - Holds pressure against separation pad
C2890-20006Spring - Lever arm spring - Provides tension between the lever arm and the pressure plate lifter
C2890-80014Spring - Clutch spring for HP OfficeJet 300 Series
C4662A-Spring_CmprsnSpring Compression - Compression spring - on pulley wedge for carriage belt tension
C6822AStickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C6823AStickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C2124-80008Strip - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position